Natural deep eutectic solvents in combination with ultrasonic energy as a green approach for solubilisation of proteins: application to gluten determination by immunoassay.

In this work, a fast and miniaturised procedure based on the use of a natural deep eutectic solvent (NADES) in combination with ultrasound-assisted extraction (UAE) has been proposed for gluten determination by a commercial enzyme-linked immunosorbent assay (ELISA). Fourteen NADESs were prepared by combining two natural primary metabolites and water. Studies on NADES viscosity and gluten solubilisation in NADESs and ethanol-water solutions (for comparison purposes) were carried out. Different strategies for speeding-up gluten solubilisation in NADESs were evaluated: dilution, temperature and sonication by a cup-horn sonoreactor. Diluted fructose-citric acid NADES and sonication were finally selected for gluten solubilisation. Solubilised proteins were characterized by electrophoresis and molecular fluorescence. The proposed procedure was also assessed in real samples, especially ultrasound time. Kit solvents (including reducing agents) were replaced by NADES, and hence, a reassessing of immunoassay system was necessary. Samples with and without gluten as well as recovery tests were used for this purpose. Recoveries were in the range of 79-106% and the repeatability, expressed as relative standard deviation, was better than 15%.

Facile preparation of an immobilized surfactant-free palladium nanocatalyst for metal hydride trapping: a novel sensing platform for TXRF analysis.

In this work, a simple route for the synthesis of surfactant-free immobilized palladium nanoparticles (Pd NPs) and their use as effective nanocatalysts for metal hydride decomposition is described. A mixture of ethanol : water was used as the reducing agent. Ethanol was added in a large excess to reduce the ionic Pd and stabilize the obtained Pd NPs. Ethanol is adsorbed on the surface of Pd allowing steric stabilization. Freshly prepared Pd NPs were immobilized onto quartz substrates modified with 3-mercaptopropyltrimethoxysilane. Pd interacts with the thiol group of the alkoxysilane that is adsorbed on the surface of NPs without the dissociation of the S-H bond. Different parameters affecting the synthesis of Pd NPs and their immobilization onto quartz substrates were evaluated. A comprehensive characterization of the synthesized Pd NPs was carried out by transmission electron microscopy (TEM), whereas total reflection X-ray fluorescence (TXRF) spectrometry was applied in order to evaluate their catalytic activity for solid-gas reactions. Immobilized Pd NPs were applied as nanocatalysts for the dissociative chemisorption of arsine at room temperature, yielding the formation of As-Pd bonds. Quartz substrates coated with nanosized Pd could be used as novel sensing platforms for total reflection X-ray fluorescence analysis. Arsenic can be detected in situ in natural water with a limit of detection of 0.08 µg L(-1).

Coumarins as turn on/off fluorescent probes for detection of residual acetone in cosmetics following headspace single-drop microextraction.

In this work, a new method based on headspace-single drop microextraction for the determination of residual acetone in cosmetics by microfluorospectrometry is proposed. Acetone causes fluorescence changes in a 2.5 µL-ethanolic drop (40% v/v) containing 3.10(-4) mol L(-1) 7-hydroxy-4-methylcoumarin ('turn off') or 6.10(-6) mol L(-1) 7-diethylamino-4-methylcoumarin ('turn on'). Polarity and ability to form hydrogen bonds of short chain alcohols (polar protic solvents) were crucial in order to observe these changes in the presence of acetone (polar aprotic solvent). Parameters related with the HS-SDME procedure were studied, namely headspace volume, composition, volume and temperature of drop, microextraction time, stirring rate, mass and temperature of sample, as well as the effect of potential interferents (alcohols and fragrances). The high volatility of acetone allows its extraction from an untreated cosmetic sample within 3 min. A detection limit of 0.26 µg g(-1) and repeatability, expressed as relative standard deviation, around 5% were reached. Accuracy of the proposed methodology was evaluated by means of recovery studies. The method was successfully used to analyze different cosmetics. Simplicity and high sample throughput can be highlighted.

Ultrasensitive, simple and solvent-free micro-assay for determining sulphite preservatives (E220-228) in foods by HS-SDME and UV-vis micro-spectrophotometry.

A new method based on headspace single-drop microextraction in combination with UV-vis micro-spectrophotometry has been developed for the ultrasensitive determination of banned sulphite preservatives (E220-228) in fruits and vegetables. Sample acidification was used for SO2 generation, which is collected onto a 5,5'-dithiobis-(2-nitrobenzoic acid) microdrop for spectrophotometric measurement. A careful study of this reaction was necessary, including conditions for SO2 generation from different sulphating salts, drop pH, 5,5'-dithiobis-(2-nitrobenzoic acid) concentration and potential interference effects. Variables influencing mass transfer (stirring, sample volume and addition of salt) and microextraction time were also studied. A simple sulphite extraction was carried out, and problems caused by oxidation during the extraction process were addressed. A high enrichment factor (380) allows the determination of low levels of free SO2 in fruits and vegetables (limit of detection 0.06 µg g(-1), limit of quantification 0.2 µg g(-1)) with an adequate precision (repeatability, relative standard deviation 5 %). In addition, the sulphiting process was studied through the monitoring of residual SO2 in a vegetal sample, thus showing the importance of a sensitive tool for SO2 detection at low levels.

Ultrasound-assisted single extraction tests for rapid assessment of metal extractability from soils by total reflection X-ray fluorescence.

In this work, ultrasound-assisted extraction (UAE) was employed for acceleration of metal extraction from soil samples. After extraction, multielemental analysis (Cr, Mn, Fe, Ni, Cu, Zn and Pb) of EDTA and acetic acid extracts was performed by total reflection X-ray fluorescence spectrometry (TXRF). High-intensity ultrasonic processors, i.e. the ultrasonic probe (50W) and the cup-horn sonoreactor (200W) were applied. Both ultrasonic procedures were compared with a miniaturized version of the single extraction scheme proposed by the Standards, Measurements and Testing program (SM&T). The extraction time with EDTA was reduced from 1h (conventional procedure) to 2 min (ultrasonic probe) or to 10 min (cup-horn sonoreactor). The time required for acetic acid extraction was also reduced from 16 h (conventional procedure) to 6 min (ultrasonic probe) or to 30 min (cup-horn sonoreactor). In addition, the amount of sample and extractants was drastically reduced as a result of the miniaturization implemented in the developed approaches. The combination of UAE and TXRF allows assessing the potential metal mobility and bioavailability in a simple way.

Ion pair-based dispersive liquid-liquid microextraction for gold determination at ppb level in solid samples after ultrasound-assisted extraction and in waters by electrothermal-atomic absorption spectrometry.

A new methodology was developed for the determination of ultratrace levels of gold in water samples, soils and river sediments. Dispersive liquid-liquid microextraction was used to preconcentrate the ion pair formed between AuCl(4)(-) and [CH(3)(CH(2))(3)](4)N(+) in a microliter-range volume of chlorobenzene using acetone as disperser solvent. When solid samples were analyzed, the method consisted of a combination of ultrasound-assisted extraction and dispersive liquid-liquid microextraction with final detection by electrothermal-atomic absorption spectrometry. Since an HCl medium was required for the formation of the AuCl(4)(-) complex, HCl together with HNO(3) was used as extractants for ultrasound-assisted extraction. After optimization, the enrichment factor obtained was 220 for water samples. Moreover, the extraction efficiency was around 96%. The repeatability, expressed as relative standard deviation ranged from 3.6% to 9.7%. The instrumental detection limit was 8.4 ng L(-1), whereas the procedural detection limits were 42 ng L(-1) for water samples and 1.5 ng g(-1) for environmental solid samples.

Simultaneous ultrasound-assisted emulsification-derivatization as a simple and miniaturized sample preparation method for determination of nitrite in cosmetic samples by microvolume UV-vis spectrophotomety.

A simple and miniaturized approach based on ultrasound-assisted emulsification-derivatization is proposed for the determination of nitrite in cosmetic samples by UV-vis micro-spectrophotometry. Oil/water emulsions were formed using 15 mg of cosmetic sample and 1 mL of an aqueous medium containing 0.5% w/v SDS and 1% v/v acetic acid. When powerful sonication systems were used to make emulsions, i.e. probe or cup-horn sonoreactor, stable and transparent emulsions were obtained in one or half minute per sample, respectively. The Griess reaction in these special conditions (i.e. sonication and the presence of an organized medium) was investigated. The absence of matrix effects allows external calibration with aqueous standards for nitrite quantification. Analytical features were compared to those of the European official method 82/434/EEC. Detection limit, sample throughput and reagent consumption were significantly improved.

Evaluation of ultrasound-assisted extraction as sample pre-treatment for quantitative determination of rare earth elements in marine biological tissues by inductively coupled plasma-mass spectrometry.

In this work, the determination of rare earth elements (REEs), i.e. Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu in marine biological tissues by inductively coupled-mass spectrometry (ICP-MS) after a sample preparation method based on ultrasound-assisted extraction (UAE) is described. The suitability of the extracts for ICP-MS measurements was evaluated. For that, studies were focused on the following issues: (i) use of clean up of extracts with a C18 cartridge for non-polar solid phase extraction; (ii) use of different internal standards; (iii) signal drift caused by changes in the nebulization efficiency and salt deposition on the cones during the analysis. The signal drift produced by direct introduction of biological extracts in the instrument was evaluated using a calibration verification standard for bracketing (standard-sample bracketing, SSB) and cumulative sum (CUSUM) control charts. Parameters influencing extraction such as extractant composition, mass-to-volume ratio, particle size, sonication time and sonication amplitude were optimized. Diluted single acids (HNO(3) and HCl) and mixtures (HNO(3)+HCl) were evaluated for improving the extraction efficiency. Quantitative recoveries for REEs were achieved using 5 mL of 3% (v/v) HNO(3)+2% (v/v) HCl, particle size <200 µm, 3 min of sonication time and 50% of sonication amplitude. Precision, expressed as relative standard deviation from three independent extractions, ranged from 0.1 to 8%. In general, LODs were improved by a factor of 5 in comparison with those obtained after microwave-assisted digestion (MAD). The accuracy of the method was evaluated using the CRM BCR-668 (mussel tissue). Different seafood samples of common consumption were analyzed by ICP-MS after UAE and MAD.

Classification of cultivated mussels from Galicia (northwest Spain) with European Protected Designation of Origin using trace element fingerprint and chemometric analysis.

Inductively coupled plasma-mass spectrometry (ICP-MS) in combination with different supervised chemometric approaches has been used to classify cultivated mussels in Galicia (Northwest of Spain) under the European Protected Designation of Origin (PDO). 158 mussel samples, collected in the five rías on the basis of the production, along with minor and trace elements, including high field strength elements (HFSEs) and rare earth elements (REEs), were used with this aim. The classification of samples was achieved according to their origin: Galician vs. other regions (from Tarragona, Spain, and Ethang de Thau, France) and between the Galician Rías. The ability of linear discriminant analysis (LDA), soft independent modelling of class analogy (SIMCA) and artificial neural network (ANN) to classify the samples was investigated. Correct assignations for Galician and non-Galician samples were obtained when LDA and SIMCA were used. ANNs were more effective when a classification according to the ría of origin was to be applied.

Ultrasound-assisted emulsification of cosmetic samples prior to elemental analysis by different atomic spectrometric techniques.

In this work, ultrasound-assisted emulsification with a probe system is proposed as a rapid and simple sample treatment for atomic spectrometric determinations (Electrothermal Atomic Absorption Spectrometry, Inductively Coupled Plasma Optical Emission Spectrometry, Flame Atomic Absorption Spectrometry and Cold Vapour Atomic Absorption Spectrometry) of trace elements (As, Cd, Cr, Cu, Hg, Mg, Mn, Ni, Sr and Zn) in cosmetic samples such as shampoos, gel (hair gel), crèmes (body milk, hair conditioner) and oil (body oil). The type of dispersion medium, the sample mass-to-dispersion medium volume ratio, as well as the parameters related to the ultrasound-assisted emulsification (sonication amplitude and treatment time) were exhaustively studied. Only 1 min of ultrasonic shaking and a dispersion medium containing 0.5% (w/v) of SDS+3% (v/v) of HNO(3) or HCl allows obtaining a stable emulsion at least for 3 months. Thermal programs, nebulization of emulsions, speed of pumps and concentration of reagents used in cold vapour generation were optimized. Calibration using aqueous standards was feasible in all cases. Calibration by the standard addition method and recovery studies was also applied for validation. Microwave-assisted digestion and Inductively Coupled Plasma Mass Spectrometry were used for comparison purposes. Relative standard deviations from analysis of five independent emulsions were less than 9% in all cases.

Microvolume turbidimetry for rapid and sensitive determination of the acid labile sulfide fraction in waters after headspace single-drop microextraction with in situ generation of volatile hydrogen sulfide.

In this work, we demonstrate the feasibility of applying headspace single-drop microextraction with in-drop precipitation for the quantitative determination of the acid labile sulfide fraction (H2S, HS-, and S2- (free sulfide), amorphous FeS and some metal sulfide complexes-clusters as ZnS) in aqueous samples by microvolume turbidimetry. The methodology lies in the in situ hydrogen sulfide generation and subsequent sequestration into an alkaline microdrop containing ZnO(2)(2-) and exposed to the headspace above the stirred aqueous sample. The ZnS formed in the drop was then determined by microvolume turbidimetry. The optimum experimental conditions of the proposed method were: 2 microL of a microdrop containing 750 mg L(-1) Zn(II) in 1 mol L(-1) NaOH exposed to the headspace of a 20-mL aqueous sample stirred at 1600 rpm during 80 s after derivatization with 1 mL of 6 mol L(-1) HCl. An enrichment factor of 1710 was achieved in only 80 s. The calibration graph was linear in the range of 5-100 microg L(-1) with a detection limit of 0.5 microg L(-1). The repeatability, expressed as relative standard deviation, was 5.8% (N = 9). Finally, the proposed methodology was successfully applied to the determination of the acid labile sulfide fraction in different natural water samples.

Multiple small volume microwave-assisted digestions using conventional equipment for multielemental analysis of human breast biopsies by inductively coupled plasma optical emission spectrometry.

A multiple microwave-assisted digestion procedure using small PTFE closed vials (6 mL capacity) inserted into conventional microwave digestion vessels has been developed as a fast, efficient and clean methodology for multielemental analysis of human breast biopsies by inductively coupled plasma optical emission spectrometry. This small volume strategy allows drastically diminishing the volume of acid needed for digestion, and in turn, a decrease in sample dilution and an increase in sample throughput is achieved. A 2(IV)(4-1) fractional factorial design was used for screening optimization of four variables that can influence the digestion efficiency: (A) nitric acid volume, (B) pre-digestion step, (C) microwave power, and (D) digestion time. A validation study included linearity, precision, detection and quantification limits. Validation against different biological certified reference materials (CRMs) was also performed. The digestion method is suitable for the determination of Al, Ca, Cu, Fe, K, Mg, Mn, P, S and Zn in small size biological samples such as breast biopsies (<30 mg dry mass). Forty-seven biopsies from 39 women were analyzed: 20 samples from healthy women corresponding to mammoplasties and 27 samples from patients suffering from cancer pathology (19 corresponded to tumour and 8 to adjacent normal tissue). A significant accumulation of Al, Ca, Cu, K, Mg, Mn, P and Zn was found in tumour as compared to healthy tissues. When this comparison is made for tumour and adjacent tissues, a significant accumulation of Al, Mg, P and Zn in tumour tissues was observed. Finally, only Ca significantly accumulates in the adjacent tissues as compared to healthy tissues.

Multielemental determination in breast cancerous and non-cancerous biopsies by inductively coupled plasma-mass spectrometry following small volume microwave-assisted digestion.

A microwave-assisted digestion method amenable to analysis of small size biological samples (<30 mg dry mass) has been optimized for determining twelve elements (Ag, As, Cd, Co, Cu, Cr, Mn, Mo, Ni, Pb, Se and Zn) by inductively coupled plasma-mass spectrometry (ICP-MS) in breast cancerous and non-cancerous biopsies. The use of three small volume PTFE closed vials (6-mL capacity) placed inside a conventional microwave vessel allows to drastically diminishing the volume of acid needed for digestion. A Plackett-Burman experimental design was used to evaluate the robustness of the digestion procedure. Effects of nitric acid volume, need for predigestion step, microwave power and digestion time were assessed. No significant effects were found, the digestion method being robust enough to be recommended for a routine practice. The method was successfully validated against CRM BCR 185 (bovine liver), CRM NRCC TORT-2 (lobster hepatopancreas), CRM NRCC DORM-2 (dogfish muscle) and CRM NRCC DOLT-2 (dogfish liver). Procedural detection limits ranged from 0.54 to 40 ng g(-1). Within-batch precision values were less than 3%, whereas between-batch precision values were in the range 2-11%. Forty-seven biopsies from thirty-nine women were analyzed: 20 samples corresponding to mammoplasties from healthy women and 27 samples from patients suffering from cancer pathology, 19 of which corresponded to tumour and 8 to adjacent normal tissue. After applying parametric and non-parametric statistical tests, a significant accumulation of Cu, Mn, Zn and Se in cancerous tissues was demonstrated.

Improved microwave-assisted wet digestion procedures for accurate Se determination in fish and shellfish by flow injection-hydride generation-atomic absorption spectrometry.

Accurate determination of Se in biological samples, especially fish and shellfish, by hydride generation techniques has generally proven troublesome owing to the presence of organoselenium that cannot readily converted into inorganic selenium under usual oxidising conditions. Further improvements in the oxidation procedures are needed so as to obtain accurate concentration values when this type of samples is analyzed. Microwave-assisted wet digestion (MAWD) procedures of seafood based on HNO3 or the mixture HNO3/H2O2 and further thermal reduction of the Se(VI) formed to Se(IV) were evaluated. These procedures were as follows: (I) without H2O2 and without heating to dryness; (II) without H2O2 and with heating to dryness; (III) with H2O2 and without heating to dryness; (IV) with H2O2 and with heating to dryness. In general, low recoveries of selenium are obtained for several marine species (e.g., crustaceans and cephalopods), which may be ascribed to the presence of Se forms mainly associated with nonpolar proteins and lipids. Post-digestion UV irradiation proved very efficient since not only complete organoselenium decomposition was achieved but also the final step required for prereduction of Se(VI) into Se(IV) (i.e. heating at 90 degrees C for 30 min in 6M HCl) could be avoided. With the MAWD/UV procedure, the use of strong oxidising agents (persuphate, etc.) or acids (e.g. perchloric acid) which are typically applied prior to Se determination by hydride generation techniques is overcome, and as a result, sample pre-treatment is significantly simplified. The method was successfully validated against CRM DOLT-2 (dogfish liver), CRM DORM-2 (dogfish muscle) and CRM TORT-2 (lobster hepatopancreas). Automated ultrasonic slurry sampling with electrothermal atomic absorption spectrometry was also applied for comparison. Total Se contents in ten seafood samples were established. Se levels ranged from 0.7 to 2.9 microg g(-1).

Photolytic oxidation of As species for determination of total As (including the 'hidden' As fraction) in coastal seawater by hydride generation-atomic fluorescence spectrometry.

Ultraviolet irradiation (photolysis) in alkaline medium was applied for pretreatment of seawater samples so as to accurately determine total As by continuous-flow hydride generation-atomic fluorescence spectrometry. This sample pretreatment is meant to convert non-reducible As forms into inorganic As, which easily forms arsine. The optimised parameters were the treatment time and the pH of the medium. The behaviour of four hydride-reactive As species [As(III), As(V), MMA, DMA], and AsB, i.e. a typical non-hydride-reactive As species, when subjected to UV irradiation was studied. UV irradiation at pH 1 lead to conversion of all species into As(V) with the exception of AsB and DMA. Conversions of DMA and AsB into As(V) at pH 11 in less than 30min were observed under UV irradiation. The limit of detection of As (measured as As(V)) by hydride generation-atomic fluorescence spectrometry was 0.1microg/L and the repeatability of the oxidation procedure was about 10%. The method was applied to determination of total and directly reducible As at 11 sampling points of the Galician Coast (Atlantic Ocean, Spain). Total As concentrations were in the range 1.4-4.8microg/L. A significant As fraction, between 20 and 44%, depending on the sampling point, corresponded to non-reducible As which was converted by UV irradiation into hydride-reactive As. This fraction should represent the sum of DMA, which yields a low sensitivity in the continuous flow-AFS system, and the hidden As fraction.

Development of an ultrasound-assisted extraction method for biomonitoring of vanadium and nickel in the coastal environment under the influence of the Prestige fuel spill (North east Atlantic Ocean).

As a consequence of the Prestige shipwreck occurred in the Northeast Atlantic Ocean in November 2002, the need for establishing the environmental impact caused by metals has been of primary concern. Among the different metals contained in the fuel spill, V and Ni are particularly of interest since they appear at relatively high concentration in the original fuel. Biomonitoring of V and Ni using wild mussels (Mytilus edulis) collected along the Galician Coast (NW Iberian Peninsula) has been performed. Ultrasound-assisted extraction of V and Ni from dried mussel tissues using probe sonication allowed a fast solid-liquid extraction thus facilitating sample preparation from large sample batches used for biomonitoring. V and Ni were determined in shellfish caught in the Galician littoral and tar balls from the Prestige spill by electrothermal-atomic absorption spectrometry and inductively coupled plasma-optical emission spectrometry, respectively. A Plackett-Burman saturated design was applied for screening optimization of variables influencing the ultrasound-assisted extraction of V and Ni from shellfish. Efficient extraction of both metals was obtained from slurries prepared in 2 mL capacity sample vials (10 mg sample with a particle size less than 100 microm) using a 3% (v/v) HNO3 diluent and subjected to probe sonication (3 min; 30% vibrational amplitude of the probe). The method was successfully validated by means of three certified reference materials: NRCC-TORT-2 Lobster hepatopancreas, NIST-SRM 1566b Oyster tissue and NIST-SRM 2977 Mussel tissue. The detection limit (LOD) of V and Ni in the marine biological tissues, calculated according to the 3sigma criterion, were 0.24 microg g(-1) and 0.15 microg g(-1) for V and Ni, respectively. V and Ni concentrations in M. edulis were in the range 1.7-4.8 and 0.8-2.8 microg g(-1), respectively. Whilst no significant variations in Ni contents were observed in regard to reference values, an important increase in V concentration is observed at some sampling points, thereby indicating bioaccumulation.

Evaluation of distribution, mobility and binding behaviour of heavy metals in surficial sediments of Louro River (Galicia, Spain) using chemometric analysis: a case study.

Contents of total and extractable heavy metals, carbonates, MnO and Fe2O3, organic matter, and matrix components such as SiO2, Al2O3, CaO, Na2O, MgO, TiO2, K2O and P2O5 are used along with principal component analysis (PCA) for studying distribution, mobility and binding behaviour of Cd, Cr, Cu, Ni and Pb in the Louro River (Galicia, Spain). Eleven surficial sediment samples were taken along the beds of the river course. Total metal concentrations were obtained after microwave-assisted digestion whilst extractable metal contents were obtained following a three-stage sequential extraction scheme (i.e. soluble, reducible and oxidisable fractions). Loading plots of heavy metals bound to carbonates, Fe-Mn oxides, organic matter and aluminosilicates allowed determination of binding behaviour. Correlations found indicate that Pb and Cu are mainly discharged from urban wastes, whereas Cr and Ni are from electroplating and galvanizing industries. The occurrence of diffuse pollution sources along the river can account for the binding behaviour of Cd. Metal mobility decreased in the order: Cd > Pb > Cu > Ni > Cr. Despite total contents indicating moderate-to-high heavy metal pollution in this river, metals are mostly distributed in the residual fraction, hence showing a low risk of mobility.

Comparison of the standard SM&T sequential extraction method with small-scale ultrasound-assisted single extractions for metal partitioning in sediments.

A single extraction method based on the reagents employed in the SM&T (standards, measurement and testing programme) sequential extraction scheme for partitioning of Cd, Cr, Cu, Ni, and Pb in sediments has been developed. Small-scale extractions adapted to electrothermal atomic absorption spectrometric determinations (i.e. 25 mg mass in 1 mL extractant) have been used for the first time in conjunction with selective reagents using conventional operating conditions (i.e. conductive heating, magnetic stirring) or ultrasound-assisted extraction. Small-scale slurry preparations were implemented for determination of the residual/total metal content. The methodology developed enabled drastic reduction of extraction times, yielding extractable contents in accordance with those obtained by application of the conventional SM&T method, which can be regarded as a standard method. An important saving in the amount of sample and reagents is also achieved with small-scale extractions. Homogeneity of sediments at the mg level proved acceptable - precision was similar for between-batch and within-batch measurements. Method development was performed with CRM BCR 601 lake sediment for which extractable amounts of several metals are known. An application to a "real-world" sediment is also presented.

Chemical sequential extraction for metal partitioning in environmental solid samples.

A comprehensive review of the sequential extraction schemes for metal fractionation in environmental samples (ie., sediment, soil, sewage sludge, fly ash, etc.) is presented. The review contains more than 400 references and covers principally the literature published over the last decade. The use of each reagent involved in these schemes is looked at critically, and guidelines for their selectivity and extraction capacity are given. The operational character of these schemes is emphasised. Topics such as comparability between sequential extraction schemes of widespread use, harmonisation, acceleration, validation, etc. are addressed and future developments outlined.

Ultrasonic extraction followed by sonolysis-ozonolysis as a sample pretreatment method for determination of reactive arsenic toward sodium tetrahydroborate by flow injection-hydride generation AAS.

A new sample pretreatment method based on ultrasonic extraction in HCI medium and subsequent oxidation of the extracts by sonozone (i.e., sonolysis-ozonolysis) has been developed for determination of reactive arsenic toward sodium tetrahydroborate [mainly As(III) + As(V)] by flow injection-hydride generation atomic absorption spectrometry. This method avoids the use of intensive treatments with concentrated and corrosive acids, high pressures, and temperatures that are inherent with traditional wet or dry ashing procedures and entails reduced waste production and reagent consumption. A sonozone process at room temperature was optimized to break the bond of As to proteins and macromolecular constituents which was an essential requirement for effective reduction by L-cysteine prior to arsine generation. Spiking experiments showed that As(III), As(V), MMA, and DMA were fully recovered from several matrixes on applying the above treatment. On the other hand, a nonreducible As species such as arsenobetaine that is predominant in some biological samples remained unchanged. Application of the method to sediment, soil, fly ash, and plant CRMs demonstrated that, in general, a good agreement existed between certified and found As contents, thereby indicating the absence of nonreducible As forms. Low As recoveries were observed for fish CRMs, as a result of the nondegradability of arsenobetaine by sonozone. The detection limit of As in the samples investigated was in the range 0.19-2.8 microg g(-1).