Severe maternal morbidity in Scotland.

Using a cohort study design, we analysed 17 diagnoses and 9 interventions (including critical care admission) as a composite measure of severe maternal morbidity for pregnancies recorded over 14 years in Scotland. There were 762,918 pregnancies, of which 7947 (10 in 1000 pregnancies) recorded 9345 severe maternal morbidity events, 2802 episodes of puerperal sepsis being the most common (30%). Severe maternal morbidity incidence increased from 9 in 1000 pregnancies in 2012 to 17 in 1000 pregnancies in 2018, due in part to puerperal sepsis recording. The odds ratio (95%CI) for severe maternal morbidity was higher for: older women, for instance 1.22 (1.13-1.33) for women aged 35-39 years and 1.44 (1.27-1.63) for women aged > 40 years compared with those aged 25-29 years; obese women, for instance 1.13 (1.06-1.21) for BMI 30-40 kg.m-2 and 1.32 (1.15-1.51) for BMI > 40 kg.m-2 compared with BMI 18.5-24.9 kg.m-2 ; multiple pregnancy, 2.39 (2.09-2.74); and previous caesarean delivery, 1.52 (1.40-1.65). The median (IQR [range]) hospital stay was 3 (2-5 [1-8]) days with severe maternal morbidity and 2 (1-3 [1-5]) days without. Forty-one women died during pregnancy or up to 42 days after delivery, representing mortality rates per 100,000 pregnancies of about 365 with severe maternal morbidity and 1.6 without. There were 1449 women admitted to critical care, 807 (58%) for mechanical ventilation or support of at least two organs. We recorded an incidence of severe maternal morbidity higher than previously published, possibly because sepsis was coded inaccurately in our databases. Further research may determine the value of this composite measure of severe maternal morbidity.

Effect of Tooth-Whitening Procedures on Stained Composite Resins.

In this laboratory study, a composite resin was stained to a visibly discernible level using both coffee and red wine over 14 days (change was considered clinically noticeable and significant when ΔEab*≥2.7). Color change was measured at one, three, seven, and 14 days of staining. Although the nature of color change was different for the two staining solutions, the overall degree of staining (ΔEab*) rendered by either coffee or wine at each time interval was not significantly different ( p≥0.05). Four whitening protocols were applied to stained composites. Treatment included applications of distilled water (control), Crest Pro-Health [HD] toothpaste, Crest Whitestrips, Opalescence PF bleach (15%), and application of a fine pumice polishing (Preppies). HD toothpaste and Whitestrips were applied daily for 21 days, Opalescence was applied daily for 10 days, and polishing was applied once. Each of the whitening products, applied in a manner simulating at-home or in-office treatment, was effective in producing color improvements (lightening) over controls ( p<0.05), but none of the four treatments produced lightening that was significantly different from the other treatments ( p≥0.05). A comparison of final composite color with that measured at baseline showed that Opalescence returned composite color to an acceptable level following exposure to both staining solutions (ΔEab*<2.7), Whitestrips returned color close to baseline for wine-stained composites, and HD paste and polishing permitted residual stain to remain (ΔEab*≥2.7).

Augmented adenovirus transduction of murine T lymphocytes utilizing a bi-specific protein targeting murine interleukin 2 receptor.

Correction to: Cancer Gene Therapy (2013) 20, 445­452; doi:10.1038/cgt.2013.39; published online 9 August 2013. Laura Timares was unintentionally left off the list of authors. She should have been listed along with her affiliation, Department of Dermatology, University of Alabama at Birmingham, Birmingham, AL, USA. Her NIH funding sources, R21AR055252 and P30AR050948 should also have been listed. The authors regret the errors.

Augmented adenovirus transduction of murine T lymphocytes utilizing a bi-specific protein targeting murine interleukin 2 receptor.

Adenoviruses are currently used in a variety of bench and bedside applications. However, their employment in gene delivery to lymphocyte lineages is hampered by the lack of coxsackie virus and adenovirus receptor (CAR) on the cell surface. Exploitation of an alternative receptor on the surface of T lymphocytes can allow for utilization of adenovirus in a variety of T lymphocyte-based diseases and therapies. Here, we describe how resistance to infection can be overcome by the utilization of a bi-specific fusion protein, soluble CAR murine interleukin 2 (sCAR-mIL-2), that retargets adenovirus to the murine IL-2 receptor (IL-2R). Infection of a murine T-cell line, CTLL-2, with a sCAR-mIL-2/Adenovirus conjugate provided a ninefold increase in both green fluorescence protein-positive cells and luciferase expression. In addition, this increase in infection was also seen in isolated primary murine T lymphocytes. In this context, the sCAR-mIL-2 adapter provided a fourfold gene transduction increase in activated primary murine T lymphocytes. Our results show that recombinant sCAR-mIL-2 fusion protein promotes IL-2R-targeted gene transfer to murine T lymphocytes and that alternative targeting can abrogate their native resistance to infection.

Evaluating anisotropic properties in the porcine temporomandibular joint disc using nanoindentation.

The objective of this study was to determine the viscoelastic properties present within the intermediate zone of the porcine temporomandibular joint (TMJ) disc using nanoindentation. A 50-microm conospherical indenter tip using a displacement-controlled ramp function with a 600 nm/s loading and unloading rate, a 3000-nm peak displacement with a holding period of 30 s was used to indent the samples. Experimental load-relaxation tests were performed on the TMJ disc to determine the response in three different directions; the mediolateral, anteroposterior, and articular surface directions. The experimental data were analyzed using a generalized Maxwell model to obtain values for short- and long-time relaxation modulus and of material time constants. The short time relaxation modulus E ( I ) values were 180.92, 64.99, and 487.77 kPa for testing done on the articular surface, mediolateral, and anteroposterior directions, respectively. Corresponding values for the long-time relaxation modulus E (infinity) were 45.9, 14.97, and 133.5 kPa. The method confirmed anisotropy present within the central intermediate zone of the porcine TMJ disc due to the directional orientation of the collagen fibers.

Tractional forces on porcine temporomandibular joint discs.

Tractional forces on the temporomandibular joint (TMJ) disc predispose tissue fatigue. This study tested the hypotheses that tractional forces: (1) increased with stress-field velocity (V) and aspect ratio (AR, contact area diameter/cartilage thickness), and compressive strain (epsilon); and (2) varied depending on cartilage thickness. Porcine TMJ discs (n = 187) received a 10-N vertical static load via an acrylic indenter for 1, 5, 10, 30, or 60 sec, followed by movement. Physical data were recorded and analyzed by quadratic regression relations and a likelihood ratio test. Results showed non-linear increases in tractional forces that were positively correlated with increased V, AR, and epsilon when the stress-field moved onto relatively thicker (R(2) = 0.83) and thinner cartilage (R(2) = 0.86). When V was > 27 mm/sec and AR.epsilon(3), was > 0.09, tractional forces were significantly higher (< or = 12% of peak) when the stress-field moved onto thicker cartilage. Stress-field dynamic mechanics and cartilage thickness significantly affected TMJ disc tractional forces.

Static and dynamic mechanics of the temporomandibular joint: plowing forces, joint load and tissue stress.

OBJECTIVES - To determine the combined effects 1) of stress-field aspect ratio and velocity and compressive strain and 2) joint load, on temporomandibular joint (TMJ) disc mechanics. SETTING AND SAMPLE POPULATION - Fifty-two subjects (30 female; 22 male) participated in the TMJ load experiments. MATERIAL AND METHODS - In the absence of human tissue, pig TMJ discs were used to determine the effects of variables 1) on surface plowing forces, and to build a biphasic finite element model (bFEM) to test the effect of human joint loads and 2) on tissue stresses. In the laboratory, discs received a 7.6 N static load via an acrylic indenter before cyclic movement. Data were recorded and analysed using anova. To determine human joint loads, Research Diagnostic Criteria calibrated investigators classified subjects based on signs of disc displacement (DD) and pain (+DD/+pain, n = 18; +DD/-pain, n = 17; -DD/-pain, n = 17). Three-dimensional geometries were produced for each subject and used in a computer model to calculate joint loads. RESULTS - The combined effects of compressive strain, and aspect ratio and velocity of stress-field translation correlated with plowing forces (R(2) = 0.85). +DD/-pain subjects produced 60% higher joint loads (ANOVA, p < 0.05), which increased bFEM-calculated compressive strain and peak total normal stress. CONCLUSIONS - Static and dynamic variables of the stress-field and subject-dependent joint load significantly affect disc mechanics.

Large Salmonella Enteritidis outbreak with prolonged transmission attributed to an infected food handler, Texas, 2002.

In March 2002, an outbreak of Salmonella Enteritidis (SE) infections occurred at a convention centre in Dallas, Texas and continued for 6 weeks. We conducted epidemiological studies, obtained clinical and environmental cultures, and interviewed employees to identify risk factors for infection. From 17 March-25 April 2002, the implicated hotel kitchen catered 41 multi-day conferences attended by 9790 persons. We received 617 illness reports from residents of 46 states. Sauces or items served with sauces were implicated in three cohort studies. SE phage-type 8 was identified as the agent. Eleven food service employees, including one who prepared sauces and salsa, had stool cultures that yielded SE. Although the original source was not determined, prolonged transmission resulted in the largest food handler-associated outbreak reported to date, affecting persons from 46 US states. Transmission ended with implementation of policies to screen food handlers and exclude those whose stool cultures yielded salmonellas.

Sporadic paediatric diarrhoeal illness in urban and rural sites in Nyanza Province, Kenya.

OBJECTIVE: Investigate differences in the infectious aetiology, health seeking behaviour, and provider practices with regard to diarrhoeal illness among children presenting to urban versus rural clinics in Western Kenya. DESIGN: Laboratory-based, passive surveillance. SETTING: The urban portion of the study was conducted at the paediatric outpatient clinic of Nyanza Provincial Hospital in Kisumu. The rural portion of the study was conducted at four outpatient clinics in the Asembo Bay community approximately 20 kilometers west of Kisumu. SUBJECTS: Children aged less than five years presenting to medical facilities for the treatment of diarrhoea from October 2001-October 2003 at the urban site and May 1997-April 2003 for the rural sites. RESULTS: Among the 1303 urban and 1247 rural specimens collected, 24% of specimens yielded a bacterial pathogen (24% urban, 25% rural). Campylobacter was the predominant bacterial pathogen (17% urban, 15% rural), followed by Shigella and nontyphoidal Salmonella (both 4% urban and 5% rural). In both communities, susceptibilities of these pathogens to the most commonly prescribed antibiotics was low (< or = 50%); 70% of all episodes of diarrhoea were prescribed antibiotic treatment. Urban health practitioners prescribed fewer antibiotics, chose drugs more likely to be effective, and were more likely to prescribe oral rehydration therapy for bloody diarrhoea. CONCLUSION: Most characteristics of diarrhoeal disease and their causes were similar in paediatric patients presenting to urban and rural clinics. Urban providers were more compliant with WHO recommendations.

Static and dynamic loading effects on temporomandibular joint disc tractional forces.

UNLABELLED: Mechanical fatigue-related degeneration of the temporomandibular joint (TMJ) disc may be promoted by tractional forces. This study tested the hypotheses that tractional forces following static loading of the TMJ disc: (1) increase with compressive strain at the start of movement, and (2) are velocity-dependent during movement. Sixty-four porcine discs received a 10-N static load via an acrylic indenter for 1 or 30 sec before cyclic movement. Physical data were recorded and analyzed by ANOVA. The results showed that compressive strain and tractional forces were largest for the start of movement following 30 sec of static loading (p

Laboratory stresses and tractional forces on the TMJ disc surface.

The etiology of degenerative disease of the TMJ may involve fatigue produced by surface tractional forces and compressive stresses. This study tested the time-dependent effects of compressive loading and stress-field translation on TMJ disc-surface tractional forces and stresses. In laboratory experiments with 50 porcine discs, an acrylic indenter imposed 10 N static loads for 10 and 60 sec, followed by translation of the loaded indenter along the mediolateral axis of the disc. Maximum tractional forces were found to occur following 60 sec of static loading (p < 0.001), and increased with translation velocity (R(2) = 0.73); whereas maximum compressive stresses occurred after 10 sec of static loading (p < 0.001). Overall, the results were consistent with current mechanical theories of the time-dependent effects of compressive loading of cartilage.

Alfalfa sprouts and Salmonella Kottbus infection: a multistate outbreak following inadequate seed disinfection with heat and chlorine.

Raw sprouts have been implicated in a number of foodborne disease outbreaks. Because contaminated seeds are usually responsible, many sprout producers attempt to disinfect seeds before germination and detect sprout contamination during production. In March 2001, we detected an increased number of Salmonella serotype Kottbus isolates in California. Overall, we identified 31 cases from three western states. To identify the cause, we conducted a case-control study with the first 10 identified case-patients matched to 20 controls by age, sex, and residential area. Our case-control study found illness to be statistically associated with alfalfa sprout consumption. The traceback investigation implicated a single sprouter, where environmental studies yielded Salmonella Kottbus from ungerminated seeds and floor drains within the production facility. Pulsed-field gel electrophoresis patterns of all patient, seed, and floor drain Salmonella Kottbus isolates were indistinguishable. Most implicated sprouts were from seeds that underwent heat treatment and soaking with a 2,000-ppm sodium hypochlorite solution rather than the Food and Drug Administration (FDA)-recommended 20,000-ppm calcium hypochlorite soak. Other implicated seeds had been soaked in a calcium hypochlorite solution that, when tested, measured only 11,000 ppm. The outbreak might have been averted when screening tests of sprout irrigation water detected Salmonella in January; however, confirmatory testing of these samples was negative (but testing improperly utilized refrigerated irrigation water). Producers should use the enrichment broth of positive screening samples, not refrigerated irrigation water, for confirmatory testing. Until other effective disinfection technologies are developed, producers should adhere to FDA recommendations for sprout seed disinfection.

Strain rate dependent orthotropic properties of pristine and impulsively loaded porcine temporomandibular joint disk.

The purpose of this study was to characterize the tensile stress-strain behavior of the porcine temporomandibular joint (TMJ) disk with respect to collagen orientation and strain rate dependency. The apparent elastic modulus, ultimate tensile strength, and strain at maximum stress were measured at three elongation rates (0.5, 50, and 500 mm/min) for dumbbell-shaped samples oriented along either anteroposterior or mediolateral axes of the disks. In order to study the effects of impact-induced fissuring on the mechanical behavior, the same properties were measured along each orientation at an elongation rate of 500 mm/min for disks subjected to impulsive loads of 0.5 N. s. The results suggested a strongly orthotropic nature to the healthy pristine disk. The values for the apparent modulus and ultimate strength were 10-fold higher along the anteroposterior axis (p < or = 0.01), which represented the primary orientation of the collagen fibers. Strain rate dependency was evident for loading along the anteroposterior axis but not along the mediolateral axis. No significant differences in any property were noted between pristine and impulsively loaded disks for either orientation (p > 0.05). The results demonstrated the importance of choosing an orthotropic model for the TMJ disk to conduct finite element modeling, to develop failure criteria, and to construct tissue-engineered replacements. Impact-induced fissuring requires further study to determine if the TMJ disk is orthotropic with respect to fatigue.

Marketing the rural hospital-based laboratory: building a customer-centered outreach program.

Rural hospital laboratories, which operate 24 hours/day, 7 days/week to meet inpatient and emergency-room care requirements, are situated uniquely to provide outpatient laboratory services for their communities. Laboratory managers looking to augment current services should consider implementing an outreach program. This article will explore the marketing aspects involved with developing a customer-centered outreach program, including finding a market niche, developing a business plan using elements of the consumption chain, addressing customer service issues, and business plan testing and validation.

The effect of disc thickness and trauma on disc surface friction in the porcine temporomandibular joint.

The pathomechanics of osteoarthritis in the human temporomandibular joint (TMJ) are unknown. Compromised lubrication is a potential factor, but, lubrication within even the normal TMJ is not understood completely. Weeping lubrication is a concept that may be applicable to the TMJ. A characteristic of weeping lubrication is a slow increase in friction during static loading. The rate of increase in friction is related to the rate of lateral movement of synovial fluid away from the loading area. The TMJ disc is expected to be the main source of TMJ lubrication. This study tested two variables, disc thickness and magnitude of trauma to the disc, as factors that can affect the rate of flow of synovial fluid and thus alter lubrication of the disc surfaces. To test these variables, TMJ disc surface friction was measured before and after an impulse load. Before the impulse load, all discs demonstrated a gradual increase in friction during light static loading. The rate of increase in friction was inversely related to the disc thickness (R(2)=0.75). After an impulse load of known magnitude and peak force, disc surface friction was higher. The magnitude of this surface friction was correlated with the magnitude of the impulsive blow (R(2)=0.89) and the area of surface damage (R(2)=0.85). Disc thickness was a significant factor in determining the minimal impulse needed to produce higher surface friction (R(2)=0.99). These results confirm that disc thickness and trauma to the disc affect surface friction in the TMJ, and therefore may be important factors in compromised lubrication and the development of osteoarthritis.

Fructose-1,6-diphosphatase deficiency and glyceroluria: one possible etiology for GIS.

Fructose-1,6-diphosphatase (FDPase) deficiency is characterized by episodes of lactic acidemia, hypoglycemia, and ketonuria. Liver biopsy and subsequent enzyme analysis most reliably make the diagnosis. Review of the literature reveals 85 cases. Glycerol intolerance syndrome (GIS) is less well defined. There are only a handful of cases reported. We describe a patient with FDPase deficiency and significant glyceroluria and propose that GIS may be caused by partial deficiency of FDPase.

A survey measuring the degree of model compliance plan for clinical laboratories implementation in small/rural hospital laboratories.

The Office of the Inspector General published the Model Compliance Plan for Clinical Laboratories (MCPL) in February 1997. In March and April 1998, a survey of 200 Midwest hospital laboratory managers (hospital size < or = 200 beds) was performed to determine the degree to which their laboratories had implemented the various recommendations of the MCPL. Of the 200 surveys sent out, 76 were returned--a 38% response rate. Aspects of the survey were broken down into two categories: "Laboratory Manager Responsibility," those items that can be implemented independently by the laboratory manager; and "Administration Responsibility," those items requiring administration's direction. With the exception of rewriting job descriptions to include compliance issues, > or = 75% of the laboratory managers have implemented the items within their power.

Ultraviolet radiation-induced color shifts occurring in oil-pigmented maxillofacial elastomers.

STATEMENT OF PROBLEM: Oil-based pigments are added to a maxillofacial prosthesis either as base colorants present within the elastomer or as surface tints that are painted on with an adhesive. Color stability of the pigments and pigmented prosthetic materials on exposure to ultraviolet radiation are unknown. PURPOSE: This study measured DeltaE* color changes caused by ultraviolet radiation for materials colored with 5 oil pigments, applied either as base colorants (intrinsic) or surface tints (extrinsic) to a silicone elastomer. MATERIAL AND METHODS: One of 5 oil pigments was added to polydimethyl siloxane disks to serve as a base colorant (0.2 weight percent present throughout a 2 mm thick disk) or as a concentrated surface tint (2.0 weight percent concentrated in upper 0.3 mm thickness). Pigmented disks, along with pigment-only and elastomer-only control disks, were exposed to ultraviolet radiation for 400, 600 and 1800 hours. DeltaE* color changes were measured at baseline and for each time interval. RESULTS: Control samples underwent minimum color changes after 1800 hours (DeltaE*

Nickel release from orthodontic arch wires and cellular immune response to various nickel concentrations.

AIMS: Results from two previous clinical studies suggested that exposure to high nickel-containing orthodontic arch wires may induce hypersensitivity in certain individuals. The purpose of this study was to measure the amount of nickel released from three types of nickel-containing arch wires into a synthetic saliva in vitro, and determine if the concentrations were sufficient to elicit either cytotoxic (trypan blue exclusion test) or stimulatory (MTT test) responses in human peripheral blood mononuclear cells (PBMCs) derived from nickel-sensitive and nickel-nonsensitive individuals. PBMCs were exposed to five concentrations of nickel sulfate solutions ranging from 0-29 ppm, and results were compared, particularly at concentrations obtained from nickel release experiments. FINDINGS: The amount of nickel released into synthetic saliva ranged from 0.4-4.1 ppb. Wires subjected to a combination of soaking and cyclic straining released significantly more nickel than those that were soaked only (p