Side-by-side determination of workers' exposure to wood dust with IOM and open-faced samplers.

Woodworkers' exposure to airborne particles is measured with different sampling techniques throughout the world. Due to a great number of exposure data obtained with different samplers, European countries have aimed over the last ten years to find a conversion factor for mass concentrations that would render these measurements comparable. Following the accepted EU standards and regulations, we replaced a 25 mm open-faced (OF) filter holder with an IOM head to determine woodworkers' exposure to inhalable dust and establish an IOM/OF sampler ratio that might serve as a reliable factor for converting the existing OF data to IOM dust mass concentration in the industrial environment. For this side-by-side sampling we used personal 25 mm OF (N=29) and IOM (N=29) sampling heads over eight working hours. The obtained IOM/OF ratios ranged between 0.7 and 2.3. However, mass concentrations obtained by IOM and OF samplers did not significantly differ. Our findings suggest that there is no need for conversion of the existing OF data for workers exposed to wood dust, provided that dust mass concentrations in the working environment range between 1 mg m-3 and 7 mg m-3. Future side-by-side measurements should also involve environments with low wood dust mass concentrations.

Wood dust exposure in wood industry and forestry.

The aim of the study was to determine occupational exposure in Croatian wood processing industry and forest workers to harmful effects of wood dust on the risk of nose, nasal cavity and lung carcinoma. Mass concentrations of respirable particles and total wood dust were measured at two wood processing plants, three woodwork shops, and one lumbering site, where 225 total wood dust samples and 221 respirable particle samples were collected. Wood dust mass concentration was determined by the gravimetric method. Mass concentrations exceeding total wood dust maximal allowed concentration (MAC, 3 mg/m3) were measured for beechwood and oakwood dust in 38% (79/206) of study samples from wood processing facilities (plants and woodwork shops). Mass concentrations of respirable particles exceeding MAC (1 mg/m3) were recorded in 24% (48/202) of samples from wood processing facilities (mean 2.38 +/- 2.08 mg/m3 in plants and 3.6 +/- 2.22 mg/m3 in woodwork shops). Thus, 13% (27/206) of work sites in wood processing facilities failed to meet health criteria according to European guidelines. Launching of measures to reduce wood dust emission to the work area is recommended.