4th Order LC-Based Sigma Delta Modulators.

Due to the characteristic of narrow band conversion around a central radio frequency, the Sigma Delta Modulator (ΣΔM) based on LC resonators is a suitable option for use in Software-Defined Radio (SDR). However, some aspects of the topologies described in the state-of-the-art, such as noise and nonlinear sources, affect the performance of ΣΔM. This paper presents the design methodology of three high-order LC-Based single-block Sigma Delta Modulators. The method is based on the equivalence between continuous time and discrete time loop gain using a Finite Impulse Response Digital-to-Analog Converter (FIRDAC) through a numerical approach to defining the coefficients. The continuous bandpass LC ΣΔM simulations are performed at a center frequency of 432 MHz and a sampling frequency of 1.72 GHz. To the proposed modulators a maximum Signal-to-Noise Ratio (SNR) of 51.39 dB, 48.48 dB, and 46.50 dB in a 4 MHz bandwidth was achieved to respectively 4th Order Gm-LC ΣΔM, 4th Order Magnetically Coupled ΣΔM and 4th Order Capacitively Coupled ΣΔM.

Architecture of an Electrical Equivalence Pyranometer with Temperature Difference Analog Control.

In this paper, an architecture of an electrical equivalence pyranometer with analog control of the temperature difference is presented. The classical electrical equivalence pyranometer employs a Wheatstone bridge with a feedback amplifier to keep the sensor operating at a constant temperature to estimate the incident radiation through the sensor thermal balance employing the electrical equivalence principal. However, this architecture presents limitations under ambient temperature variation, such as sensitivity variation. To overcome those limitations, we propose an architecture that controls the temperature difference between the sensor and ambient via an analog compensating circuit. Analytical results show an improvement near five times in sensitivity over the ambient temperature span and 76.3% increase of useful output voltage. A prototype was developed and validated with a commercial pyranometer, showing a high agreement on the measurement results. It is verified that the use of temperature difference, rather than constant temperature, significantly reduces the effect of ambient temperature variation.