Noise Evaluation of Coated Polymer Gears.

A comprehensive experimental investigation of the noise evaluation of coated spur polymer gears made of POM was performed in this study. The three Physical Vapour Deposition (PVD) coatings investigated were aluminium (Al), chromium (Cr), and chromium nitrite (CrN). The gears were tested on an in-house-developed testing machine under a torque of 20 Nm and at a rotational speed of 1000 rpm. The noise measurements were performed with the tested gear pair on the testing device with a sound-proof acoustic foam used for the acoustic sound-proof insulation. The sound signal was analysed in time, frequency, and time-frequency domains and typical phenomena were identified in the signal. Experimental results showed that the noise level was higher for polymer gears with different coatings if compared to the polymer gears without coatings. With sound analysis in the time-frequency domain, precise degradation of the coatings could be noticed. In future studies, it would be appropriate to use a new method for signal analysis, e.g., high-order statistics and hybrid technique.

Noise Evaluation of S-Polymer Gears.

In this study, an acoustic behaviour of S-polymer gears made of the material combination POM/PA66 was investigated and compared to the standardised involute gears (E-gears). Basic evaluating characteristics included noise during operation, which is of particular significance when noise reduction is expected. The measured signals were analysed in time and frequency domains and the levels of acoustic activity were compared. The experimental results have shown that the sound pressure level of both E- and S-polymer gears are proportional to the torque. However, the comprehensive noise evaluation has shown some advantages of S-polymer gears if compared to the E-polymer gears. In that respect, S-polymer gears were found more appropriate for noise reduction of gear drive systems in the case of normal loading and typical drive speed. Future studies in the operating behaviour of S-polymer gears could also cover noise evaluation using new methods of sound signal analysis at different temperatures of gears.

Plant protection product dose rate estimation in apple orchards using a fuzzy logic system.

In the process of applying a plant protection product mixed with water (spray mixture) at the prescribed concentration with conventional sprayers for chemical protection of tree canopies in an orchard, standard models are used to express the dose rate of the plant protection product. Characteristic properties of the tree canopy in an orchard are not taken into consideration. Such models result in fixed quantities of spray mixture being sprayed through individual nozzles into a tree canopy. In this research work, an autonomous system is presented, which ensures a controlled quantity of spray mixture sprayed through the nozzles onto different tree canopy segments. The autonomous system is based on a fuzzy logic system (FLS) that includes information about the estimated leaf area to ensure more appropriate control of the spray mixture. An integral part of the FLS is a fuzzy logic controller for three electromagnetic valves operating in the pulse width mode and installed on the axial sprayer prototype. The results showed that, with the FLS, it was possible to control the quantity of spray mixture in the specific range depending on the estimated value of the leaf area, with a quantitative spray mixture average saving of 17.92%. For the phenological growth stage BBCH 91, this method represents a powerful tool for reducing the quantity of spray mixture for plant protection in the future.