RESUMO
Fiber-reinforced composites are used as restorative materials for prosthetic oral rehabilitation. Gastroesophageal reflux disease (GERD) is an accustomed affection with various oral manifestations. This study aimed to evaluate the behavior of two high-performance CAD/CAM milled reinforced composites (Trinia™, TriLor) in artificial saliva at different pH levels through immersion tests, and to determine if changes in mass or surface morphology at variable pH, specific for patients affected by GERD, appear. After investigating the elemental composition and surface morphology, the specimens were immersed in Carter Brugirard artificial saliva for 21 days at different pH values (5.7, 7.6, and varying the pH from 5.7 to 3). The values of the weighed masses during the immersion tests were statistically processed in terms of mean and standard deviation. Results suggested that irrespective of the medium pH, the two composites presented a similar mass variation in the range of -0.18 (±0.01)-1.82 (±0.02) mg after immersion, suggesting their stability when in contact with artificial saliva, an aspect which was also highlighted by scanning electron microscope (SEM) analysis performed on the immersed surfaces. Novel composite biomaterials can be a proper alternative for metal alloys used for prosthetic frameworks in patients suffering from GERD.
RESUMO
Cobalt-chromium (Co-Cr) alloys are widely utilized in dentistry. The salivary pH is a significant factor, which affects the characteristics and the behavior of dental alloys through corrosion. This study aimed to evaluate the corrosion behavior in artificial saliva with different pH values (3, 5.7, and 7.6) of two commercial Co-Cr dental alloys manufactured by casting and by milling. Corrosion resistance was determined by the polarization resistance technique, and the tests were carried out at 37 ± 1 °C, in Carter Brugirard artificial saliva. After the electrochemical parameters, it can be stated that the cast Co-Cr alloy has the lowest corrosion current density, the highest polarization resistance, and the lowest speed of corrosion in artificial saliva with pH = 7.6. In the case of milled Co-Cr alloy, the same behavior was observed, but in artificial saliva with pH = 5.7, it recorded the most electropositive values of open circuit potential and corrosion potential. Although both cast and milled Co-Cr alloys presented a poorer corrosion resistance in artificial saliva with a more acidic pH value, the milled Co-Cr alloy had better corrosion behavior, making this alloy a better option for the prosthetic treatment of patients suffering from GERD.
RESUMO
The oral cavity has specific and individualized characteristics, with pH, saliva flow, buffer capacity, temperature, and microorganisms content influencing oral health. Currently, the prevalence of gastroesophageal reflux disease (GERD) is constantly increasing. The objective of this study was to evaluate and compare the saliva quantity at 5 min, salivary pH, and salivary buffer capacity in patients with and without GERD, necessary for establishing the correct dental treatment plan. A Saliva-Check Buffer (GC) kit was used for the determination of salivary variables. The total number of 80 patients included in the study were divided into a study group and a control group, each containing 40 patients. Saliva quantity at 5 min was lower in patients suffering from GERD. The salivary pH of these patients turned to acid values compared to the salivary pH of controls, where the values were within the normal range. In patients with GERD, the determined salivary buffer capacity was low or very low. The use of the Saliva-Check Buffer (GC) kit is a simple, easy, non-invasive and patient-accepted method, which can also be used in the dentist's office to assess the saliva buffer capacity and pH, variables that are important for establishing a correct dental treatment plan.
