RESUMO
The use of hybrid abutment crowns bonded extraorally to a titanium bonding base has aesthetic and biological benefits for the prosthetic rehabilitation of oral implants. The objective of this study was to evaluate the effects of luting agents between a zirconium dioxide crown and the titanium bonding base on crown/abutment retention and the subsequent durability of the prosthetic superstructure. Fifty-six implant abutment samples, all restored with a lower first premolar zirconium dioxide crown, were used and divided into seven groups (n = 8/group) according to the type of luting agent used: group 1, SpeedCEM Plus; group 2, Panavia SA Cement Universal; group 3, Panavia V5; group 4, RelyX Unicem 2 Automix; group 5, VITA ADIVA IA-Cem; group 6, Ketac CEM; and group 7, Hoffmann's Phosphate Cement. All specimens were subjected to thermomechanical loading (load of 49 N, 5 million chewing cycles and 54.825 thermocycles in water with temperatures of 5 °C and 55 °C). The surviving samples were exposed to a pull-off force until crown debonding from the bonding base. Overall, 55 samples survived the thermomechanical load. Group 2 showed the highest mean pull-off force value (762 N), whereas group 6 showed the lowest mean value (55 N). The differences between the seven groups were statistically significant (ANOVA, p < 0.001). The debonding failure pattern was mainly adhesive and was noticed predominantly at the zirconium dioxide-luting agent interface. Within the scope of the present investigation, it was shown that most of the luting agents are suitable for "cementation" of a zirconium dioxide crown onto a titanium base since the debonding forces are above a recommended value (159 N).
RESUMO
The European mistletoe (Viscum album) is an epiphytic hemiparasite that attaches to its host by an endophytic system. Two aspects are essential for its survival: the structural integrity of the host-parasite interface must be maintained during host growth and the functional integrity of the interface must be maintained during ontogeny and under mechanical stress. We investigated the mechanical properties of the mistletoe-host interaction. Intact and sliced mistletoe-host samples, with host wood as reference, were subjected to tensile tests up to failure. We quantified the rough fractured surface by digital microscopy and analysed local surface strains by digital image correlation. Tensile strength and deformation energy were independent of mistletoe age but exhibited markedly lower values than host wood samples. Cracks initiated at sites with a major strain of about 30%, especially along the mistletoe-host interface. The risk of sudden failure was counteracted by various sinkers and a lignification gradient that smooths the differences in the mechanical properties between the two species. Our results improve the understanding of the key mechanical characteristics of the host-mistletoe interface and show that the mechanical connection between the mistletoe and its host is age-independent. Thus, functional and structural integrity is ensured over the lifetime of the mistletoe.
