Probing the Catalytic Activity of Sulfate-Derived Pristine and Post-Treated Porous TiO2(101) Anatase Mesocrystals by the Oxidative Desulfurization of Dibenzothiophenes.

Mesocrystals (basically nanostructures showing alignment of nanocrystals well beyond crystal size) are attracting considerable attention for modeling and optimization of functionalities. However, for surface-driven applications (heterogeneous catalysis), only those mesocrystals with excellent textural properties are expected to fulfill their potential. This is especially true for oxidative desulfuration of dibenzothiophenes (hard to desulfurize organosulfur compounds found in fossil fuels). Here, we probe the catalytic activity of anatases for the oxidative desulfuration of dibenzothiophenes under atmospheric pressure and mild temperatures. Specifically, for this study, we have taken advantage of the high stability of the (101) anatase surface to obtain a variety of uniform colloidal mesocrystals (approximately 50 nm) with adequate orientational order and good textural properties (pores around 3-4 nm and surface areas around 200 m2/g). Ultimately, this stability has allowed us to compare the catalytic activity of anatases that expose a high number of aligned single crystal-like surfaces while differing in controllable surface characteristics. Thus, we have established that the type of tetrahedral coordination observed in these anatase mesocrystals is not essential for oxidative desulfuration and that both elimination of sulfates and good textural properties significantly improve the catalytic activity. Furthermore, the most active mesocrystals have been used to model the catalytic reaction in three-(oil-solvent-catalyst) and two-phase (solvent-catalyst) systems. Thus, we have been able to observe that the transfer of DBT from the oil to the solvent phase partially limits the oxidative process and to estimate an apparent activation energy for the oxidative desulfuration reaction of approximately 40 kJ/mol in the two-phase system to avoid mass transfer limitations. Our results clearly establish that (101) anatase mesocrystals with excellent textural properties show adequate stability to withstand several post-treatments without losing their initial mesocrystalline character and therefore could serve as models for catalytic processes different from the one studied here.

Synthesis and characterization of SBA-3, SBA-15, and SBA-1 nanostructured catalytic materials.

A highly ordered large pore mesoporous silica molecular sieve SBA-3, SBA-15, Al-SBA-15, and SBA-1, were developed and characterized by XRD, BET, FTIR, SEM, and NMR-MAS. The catalytic materials were synthesized using different raw materials and operation conditions. These materials contain a regular arrangement of uniform channels with diameters between 1.8 and 10 nm, high specific surface area and high specific pore volume. The designed methods were effective for the synthesis, presenting each mesostructured materials, patterns of XRD and other characteristics corresponding to the reported ones in literature. The new route employed to synthesize Al-SBA-15, generates a catalyst with only aluminum in tetrahedral form, according to the data of (27)Al NMR-MAS. However, several reports indicated that the coordination of the Al atoms changes below the Si/Al ratio of 45, presenting peaks corresponding to penta and hexa-coordinated aluminum, which are absent in our samples (Si/Al = 50 and 33).