The scope and sequence of growth factor delivery for vascularized bone tissue regeneration.

Bone regeneration is a complex process, that in vivo, requires the highly coordinated presentation of biochemical cues to promote the various stages of angiogenesis and osteogenesis. Taking inspiration from the natural healing process, a wide variety of growth factors are currently being released within next generation tissue engineered scaffolds (in a variety of ways) in order to heal non-union fractures and bone defects. This review will focus on the delivery of multiple growth factors to the bone regeneration niche, specifically 1) dual growth factor delivery signaling and crosstalk, 2) the importance of growth factor timing and temporal separation, and 3) the engineering of delivery systems that allow for temporal control over presentation of soluble growth factors. Alternative methods for growth factor presentation, including the use of gene therapy and platelet-rich plasma scaffolds, are also discussed.

Crystallization and preliminary X-ray analysis of W120K mutant of streptavidin.

Bacterial streptavidin and chicken avidin are homotetrameric proteins that share an exceptionally high affinity towards the vitamin biotin. The biotin-binding sites in both proteins contain a crucial tryptophan residue contributed from an adjacent subunit. This particular tryptophan (W110 in avidin and W120 in streptavidin) plays an important role in both biotin binding and in the quaternary stabilities of the proteins. An intriguing naturally occurring alteration of tryptophan to lysine was previously described in the C-terminal domain of sea-urchin fibropellins, which share a relatively high sequence similarity with avidin and streptavidin. Avidin (Avm-W110K) and streptavidin (Savm-W120K) mutations show substantially reduced affinities towards biotin as well as the dissociation of their tetrameric structure into stable avidin and streptavidin dimers. Savm-W120K was crystallized at 293 K using the hanging-drop vapour-diffusion method. The crystals diffract to 1.7 A resolution using synchrotron radiation and belong to the monoclinic space group P2(1), with unit-cell parameters a = 50.43, b = 100.41, c = 52.51 A, beta = 112.12 degrees. The asymmetric unit contains four molecules of Savm-W120K, with a corresponding V(M) of 2.3 A(3) Da(-1) and a solvent content of 46%.

Subcellular distribution of glycanases and related components in Ruminococcus albus SY3 and their role in cell adhesion to cellulose.

AIMS: To compare the subcellular distribution of glycanase-related components between wild-type Ruminococcus albus SY3 and an adhesion-defective mutant, to identify their possible contribution to the adhesion process, and to determine their association with cellulosome-like complexes. METHODS AND RESULTS: Cell fractionation revealed that most of the cellulases and xylanases were associated with capsular and cell-wall fractions. SDS-PAGE and gel filtration indicated that most of the bacterial enzyme activity was not integrated into cellulosome-like complexes. The adhesion-defective mutant produced significantly less (5- to 10-fold) overall glycanase activity, and the 'true cellulase activity' appeared to be entirely confined to the cell membrane fractions. Antibodies specific for the cellulosomal scaffoldin of Clostridium thermocellum recognized a single 240 kDa band in R. albus SY3. CONCLUSIONS: The adhesion-defective mutant appeared to be blocked in exocellular transport of enzymes involved in true cellulase activity. A potential cellulosomal scaffoldin candidate was identified in R. albus SY3. SIGNIFICANCE AND IMPACT OF THE STUDY: Several glycanase-related proteins and more than one mechanism appear to be involved in the adhesion of R. albus SY3 to cellulose.

Chicken avidin exhibits pseudo-catalytic properties. Biochemical, structural, and electrostatic consequences.

Avidin and its bacterial analogue streptavidin exhibit similarly high affinities toward the vitamin biotin. The extremely high affinity of these two proteins has been utilized as a powerful tool in many biotechnological applications. Although avidin and streptavidin have similar tertiary and quaternary structures, they differ in many of their properties. Here we show that avidin enhances the alkaline hydrolysis of biotinyl p-nitrophenyl ester, whereas streptavidin protects this reaction even under extreme alkaline conditions (pH > 12). Unlike normal enzymatic catalysis, the hydrolysis reaction proceeds as a single cycle with no turnover because of the extremely high affinity of the protein for one of the reaction products (i.e. free biotin). The three-dimensional crystal structures of avidin (2 A) and streptavidin (2.4 A) complexed with the amide analogue, biotinyl p-nitroanilide, as a model for the p-nitrophenyl ester, revealed structural insights into the factors that enhance or protect the hydrolysis reaction. The data demonstrate that several molecular features of avidin are responsible for the enhanced hydrolysis of biotinyl p-nitrophenyl ester. These include the nature of a decisive flexible loop, the presence of an obtrusive arginine 114, and a newly formed critical interaction between lysine 111 and the nitro group of the substrate. The open conformation of the loop serves to expose the substrate to the solvent, and the arginine shifts the p-nitroanilide moiety toward the interacting lysine, which increases the electron withdrawing characteristics and consequent electrophilicity of the carbonyl group of the substrate. Streptavidin lacked such molecular properties, and analogous interactions with the substrate were consequently absent. The information derived from these structures may provide insight into the action of artificial protein catalysts and the evolution of catalytic sites in general.

Design and production of active cellulosome chimeras. Selective incorporation of dockerin-containing enzymes into defined functional complexes.

Defined chimeric cellulosomes were produced in which selected enzymes were incorporated in specific locations within a multicomponent complex. The molecular building blocks of this approach are based on complementary protein modules from the cellulosomes of two clostridia, Clostridium thermocellum and Clostridium cellulolyticum, wherein cellulolytic enzymes are incorporated into the complexes by means of high-affinity species-specific cohesin-dockerin interactions. To construct the desired complexes, a series of chimeric scaffoldins was prepared by recombinant means. The scaffoldin chimeras were designed to include two cohesin modules from the different species, optionally connected to a cellulose-binding domain. The two divergent cohesins exhibited distinct specificities such that each recognized selectively and bound strongly to its dockerin counterpart. Using this strategy, appropriate dockerin-containing enzymes could be assembled precisely and by design into a desired complex. Compared with the mixture of free cellulases, the resultant cellulosome chimeras exhibited enhanced synergistic action on crystalline cellulose.

Nonproteolytic cleavage of aspartyl proline bonds in the cellulosomal scaffoldin subunit from Clostridium thermocellum.

Previous work from our group [Morage (Morgenstern), E., Bayer, E. A., and Lamed, R. (1991), Appl. Biochem. Biotechnol. 30, 129-136] has demonstrated an anomalous electrophoretic mobility pattern for scaffoldin, the 210-kDa cellulosome-integrating subunit of Clostridium thermocellum. Subsequent evidence [Morag, E., Bayer, E. A., and Lamed, R. (1992), Appl. Biochem. Biotechnol. 33, 205-217] indicated that the effect could be attributed to a nonproteolytic fragmentation of the subunit into a defined series of lower-molecular-weight bands. In the present work, a recombinant segment of the scaffoldin subunit was employed to determine the site(s) of bond breakage. An Asp-Pro sequence within the cohesin domain was identified to be the sensitive peptide bond. This sequence appears quite frequently in the large cellulosomal proteins, and the labile bond may be related to an as yet undescribed physiological role in the hydrolysis of cellulose by cellulosomes.

Cellulosomal scaffoldin-like proteins from Ruminococcus flavefaciens.

Two tandem cellulosome-associated genes were identified in the cellulolytic rumen bacterium, Ruminococcus flavefaciens. The deduced gene products represent multimodular scaffoldin-related proteins (termed ScaA and ScaB), both of which include several copies of explicit cellulosome signature sequences. The scaB gene was completely sequenced, and its upstream neighbor scaA was partially sequenced. The sequenced portion of scaA contains repeating cohesin modules and a C-terminal dockerin domain. ScaB contains seven relatively divergent cohesin modules, two extremely long T-rich linkers, and a C-terminal domain of unknown function. Collectively, the cohesins of ScaA and ScaB are phylogenetically distinct from the previously described type I and type II cohesins, and we propose that they define a new group, which we designated here type III cohesins. Selected modules from both genes were overexpressed in Escherichia coli, and the recombinant proteins were used as probes in affinity-blotting experiments. The results strongly indicate that ScaA serves as a cellulosomal scaffoldin-like protein for several R. flavefaciens enzymes. The data are supported by the direct interaction of a recombinant ScaA cohesin with an expressed dockerin-containing enzyme construct from the same bacterium. The evidence also demonstrates that the ScaA dockerin binds to a specialized cohesin(s) on ScaB, suggesting that ScaB may act as an anchoring protein, linked either directly or indirectly to the bacterial cell surface. This study is the first direct demonstration in a cellulolytic rumen bacterium of a cellulosome system, mediated by distinctive cohesin-dockerin interactions.

Cohesin-dockerin interaction in cellulosome assembly: a single hydroxyl group of a dockerin domain distinguishes between nonrecognition and high affinity recognition.

The assembly of enzyme components into the cellulosome complex is dictated by the cohesin-dockerin interaction. In a recent article (Mechaly, A., Yaron, S., Lamed, R., Fierobe, H.-P., Belaich, A., Belaich, J.-P., Shoham, Y., and Bayer, E. A. (2000) Proteins 39, 170-177), we provided experimental evidence that four previously predicted dockerin residues play a decisive role in the specificity of this high affinity interaction, although additional residues were also implicated. In the present communication, we examine further the contributing factors for the recognition of a dockerin by a cohesin domain between the respective cellulosomal systems of Clostridium thermocellum and Clostridium cellulolyticum. In this context, the four confirmed residues were analyzed for their individual effect on selectivity. In addition, other dockerin residues were discerned that could conceivably contribute to the interaction, and the suspected residues were similarly modified by site-directed mutagenesis. The results indicate that mutation of a single residue from threonine to leucine at a given position of the C. thermocellum dockerin differentiates between its nonrecognition and high affinity recognition (K(a) approximately 10(9) m(-1)) by a cohesin from C. cellulolyticum. This suggests that the presence or absence of a single decisive hydroxyl group is critical to the observed biorecognition. This study further implicates additional residues as secondary determinants in the specificity of interaction, because interconversion of selected residues reduced intraspecies self-recognition by at least three orders of magnitude. Nevertheless, as the latter mutageneses served to reduce but not annul the cohesin-dockerin interaction within this species, it follows that other subtle alterations play a comparatively minor role in the recognition between these two modules.

Biotin induces tetramerization of a recombinant monomeric avidin. A model for protein-protein interactions.

Chicken avidin, a homotetramer that binds four molecules of biotin was converted to a monomeric form by successive mutations of interface residues to alanine. The major contribution to monomer formation was the mutation of two aspartic acid residues, which together account for ten hydrogen bonding interactions at the 1-4 interface. Mutation of these residues, together with the three hydrophobic residues at the 1-3 interface, led to stable monomer formation in the absence of biotin. Upon addition of biotin, the monomeric avidin reassociated to the tetramer, which exhibited properties similar to those of native avidin, with respect to biotin binding, thermostability, and protease resistance. To our knowledge, these unexpected results represent the first example of a small monovalent ligand that induces oligomerization of a monomeric protein. This study may suggest a biological role for low molecular weight ligands in inducing oligomerization and in maintaining the stability of multimeric protein assemblies.

Structure of a family IIIa scaffoldin CBD from the cellulosome of Clostridium cellulolyticum at 2.2 A resolution.

The crystal structure of the family IIIa cellulose-binding domain (CBD) from the cellulosomal scaffoldin subunit (CipC) of Clostridium cellulolyticum has been determined. The structure reveals a nine-stranded jelly-roll topology which exhibits distinctive structural elements consistent with family III CBDs that bind crystalline cellulose. These include a well conserved calcium-binding site, a putative cellulose-binding surface and a conserved shallow groove of unknown function. The CipC CBD structure is very similar to the previously elucidated family IIIa CBD from the CipA scaffoldin of C. thermocellum, with some minor differences. The CipC CBD structure was also compared with other previously described CBD structures from families IIIc and IV derived from the endoglucanases of Thermomonospora fusca and Cellulomonas fimi, respectively. The possible functional consequences of structural similarities and differences in the shallow groove and cellulose-binding faces among various CBD families and subfamilies are discussed.

A labeling, detection, and purification system based on 4-hydroxyazobenzene-2-carboxylic acid: an extension of the avidin-biotin system.

We introduce a new nonradioactive, chromogenic label based on 4-hydroxyazobenzene-2-carboxylic acid (HABA), which is suitable for bioanalytical application, e.g., detection, localization, isolation, and purification. The HABA label is superior to other systems where it is difficult to separate labeled from unlabeled molecules or to determine the amount of label. HABA is readily detected spectroscopically by its absorption at 350 nm or by its interaction with avidin that results in a red shift to 500 nm. The HABA reagents described can be conjugated to a variety of functional groups on biomolecules and purified thereafter by affinity chromatography on an avidin column. The interaction of the HABAylated biomolecules with their corresponding targets is detected with high-affinity anti-HABA antibodies or with avidin. The nonradioactive, chromogenic HABA-based reagents form a homogeneous system that can complement or replace systems where facile quantification of the label is desired.

A scaffoldin of the Bacteroides cellulosolvens cellulosome that contains 11 type II cohesins.

A cellulosomal scaffoldin gene, termed cipBc, was identified and sequenced from the mesophilic cellulolytic anaerobe Bacteroides cellulosolvens. The gene encodes a 2,292-residue polypeptide (excluding the signal sequence) with a calculated molecular weight of 242,437. CipBc contains an N-terminal signal peptide, 11 type II cohesin domains, an internal family III cellulose-binding domain (CBD), and a C-terminal dockerin domain. Its CBD belongs to family IIIb, like that of CipV from Acetivibrio cellulolyticus but unlike the family IIIa CBDs of other clostridial scaffoldins. In contrast to all other scaffoldins thus far described, CipBc lacks a hydrophilic domain or domain X of unknown function. The singularity of CipBc, however, lies in its numerous type II cohesin domains, all of which are very similar in sequence. One of the latter cohesin domains was expressed, and the expressed protein interacted selectively with cellulosomal enzymes, one of which was identified as a family 48 glycosyl hydrolase on the basis of partial sequence alignment. By definition, the dockerins, carried by the cellulosomal enzymes of this species, would be considered to be type II. This is the first example of authentic type II cohesins that are confirmed components of a cellulosomal scaffoldin subunit rather than a cell surface anchoring component. The results attest to the emerging diversity of cellulosomes and their component sequences in nature.

Cohesin-dockerin recognition in cellulosome assembly: experiment versus hypothesis.

The cohesin-dockerin interaction provides the basis for incorporation of the individual enzymatic subunits into the cellulosome complex. In a previous article (Pagés et al., Proteins 1997;29:517-527) we predicted that four amino acid residues of the approximately 70-residue dockerin domain would serve as recognition codes for binding to the cohesin domain. The validity of the prediction was examined by site-directed mutagenesis of the suspected residues, whereby the species-specificity of the cohesin-dockerin interaction was altered. The results support the premise that the four residues indeed play a role in biorecognition, while additional residues may also contribute to the specificity of the interaction. Proteins 2000;39:170-177.

Recombinant NeutraLite avidin: a non-glycosylated, acidic mutant of chicken avidin that exhibits high affinity for biotin and low non-specific binding properties.

A recombinant non-glycosylated and acidic form of avidin was designed and expressed in soluble form in baculovirus-infected insect cells. The mutations were based on the same principles that guided the design of the chemically and enzymatically modified avidin derivative, known as NeutraLite Avidin. In this novel recombinant avidin derivative, five out of the eight arginine residues were replaced with neutral amino acids, and two of the lysine residues were replaced by glutamic acid. In addition, the carbohydrate-bearing asparagine-17 residue was altered to an isoleucine, according to the known sequences of avidin-related genes. The resultant mutant protein, termed recombinant NeutraLite Avidin, exhibited superior properties compared to those of avidin, streptavidin and the conventional NeutraLite Avidin, prepared by chemo-enzymatic means. In this context, the recombinant mutant is a single molecular species, which possesses strong biotin-binding characteristics. Due to its acidic pI, it is relatively free from non-specific binding to DNA and cells. The recombinant NeutraLite Avidin retains seven lysines per subunit, which are available for further conjugation and derivatization.

Cellulosome-like sequences in Archaeoglobus fulgidus: an enigmatic vestige of cohesin and dockerin domains.

The distribution of cellulosomal cohesin domains among the sequences currently compiled in various sequence databases was investigated. Two cohesin domains were detected in two consecutive open reading frames (ORFs) of the recently sequenced genome of the archaeon Archaeoglobus fulgidus. Otherwise, no cohesin-like sequence could be detected in organisms other than those of the Eubacteria. One of the A. fulgidus cohesin-containing ORFs also harbored a dockerin domain, but the additional modular portions of both genes are undefined, both with respect to sequence homology and function. It is currently unclear what function(s) the putative cohesin and dockerin-containing proteins play in the life cycle of this organism. In particular, since A. fulgidus contains no known glycosyl hydrolase gene, the presence of a cellulosome can be excluded. The results suggest that cohesin and dockerin signature sequences cannot be used alone for the definitive identification of cellulosomes in genomes.

Mutation of a critical tryptophan to lysine in avidin or streptavidin may explain why sea urchin fibropellin adopts an avidin-like domain.

Sea urchin fibropellins are epidermal growth factor homologues that harbor a C-terminal domain, similar in sequence to hen egg-white avidin and bacterial streptavidin. The fibropellin sequence was used as a conceptual template for mutation of designated conserved tryptophan residues in the biotin-binding sites of the tetrameric proteins, avidin and streptavidin. Three different mutations of avidin, Trp-110-Lys, Trp-70-Arg and the double mutant, were expressed in a baculovirus-infected insect cell system. A mutant of streptavidin, Trp-120-Lys, was similarly expressed. The homologous tryptophan to lysine (W-->K) mutations of avidin and streptavidin were both capable of binding biotin and biotinylated material. Their affinity for the vitamin was, however, significantly reduced: from K(d) approximately 10(-15) M of the wild-type tetramer down to K(d) approximately 10(-8) M for both W-->K mutants. In fact, their binding to immobilized biotin matrices could be reversed by the presence of free biotin. The Trp-70-Arg mutant of avidin bound biotin very poorly and the double mutant (which emulates the fibropellin domain) failed to bind biotin at all. Using a gel filtration fast-protein liquid chromatography assay, both W-->K mutants were found to form stable dimers in solution. These findings may indicate that mimicry in the nature of the avidin sequence and fold by the fibropellins is not designed to generate biotin-binding, but may serve to secure an appropriate structure for facilitating dimerization.

Matrix-assisted refolding of single-chain Fv- cellulose binding domain fusion proteins.

We describe a method for the isolation of recombinant single-chain antibodies in a biologically active form. The single-chain antibodies are fused to a cellulose binding domain as a single-chain protein that accumulates as insoluble inclusion bodies upon expression in Escherichia coli. The inclusion bodies are then solubilized and denatured by an appropriate chaotropic solvent, then reversibly immobilized onto a cellulose matrix via specific interaction of the matrix with the cellulose binding domain (CBD) moiety. The efficient immobilization that minimizes the contact between folding protein molecules, thus preventing their aggregation, is facilitated by the robustness of the Clostridium thermocellum CBD we use. This CBD is unique in retaining its specific cellulose binding capability when solubilized in up to 6 M urea, while the proteins fused to it are fully denatured. Refolding of the fusion proteins is induced by reducing with time the concentration of the denaturing solvent while in contact with the cellulose matrix. The refolded single-chain antibodies in their native state are then recovered by releasing them from the cellulose matrix in high yield of 60% or better, which is threefold or higher than the yield obtained by using published refolding protocols to recover the same scFvs. The described method should have general applicability for the production of many protein-CBD fusions in which the fusion partner is insoluble upon expression.

A novel cellulosomal scaffoldin from Acetivibrio cellulolyticus that contains a family 9 glycosyl hydrolase.

A novel cellulosomal scaffoldin gene, termed cipV, was identified and sequenced from the mesophilic cellulolytic anaerobe Acetivibrio cellulolyticus. Initial identification of the protein was based on a combination of properties, including its high molecular weight, cellulose-binding activity, glycoprotein nature, and immuno-cross-reactivity with the cellulosomal scaffoldin of Clostridium thermocellum. The cipV gene is 5,748 bp in length and encodes a 1,915-residue polypeptide with a calculated molecular weight of 199,496. CipV contains an N-terminal signal peptide, seven type I cohesin domains, an internal family III cellulose-binding domain (CBD), and an X2 module of unknown function in tandem with a type II dockerin domain at the C terminus. Surprisingly, CipV also possesses at its N terminus a catalytic module that belongs to the family 9 glycosyl hydrolases. Sequence analysis indicated the following. (i) The repeating cohesin domains are very similar to each other, ranging between 70 and 90% identity, and they also have about 30 to 40% homology with each of the other known type I scaffoldin cohesins. (ii) The internal CBD belongs to family III but differs from other known scaffoldin CBDs by the omission of a 9-residue stretch that constitutes a characteristic loop previously associated with the scaffoldins. (iii) The C-terminal type II dockerin domain is only the second such domain to have been discovered; its predicted "recognition codes" differ from those proposed for the other known dockerins. The putative calcium-binding loop includes an unusual insert, lacking in all the known type I and type II dockerins. (iv) The X2 module has about 60% sequence homology with that of C. thermocellum and appears at the same position in the scaffoldin. (v) Unlike the other known family 9 catalytic modules of bacterial origin, the CipV catalytic module is not accompanied by a flanking helper module, e.g., an adjacent family IIIc CBD or an immunoglobulin-like domain. Comparative sequence analysis of the CipV functional modules with those of the previously sequenced scaffoldins provides new insight into the structural arrangement and phylogeny of this intriguing family of microbial proteins. The modular organization of CipV is reminiscent of that of the CipA scaffoldin from C. thermocellum as opposed to the known scaffoldins from the mesophilic clostridia. The phylogenetic relationship of the different functional modules appears to indicate that the evolution of the scaffoldins reflects a collection of independent events and mechanisms whereby individual modules and other constituents are incorporated into the scaffoldin gene from different microbial sources.

The cellulosome concept as an efficient microbial strategy for the degradation of insoluble polysaccharides.

The cellulosome is an extracellular supramolecular machine that can efficiently degrade crystalline cellulosic substrates and associated plant cell wall polysaccharides. The cellulosome arrangement can also promote adhesion to the insoluble substrate, thus providing individual microbial cells with a direct competitive advantage in the utilization of the soluble hydrolysis products.

Digestion of crystalline cellulose substrates by the clostridium thermocellum cellulosome: structural and morphological aspects.

The action of cellulosomes from Clostridium thermocellum on model cellulose microfibrils from Acetobacter xylinum and cellulose microcrystals from Valonia ventricosa was investigated. The biodegradation of these substrates was followed by transmission electron microscopy, Fourier-transform IR spectroscopy and X-ray diffraction analysis, as a function of the extent of degradation. The cellulosomes were very effective in catalysing the complete digestion of bacterial cellulose, but the total degradation of Valonia microcrystals was achieved more slowly. Ultrastructural observations during the digestion process suggested that the rapid degradation of bacterial cellulose was the result of a very efficient synergistic action of the various enzymic components that are attached to the scaffolding protein of the cellulosomes. The degraded Valonia sample assumed various shapes, ranging from thinned-down microcrystals to crystals where one end was pointed and the other intact. This complexity may be correlated with the multi-enzyme content of the cellulosomes and possibly to a diversity of the cellulosome composition within a given batch. Another aspect of the digestion of model celluloses by cellulosomes is the relative invariability of their crystallinity, together with their Ialpha/Ibeta composition throughout the degradation process. Comparison of the action of cellulosomes with that of fungal enzymes indicated that the degradation of cellulose crystals by cellulosomes occurred with only limited levels of processivity, in contrast with the observations reported for fungal enzymes. The findings were consistent with a mechanism whereby initial attack by a cellulosome of an individual cellulose crystal results in its 'commitment' towards complete degradation.