RESUMO
This paper discusses different components of a high-power test setup for replicating multipactor in a laboratory environment. We developed a broadband test cell for parallel-plate multipactor discharges that can operate from DC to 1.2 GHz. The proposed test cell design features a multi-step transition from a coaxial line to a microstripline with negligible insertion loss suitable for high-power breakdown experiments. The multipactor section is adjustable and replaceable, offering flexibility in conducting various multipactor tests, such as different gap distances and local surface treatments. We incorporated two local multipactor detection methods, an electron multiplier tube and a biased standalone probe to rapidly and reliably detect the growth of secondary electrons in the multipactor vicinity. The driving circuits of these detection methods have been designed to filter out RF coupling while preserving the detection signal due to multipactor current. To demonstrate the accuracy of the proposed test setup, we validated the multipactor thresholds determined in simulation using the 3D particle-in-cell module of CST Microwave Studio. We obtained very good agreement between simulation and experimental results over the broadband frequency range. The topics discussed in this paper further inform how to address the design obstacles encountered in developing a bench-top multipactor test setup.
RESUMO
Over the last 30 years, there have been dramatic changes in phased array coil technology leading to increasing channel density and parallel imaging functionality. Current receiver array coils are rigid and often mismatched to patient's size. Recently there has been a move towards flexible coil technology, which is more conformal to the human anatomy. Despite the advances of so-called flexible surface coil arrays, these coils are still relatively rigid and limited in terms of design conformability, compromising signal-to-noise ratio (SNR) for flexibility, and are not designed for optimum parallel imaging performance. The purpose of this study is to report on the development and characterization of a 15-channel flexible foot and ankle coil, rapidly designed and constructed using highly decoupled radio-frequency (RF) coil elements. Coil performance was evaluated by performing SNR and g-factor measurements. In vivo testing was performed in a healthy volunteer using both the 15-channel coil and a commercially available 8-channel foot coil. The highly decoupled elements used in this design allow for extremely rapid development and prototyping of application-specific coils for different patient sizes (adult vs child) with minimal additional design consideration in terms of coil overlap and geometry. Image quality was comparable to a commercially available RF coil.
