RESUMO
Heterodyne detection based on interband cascade lasers (ICL) has been demonstrated in a wide range of different applications. However, it is still often limited to bulky tabletop systems using individual components such as dual laser setups, beam shaping elements, and discrete detectors. In this work, a versatile integrated ICL platform is investigated for tackling this issue. A RF-optimized, two-section ICL approach is employed, consisting of a short section typically used for efficient modulation of the cavity field and a long gain section. Such a laser is operated in reversed mode, with the entire Fabry-Pérot waveguide utilized as a semiconductor optical amplifier (SOA) and the electrically separated short section as detector. Furthermore, a racetrack cavity is introduced as on-chip single-mode reference generator. The field of the racetrack cavity is coupled into the SOA waveguide via an 800â¯nm gap. By external injection of a single mode ICL operating at the appropriate wavelength, a heterodyne beating between the on-chip reference and the injected signal can be observed on the integrated detector section of the SOA-detector.
RESUMO
We present an investigation into the vertical transport through 13 different superlattice structures, where the well and barrier widths, doping concentration, dopant position, and contact layers were varied. Although superlattices have been extensively studied since 1970, there is a lack of publications on transport through superlattices similarly low doped as THz quantum cascade lasers (QCLs), for which the doping is in the 3-5×10^{10} cm^{-2} range. The superlattices presented are doped in the same range as THz QCLs, with contact layers and fabrication comparable to high-temperature THz QCLs. The temperature-dependent current-voltage characteristics were measured starting from 5 K and an anomalous temperature effect was observed at the first plateau. The measured current through the superlattice first decreases before increasing again with increasing temperature, resulting in the lowest current occurring at 75-110 K. This behavior is also observed in some THz QCLs. The effect disappears for thinner barriers, higher quantum well doping, or modified contact layers, indicating a strong dependency on band bending, due to the large difference in the doping of the contact layers and the superlattice, which is confirmed with multiscattering Büttiker simulations.
RESUMO
High-quality optical ring resonators can confine light in a small volume and store it for millions of roundtrips. They have enabled the dramatic size reduction from laboratory scale to chip level of optical filters, modulators, frequency converters, and frequency comb generators in the visible and the near-infrared. The mid-infrared spectral region (3-12 µm), as important as it is for molecular gas sensing and spectroscopy, lags behind in development of integrated photonic components. Here we demonstrate the integration of mid-infrared ring resonators and directional couplers, incorporating a quantum cascade active region in the waveguide core. It enables electrical control of the resonant frequency, its quality factor, the coupling regime and the coupling coefficient. We show that one device, depending on its operating point, can act as a tunable filter, a nonlinear frequency converter, or a frequency comb generator. These concepts extend to the integration of multiple active resonators and waveguides in arbitrary configurations, thus allowing the implementation of purpose-specific mid-infrared active photonic integrated circuits for spectroscopy, communication, and microwave generation.
RESUMO
Optical frequency-comb sources, which emit perfectly periodic and coherent waveforms of light1, have recently rapidly progressed towards chip-scale integrated solutions. Among them, two classes are particularly significant-semiconductor Fabry-Perót lasers2-6 and passive ring Kerr microresonators7-9. Here we merge the two technologies in a ring semiconductor laser10,11 and demonstrate a paradigm for the formation of free-running solitons, called Nozaki-Bekki solitons. These dissipative waveforms emerge in a family of travelling localized dark pulses, known within the complex Ginzburg-Landau equation12-14. We show that Nozaki-Bekki solitons are structurally stable in a ring laser and form spontaneously with tuning of the laser bias, eliminating the need for an external optical pump. By combining conclusive experimental findings and a complementary elaborate theoretical model, we reveal the salient characteristics of these solitons and provide guidelines for their generation. Beyond the fundamental soliton circulating inside the ring laser, we demonstrate multisoliton states as well, verifying their localized nature and offering an insight into formation of soliton crystals15. Our results consolidate a monolithic electrically driven platform for direct soliton generation and open the door for a research field at the junction of laser multimode dynamics and Kerr parametric processes.
RESUMO
Broadband emission in the terahertz spectral region is a prerequisite for applications such as spectroscopy or white light sources. Appropriate signal powers and a compact design are advantageous for this use. A technology which meets these requirements are terahertz quantum cascade lasers. These electrically pumped, on-chip semiconductor lasers provide high output powers and the freedom of tailoring their emission wavelength by bandstructure engineering. By combining multiple active region designs emitting at different wavelengths in a single structure, one can obtain broadband emission from a single device. Here, we present a heterogeneous terahertz quantum cascade laser consisting of five individual active regions based on a three-well, LO-phonon depopulation design. The devices lase in pulsed and continuous-wave operation and emit in a spectral range from 1.9 to 4.5 THz, covering a bandwidth of 1.37 octaves. The use of the three-well design, which was optimized for high temperature operation, leads to a maximum operating temperature in the pulsed operation of 143 K.
RESUMO
Pixel binning is a technique, widely used in optical image acquisition and spectroscopy, in which adjacent detector elements of an image sensor are combined into larger pixels. This reduces the amount of data to be processed as well as the impact of noise, but comes at the cost of a loss of information. Here, we push the concept of binning to its limit by combining a large fraction of the sensor elements into a single "superpixel" that extends over the whole face of the chip. For a given pattern recognition task, its optimal shape is determined from training data using a machine learning algorithm. We demonstrate the classification of optically projected images from the MNIST dataset on a nanosecond timescale, with enhanced dynamic range and without loss of classification accuracy. Our concept is not limited to imaging alone but can also be applied in optical spectroscopy or other sensing applications.
Assuntos
AlgoritmosRESUMO
Quantum cascade lasers (QCLs) facilitate compact optical frequency comb sources that operate in the mid-infrared and terahertz spectral regions, where many molecules have their fundamental absorption lines. Enhancing the optical bandwidth of these chip-sized lasers is of paramount importance to address their application in broadband high-precision spectroscopy. In this work, we provide a numerical and experimental investigation of the comb spectral width and show how it can be optimized to obtain its maximum value defined by the laser gain bandwidth. The interplay of nonoptimal values of the resonant Kerr nonlinearity and cavity dispersion can lead to significant narrowing of the comb spectrum and reveals the best approach for dispersion compensation. The implementation of high mirror losses is shown to be favorable and results in proliferation of the comb sidemodes. Ultimately, injection locking of QCLs by modulating the laser bias around the round trip frequency provides a stable external knob to control the frequency-modulated comb state and recover the maximum spectral width of the unlocked laser state.
RESUMO
Wave instability-the process that gives rise to turbulence in hydrodynamics1-represents the mechanism by which a small disturbance in a wave grows in amplitude owing to nonlinear interactions. In photonics, wave instabilities result in modulated light waveforms that can become periodic in the presence of coherent locking mechanisms. These periodic optical waveforms are known as optical frequency combs2-4. In ring microresonator combs5,6, an injected monochromatic wave becomes destabilized by the interplay between the resonator dispersion and the Kerr nonlinearity of the constituent crystal. By contrast, in ring lasers instabilities are considered to occur only under extreme pumping conditions7,8. Here we show that, despite this notion, semiconductor ring lasers with ultrafast gain recovery9,10 can enter frequency comb regimes at low pumping levels owing to phase turbulence11-an instability known to occur in hydrodynamics, superconductors and Bose-Einstein condensates. This instability arises from the phase-amplitude coupling of the laser field provided by linewidth enhancement12, which produces the needed interplay of dispersive and nonlinear effects. We formulate the instability condition in the framework of the Ginzburg-Landau formalism11. The localized structures that we observe share several properties with dissipative Kerr solitons, providing a first step towards connecting semiconductor ring lasers and microresonator frequency combs13.