Thermoluminescence and ATR-FTIR study of UVC-irradiated low-density polyethylene (LDPE) food packaging.

This research aims to study the effects of ultraviolet C (UVC) radiation on low-density polyethylene (LDPE) food packaging. Main objectives include evaluating LDPE degradation and detecting UVC radiation using thermoluminescent dosimeters (TLDs) placed under LDPE samples. Results confirm accurate UVC detection after one hour of exposure, providing a useful tool for optimize food treatment procedures. ATR-FTIR spectroscopy analysis revealed subtle alterations (<8 % transmittance relative) in UVC-irradiated LDPE samples, including possible CH breakage (2910 and 2848 cm-1) and potential CC bond vibrations (1470 cm-1), among others. However, observed variations may stem from LDPE properties rather than entirely from UVC radiation. A comparative study of UVC-induced thermoluminescence (TL) emissions provided insights into various TLDs materials. TL kinetic analysis, using computerised glow curve deconvolution (CGCD) method, unveiled trap charge activation due to UVC exposure, including partial ionization, bleaching effect and photo-transfer (PTTL) processes. LDPE samples amplified UVC-TL responses, revealing intensity differences between the TLDs attributed to the PTTL process, accentuated by the lack of an annealing treatment. Additionally, chemical composition of the TL detectors such as, type, concentration, number, oxidation states and ionic radii of their dopants may influence UVC-TL response. Consequently, TL intensity ratios follow as: GR-200 (LiF: Mg, Cu, P) > TLD-100 (LiF: Ti, Mg) > TLD-400 (CaF2: Mn) > TLD-200 (CaF2: Dy). Thus, GR-200 detects ionizing radiation but cannot distinguish between ionizing and non-ionizing UVC radiation, while TLD-100 has limited effectiveness as a UVC radiation detector. In contrast, TLD-400 is suitable for detecting UVC radiation and TLD-200 emerges as the most favorable UVC detector, showing consistent response levels and minimal PTTL effect placed under the LDPE samples without the need of a thermal annealing treatment that makes the TLD-200 to be reusable in a low-cost measurement protocol.

Radiological characterization of the tailings of an abandoned copper mine using a neural network and geostatistical analysis through the Co-Kriging method.

The radiological characterization of soil contaminated with natural radionuclides enables the classification of the area under investigation, the optimization of laboratory measurements, and informed decision-making on potential site remediation. Neural networks (NN) are emerging as a new candidate for performing these tasks as an alternative to conventional geostatistical tools such as Co-Kriging. This study demonstrates the implementation of a NN for estimating radiological values such as ambient dose equivalent (H*(10)), surface activity and activity concentrations of natural radionuclides present in a waste dump of a Cu mine with a high level of natural radionuclides. The results obtained using a NN were compared with those estimated by Co-Kriging. Both models reproduced field measurements equivalently as a function of spatial coordinates. Similarly, the deviations from the reference concentration values obtained in the output layer of the NN were smaller than the deviations obtained from the multiple regression analysis (MRA), as indicated by the results of the root mean square error. Finally, the method validation showed that the estimation of radiological parameters based on their spatial coordinates faithfully reproduced the affected area. The estimation of the activity concentrations was less accurate for both the NN and MRA; however, both methods gave statistically comparable results for activity concentrations obtained by gamma spectrometry (Student's t-test and Fisher's F-test).

Identification of defect centers responsible for thermoluminescence emission in sol-gel synthesized calcium silicate phosphor.

The thermoluminescence (TL) of calcium silicate phosphor (CSO) prepared by the sol-gel method and sintered at 1200 °C were investigated. From Tm-Tstop curve, TL emission spectrum and computer deconvolution using electron traps with discrete and continuous distributions, the glow curves were found to be composed of four TL peaks (117, 190, 250 and 275 °C) with a single emission band centered at 370 nm. Electron paramagnetic resonance (EPR) investigation has been carried out to identify the defect centers formed in the CSO phosphor by γ-irradiation and find the centers related to the TL process in the phosphor. At room temperature, three defect centers were observed. The first center, characterized by the principal g-values of 2.014, 2.011, and 2.0080 was assigned to an O- ion. The second center with g-values 2.015, 2.013, and 2.010 is also attributed to an O- ion and is associated with the TL peak at 280 °C. The third center, with an isotropic g-value of 2.0011 was identified as the F+ center (singly ionized oxygen vacancy) and relates to the TL peak at 280 °C.

Coronavirus pandemic: An opportunity to study the anthropogenic impact on micro-climate conditions and CaCO3 crystal morphology in the Nerja Cave (SE Spain).

Following the declaration of the COVID-19 pandemic, the Spanish Government restricted non-essential movements of all citizens and closed all public spaces, such as the Nerja Cave, until May 31, 2020. This particular condition of the closure of the cave provided a unique opportunity to study the micro-climate conditions and carbonate precipitation in this tourist cave without the presence of visitors. Our results show the significant effect of visitors on the air isotopic signature of the cave and on the genesis of the extensive dissolution features affecting the carbonate crystals formed in the tourist sector of the cave, alerting us to the possible corrosion of the speleothems located there. The movement of visitors within the cave also favours the mobilisation of aerial fungi and bacterial spores and their subsequent sedimentation simultaneously with the abiotic precipitation of carbonates from the drip water. The traces of these biotic elements could be the origin of the micro-perforations previously described in the carbonate crystals formed in the tourist galleries of the cave, but they are subsequently enlarged due to abiotic dissolution of the carbonates through these weaker zones.

Comparing the effect of electron beam, beta and ultraviolet C exposure on the luminescence emission of commercial dosimeters.

This paper reports on the luminescence characterization of TLD-100 (LiF: Ti, Mg), TLD-200 (CaF2: Dy), TLD-400 (CaF2: Mn) and GR-200 (LiF: Mg, Cu, P) dosimeters exposed to electro beam, beta and ultraviolet C radiation -UVC-. All of them show high sensitivity to radiation regardless of whether it is ionizing or partially ionizing radiation based on their luminescence properties (cathodoluminescence -CL- or thermoluminescence -TL-). CL emission differs significantly among them in shape and intensity due to their chemical compositions. LiF samples display three maxima at: (i) 300-450 nm linked to intrinsic and structural defects, (ii) a green waveband probably due to F3+ centres or the presence of hydroxyl groups and (iii) the red-infrared emission band associated with F2 centres. However, CL spectra from the CaF2 dosimeters display meaningful differences due to the dopant. TLD-200 is characterized by an emission with four sharp individual peaks in the green-IR spectral region (due to the Dy3+), whilst TLD-400 exhibits a broad maximum peaked at Ì´500 nm (linked to the Mn2+). On the other hand, the variation in the TL glow curves allows to discriminate the TLDs exposed to beta and UVC radiation since they give rise to different chemical-physical processes and that have been studied from the estimation of the kinetic parameters by means of the Computerised Glow Curve Deconvolution (CGCD) method.

The effect of pregnancy on metabolic scaling and population energy demand in the viviparous fish Gambusia affinis.

Metabolism is a fundamental attribute of all organisms that influences how species affect and are affected by their natural environment. Differences between sexes in ectothermic species may substantially alter metabolic scaling patterns, particularly in viviparous or live-bearing species where females must support their basal metabolic costs and that of their embryos. Indeed, if pregnancy is associated with marked increases in metabolic demand and alters scaling patterns between sexes, this could in turn interact with natural sex ratio variation in nature to affect population-level energy demand. Here, we aimed to understand how sex and pregnancy influence metabolic scaling and how differences between sexes affect energy demand in Gambusia affinis (Western mosquitofish). Using the same method, we measured routine metabolic rate in the field on reproductively active fish and in the laboratory on virgin fish. Our data suggest that changes in energy expenditure related to pregnancy may lead to steeper scaling coefficients in females (b = 0.750) compared to males (b = 0.595). In contrast, virgin females and males had similar scaling coefficients, suggesting negligible sex differences in metabolic costs in reproductively inactive fish. Further, our data suggest that incorporating sex differences in allometric scaling may alter population-level energy demand by as much as 20-28%, with the most pronounced changes apparent in male-biased populations due to the lower scaling coefficient of males. Overall, our data suggest that differences in energy investment in reproduction between sexes driven by pregnancy may alter allometric scaling and population-level energy demand.

Preliminary study on the thermally stimulated luminescence characterization of UVC and beta irradiated tridymite.

Thermoluminescence (TL) emission of tridymite, a quartz-like mineral, could be used for a variety purposes, including basic research, ceramic technology, traditional/medical industry, and dating. The current study focused on the investigation of the thermal effects on both the luminescence emission and structural properties of natural tridymite. Thermally stimulated luminescence of beta and UVC irradiated samples exhibits complex glow curves indicating simultaneous physical-chemistry processes such as phase transitions, dehydration, dehydroxylation or redox reactions involving intrinsic defects (O vacancies giving rise to F+ and F-type centers, Schottky and Frenkel defects), extrinsic defects (dopants) and structural defects (stacking fault defects, linear and planar defects or dislocations). TL glow curves can be analyzed despite the complexity by assuming that photon emission can be fitted to 1st order kinetics. The structural changes observed using thermal X-ray diffraction up to 200 °C indicate that the Miller indices (204) and (321) have only a reversible behavior in the range of 26-29° 2θ. Tests based on the TL also corroborate such reversibility.

A kinetic model for the thermoluminescent high dose response of LiF:Mg,Cu,P (MCP-N).

This contribution describes a kinetic model attempting to reproduce the response of the thermoluminescent material LiF:Mg,Cu,P when it is irradiated to absorbed dose values in the kGy range. The modelling is based on the hypothesis of a relationship between the irradiation time (i.e. the absorbed dose) and the density of trapping/recombination centres. X-ray diffraction and thermal X-ray diffraction measurements have been performed to investigate the potential radiation and thermal damage on the structure of the material, including the possibility of partial phases. The proposed kinetic model qualitatively reproduces the observed changes in the TL glow curve for temperatures above the main peak as well as the two observed regions of absorbed dose response: linear and sub-linear.

Uranium content and uranium isotopic disequilibria as a tool to identify hydrogeochemical processes.

This paper studies the uranium content and uranium isotopic disequilibria as a tool to identify hydrogeochemical processes from 52 groundwater samples in the province of Granada (Betic Cordillera, southeastern Spain). According to the geological complexity of the zone, three groups of samples have been considered. In Group 1 (thermal waters; longest residence time), the average uranium content was 2.63 ± 0.16 µg/L, and 234U/238U activity ratios (AR) were the highest of all samples, averaging 1.92 ± 0.30. In Group 2 (mainly springs from carbonate aquifers; intermediate residence time), dissolved uranium presented an average value of 1.34 ± 0.13 µg/L, while AR average value was 1.38 ± 0.25. Group 3 comes from pumping wells in a highly anthropized alluvial aquifer. In this group, where the residence time of the groundwater is the shortest of the three, average uranium content was 5.28 ± 0.26 µg/L, and average AR is the lowest (1.17 ± 0.12). In addition, the high dissolved uranium value and the low AR brought to light the contribution of fertilizers (Group 3). In the three groups, 235U/238U activity ratios were similar to the natural value of 0.046. Therefore, 235U detected in the samples comes from natural sources. This study is completed with the determination of major ions and physicochemical parameters in the groundwater samples and the statistical analysis of the data by using the Principal Component Analysis. This calculation indicates the correlation between uranium isotopes and bicarbonate and nitrate anions.

Coupling air temperature records and gravimetric data to interpret ventilation patterns in a Mediterranean karstic system (Nerja-Pintada caves, southern Spain).

Microclimate and geophysical studies are commonly applied to the characterization of karst systems although they are usually used separately. The main purpose of this manuscript is to show how the analysis of the data from both these research methods is a useful tool in the characterization of karst systems and we present the analysis of a specific case study: the Nerja- Pintada caves system. The joint analysis of the Nerja Cave and external air data (mainly temperatures) and the pre-existing gravimetric data of its surroundings (residual gravity anomaly map) have allowed us: 1) to postulate the existence of an unknown great cavity located near to the Nerja Cave and with direct influence in its ventilation and 2) to propose a new model of the Nerja-Pintada caves ventilation based on the changing connection between a "main cavity" system (Nerja Cave), with basically a transmissive function of airflows and an "annex cavities" sub-system, with different functioning as far as the airflow is concerned: transmissive in the case of Pintada Cave and capacitive in the case of the geophysically-located cave.

Role of CO2 in low to medium enthalpy geothermal systems in the Central Betic Cordillera (Spain).

There is growing interest in geothermal energy, which is considered as an efficient energy solution to mitigate rising atmospheric CO2. Besides known high enthalpy geothermal systems, increasing attention is paid to low temperature geothermal systems, as they are suitable for local use. Although geothermal production seems to be an environmentally advantageous renewable energy, it might result in significant CO2 emissions. In this study, we investigate the relationship between temperature, fugacity of CO2 (fCO2), and mineral buffers in the reservoir conditions, taking the low- to medium- enthalpy thermal waters in the Central Betic Cordillera as case study. Using geochemical modeling, three main groups of waters have been identified depending on temperature, buffering mineral assemblage, and fCO2 in their reservoir. A group of waters with a reservoir temperature ranging from 70 to 90 °C and located in the intramountain sedimentary basins shows a fCO2 in depth ranging from ~6 × 10-2 and 6 × 10-1. The reservoir chemistry of this water group seems to be mainly controlled by carbonates and evaporites displaying a fCO2 variation between depth and surface (ΔfCO2) of 10-1. Another intermediate group of waters, located in an active extension zone, displays lower temperature (50-60 °C) and fCO2 in the reservoir (from 10-3 to 10-2). Finally, the third group of waters, located on the metamorphic complexes contacts, show the highest estimated temperatures (130-140 °C) and fCO2 in the reservoir (1 to 102). The two latter groups suggest increasing buffering effect of alumino-silicates, in addition to carbonates and quartz. Therefore, we evidenced a strong relationship between temperature and fCO2 in the reservoir as well as the potential mineral buffers. We discussed the potential of geothermal systems as clean energy source based on the estimation of the CO2 emissions generated by the investigated thermal systems for a practical case of household heating.

Thermoluminescence glow curve deconvolution for discrete and continuous trap distributions.

Deconvolution analysis of the thermoluminiscent (TL) glow curves proved to be a good complementary method to characterize the individual glow peaks by fitting their kinetic parameters. In this work, new software has been developed for the automatic deconvolution of TL glow curves, assuming either discrete or continuous distribution of trapping centres. The guess estimation of the kinetic parameters is done automatically and can be manually modified, thus allowing the use of the software for routine, processing a large number of measurements, as well as for research purposes. The equations, the methods and the results of the first test are described in detail. The software has been developed by integrating Fortran code and Visual Studio tools to create a graphic easy-to-use environment and permits to obtain the fitted values for the parameters according to the considered model.

Eco-friendly modification of a regenerated cellulose based film by silicon, carbon and N-doped carbon quantum dots.

Modification of a regenerated cellulose thin film by inclusion of different non-toxic nanodots (silicon-dots (SiDs), carbon-dots (CDs)) or nitrogen-doped carbon dots (N-CDs)) by aqueous nanodots solution immersion was performed. Nanodots presence into the cellulosic structure was evidenced by confocal microscopy images at different depth and changes in film mechanical, electrical and optical parameters. Our results reveal that the inclusion of the different nanodots in the cellulosic support increases, indifferent percentages, the mechanical resistance and electrical conductivity of modified films, but they hardly affect light transmittance. Particularly, modification with N-CDs largely favored film conductivity due to the presence of the higher number of charged functional groups (CNH2 and OCNH2) groups) on N-CDs surface, allowin gus the attainment of a flexible, fluorescent and transparent high conductive eco-friendly film. In fact, the non-toxic character of both support-film and nanodots, endorses the use of these new nano-engineering films in biomedical applications.

Highlighting the importance of transitional ventilation regimes in the management of Mediterranean show caves (Nerja-Pintada system, southern Spain).

This study shows the utilization of the air CO2 exhaled by a very high number of visitors in the Nerja Cave as both a tracer and an additional tool to precisely evaluate the air circulation through the entire karst system, which includes non-touristic passages, originally free of anthropogenic CO2. The analysis of the temporal - spatial evolution of the CO2 content and other monitoring data measured from January 2015 to December 2016 in the Nerja-Pintada system, including air microbiological controls, has allowed us to define a new general ventilation model, of great interest for the conservation of the subterranean environment. During the annual cycle four different ventilation regimes and two ventilation modes (UAF-mode and DAF-mode) exist which determine the significance of the anthropogenic impact within the caves. During the winter regime, the strong ventilation regime and the airflow directions from the lowest to the highest entrance (UAF-mode) contribute to the rapid elimination of anthropogenic CO2, and this affects the whole karstic system. During the summer regime the DAF-mode ventilation (with airflows from the highest to the lowest entrances) is activated. Although the number of visitors is maximum and the natural ventilation of the karstic system is the lowest of the annual cycle, the anthropogenic impact only affects the Tourist Galleries. The transitional ventilation regimes -spring and autumn- are the most complex of the annual cycle, with changing air-flow directions (from UAF-mode to DAF-mode and vice versa) at diurnal and poly diurnal scale, which conditions the range of the anthropogenic impact in each sector of the karst system. The activation of the DAF-mode has been observed when the temperature difference between the external and air cave is higher than 5°C.

DETERMINATION AND DOSE CONTRIBUTION OF URANIUM ISOTOPES AND 210Po ACTIVITY CONCENTRATIONS OF NATURAL SPRING WATERS IN THE PROVINCE OF GRANADA, SPAIN.

The activity concentrations of alpha-emitters comprising isotopes of uranium (238, 234, 235U) and polonium (210Po) were measured using alpha-particle spectrometry in natural spring waters in the province of Granada, Spain. These water are consumed by the population of the zone who live in villages. This is almost half of the population of the whole region. Mean values of activity concentrations found are 42.61 ± 2.66; 49.55 ± 3.03; 1.64 ± 0.28 and 1.74 ± 0.15 mBq L-1 for 238U, 234U, 235U and 210Po, respectively. Finally, the radiological impact of the analysed waters has been determined, in terms of the estimation of the committed annual effective dose due to the ingestion of the water. The assessment has been carried out for five age groups with the aim to cover all the population. The calculated annual effective doses are observed to be below the prescribed dose limit of 100 µSv y-1 recommended by WHO.

Inclusion of silver nanoparticles for improving regenerated cellulose membrane performance and reduction of biofouling.

The preparation of silver nanoparticles (AgNPs) and their incorporation into the structure of a regenerated cellulose membrane by dip coating is presented. Morphological characterization of the AgNPs (average diameter of 20±2nm) was carried out by SEM/TEM, while elastic, electrical and antimicrobial properties of the hybrid membrane were also analyzed. The presence of silver nanoparticles in the membrane seems to increases its rigidity and its chemical stability against oxidation, but it only induces small changes in the transport parameters. As expected, AgNPs provide antimicrobial properties to the membrane and consequently the reduction of biofouling without affecting significantly other characteristic parameters, opening the application of the modified membrane to wastewaters treatment.

Characterization of cellulose membranes modified with luminescent silicon quantum dots nanoparticles.

A highly hydrophilic planar membrane fabricated with regenerated cellulose (RC-4 membrane), a biocompatible polymer, was modified by inclusion of water-soluble silicon quantum dot nanoparticles (SiQDs). Both bare SiQDs and SiQDs coated with a PAMAM-OH dendrimer were employed in order to obtain luminescent and thermally stable membrane systems (RC-4/SiQDs and RC-4/SiQDs-PAMAM-OH membranes). Original and SiQDs-modified membranes were characterized by fluorescence spectroscopy (steady and confocal), derivative thermogravimetric analysis and impedance spectroscopy measurements. According to these results, both SiQDs-regenerated cellulose composite membranes present luminescent character as well as higher thermal resistance and conductivity than the original sample, although the dendrimer coverage of the SiQDs might partially shield such effects. Moreover, the permanence of SiQDs nanoparticles in the structure of the cellulosic support in aqueous environments and their effect on diffusive transport were determined by water uptake as well as by membrane potential measurements at different concentrations of a model electrolyte (KCl). These results demonstrate the possible use of these stable nano-engineered membranes, which are based on SiQDs nanoparticles, in electrochemical devices under flow conditions.

Verification of absorbed dose rates in reference beta radiation fields: Measurements with an extrapolation chamber and radiochromic film.

Beta Secondary Standard 2 (BSS 2) provides beta radiation fields with certified values of absorbed dose to tissue and the derived operational radiation protection quantities. As part of the quality assurance, the reliability of the CDTN BSS2 system was verified through measurements in the 90Sr/90Y and 85Kr beta radiation fields. Absorbed dose rates and their angular variation were measured with a 23392 model PTW extrapolation chamber and with Gafchromic radiochromic films on a PMMA slab phantom. The feasibility of using both methods was analyzed.

CIEMAT EXTERNAL DOSIMETRY SERVICE: ISO/IEC 17025 ACCREDITATION AND 3 Y OF OPERATIONAL EXPERIENCE AS AN ACCREDITED LABORATORY.

In 2008, the CIEMAT Radiation Dosimetry Service decided to implement a quality management system, in accordance with established requirements, in order to achieve ISO/IEC 17025 accreditation. Although the Service comprises the approved individual monitoring services of both external and internal radiation, this paper is specific to the actions taken by the External Dosimetry Service, including personal and environmental dosimetry laboratories, to gain accreditation and the reflections of 3 y of operational experience as an accredited laboratory.

Neutron spectra due (13)N production in a PET cyclotron.

Monte Carlo and experimental methods have been used to characterize the neutron radiation field around PET (Positron Emission Tomography) cyclotrons. In this work, the Monte Carlo code MCNPX was used to estimate the neutron spectra, the neutron fluence rates and the ambient dose equivalent (H*(10)) in seven locations around a PET cyclotron during (13)N production. In order to validate these calculations, H*(10) was measured in three sites and were compared with the calculated doses. All the spectra have two peaks, one above 0.1MeV due to the evaporation neutrons and another in the thermal region due to the room-return effects. Despite the relatively large difference between the measured and calculated H*(10) for one point, the agreement was considered good, compared with that obtained for (18)F production in a previous work.