RESUMO
We report on two-photon absorption measurements at 213 nm of deep UV transmissible media, including LiF, MgF2, CaF2, BaF2, sapphire (Al2O3), and high-purity grades of fused-silica (SiO2). A high-stability 24 ps Nd:YAG laser operating at the 5th harmonic (213 nm) was used to generate a high-intensity, long-Rayleigh-length Gaussian focus inside the samples. The measurements of the fluoride crystals and sapphire indicate two-photon absorption coefficients between 0.004 and 0.82 cm/GW. We find that different grades of fused silica performed near identically for two-photon absorption; however, there are differences in linear losses associated with purity. A low two-photon absorption cross section is measured for MgF2, making it an ideal material for the propagation of high-intensity deep UV lasers.
RESUMO
Ytterbium-doped Sr(5)(PO(4))(3)F was successfully lased at 985 nm in quasi-cw mode with a slope efficiency of 74% and an absorbed threshold energy of 18 mJ. Q-switched slope efficiencies of 21% were obtained with a maximum energy of 9.4 mJ in 8.8-ns pulses.
RESUMO
We report on the experimental measurement of the saturated gain of Yb(3+):Sr(5)(PO(4))(3)F at the 1047-nm laser line as a function of pump fluence and probe energy. The emission line was accurately modeled as a single homogeneous extraction, yielding values of 6.2 x 10(-20) cm(2) for the emission cross section and 3.3 J/cm(2) for the saturation fluence.
RESUMO
The stimulated Raman-scattering (SRS) gain coefficient has been measured quantitatively for the first time to our knowledge in Yb:Sr(5)(PO(4))(3)F to be 1.23 ? 0.12 cm/GW at 1053 nm. These data, along with surface and bulk losses, feedback that is due to surface reflections, gain saturation, and bandwidth, have been applied to a quantitative model that predicts the effects of SRS within a laser amplifier system where the laser gain media show SRS gain. Limitations and impact to the laser amplifier performance are discussed, along with possible techniques to reduce SRS loss.