RESUMO
Despite the numerous sensory, organoleptic and nutritional qualities, fish meat may also contain some toxic compounds with negative effects on human health. Polycyclic aromatic hydrocarbons (PAHs) are a class of chemicals resulting from incomplete combustion, found at high levels in thermally processed foods, especially in smoked fish. This research studied the influence of wood type (beech, plum and oak) and fish species (rainbow trout, carp and Siberian sturgeon) on PAH contamination in hot smoked fish. Benzo(a)Piren, Σ4PAHs and Σ15PAHs were considered as main indicators of PAH contamination. All-PAHs was quantified in all samples, indicating a specific dynamic of values due to the influence of variables. Generally, BaP (benzo(a)pyrene) content in the samples ranged from 0.11 µg/kg to 8.63 µg/kg, Σ4PAHs from 0.70 µg/kg to 45.24 µg/kg and Σ15PAHs from 17.54 µg/kg to 450.47 µg/kg. Thus, plum wood promoted the highest levels of PAHs, followed by oak and beech. Carp and Siberian sturgeon presented the highest concentrations of PAHs. Some of these parameters had levels that exceeded the limits allowed by legislation via Commission Regulation (EU) No 835/2011. Results revealed BaP levels > 2 µg/kg when plum wood was used in rainbow trout (4.04 µg/kg), carp (4.47 µg/kg) and Siberian sturgeon (8.63 µg/kg). Moreover, the same trend was found for Σ4PAHs, which exceeded 12 µg/kg in rainbow trout (17.57 µg/kg), carp (45.24 µg/kg) and Siberian sturgeon (44.97 µg/kg).
RESUMO
The European Union's (EU) agricultural self-sufficiency is challenged by its reliance on imported plant proteins, particularly soy from the Americas, contributing to deforestation and greenhouse gas emissions. Addressing the EU's protein deficit, this study evaluates alternative protein sources for aquaculture, focusing on their nutritional value, elemental content, and polycyclic aromatic hydrocarbons (PAHs). Protein flours from gastropods (Helix pomatia, Arion lusitanicus, Arion vulgaris) and their hepatopancreas, along with plant-based proteins from food industry by-products (oilcakes, coffee grounds, spent brewer's yeast), were analyzed. Results revealed that snail flour contained the highest protein content at 59.09%, significantly outperforming hepatopancreas flour at 42.26%. Plant-based proteins demonstrated substantial nutritional value, with coffee grounds flour exhibiting a remarkable protein content of 71.8% and spent brewer's yeast flour at 57.9%. Elemental analysis indicated high levels of essential minerals such as magnesium in hepatopancreas flour (5719.10 mg/kg) and calcium in slug flour (48,640.11 mg/kg). However, cadmium levels in hepatopancreas flour (11.45 mg/kg) necessitate caution due to potential health risks. PAH concentrations were low across all samples, with the highest total PAH content observed in hepatopancreas flour at 0.0353 µg/kg, suggesting minimal risk of PAH-related toxicity. The analysis of plant-based protein sources, particularly oilcakes derived from sunflower, hemp, flax, and pumpkin seeds, revealed that these by-products not only exhibit high protein contents but present a promising avenue for enhancing the nutritional quality of feed. This study underscores the potential of utilizing gastropod and plant-based by-products as sustainable and nutritionally adequate alternatives to conventional feeds in aquaculture, contributing to the EU's environmental sustainability goals.
Assuntos
Valor Nutritivo , Animais , Peixes/metabolismo , Ração Animal/análise , Hepatopâncreas/química , Hepatopâncreas/metabolismo , Proteínas de Plantas/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Aquicultura/métodos , Nutrientes/análiseRESUMO
Cereals, as the world's most consumed food, face challenges related to nutrient quality due to climate change and increased production impacting soil health. In this study, we investigated the vitamin and mineral content, polyphenols, and antioxidant activity in cereals from Western Romania, analyzing whole and hulled wheat, rye, oat, and soybeans before and after heat treatment. Samples from 2022 crops were processed into dough and subjected to 220 °C for 30 min. The results reveal that, despite efforts to optimize nutrient content, cereals, particularly after heat processing, exhibited lower vitamin and mineral levels than the recommended daily intake. The decrease in polyphenols and antioxidant capacity was notable, with rye flour experiencing the largest decline (15%). Mineral analysis showed copper levels in decorticated wheat decreased by 82.5%, while iron in rye decreased by 5.63%. Soy flour consistently displayed the highest calcium, magnesium, and potassium levels, whereas oat flour had the highest zinc and copper levels before and after heat processing. The study highlights the concerningly low vitamins and minerals contents in cereals, as well as in the final products reaching consumers in the Western part of Romania, and contributes to the assessment of measures that are meant to improve the contents of these minerals.
RESUMO
With a high number of athletes using sport supplements targeting different results, the need for complex, natural and effective formulations represents an actual reality, while nutrition dosing regimens aiming to sustain the health and performance of athletes are always challenging. In this context, the main goal of this study was to elaborate a novel and complex nutraceutical supplement based on multiple bioactive compounds extracted from Aronia melanocarpa and bee pollen, aiming to support physiological adaptations and to minimize the stress generated by intense physical activity in the case of professional or amateur athletes. Our proposed formulations are based on different combinations of Aronia and bee pollen (A1:P1, A1:P2 and A2:P1), offering personalized supplements designed to fulfill the individual requirements of different categories of athletes. The approximate composition, fatty acid profile, identification and quantification of individual polyphenols, along with the antioxidant capacity of raw biological materials and different formulations, was performed using spectrophotometric methods, GS-MS and HPLC-DAD-MS-ESI+. In terms of antioxidant capacity, our formulations based on different ratios of bee pollen and Aronia were able to act as complex and powerful antioxidant products, highlighted by the synergic or additional effect of the combinations. Overall, the most powerful synergism was obtained for the A1:P2 formulation.
Assuntos
Antioxidantes , Photinia , Animais , Abelhas , Humanos , Antioxidantes/farmacologia , Antioxidantes/análise , Suplementos Nutricionais/análise , Valor Nutritivo , Pólen/químicaRESUMO
After a period of intense development in the synthesis pharmaceutical industry, plants are making a comeback in the public focus as remedies or therapeutic adjuvants and in disease prevention and ensuring the wellbeing and equilibrium of the human body. Plants are being recommended more and more in alimentation, in their natural form, or as extracts, supplements or functional aliments. People, in general, are in search of new sources of nutrients and phytochemicals. As a result, scientific research turns to lesser known and used plants, among them being rowanberries, a species of fruit very rich in nutrients and underused due to their bitter astringent taste and a lack of knowledge regarding the beneficial effects of these fruit. Rowan fruits (rowanberries) are a rich source of vitamins, polysaccharides, organic acids and minerals. They are also a source of natural polyphenols, which are often correlated with the prevention and treatment of modern world diseases. This article presents the existing data regarding the chemical composition, active principles and biopharmaceutical properties of rowan fruits and the different opportunities for their usage.
RESUMO
Raw bars have become popular among health-conscious consumers due to their nutrient-dense ingredients and lack of additives and preservatives. However, the effect of simulated gastrointestinal digestion on the nutrient content of these bars has yet to be extensively studied. In this study, four different raw bar recipes were subjected to simulated gastrointestinal digestion to evaluate the impact on their nutrient content. The recipes have dates and almond flour as base ingredients and specific ingredients such as Maca root powder, Ginger powder, Aronia powder, Pollen, Propolis extract, Astragalus powder, and Cacao powder. These variations were intended to provide diverse flavors and potential health benefits to cater to different preferences and needs. The in vitro digestion model was designed to mimic the conditions of the human gastrointestinal tract, including the mouth, stomach, and small intestine. The results showed that the simulated gastrointestinal digestion significantly impacted the nutrient content of the bars, with varying degrees of nutrient loss observed depending on the recipe. The highest phenolic content and antioxidant activity were observed in the salivary phase for all samples. Vitamin B content generally decreases from the salivary to the intestinal stage. After digestion, the recovery rates of total phenols, antioxidant capacity, and vitamins B1, B3, and B6 varied across the recipes. The recovery rates of vitamins B1, B3, and B6 were generally high across all recipes, indicating their stability and retention during digestion. The findings suggest that simulated GI digestion provides insights into the nutrient bioavailability of raw bars. These results can inform the formulation and optimization of raw bars to enhance nutrient absorption and nutritional value. Further research is warranted to investigate the effects of different processing techniques and ingredient combinations on nutrient bioavailability.
RESUMO
The results presented in this paper on the appropriateness of using of blast furnace slag (BFS) in the composition of roads make an original contribution to the development of sustainable materials with the aim to reduce the carbon footprint and the consumption of natural resources. The novelty of this work consists of determining the optimal percentage of BSF in road concrete, in order to: increase mechanical resistances, reduce contractions in the hardening process, and ensure increased corrosion resistances, even superior to classic cement-based mixtures. Thus, the physical-mechanical characteristics and the microstructure of some road concretes were studied in the laboratory for three different recipes. We kept the same amount of ground granulated blast furnace slag (GGBS) as a substitute for Portland cement, respectively three percentages of 20%, 40%, 60% air-cooled blast furnace slag (ACBFS) and crushed as sand substitute from now on called S54/20, S54/40, S54/60. Drying shrinkage, mechanical resistances, carbonation-induced corrosion, microstructure characterization of hardened concretes, and degree of crystallinity by SEM and XRD measurements were analyzed after a longer curing period of 150/480 days. The obtained results on the three BSF mixtures indicated a reduction of drying shrinkage and implicitly increased the tensile resistance by bending to 150 days well above the level of the blank composition. The degree of crystallinity and the content of the majority phases of the mineralogical compounds, albites, quartz, and tobermorite out of the three BSF samples justifies the increase in the compressive strengths at the age of 480 days in comparison with the test samples. Scanning electron microscope (SEM) and X-ray diffraction measurements showed the highest compactness and lowest portlandite crystal content for the S54/20 slag composite. Future research concerns are the realization of experimental sections in situ, the study of the influence of BFS on the elasticity module of road concrete, and the opportunity to use other green materials that can contribute to the reduction of the carbon footprint, keeping the physical and mechanical properties of road concrete at a high level.
RESUMO
The rapid increase in additive manufacturing applications in all industries has highlighted the lack of innovative technologies and processes in the construction industry. Several European and international policies are in place to guide the development of the technological processes involved in the construction industry toward a sustainable future. Considering the global concerns regarding this industry, the purpose of this study was to develop new cement-based materials that are capable of accelerated hydration and early strength development for use in additive manufacturing. Ca(NO3)2·4H2O, Al2(SO4)3·18H2O and Na2S2O3·5H2O were used to obtain the accelerating effect in the hydration of Portland cement. Based on results obtained from X-ray diffraction (XRD), scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDX) techniques, as well as low-field nuclear magnetic resonance relaxometry (LF-NMR) techniques, it was demonstrated that all accelerators used have a quickening effect on cement hydration. The addition of Na2S2O3·5H2O or combined Na2S2O3·5H2O and Ca(NO3)2·4H2O led to obtaining new cement-based materials with early strength development and fast hydration of microorganized internal structures, critical characteristics for 3D printing.
Assuntos
Fenômenos Químicos , Difração de Raios X , Espectrometria por Raios XRESUMO
This study's objective was to separate cellulose, hemicellulose, and lignin after high-pressure supercritical carbon dioxide pretreatment for further valorization. The study investigated the supercritical carbon dioxide pretreatment of apple orchard waste at temperatures of 160-200 °C, for 15-45 min, at a pressure of 10 MPa. Response Surface Methodology (RSM) was used to optimize the supercritical process and to improve its efficiency. The change of functional groups during different pretreatment conditions was examined by Fourier transform infrared (FTIR) spectroscopy. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) confirmed the structural changes in the biomass structure before and after pretreatment. A new ultra-high performance liquid chromatography (UHPLC) coupled with an evaporative light scattering detector (ELSD) method was developed and validated for the determination of carbohydrates in the liquid fraction that resulted after pretreatment. The estimated uncertainty of the method ranged from 16.9 to 20.8%. The pre-treatment of high-pressure supercritical CO2 appears to be an effective and promising technique for the recovery of sugars and secondary by-products without the use of toxic solvents.
Assuntos
Dióxido de Carbono , Malus , Incerteza , Carboidratos , Lignina , HexosesRESUMO
The new context of the intensive use of lithium-based batteries led to increased production of Li and Li-containing wastes. All these activities are potential sources of environmental pollution with Li. However, the negative impact of Li on ecosystems, its specific role in the plants' development, uptake mechanism, and response to the induced stress are not fully understood. In this sense, the Li uptake and changes induced by Li exposure in the major and trace element contents, photosynthetic pigments, antioxidant activity, and elemental composition of Salvinia natans were also investigated. The results showed that Salvinia natans grown in Li-enriched nutrient solutions accumulated much higher Li contents than those grown in spring waters with a low Li content. However, the Li bioaccumulation factor in Salvinia natans grown in Li-enriched nutrient solutions was lower (13.3-29.5) than in spring waters (13.0-42.2). The plants exposed to high Li contents showed a decrease in their K and photosynthetic pigments content, while their total antioxidant activity did not change substantially.
RESUMO
Brewers' spent grain (BSG), the main by-product of the brewing industry, is a rich source of minerals and water-soluble vitamins such as thiamine, pyridoxine, niacin, and cobalamin. Bioaccessibility through in vitro digestion is an important step toward the complete absorption of minerals and B group vitamins in the gastrointestinal system. Inductively coupled plasma optical emission spectrometry (ICP-OES) together with inductively coupled plasma quadrupole mass spectrometry (ICP-MS) was used for the quantification of the macro- and micro-minerals. An ultra-high performance liquid chromatography (UHPLC) system coupled with a diode array detector (DAD) was used for B group vitamin identification. Four different industrial BSG samples were used in the present study, with different percentages of malted cereals such as barley, wheat, and degermed corn. Calcium's bioaccessibility was higher in the BSG4 sample composed of 50% malted barley and 50% malted wheat (16.03%), while iron presented the highest bioaccessibility value in the BSG2 sample (30.03%) composed of 65% Pale Ale malt and 35% Vienna malt. On the other hand, vitamin B1 had the highest bioaccessibility value (72.45%) in the BSG3 sample, whilst B6 registered the lowest bioaccessibility value (16.47%) in the BSG2 sample. Therefore, measuring the bioaccessibilty of bioactive BSG compounds before their further use is crucial in assessing their bioavailability.
Assuntos
Hordeum , Complexo Vitamínico B , Antioxidantes/análise , Grão Comestível/química , Hordeum/química , Minerais/análise , Triticum , Complexo Vitamínico B/análiseRESUMO
The ability of natural zeolite amendment to reduce the uptake of potentially toxic elements (PTEs) by lettuce, spinach and parsley was evaluated using pot experiments. PTE concentrations in roots and shoots, as well as the pseudo total (PT), water soluble (WS) and bioavailable (BA) PTE fractions in the amended soils, were assessed. Although the PT PTE concentration was high, the WS fraction was very low (<0.4%), while the BA fraction varied widely (<5% for Cr, Mn and Co, <15% for Ni, Pb and Zn, >20% for Cd and Cu). PTE concentration decreased in both roots and shoots of all leafy vegetables grown on zeolite amended soils, especially at high amendment dose (10%). The uptake of PTEs mainly depended on plant species, PTE type and amendment dose. With the exception of Zn in spinach, the bioaccumulation factor for roots was higher than for shoots. Generally, lettuce displayed the highest PTE bioaccumulation capacity, followed by spinach and parsley. Except for Zn in spinach, the transfer factors were below 1 for all PTEs, all plant species and all amendment doses. Our results showed that the natural zeolites are promising candidates in the reclamation of contaminated soils due to their ability to immobilize PTEs.
RESUMO
The content and composition of dietary supplements is of great interest due to their increasing consumption and variety of available brand offered in the market. Accurate determination of vitamins is important for the improvement of dietary supplement quality and nutrition assessments. In this regard, the simultaneous determination of vitamin D3 (calcitriol-CT and cholecalciferol-CHL) and K2 (menaquinone-4-MK-4 and menaquinone-7-MK-7) in dietary supplements was developed by using ultra-high-pressure liquid chromatography (UHPLC). The overall runtime per sample was above 35 min, with the retention times of 2.40, 6.59, 7.06, and 32.6 min for vitamin D3 (CT and CHL) and vitamin K2 (MK-4 and MK-7), respectively. The limits of detection and limits of quantification for the target nutritional compounds ranged between 0.04-0.05 µg/mL, respectively. The validation results indicated that the method had reasonable linearity (R2 ≥ 0.9990), good recovery (>82%), satisfactory intra-day precision (≤1.9%) and inter-day precision (≤3.5%), and high selectivity and specificity. The validated UHPLC method was demonstrated to be precise, accurate, and robust for the simultaneous determination of vitamins D3 (CT and CHL) and K2 (MK-4 and MK-7) in dietary supplements.
Assuntos
Calcitriol/análise , Colecalciferol/análise , Suplementos Nutricionais/análise , Vitamina K 2/análogos & derivados , Cromatografia Líquida de Alta Pressão , Vitamina K 2/análiseRESUMO
Unlike odorants that mask odors, natural zeolite acts as a molecular sieve that captures and eliminates odors. Different treatment methods can be applied to influence the properties of the natural zeolites. To enhance the odor adsorption capacities of the natural zeolite two types of treatment methods were applied: chemical (acid, basic) and thermal. The initial natural zeolites and the activated one were characterized using X-ray diffraction (XRD) and scanning electron microscope (SEM-EDX). Two experiments were performed to establish the odor adsorption capacity of the activated natural zeolites. The best zeolite for the adsorption of humidity, ammonia and hydrogen sulfide was the 1-3 mm zeolite activated through thermal treatment. For the adsorption of PAHs, the best zeolite was the one activated through basic treatment, with an adsorption capacity of 89.6 ng/g.
RESUMO
Circular economy principles are based on the use of by-products from one operation as the raw materials in another. The aim of this work is to obtain extracts with high antioxidant capacity and resveratrol content for the superior capitalization of the biomass of Feteasca regala leaves obtained during vineyard horticultural operations in spring. In order to obtain a high-quality extract at an industrial level, an optimal extraction process is needed. Central composite design (CCD) was used for the experiment design, which contained three independent variables: the ratio of extraction solvent to solid matter, temperature (°C) and time (minutes). The evaluation of extracts was done by measuring the total antioxidant capacity of the extracts using photo-chemiluminescent techniques, and the resveratrol content using liquid chromatography. Process optimization was done using response surface methodology (RSM). Minitab software version 17.0 was used for the design of experiments and data analysis. Regression analysis showed that the model predicts 87.5% of the variation for resveratrol and 96% for total antioxidant capacity (TAC). The temperature had the biggest influence on the extraction yield. The optimal operational conditions for the extraction method applied had the following conditions: ratio e/m 2.92; 43.23 °C and 55.4 min. A maximum value of 34,623 µg ascorbic acid equivalent (AAE) /mL total antioxidant capacity and 182.4 µg/mL resveratrol content were obtained when the optimal extraction parameters where used. The values obtained in experiments proved that by using RSM an accurate model can be obtained for extraction of Feteasca regala leaves.
Assuntos
Antioxidantes/análise , Extratos Vegetais/análise , Folhas de Planta/química , Vitis/química , Antioxidantes/química , Ácido Ascórbico/química , Cromatografia Líquida , Cosméticos , Luminescência , Fotoquímica/métodos , Análise de Regressão , Resveratrol/análise , Solventes , TemperaturaRESUMO
In this paper, the production of a second-generation bioethanol from lignocellulosic vineyard cutting wastes was investigated in order to define the optimal operating conditions of the autohydrolysis pretreatment, chlorite delignification and simultaneous saccharification and fermentation (SSF). The autohydrolysis of vine-shoot wastes resulted in liquors containing mainly a mixture of monosaccharides, degradation products and spent solids (rich in cellulose and lignin), with potential utility in obtaining valuable chemicals and bioethanol. The autohydrolysis of the vine-shoot wastes was carried out at 165 and 180 °C for 10 min residence time, and the resulted solid and liquid phases composition were analysed. The resulted liquid fraction contained hemicellulosic sugars as a mixture of alpha (α) and beta (ß) sugar anomers, and secondary by-products. The solid fraction was delignified using the sodium chlorite method for the separation of lignin and easier access of enzymes to the cellulosic sugars, and then, converted to ethanol by the SSF process. The maximum bioethanol production (6%) was obtained by autohydrolysis (165 °C), chlorite delignification and SSF process at 37 °C, 10% solid loading, 72 h. The principal component analysis was used to identify the main parameters that influence the chemical compositions of vine-shoot waste for different varieties.