RESUMO
Transparent, pyridine-functionalized sol-gel monoliths have been formed and their use in Cr(VI) sensing applications is demonstrated. The monoliths were immersed in acidic Cr(VI)-containing solutions, and the Cr(VI) uptake was monitored using UV-vis and atomic absorption spectroscopies. At concentrations at the ppm level, the monoliths exhibit a yellow color change characteristic of Cr(VI) uptake, and this can be measured by monitoring the absorption change at about 350 nm using UV-vis spectroscopy. Concentrations at the ppb level are below the limit of detection using this wavelength of 350 nm for measurement. However, by adding a diphenylcarbazide solution to monoliths that have been previously immersed in ppb-level Cr(VI) solutions, a distinct color change takes place within the gels that can be measured at about 540 nm using UV-vis spectroscopy. Concentrations as low as 10 ppb Cr(VI) can be measured using this method. The monoliths can then be regenerated for subsequent sensing cycles by thorough washing with 6.0M HCl. The factors affecting monolith uptake of Cr(VI) have been explored. In addition, the gels have been characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) measurements.
Assuntos
Cromo/química , Géis , Óptica e FotônicaRESUMO
Optical sensors for the determination of highly concentrated bases such as NaOH (1-10 M) and materials to make these sensors have been characterized by X-ray photoelectron spectroscopy, 29Si solid-state NMR, FT-IR, and measurements of film porosity, surface area, and thickness. The bonding character and composition of the Si-Zr mixed oxides-organic polymer composites were evaluated. These studies suggest that there are Si-O-Zr matrixes in the mixed oxides, and that the Si-O-Zr matrixes contribute to the durability of the base sensors in highly alkaline solutions. The performance of these base sensors has been studied in detail as well. These sensors were stable for approximately 120 days, exhibited short response times (typically <10 s), and were fully reversible with minimal hysteresis effects in NaOH-ROH-H2O solutions (R = Me, Et, and i-Pr).
RESUMO
Reactions of d0 amides M(NMe2)4 (M = Zr, 1; Hf, 2) with O2 have been found to yield unusual trinuclear oxo aminoxide complexes M3(NMe2)6(mu-NMe2)3(mu3-O)(mu3-ONMe2) (M = Zr, 3; Hf, 4) in high yields. Tetramethylhydrazine Me2N-NMe2 was also observed in the reaction mixtures. Crystal structures of 3 and 4 have been determined. Density functional theory calculations have been performed to explore the mechanistic pathways in the reactions of model complexes Zr(NR2)4 (R = H, 5; Me, 1) and [Zr(NR2)4]2 (R = H, 5a; Me, 1a) with triplet O2. Monomeric and dimeric reaction pathways in the formation of the Zr complex 3 are proposed.
RESUMO
A dual-transducer approach based on sol-gel optical sensors was recently reported to measure acid and salt concentrations, C(acid) and C(salt), in concentrated aqueous LiCl-HCl, CaCl2-HCl, and AlCl3-HCl solutions (C(acid) at 5-6 M; C(salt) < or = 2 M). The scope of this new approach has been studied in salt-containing HCl solutions with C(acid) at 2-9 M, and factors that influence sensor responses and accuracy have been investigated. A linear relationship between (deltaA/deltaC(salt))C(acid) and (dA/dC(acid))C(salt)=0, which is the basis of this dual-transducer approach, was found to lead to an empirical linear relationship between (deltaH0)C(acid) and (deltaC(salt))C(acid) (H0: Hammett acidity function of the indicator encapsulated in the sensor).