Large area arrays of discrete single-molecule junctions derived from host-guest complexes.

The desire to continually reduce the lower limits of semiconductor integrated circuit (IC) fabrication methods continues to inspire interest in unimolecular electronics as a platform technology for the realization of future (opto)electronic devices. However, despite successes in developing methods for the construction and measurement of single-molecule and large-area molecular junctions, exercising control over the precise junction geometry remains a significant challenge. Here, host-guest complexes of the wire-like viologen derivative 1,1'-bis(4-(methylthio)-phenyl)-[4,4'-bipyridine]-1,1'-diium chloride ([1][Cl]2) and cucurbit[7]uril (CB[7]) have been self-assembled in a regular pattern over a gold substrate. Subsequently, ligandless gold nanoparticles (AuNPs) synthesized in situ are deposited over the host-guest array. The agreement between the conductance of individual mono-molecular junctions, appropriately chosen as a function of the AuNP diameter, within this array determined by conductive probe atomic force microscope (c-AFM) and true single-molecule measurements for a closely similar host-guest complex within a scanning tunneling microscope break-junction (STM-BJ) indicates the formation of molecular junctions derived from these host-guest complexes without deleterious intermolecular coupling effects.

Single-Molecule Conductance Behavior of Molecular Bundles.

Controlling the orientation of complex molecules in molecular junctions is crucial to their development into functional devices. To date, this has been achieved through the use of multipodal compounds (i.e., containing more than two anchoring groups), resulting in the formation of tri/tetrapodal compounds. While such compounds have greatly improved orientation control, this comes at the cost of lower surface coverage. In this study, we examine an alternative approach for generating multimodal compounds by binding multiple independent molecular wires together through metal coordination to form a molecular bundle. This was achieved by coordinating iron(II) and cobalt(II) to 5,5'-bis(methylthio)-2,2'-bipyridine (L1) and (methylenebis(4,1-phenylene))bis(1-(5-(methylthio)pyridin-2-yl)methanimine) (L2) to give two monometallic complexes, Fe-1 and Co-1, and two bimetallic helicates, Fe-2 and Co-2. Using XPS, all of the complexes were shown to bind to a gold surface in a fac fashion through three thiomethyl groups. Using single-molecule conductance and DFT calculations, each of the ligands was shown to conduct as an independent wire with no impact from the rest of the complex. These results suggest that this is a useful approach for controlling the geometry of junction formation without altering the conductance behavior of the individual molecular wires.

Single-Molecule Junction Formation in Deep Eutectic Solvents with Highly Effective Gate Coupling.

The environment surrounding a molecular junction affects its charge-transport properties and, therefore, must be chosen with care. In the case of measurements in liquid media, the solvent must provide good solvation, grant junction stability, and, in the case of electrolyte gating experiments, allow efficient electrical coupling to the gate electrodes through control of the electrical double layer. We evaluated in this study the deep eutectic solvent mixture (DES) ethaline, which is a mixture of choline chloride and ethylene glycol (1:2), for single-molecule junction fabrication with break-junction techniques. In ethaline, we were able to (i) measure challenging and poorly soluble molecular wires, exploiting the improved solvation capabilities offered by DESs, and (ii) efficiently apply an electrostatic gate able to modulate the conductance of the junction by approximately an order of magnitude within a ∼1 V potential window. The electrochemical gating results on a Au-VDP-Au junction follow exceptionally well the single-level modeling with strong gate coupling (where VDP is 1,2-di(pyridine-4-yl)ethene). Ethaline is also an ideal solvent for the measurement of very short molecular junctions, as it grants a greatly reduced snapback distance of the metallic electrodes upon point-contact rupture. Our work demonstrates that DESs are viable alternatives to often relatively expensive ionic liquids, offering good versatility for single-molecule electrical measurements.

Tuning Emission Lifetimes of Ir(C

Emissive compounds with long emission lifetimes (µs to ms) in the visible region are of interest for a range of applications, from oxygen sensing to cellular imaging. The emission behavior of Ir(ppy)2(acac) complexes (where ppy is the 2-phenylpyridyl chelate and acac is the acetylacetonate chelate) with an oligo(para-phenyleneethynylene) (OPE3) motif containing three para-rings and two ethynyl bridges attached to acac or ppy is examined here due to the accessibility of the long-lived OPE3 triplet states. Nine Ir(ppy)2(acac) complexes with OPE3 units are synthesized where the OPE3 motif is at the acac moiety (aOPE3), incorporated in the ppy chelate (pOPE3) or attached to ppy via a durylene link (dOPE3). The aOPE3 and dOPE3 complexes contain OPE3 units that are decoupled from the Ir(ppy)2(acac) core by adopting perpendicular ring-ring orientations, whereas the pOPE3 complexes have OPE3 integrated into the ppy ligand to maximize electronic coupling with the Ir(ppy)2(acac) core. While the conjugated pOPE3 complexes show emission lifetimes of 0.69-32.8 µs similar to the lifetimes of 1.00-23.1 µs for the non-OPE3 Ir(ppy)2(acac) complexes synthesized here, the decoupled aOPE3 and dOPE3 complexes reveal long emission lifetimes of 50-625 µs. The long lifetimes found in aOPE3 and dOPE3 complexes are due to intramolecular reversible electronic energy transfer (REET) where the long-lived triplet-state metal to ligand charge transfer (3MLCT) states exchange via REET with the even longer-lived triplet-state localized OPE3 states. The proposed REET process is supported by changes observed in excitation wavelength-dependent and time-dependent emission spectra from aOPE3 and dOPE3 complexes, whereas emission spectra from pOPE3 complexes remain independent of the excitation wavelength and time due to the well-established 3MLCT states of many Ir(ppy)2(acac) complexes. The long lifetimes, visible emission maxima (524-526 nm), and photoluminescent quantum yields of 0.44-0.60 for the dOPE3 complexes indicate the possibility of utilizing such compounds in oxygen-sensing and cellular imaging applications.

Connectivity-Dependent Conductance of 2,2'-Bipyridine-Based Metal Complexes.

The present work provides an insight into the effect of connectivity isomerization of metal-2,2'-bipyridine complexes. For that purpose, two new 2,2'-bipyridine (bpy) ligand systems, 4,4'-bis(4-(methylthio)phenyl)-2,2'-bipyridine (Lmeta) and 5,5'-bis(3,3-dimethyl-2,3-dihydrobenzothiophen-5-yl)-2,2'-bipyridine (Lpara) were synthesized and coordinated to rhenium and manganese to obtain the corresponding complexes MnLmeta(CO)3Br, ReLmeta(CO)3Br, MnLpara(CO)3Br, MoLpara(CO)4 and ReLpara(CO)3Br. The experimental and theoretical results revealed that coordination to the para system, i.e., the metal ion peripheral to the conductance path, gave a slightly increased conductance compared to the free ligand attributed to the reduced highest occupied molecular orbital (HOMO)-least unoccupied molecular orbital (LUMO) gap. The meta-based system formed a destructive quantum interference feature that reduced the conductance of a S···S contacted junction to below 10-5.5Go, reinforcing the importance of contact group connectivity for molecular wire conductance.

Divergent Approach for Tris-Heteroleptic Cyclometalated Iridium Complexes Using Triisopropylsilylethynyl-Substituted Synthons.

Bis-heteroleptic cyclometalated iridium complexes of the form Ir(La)2(acac), where La is a substituted 2-phenylpyridine derivative and acac is an acetylacetonato ligand, are a useful class of luminescent organometallic complexes for a range of applications. Related tris-heteroleptic complexes of the form Ir(La)(Lb)(acac) offer the potential advantage of greater functionality through the use of two different cyclometalated ligands but are, in general, more difficult to obtain. We report the synthesis of divergent bis- and tris-heteroleptic triisopropylsilylethynyl-substituted intermediate complexes that can be diversified using a "chemistry-on-the-complex" approach. We demonstrate the methodology through one-pot deprotection and Sonogashira cross-coupling of the intermediate complexes with para-R-aryliodides (R = H, SMe, and CN). The photophysical and electrochemical behaviors of the resultant bis- and tris-heteroleptic complexes are compared, and it is shown that the tris-heteroleptic complexes exhibit subtly different emission and redox properties to the bis-heteroleptic complexes, such as further red-shifted emission maxima and lower extinction coefficients, which can be attributed to the reduced symmetry. It is demonstrated, supported by DFT and time-dependent DFT calculations, that the charge-transfer character of the emission can be altered via variation of the terminal substituent; the introduction of an electron-withdrawing cyano group in the terminal position leads to a significant red shift, while the introduction of an SMe group can substantially increase the emission quantum yield. Most notably, this convenient synthetic approach reduces the need to perform the often challenging isolation of tris-heteroleptic complexes to a single divergent intermediate, which will simplify access to families of complexes of the form Ir(La)(Lb)(acac).

Selective Anchoring Groups for Molecular Electronic Junctions with ITO Electrodes.

Indium tin oxide (ITO) is an attractive substrate for single-molecule electronics since it is transparent while maintaining electrical conductivity. Although it has been used before as a contacting electrode in single-molecule electrical studies, these studies have been limited to the use of carboxylic acid terminal groups for binding molecular wires to the ITO substrates. There is thus the need to investigate other anchoring groups with potential for binding effectively to ITO. With this aim, we have investigated the single-molecule conductance of a series of eight tolane or "tolane-like" molecular wires with a variety of surface binding groups. We first used gold-molecule-gold junctions to identify promising targets for ITO selectivity. We then assessed the propensity and selectivity of carboxylic acid, cyanoacrylic acid, and pyridinium-squarate to bind to ITO and promote the formation of molecular heterojunctions. We found that pyridinium squarate zwitterions display excellent selectivity for binding to ITO over gold surfaces, with contact resistivity comparable to that of carboxylic acids. These single-molecule experiments are complemented by surface chemical characterization with X-ray photoelectron spectroscopy, quartz crystal microbalance, contact angle determination, and nanolithography using an atomic force miscroscope. Finally, we report the first density-functional theory calculations involving ITO electrodes to model charge transport through ITO-molecule-gold heterojunctions.

Exposure of hospital healthcare workers to the novel coronavirus (SARS-CoV-2).

Healthcare workers (HCWs) are at higher risk of infection with the coronavirus disease 2019 (COVID-19) and can also amplify outbreaks within healthcare facilities if they become ill. Certain groups are known to be at higher risk of contracting severe COVID-19 infection, such as men and people from Black, Asian and minority ethnic (BAME) backgrounds. Identifying and managing HCWs who have been exposed to COVID-19 is of utmost importance in preventing healthcare transmission and protecting staff and vulnerable patients in healthcare settings. Recently, antibody testing to diagnose previous COVID-19 exposure among HCW has commenced in the UK. This provided an opportunity to assess exposure to COVID-19 among the various subgroups within the HCW community, based on their roles and ethnic background. We found that HCWs working in patient-facing roles were twice as likely to have been exposed to COVID-19 than their colleagues in non-patient-facing roles. Reassuringly, workers from BAME backgrounds had a similar risk of previous COVID-19 exposure to their white colleagues. More research is required to assess how frontline staff, especially those working in patient facing roles, can reduce their risk of exposure to COVID-19.

Rapid time-resolved Circular Polarization Luminescence (CPL) emission spectroscopy.

Circular polarisation luminescence (CPL) emission spectroscopy is a powerful tool for probing the fundamental chiroptical features of optically emissive chiral molecular systems. However, uptake of CPL spectroscopy has been impeded by the limitations of conventional scanning monochromator (SM) CPL spectrometers, which are costly to acquire and maintain, and typically require tens of minutes to acquire a typical CPL spectrum. Here, we demonstrate a design of CPL spectrometer which uses rapid readout solid state (SS) spectrometer detectors and a dual channel optical layout to acquire CPL spectra in as little as 10 milliseconds. We validate and demonstrate equivalent CPL measurement by measuring CPL spectra of two reference europium(III) complexes. Further, we demonstrate time-gated CPL acquisition, enabling long-lived CPL luminescence to be distinguished from short-lived emission of other fluorescent species. We anticipate that SS-CPL spectrometers will enable flexible, rapid, and relatively low-cost CPL spectroscopy for diverse applications.

Wide-field time-correlated single photon counting-based fluorescence lifetime imaging microscopy.

Wide-field time-correlated single photon counting detection techniques, where the position and the arrival time of the photons are recorded simultaneously using a camera, have made some advances recently. The technology and instrumentation used for this approach is employed in areas such as nuclear science, mass spectroscopy and positron emission tomography, but here, we discuss some of the wide-field TCSPC methods, for applications in fluorescence microscopy. We describe work by us and others as presented in the Ulitima fast imaging and tracking conference at the Argonne National Laboratory in September 2018, from phosphorescence lifetime imaging (PLIM) microscopy on the microsecond time scale to fluorescence lifetime imaging (FLIM) on the nanosecond time scale, and highlight some applications of these techniques.

Enolization rates control mono- versus di-fluorination of 1,3-dicarbonyl derivatives.

Fluorine-containing 1,3-dicarbonyl derivatives are essential building blocks for drug discovery and manufacture. To understand the factors that determine selectivity between mono- and di-fluorination of 1,3-dicarbonyl systems, we have performed kinetic studies of keto-enol tautomerism and fluorination processes. Photoketonization of 1,3-diaryl-1,3-dicarbonyl derivatives and their 2-fluoro analogues is coupled with relaxation kinetics to determine enolization rates. Reaction additives such as water accelerate enolization processes, especially of 2-fluoro-1,3-dicarbonyl systems. Kinetic studies of enol fluorination with Selectfluor™ and NFSI reveal the quantitative effects of 2-fluorination upon enol nucleophilicity towards reagents of markedly different electrophilicity. Our findings have important implications for the synthesis of α,α-difluoroketonic compounds, providing valuable quantitative information to aid in the design of fluorination and difluorination reactions.

Highly Linearized Twisted Iridium(III) Complexes.

Improving the spatial alignment of emitting molecules has long been a goal of organic-light-emitting-diode development to improve device efficiencies and to generate polarized emission. Herein we describe a simple approach employing Sonogashira coupling with alkyne iridium(phenylpyridine)2(acetylacetone) synthons (2-5) to generate eight linear iridium complexes (6-13) with crystallographically determined lengths of up to 5 nm. By embedding these "long" complexes into a polymer matrix and stretching it, an improvement of the polarization ratio of unstretched and stretched films of up to 7.1 times was achieved. Additionally, through the inclusion of "twists" in the complexes, the electronic coupling between the iridium center and substituent was controlled, giving a system where the emission behavior is independent of the length.

Sky-blue emitting bridged diiridium complexes: beneficial effects of intramolecular π-π stacking.

The potential of intramolecular π-π interactions to influence the photophysical properties of diiridium complexes is an unexplored topic, and provides the motivation for the present study. A series of diarylhydrazide-bridged diiridium complexes functionalised with phenylpyridine (ppy)-based cyclometalating ligands is reported. It is shown by NMR studies in solution and single crystal X-ray analysis that intramolecular π-π interactions between the bridging and cyclometalating ligands rigidify the complexes leading to high luminescence quantum efficiencies in solution and in doped films. Fluorine substituents on the phenyl rings of the bridge promote the intramolecular π-π interactions. Notably, these non-covalent interactions are harnessed in the rational design and synthesis of the first examples of highly emissive sky-blue diiridium complexes featuring conjugated bridging ligands, for which they play a vital role in the structural and photophysical properties. Experimental results are supported by computational studies.

Assembly of High-Potency Photosensitizer-Antibody Conjugates through Application of Dendron Multiplier Technology.

Exploitation of photosensitizers as payloads for antibody-based anticancer therapeutics offers a novel alternative to the small pool of commonly utilized cytotoxins. However, existing bioconjugation methodologies are incompatible with the requirement of increased antibody loading without compromising antibody function, stability, or homogeneity. Herein, we describe the first application of dendritic multiplier groups to allow the loading of more than 4 porphyrins to a full IgG antibody in a site-specific and highly homogeneous manner. Photophysical evaluation of UV-visible absorbance and singlet oxygen quantum yields highlighted porphyrin-dendron 14 as the best candidate for bioconjugation; with subsequent bioconjugation producing a HER2-targeted therapeutic with average loading ratios of 15.4:1. In vitro evaluation of conjugate 18 demonstrated a nanomolar photocytotoxic effect in a target cell line, which overexpresses HER2, with no observed photocytotoxicity at the same concentration in a control cell line which expresses native HER2 levels, or in the absence of irradiation with visible light.

Conductance of 'bare-bones' tripodal molecular wires.

Controlling the orientation of molecular conductors on the electrode surfaces is a critical factor in the development of single-molecule conductors. In the current study, we used the scanning tunnelling microscopy-based break junction (STM-BJ) technique to explore 'bare-bones' tripodal molecular wires, employing different anchor groups (AGs) at the 'top' and 'bottom' of the tripod. The triarylphosphine tris(4-(methylthio)phenyl)phosphine and its corresponding phosphine sulfide showed only a single high conductance feature in the resulting 1- and 2-dimensional conductance histograms, whereas analogous molecules with fewer than three thiomethyl AGs did not show clear conductance features. Thus, by systematic molecular modifications and with the aid of supporting DFT calculations, the binding geometry, with respect to the surface, was elucidated.

Understanding Ultrafast Dynamics of Conformation Specific Photo-Excitation: A Femtosecond Transient Absorption and Ultrafast Raman Loss Study.

Excited state ultrafast conformational reorganization is recognized as an important phenomenon that facilitates light-induced functions of many molecular systems. This report describes the femtosecond and picosecond conformational relaxation dynamics of middle-ring and terminal ring twisted conformers of the acetylene π-conjugated system bis(phenylethynyl)benzene, a model system for molecular wires. Through excitation wavelength dependent, femtosecond-transient absorption measurements, we found that the middle-ring and terminal ring twisted conformers relax at femtosecond (400-600 fs) and picosecond (20-24 ps) time scales, respectively. Actinic pumping into the red flank of the absorption spectrum leads to excitation of primarily planar conformers, and results in very different excited state dynamics. In addition, ultrafast Raman loss spectroscopic studies revealed the vibrational mode dependent relaxation dynamics for different excitation wavelengths. To corroborate our experimental findings, DFT and time-dependent DFT calculations were carried out. The Franck-Condon simulation indicated that the vibronic structure observed in the electronic absorption and the fluorescence spectra are due to progressions and combinations of several vibrational modes corresponding to the phenyl ring and the acetylenic groups. Furthermore, the middle ring torsional rotation matches the room-temperature electronic absorption, in stark contrast to the terminal ring torsional rotation. Finally, we show that the middle-ring twisted conformer undergoes femtosecond torsional planarization dynamic, whereas the terminal rings relax on a few tens of picosecond time scale.

Mode specific excited state dynamics study of bis(phenylethynyl)benzene from ultrafast Raman loss spectroscopy.

Femtosecond transient absorption (fs-TA) and Ultrafast Raman Loss Spectroscopy (URLS) have been applied to reveal the excited state dynamics of bis(phenylethynyl)benzene (BPEB), a model system for one-dimensional molecular wires that have numerous applications in opto-electronics. It is known from the literature that in the ground state BPEB has a low torsional barrier, resulting in a mixed population of rotamers in solution at room temperature. For the excited state this torsional barrier had been calculated to be much higher. Our femtosecond TA measurements show a multi-exponential behaviour, related to the complex structural dynamics in the excited electronic state. Time-resolved, excited state URLS studies in different solvents reveal mode-dependent kinetics and picosecond vibrational relaxation dynamics of high frequency vibrations. After excitation, a gradual increase in intensity is observed for all Raman bands, which reflects the structural reorganization of Franck-Condon excited, non-planar rotamers to a planar conformation. It is argued that this excited state planarization is also responsible for its high fluorescence quantum yield. The time dependent peak positions of high frequency vibrations provide additional information: a rapid, sub-picosecond decrease in peak frequency, followed by a slower increase, indicates the extent of conjugation during different phases of excited state relaxation. The CC triple (-C≡C-) bond responds somewhat faster to structural reorganization than the CC double (>C=C<) bonds. This study deepens our understanding of the excited state of BPEB and analogous linear pi-conjugated systems and may thus contribute to the advancement of polymeric "molecular wires."

Anisotropic lanthanide-based nano-clusters for imaging applications.

We have developed a new class of lanthanide nano-clusters that self-assemble using flexible Schiff base ligands. Cd-Ln and Ni-Ln clusters, [Ln8Cd24(L1)12(OAc)39Cl7(OH)2] (Ln = Nd, Eu), [Eu8Cd24(L1)12(OAc)44], [Ln8Cd24(L2)12(OAc)44] (Ln = Nd, Yb, Sm) and [Nd2Ni4(L3)2(acac)6(NO3)2(OH)2], were constructed using different types of flexible Schiff base ligands. These molecular nano-clusters exhibit anisotropic architectures that differ considerably depending upon the presence of Cd (nano-drum) or Ni (square-like nano-cluster). Structural characterization of the self-assembled particles has been undertaken using crystallography, transmission electron microscopy and small-angle X-ray scattering. Comparison of the metric dimensions of the nano-drums shows a consistency of size using these techniques, suggesting that these molecules may share similar structural features in both solid and solution states. Photophysical properties were studied by excitation of the ligand-centered absorption bands in the solid state and in solution, and using confocal microscopy of microspheres loaded with the compounds. The emissive properties of these compounds vary depending upon the combination of lanthanide and Cd or Ni present in these clusters. The results provide new insights into the construction of novel high-nuclearity nano-clusters and offer a promising foundation for the development of new functional nanomaterials.

The use of organolithium reagents for the synthesis of 4-aryl-2-phenylpyridines and their corresponding iridium(iii) complexes.

A versatile palladium-free route for the synthesis of 4-aryl-substituted phenylpyridines (ppy), starting from tert-butyl 4-oxopiperidine-1-carboxylate, is reported. Reaction with an aryllithium, followed by trifluoroacetic acid dehydration/deprotection and oxidation with 2-iodoylbenzoic acid and finally phenylation, gave 4 ligands (L(1-4)H): 2,4-diphenylpyridine, 4-(4-methoxyphenyl)-2-phenylpyridine, 2-phenyl-4-(o-tolyl)pyridine and 4-mesityl-2-phenylpyridine. These ligands were coordinated to iridium to give the corresponding Ir(L)2(A) complexes (Ir1-7), where A = ancillary ligand acetylacetate or 2-picolinate. This was used to demonstrate that, through a combination of ancillary ligand choice and torsional twisting between the 4-aryl substituents of the ppy ligands, it is possible to tune the phosphorescent emission of the complexes in the range 502-560 nm.

Single-Molecule Conductance of Viologen-Cucurbit[8]uril Host-Guest Complexes.

The local molecular environment is a critical factor which should be taken into account when measuring single-molecule electrical properties in condensed media or in the design of future molecular electronic or single molecule sensing devices. Supramolecular interactions can be used to control the local environment in molecular assemblies and have been used to create microenvironments, for instance, for chemical reactions. Here, we use supramolecular interactions to create microenvironments which influence the electrical conductance of single molecule wires. Cucurbit[8]uril (CB[8]) with a large hydrophobic cavity was used to host the viologen (bipyridinium) molecular wires forming a 1:1 supramolecular complex. Significant increases in the viologen wire single molecule conductances are observed when it is threaded into CB[8] due to large changes of the molecular microenvironment. The results were interpreted within the framework of a Marcus-type model for electron transfer as arising from a reduction in outer-sphere reorganization energy when the viologen is confined within the hydrophobic CB[8] cavity.