A laser parameter study on enhancing proton generation from microtube foil targets.

The interaction of an intense laser with a solid foil target can drive [Formula: see text] TV/m electric fields, accelerating ions to MeV energies. In this study, we experimentally observe that structured targets can dramatically enhance proton acceleration in the target normal sheath acceleration regime. At the Texas Petawatt Laser facility, we compared proton acceleration from a [Formula: see text] flat Ag foil, to a fixed microtube structure 3D printed on the front side of the same foil type. A pulse length (140-450 fs) and intensity ((4-10) [Formula: see text] W/cm[Formula: see text]) study found an optimum laser configuration (140 fs, 4 [Formula: see text] W/cm[Formula: see text]), in which microtube targets increase the proton cutoff energy by 50% and the yield of highly energetic protons ([Formula: see text] MeV) by a factor of 8[Formula: see text]. When the laser intensity reaches [Formula: see text] W/cm[Formula: see text], the prepulse shutters the microtubes with an overcritical plasma, damping their performance. 2D particle-in-cell simulations are performed, with and without the preplasma profile imported, to better understand the coupling of laser energy to the microtube targets. The simulations are in qualitative agreement with the experimental results, and show that the prepulse is necessary to account for when the laser intensity is sufficiently high.

Plasma mirror focal spot quality for glass and aluminum mirrors for laser pulses up to 20 ps.

High-intensity short-pulse lasers are being pushed further as applications continue to demand higher laser intensities. Uses such as radiography and laser-driven particle acceleration require these higher intensities to produce the necessary x-ray and particle fluxes. Achieving these intensities, however, is limited by the damage threshold of costly optics and the complexity of target chambers. This is evidenced by the Advanced Radiographic Capability (ARC) short-pulse laser at the National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory, producing four high-energy $ \approx 1\;{\rm kJ} $≈1kJ laser pulses at 30 ps pulse duration, being limited to an intensity of $ {10^{18}}\;{\rm W}/{{\rm cm}^2} $1018W/cm2 by the large focal spot size of $ \approx 100\;{\unicode{x00B5}{\rm m}} $≈100µm. Due to the setup complexity of NIF, changing the location of the final focusing parabola in order to improve the focal spot size is not an option. This leads to the possible use of disposable ellipsoidal plasma mirrors (PMs) placed within the chamber, close to the target in an attempt to refocus the four ARC beams. However, the behavior of PMs at these relatively long pulse durations (tens of picoseconds) is not well characterized. The results from the COMET laser at the Jupiter Laser Facility carried out at 0.5 to 20 ps pulse durations on flat mirrors are presented as a necessary first step towards focusing curved mirrors. The findings show defocusing at longer pulse durations and higher intensities, with less degradation when using aluminum coated mirrors.

Heat-release equation of state and thermal conductivity of warm dense carbon by proton differential heating.

Warm dense carbon is generated at 0.3-2.0 g/cc and 1-7 eV by proton heating. The release equation of state (EOS) after heating and thermal conductivity of warm dense carbon are studied experimentally in this regime using a Au/C dual-layer target to initiate a temperature gradient and two picosecond time-resolved diagnostics to probe the surface expansion and heat flow. Comparison between the data and simulations using various EOSs and thermal conductivity models is quantified with a statistical χ^{2} analysis. Out of seven EOS tables and five thermal conductivity models, only L9061 with the Lee-More model provides a probability above 50% to match all data.

Ionization injection of highly-charged copper ions for laser driven acceleration from ultra-thin foils.

Laser-driven ion acceleration is often analyzed assuming that ionization reaches a steady state early in the interaction of the laser pulse with the target. This assumption breaks down for materials of high atomic number for which the ionization occurs concurrently with the acceleration process. Using particle-in-cell simulations, we have examined acceleration and simultaneous field ionization of copper ions in ultra-thin targets (20-150 nm thick) irradiated by a laser pulse with intensity 1 × 1021 W/cm2. At this intensity, the laser pulse drives strong electric fields at the rear side of the target that can ionize Cu to charge states with valence L-shell or full K-shell. The highly-charged ions are produced only in a very localized region due to a significant gap between the M- and L-shells' ionization potentials and can be accelerated by strong, forward-directed sections of the field. Such an "ionization injection" leads to well-pronounced bunches of energetic, highly-charged ions. We also find that for the thinnest target (20 nm) a push by the laser further increases the ion energy gain. Thus, the field ionization, concurrent with the acceleration, offers a promising mechanism for the production of energetic, high-charge ion bunches.

Characterization of the preformed plasma for high-intensity laser-plasma interaction.

The interaction of a very intense, very short laser pulse is modified by the presence of a preformed plasma prior to the main short pulse. The preformed plasma is created by a small prepulse interacting with the target prior to the main pulse. The prepulse has been monitored using a water-cell-protected fast photodiode allowing on every shot a high dynamic measurement of the pulse profile. Simultaneously we have used time-resolved interferometry to look at the preformed plasma on a 300 TW, 700 fs laser. The two-dimensional density maps obtained have been compared with two-dimensional hydrodynamic simulations.

Density measurement of shock compressed foam using two-dimensional x-ray radiography.

We have used spherically bent quartz crystal to image a laser-generated shock in a foam medium. The foam targets had a density of 0.16 g/cm(3) and thickness of 150 microm, an aluminum/copper pusher drove the shock. The experiment was performed at the Titan facility at Lawrence Livermore National Laboratory using a 2 ns, 250 J laser pulse to compress the foam target, and a short pulse (10 ps, 350 J) to generate a bright Ti K alpha x-ray source at 4.5 keV to radiograph the shocked target. The crystal used gives a high resolution (approximately 20 microm) monochromatic image of the shock compressed foam.