Wafer-level testing of inverse-designed and adjoint-inspired vertical grating coupler designs compatible with DUV lithography.

Perfectly vertical grating couplers have various applications in optical I/O such as connector design, coupling to multicore optical fibers and multilayer silicon photonics. However, it is challenging to achieve perfectly vertical coupling without simultaneously increasing reflection. In this paper, we use the adjoint method as well as an adjoint-inspired methodology to design devices that can be fabricated using only a single-etch step in a c-Si 193 nm DUV immersion lithography process, while maintaining good coupling and low reflection. Wafer-level testing of devices fabricated by a pilot line foundry confirms that both design paradigms result in state-of-the-art experimental insertion loss (<2 dB) and bandwidths (∼20 nm) while having only moderate in-band reflection (<-10 dB). Our best design has a (median) 1.82 dB insertion loss and 21.3 nm 1 dB-bandwidth.

Low-voltage high-performance flexible digital and analog circuits based on ultrahigh-purity semiconducting carbon nanotubes.

Carbon nanotube (CNT) thin-film transistor (TFT) is a promising candidate for flexible and wearable electronics. However, it usually suffers from low semiconducting tube purity, low device yield, and the mismatch between p- and n-type TFTs. Here, we report low-voltage and high-performance digital and analog CNT TFT circuits based on high-yield (19.9%) and ultrahigh purity (99.997%) polymer-sorted semiconducting CNTs. Using high-uniformity deposition and pseudo-CMOS design, we demonstrated CNT TFTs with good uniformity and high performance at low operation voltage of 3 V. We tested forty-four 2-µm channel 5-stage ring oscillators on the same flexible substrate (1,056 TFTs). All worked as expected with gate delays of 42.7 ± 13.1 ns. With these high-performance TFTs, we demonstrated 8-stage shift registers running at 50 kHz and the first tunable-gain amplifier with 1,000 gain at 20 kHz. These results show great potentials of using solution-processed CNT TFTs for large-scale flexible electronics.

Photon pair generation in hydrogenated amorphous silicon microring resonators.

We generate photon pairs in a-Si:H microrings using a CW pump, and find the Kerr coefficient of a-Si:H to be 3.73 ± 0.25 × 10-17m2/W. By measuring the Q factor with coupled power we find that the loss in the a-Si:H micro-rings scales linearly with power, and therefore cannot originate from two photon absorption. Theoretically comparing a-Si:H and c-Si micro-ring pair sources, we show that the high Kerr coefficient of this sample of a-Si:H is best utilized for microrings with Q factors below 103, but that for higher Q factor devices the photon pair rate is greatly suppressed due to the first order loss.

Error-free DWDM transmission and crosstalk analysis for a silicon photonics transmitter.

Individual channels of a five-channel microring silicon photonics transmitter are used for bit error ratio analysis and demonstrate error-free transmission at 10Gb/s. Two channels of the same transmitter are concurrently modulated using an 80GHz channel spacing comb laser and demonstrate open eye diagrams at 10Gb/s and 12.5Gb/s. Finally, concurrent modulation with tunable lasers is done to quantify optical power penalty for link bit error ratio versus channel spacing from +100GHz to -100GHz. When using a comb laser for concurrent modulation, no direct power penalty is observed for an 80GHz channel separation.

Wavefront distortion of the reflected and diffracted beams produced by the thermoelastic deformation of a diffraction grating heated by a Gaussian laser beam.

It may be advantageous in advanced gravitational-wave detectors to replace conventional beam splitters and Fabry-Perot input mirrors with diffractive elements. In each of these applications, the wavefront distortions produced by the absorption and subsequent heating of the grating can limit the maximum useful optical power. We present data on the wavefront distortions induced in a laser probe beam for both the reflected and diffracted beams from a grating that is heated by a Gaussian laser beam and compare these results to a simple theory of the wavefront distortions induced by thermoelastic deformations.

Radiative corrections and quantum gates in molecular systems.

We propose a method for quantum information processing using molecules coupled to an external laser field. This utilizes molecular interactions, control of the external field, and an effective energy shift of the doubly excited state of two coupled molecules. Such a level shift has been seen in the two-photon resonance experiments recently reported by Hettich et al. Here we show that this can be explained in terms of the QED Lamb shift. We quantify the performance of the proposed quantum logic gates in the presence of dissipative mechanisms. The unitary transformations required for performing one- and two-qubit operations can be implemented with present day molecular technology. The proposed techniques can also be applied to coupled quantum dot and biomolecular systems.