RESUMO
In life cycle assessment (LCA), temporal considerations are usually lost during the life cycle inventory calculation, resulting in an aggregated "snapshot" of potential impacts. Disregarding such temporal considerations has previously been underlined as an important source of uncertainty, but a growing number of approaches have been developed to tackle this issue. Nevertheless, their adoption by LCA practitioners is still uncommon, which raises concerns about the representativeness of current LCA results. Furthermore, a lack of consistency can be observed in the used terms for discussions on temporal considerations. The purpose of this review is thus to search for common ground and to identify the current implementation challenges while also proposing development pathways. This paper introduces a glossary of the most frequently used terms related to temporal considerations in LCA to build a common understanding of key concepts and to facilitate discussions. A review is also performed on current solutions for temporal considerations in different LCA phases (goal and scope definition, life cycle inventory analysis and life cycle impact assessment), analysing each temporal consideration for its relevant conceptual developments in LCA and its level of operationalisation. We then present a potential stepwise approach and development pathways to address the current challenges of implementation for dynamic LCA (DLCA). Three key focal areas for integrating temporal considerations within the LCA framework are discussed: i) define the temporal scope over which temporal distributions of emissions are occurring, ii) use calendar-specific information to model systems and associated impacts, and iii) select the appropriate level of temporal resolution to describe the variations of flows and characterisation factors. Addressing more temporal considerations within a DLCA framework is expected to reduce uncertainties and increase the representativeness of results, but possible trade-offs between additional data collection efforts and the increased value of results from DLCAs should be kept in mind.
RESUMO
Innovative treatment technologies and management methods are necessary to valorise the constituents of wastewater, in particular nutrients from urine (highly concentrated and can have significant impacts related to artificial fertilizer production). The FP7 project, ValuefromUrine, proposed a new two-step process (called VFU) based on struvite precipitation and microbial electrolysis cell (MEC) to recover ammonia, which is further transformed into ammonium sulphate. The environmental and economic impacts of its prospective implementation in the Netherlands were evaluated based on life cycle assessment (LCA) methodology and operational costs. In order to tackle the lack of stable data from the pilot plant and the complex effects on wastewater treatment plant (WWTP), process simulation was coupled with LCA and costs assessment using the Python programming language. Additionally, particular attention was given to the propagation and analysis of inputs uncertainties. Five scenarios of VFU implementation were compared to the conventional treatment of 1 m3 of wastewater. Inventory data were obtained from SUMO software for the WWTP operation. LCA was based on Brightway2 software (using ecoinvent database and ReCiPe method). The results, based on 500 iterations sampled from inputs distributions (foreground parameters, ecoinvent background data and market prices), showed a significant advantage of VFU technology, both at a small and decentralized scale and at a large and centralized scale (95% confidence intervals not including zero values). The benefits mainly concern the production of fertilizers, the decreased efforts at the WWTP, the water savings from toilets flushing, as well as the lower infrastructure volumes if the WWTP is redesigned (in case of significant reduction of nutrients load in wastewater). The modelling approach, which could be applied to other case studies, improves the representativeness and the interpretation of results (e.g. complex relationships, global sensitivity analysis) but requires additional efforts (computing and engineering knowledge, longer calculation time). Finally, the sustainability assessment should be refined in the future with the development of the technology at larger scale to update these preliminary conclusions before its commercialization.
Assuntos
Meio Ambiente , Urina/química , Eliminação de Resíduos Líquidos/economia , Eliminação de Resíduos Líquidos/métodos , Custos e Análise de Custo , Eletrólise/métodos , Fertilizantes , Países Baixos , Estudos Prospectivos , Esgotos/química , Estruvita/química , Eliminação de Resíduos Líquidos/instrumentação , Águas Residuárias/química , Águas Residuárias/economiaRESUMO
The analysis of ecosystem services (ES) is becoming a key-factor to implement policies on sustainable technologies. Accordingly, life cycle impact assessment (LCIA) methods are more and more oriented toward the development of harmonized characterization models to address impacts on ES. However, such efforts are relatively recent and have not reached full consensus yet. We investigate here on the transdisciplinary pillars related to the modeling of LCIA on ES by conducting a critical review and comparison of the state-of-the-art in both LCIA and ES domains. We observe that current LCIA practices to assess impacts on "ES provision" suffer from incompleteness in modeling the cause-effect chains; the multifunctionality of ecosystems is omitted; and the "flow" nature of ES is not considered. Furthermore, ES modeling in LCIA is limited by its static calculation framework, and the valuation of ES also experiences some limitations. The conceptualization of land use (changes) as the main impact driver on ES, and the corresponding approaches to retrieve characterization factors, eventually embody several methodological shortcomings, such as the lack of time-dependency and interrelationships between elements in the cause-effect chains. We conclude that future LCIA modeling of ES could benefit from the harmonization with existing integrated multiscale dynamic integrated approaches.
Assuntos
Ecossistema , Meio Ambiente , Modelos Teóricos , Animais , HumanosRESUMO
The production of biogas from energy crops, organic waste and manure has augmented considerably the amounts of digestate available in Flanders. This has pushed authorities to steadily introduce legislative changes to promote its use as a fertilising agent. There is limited arable land in Flanders, which entails that digestate has to compete with animal manure to be spread. This forces many anaerobic digestion plants to further treat digestate in such a way that it can either be exported or the nitrogen be removed. Nevertheless, the environmental impact of these treatment options is still widely unknown, as well as the influence of these impacts on the sustainability of Flemish anaerobic digestion plants in comparison to other regions where spreading of raw digestate is allowed. Despite important economic aspects that must be considered, the use of Life Cycle Assessment (LCA) is suggested in this study to identify the environmental impacts of spreading digestate directly as compared to four different treatment technologies. Results suggest relevant environmental gains when the digestate mix is treated using the examined conversion technologies prior to spreading, although important trade-offs between impact categories were observed and discussed. The promising results of digestate conversion technologies suggest that further LCA analyses should be performed to delve into, for instance, the appropriateness to shift to nutrient recovery technologies rather than digestate conversion treatments.
Assuntos
Meio Ambiente , Esterco , Eliminação de Resíduos/métodos , Amônia/química , Bélgica , Biocombustíveis , Mudança Climática , Eutrofização , Osmose , Ozônio , Solo , Tecnologia/métodosRESUMO
Toxicity characterization of chemical emissions in Life Cycle Assessment (LCA) is a complex task which usually proceeds via multimedia (fate, exposure and effect) models attached to models of dose-response relationships to assess the effects on target. Different models and approaches do exist, but all require a vast amount of data on the properties of the chemical compounds being assessed, which are hard to collect or hardly publicly available (especially for thousands of less common or newly developed chemicals), therefore hampering in practice the assessment in LCA. An example is USEtox, a consensual model for the characterization of human toxicity and freshwater ecotoxicity. This paper places itself in a line of research aiming at providing a methodology to reduce the number of input parameters necessary to run multimedia fate models, focusing in particular to the application of the USEtox toxicity model. By focusing on USEtox, in this paper two main goals are pursued: 1) performing an extensive exploratory analysis (using dimensionality reduction techniques) of the input space constituted by the substance-specific properties at the aim of detecting particular patterns in the data manifold and estimating the dimension of the subspace in which the data manifold actually lies; and 2) exploring the application of a set of linear models, based on partial least squares (PLS) regression, as well as a nonlinear model (general regression neural network--GRNN) in the seek for an automatic selection strategy of the most informative variables according to the modelled output (USEtox factor). After extensive analysis, the intrinsic dimension of the input manifold has been identified between three and four. The variables selected as most informative may vary according to the output modelled and the model used, but for the toxicity factors modelled in this paper the input variables selected as most informative are coherent with prior expectations based on scientific knowledge of toxicity factors modelling. Thus the outcomes of the analysis are promising for the future application of the approach to other portions of the model, affected by important data gaps, e.g., to the calculation of human health effect factors.
Assuntos
Poluentes Ambientais/toxicidade , Aprendizado de Máquina , Compostos Orgânicos/toxicidade , Humanos , Modelos Lineares , Dinâmica não LinearRESUMO
This article presents agent-based modeling (ABM) as a novel approach for consequential life cycle assessment (C-LCA) of large scale policies, more specifically mobility-related policies. The approach is validated at the Luxembourgish level (as a first case study). The agent-based model simulates the car market (sales, use, and dismantling) of the population of users in the period 2013-2020, following the implementation of different mobility policies and available electric vehicles. The resulting changes in the car fleet composition as well as the hourly uses of the vehicles are then used to derive consistent LCA results, representing the consequences of the policies. Policies will have significant environmental consequences: when using ReCiPe2008, we observe a decrease of global warming, fossil depletion, acidification, ozone depletion, and photochemical ozone formation and an increase of metal depletion, ionizing radiations, marine eutrophication, and particulate matter formation. The study clearly shows that the extrapolation of LCA results for the circulating fleet at national scale following the introduction of the policies from the LCAs of single vehicles by simple up-scaling (using hypothetical deployment scenarios) would be flawed. The inventory has to be directly conducted at full scale and to this aim, ABM is indeed a promising approach, as it allows identifying and quantifying emerging effects while modeling the Life Cycle Inventory of vehicles at microscale through the concept of agents.
Assuntos
Automóveis , Modelos Teóricos , Comércio , Meio Ambiente , Política PúblicaRESUMO
The Kyoto protocol has established an accounting system for national greenhouse gas (GHG) emissions according to a geographic criterion (producer perspective), such as that proposed by the IPCC guidelines for national GHG inventories. However, the representativeness of this approach is still being debated, because the role of final consumers (consumer perspective) is not considered in the emission allocation system. This paper explores the usefulness of a hybrid analysis, including input-output (IO) and process inventory data, as a complementary tool for estimating and allocating national GHG emissions according to both consumer- and producer-based perspectives. We assess the historical GHG impact profile (from 1995 to 2009) of Luxembourg, which is taken as a case study. The country's net consumption over time is estimated to generate about 28,700 Gg CO2e/year on average. Compared to the conventional IPCC inventory, the IO-based framework typically shows much higher emission estimations. This relevant discrepancy is mainly due to the different points of view obtained from the hybrid model, in particular with regard to the contribution of imported goods and services. Detailing the GHG inventory by economic activity and considering a wider system boundary make the hybrid IO method advantageous as compared to the IPCC approach, but its effective implementation is still limited by the relatively complex modeling system, as well as the lack of coordination and scarce availability of datasets at the national level.
Assuntos
Poluição do Ar/estatística & dados numéricos , Poluentes Atmosféricos/análise , Dióxido de Carbono/análise , Comportamento do Consumidor , Monitoramento Ambiental , Efeito Estufa , Luxemburgo , Metano/análiseRESUMO
Because of the more and more stringent regulations and customer demand, dishwasher detergent manufacturers are constantly improving the composition of the products towards better environmental performances. In order to quantify the pros and cons of these changes on the lifecycle of detergents, as compared to conventional products, the use of Life Cycle Assessment (LCA) is a meaningful opportunity. However, the application of the methodology is hampered by the lack of Characterisation Factors (CFs) relative to the specific chemical substances included in the detergents composition, which cannot be included in the impact assessment of the effluent discharge. In this study we have tackled this problem, taking advantage of the specific case of three dishwasher detergents produced by the Chemolux/McBride group: phosphate-based, eco-labelled and phosphate-free formulations. Nine CFs for freshwater ecotoxicity and seven CFs for human toxicity have been developed, using the USEtox methodology and data made available under the REACH regulation. As a result, the dishwasher effluent composition could be characterised by more than 95% for freshwater ecotoxicity whereas for human toxicity the percentage was less than 36%, due to the lack of adequate and reliable repeated dose toxicity studies. The main contributing substances to freshwater ecotoxicity were found to be sodium percarbonate and sodium triphosphate, the latter confirming the pertinence of phosphates banning in the detergent industry. Regarding human toxicity, zinc shows the highest contribution. Further comparison to previous studies and sensitivity analysis substantiated the robustness of these conclusions.
Assuntos
Detergentes/química , Detergentes/toxicidade , Ecotoxicologia/métodos , Controle Social Formal , Poluentes Químicos da Água/toxicidade , Química Farmacêutica , Europa (Continente) , Humanos , Estágios do Ciclo de Vida/efeitos dos fármacos , Modelos Teóricos , Fosfatos/química , Fosfatos/isolamento & purificação , Fosfatos/toxicidade , Poluentes Químicos da Água/químicaRESUMO
Despite the increasing awareness of our dependence on Ecosystem Services (ES), Life Cycle Impact Assessment (LCIA) does not explicitly and fully assess the damages caused by human activities on ES generation. Recent improvements in LCIA focus on specific cause-effect chains, mainly related to land use changes, leading to Characterization Factors (CFs) at the midpoint assessment level. However, despite the complexity and temporal dynamics of ES, current LCIA approaches consider the environmental mechanisms underneath ES to be independent from each other and devoid of dynamic character, leading to constant CFs whose representativeness is debatable. This paper takes a step forward and is aimed at demonstrating the feasibility of using an integrated earth system dynamic modeling perspective to retrieve time- and scenario-dependent CFs that consider the complex interlinkages between natural processes delivering ES. The GUMBO (Global Unified Metamodel of the Biosphere) model is used to quantify changes in ES production in physical terms - leading to midpoint CFs - and changes in human welfare indicators, which are considered here as endpoint CFs. The interpretation of the obtained results highlights the key methodological challenges to be solved to consider this approach as a robust alternative to the mainstream rationale currently adopted in LCIA. Further research should focus on increasing the granularity of environmental interventions in the modeling tools to match current standards in LCA and on adapting the conceptual approach to a spatially-explicit integrated model.
Assuntos
Conservação dos Recursos Naturais , Monitoramento Ambiental/métodos , Modelos Teóricos , Planeta Terra , EcossistemaRESUMO
Scarcity of natural resources and productive land is a global issue affecting the provision of goods and services at the country scale. This is particularly true for small regions with highly developed economies such as Luxembourg, which usually balance the chronic unavailability of resources (in particular with regard to fossil fuels) with an increasing demand of imported raw materials, energy and manufactured commodities. Based on historical time-series analysis (from 1995 to 2009), this paper determines the state of natural capital (NC) utilization in Luxembourg and estimates its ecological deficit (ED). Accordingly, solar energy demand (SED) and ecological footprint (EF) for Luxembourg have been initially calculated based on a recently developed country-specific environmentally extended input-output model. Thereafter, these indicators have been compared to the corresponding annual trends of potential NC (estimated using the emergy concept) and biocapacity, respectively. Results show that the trends in ED and in the use of NC in Luxembourg have not increased substantially during the years surveyed. However, the estimates also highlight that the NC of Luxembourg is directly and indirectly overused by a factor higher than 20, while circa 9 additional 'Luxembourg states' would be ideally necessary to satisfy the current land's requirements of the country and thus balance the impact induced by the EF. An in-depth analysis of the methodological advantages and limitations behind our modelling approach has been performed to validate our findings and propose a road map to improve the environmental accounting for NC and biocapacity in Luxembourg.
Assuntos
Conservação dos Recursos Naturais/métodos , Ecossistema , Meio Ambiente , Modelos Econômicos , Energia Solar/estatística & dados numéricos , História do Século XX , História do Século XXI , Luxemburgo , Energia Solar/economia , Energia Solar/históriaRESUMO
Luxembourg aims at complying with the EU objective of attaining a 14% use of bioenergy in the national grid by 2020. The increase of biomethane production from energy crops could be a valuable option in achieving this objective. However, the overall environmental benefit of such option is yet to be proven. Consequential Life Cycle Assessment (CLCA) has shown to be a useful tool to evaluate the environmental suitability of future energy scenarios and policies. The objective of this study was, therefore, to evaluate the environmental consequences of modifying the Luxembourgish agricultural system to increase maize production for biomethane generation. A total of 10 different scenarios were modelled using a partial equilibrium (PE) model to identify changes in land cultivation based on farmers' revenue maximisation, which were then compared to the baseline scenario, i.e. the state of the agricultural sector in 2009. The results were divided into three different consequential decision contexts, presenting differing patterns in terms of land use changes (LUCs) but with minor shifts in environmental impacts. Nevertheless, energy from maize production would imply substantially higher environmental impacts when compared with the current use of natural gas, mainly due to increases in climate change and agricultural land occupation impacts. The results are discussed based on the consequences they may generate on the bioenergy policy, the management of arable land, the changes in import-export flows in Luxembourg and LUCs in the domestic agricultural system. In addition, the specific PE+LCA method presented intends to be of use for other regional studies in which a high level of site-specific data is available.
Assuntos
Biocombustíveis , Conservação de Recursos Energéticos/métodos , Política Ambiental , Agricultura , Monitoramento Ambiental/métodos , Luxemburgo , UrbanizaçãoRESUMO
This paper reports the emergy-based evaluation (EME) of the ecological performance of four water treatment plants (WTPs) using three different approaches. The results obtained using the emergy calculation software SCALE (EMESCALE) are compared with those achieved through a conventional emergy evaluation procedure (EMECONV), as well as through the application of the Solar Energy Demand (SED) method. SCALE's results are based on a detailed representation of the chain of technological processes provided by the lifecycle inventory database ecoinvent®. They benefit from a higher level of details in the description of the technological network as compared to the ones calculated with a conventional EME and, unlike the SED results, are computed according to the emergy algebra rules. The analysis delves into the quantitative comparison of unit emergy values (UEVs) for individual technospheric inputs provided by each method, demonstrating the added value of SCALE to enhance reproducibility, accurateness and completeness of an EME. However, SCALE cannot presently include non-technospheric inputs in emergy accounting, like e.g. human labor and ecosystem services. Moreover, SCALE is limited by the approach used to build the dataset of UEVs for natural resources. Recommendations on the scope and accuracy of SCALE-based emergy accounting are suggested for further steps in software development, as well as preliminary quantitative methods to account for ecosystem services and human labor.
Assuntos
Software , Eliminação de Resíduos Líquidos/métodos , Conservação dos Recursos Naturais , Ecologia , Ecossistema , Monitoramento Ambiental/métodosRESUMO
Pharmaceuticals are normally barely removed by conventional wastewater treatments. Advanced technologies as a post-treatment, could prevent these pollutants reaching the environment and could be included in a centralized treatment plant or, alternatively, at the primary point source, e.g. hospitals. In this study, the environmental impacts of different options, as a function of several advanced treatments as well as the centralized/decentralized implementation options, have been evaluated using Life Cycle Assessment (LCA) methodology. In previous publications, the characterization of the toxicity of pharmaceuticals within LCA suffers from high uncertainties. In our study, LCA was therefore only used to quantify the generated impacts (electricity, chemicals, etc.) of different treatment scenarios. These impacts are then weighted by the average removal rate of pharmaceuticals using a new Eco-efficiency Indicator EFI. This new way of comparing the scenarios shows significant advantages of upgrading a centralized plant with ozonation as the post-treatment. The decentralized treatment option reveals no significant improvement on the avoided environmental impact, due to the comparatively small pollutant load coming from the hospital and the uncertainties in the average removal of the decentralized scenarios. When comparing the post-treatment technologies, UV radiation has a lower performance than both ozonation and activated carbon adsorption.
Assuntos
Meio Ambiente , Preparações Farmacêuticas/isolamento & purificação , Águas Residuárias/química , Poluentes Químicos da Água/isolamento & purificação , Purificação da Água/métodos , Intervalos de ConfiançaRESUMO
To compare potable water production plants on the basis of the environmental impacts generated by the treatment, including water resource depletion, Life Cycle Assessment (LCA) methodology is often used as referential. A comparison based only on the environmental impacts can however be misleading. Criteria for drinkability are usually defined as thresholds and the actual water quality gain achieved by different treatment chains shall be considered in the assessment for a fair comparison. Otherwise, chains treating low quality water resources could be disadvantaged as compared to alternatives using higher quality water resource, also when the depletion of the raw resource is included in the impact assessment. In this study, a novel Cost-Performance (CP) indicator has been developed and tested for the case of two existing water treatment plants located in the Paris Region. CP is the ratio between the total environmental impact generated by the treatment (i.e. the LCA score, eventually monetarised) and the total quality gain from raw to treated water. For the test case, three life cycle impact assessment methods, ReCiPe, Stepwise and Eco-costs (the latter two including monetarisation) have been considered. The water quality gain is based on 8 relevant parameters measured before and after treatment. The parameters are further aggregated using the French water quality valuation system SEQ-Eau. Paired t-test is then used to calculate the confidence interval for the average quality gain which then determines the confidence interval of the CP. Independent t-test on the CPs of the two alternative plants allows checking if their performances can be distinguished. Although in the specific test case the comparison is not conclusive, due to the similarity between the water quality gains, realistic breakthrough values have been obtained, especially using ReCiPe. The meaningfulness of the monetarisation of the LCA results has been highlighted as well.
RESUMO
After ingestion, pharmaceuticals are excreted unchanged or metabolized. They subsequently arrive in conventional wastewater treatment plants and are then released into the environment, often without undergoing any degradation. Conventional treatment plants can be upgraded with post treatment, alternatively the removal of pharmaceuticals could be achieved directly at point sources. In the European project PILLS, several solutions for decentralized treatment of pharmaceuticals at hospitals were investigated at both pilot plant and full scale, and were then compared to conventional and upgraded centralized treatment plants using Life Cycle Assessment (LCA). Within the scope of the study, pharmaceuticals were found to have a comparatively minor environmental impact. As a consequence, an additional post treatment does not provide significant benefits. In the comparison of post treatment technologies, ozonation and activated carbon performed better than UV. These results suffer however from high uncertainties due to the assessment models of the toxicity of pharmaceuticals in LCA. Our results should therefore be interpreted with caution. LCA is a holistic approach and does not cover effects or issues on a local level, which may be highly relevant. We should therefore apply the precautionary ALARA principle (As Low As Reasonably Achievable) and not conclude that the effect of pharmaceuticals is negligible in the environment.
Assuntos
Meio Ambiente , Hospitais , Preparações Farmacêuticas/química , Eliminação de Resíduos Líquidos/métodos , Águas Residuárias/química , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Modelos Teóricos , Preparações Farmacêuticas/isolamento & purificaçãoRESUMO
Life Cycle Assessment (LCA) is a widely recognized, multicriteria and standardized tool for environmental assessment of products and processes. As an independent evaluation method, emergy assessment has shown to be a promising and relatively novel tool. The technique has gained wide recognition in the past decade but still faces methodological difficulties which prevent it from being accepted by a broader stakeholder community. This review aims to elucidate the fundamental requirements to possibly improve the Emergy evaluation by using LCA. Despite its capability to compare the amount of resources embodied in production systems, Emergy suffers from its vague accounting procedures and lacks accuracy, reproducibility, and completeness. An improvement of Emergy evaluations can be achieved via (1) technical implementation of Emergy algebra in the Life Cycle Inventory (LCI); (2) selection of consistent Unit Emergy Values (UEVs) as characterization factors for Life Cycle Impact Assessment (LCIA); and (3) expansion of the LCI system boundaries to include supporting systems usually considered by Emergy but excluded in LCA (e.g., ecosystem services and human labor). Whereas Emergy rules must be adapted to life-cycle structures, LCA should enlarge its inventory to give Emergy a broader computational framework. The matrix inversion principle used for LCAs is also proposed as an alternative to consistently account for a large number of resource UEVs.
Assuntos
Algoritmos , Meio Ambiente , TermodinâmicaRESUMO
Oriented strand boards (OSBs) are wood panels that are used worldwide mainly in the packaging and the building sectors. Their market share is rapidly increasing thanks to their outstanding mechanical properties and to a renewed interest for wood based products. The OSB production process generates, nonetheless, emissions of volatile organic compounds (VOCs) during the air-drying of wood strands. This known problem in the literature leads to an odorous nuisance in the surrounding area of the production site. In order to address this problem, a novel application to wood drying of an innovative vapor drying technology is successfully operated at the production site of Kronospan Luxembourg S.A. In addition to the reduced odorous nuisance, a significant environmental added value is expected because of the other modifications induced by the vapor-drying technique on the OSB production process viz. the reduced energy and raw materials demands and the change of adhesive mixture, with the addition of phenol resin. The potential impact of this technology on the OSB market is therefore very significant. This study was aimed at assessing the environmental added value provided by the vapor-drying technique through a life cycle assessment (LCA) according to ISO 14040-44 standards. The objective was to compare the environmental performances of the former and the current OSB production processes. Considering only the pollutant emissions from the OSB production process, the reduction of climate change impact and human health damage is significant respectively, 15-20% and 50-75%. When the lifecycle processes related to the OSB production are included, the reduction of damages does not exceed 3-7%. Following an uncertainty analysis,this reduction was nevertheless proven to be statistically significant. However, it is observed that the reduction of environmental impacts and damages allowed by the vapor-drying technology is counterbalanced by the change of adhesive mixture. Indeed the new adhesive mixture generates higher environmental damages than the former mixture because of the higher energy and raw material demand from phenol resin production. These results show the need to move from an approach focused on a single process innovation (the vapor-drying technique) to a more general and systemic approach combining process and product ecodesign. Such approaches are needed in order to effectively improve the overall environmental performance of a production system, without transfer of pollution along the lifecycle or offsets of pollution credits. LCA is definitively one of the most pertinent tools to identify improvement opportunities in the comparison of alternative designs from an environmental perspective.
Assuntos
Materiais de Construção/normas , Madeira/química , Ar , Poluentes Atmosféricos/análise , Ecologia/métodos , Elasticidade , Meio Ambiente , Monitoramento Ambiental/métodos , Formaldeído/química , Teste de Materiais , Odorantes , Compostos Orgânicos Voláteis/análise , Gerenciamento de Resíduos , ResíduosRESUMO
Ecological sanitation (EcoSan) concepts, relying on an environmentally sound management of water, nutrient and energy fluxes, have been poorly characterized in literature and are widely ignored by public planning authorities, architects or engineers. A comparative life cycle assessment (LCA) of an EcoSan system at an office building and of conventional systems was carried out in order to provide practical data and information to (partially) fill this gap. Compared to conventional systems, EcoSan can reduce the contribution to ecosystem quality damage by more than 60%. EcoSan leads, however, to higher damages on resources and human health and higher impact on climate change. Key improvement possibilities and research needs related to these results are discussed throughout the paper. Ecological sanitation appears to be a promising alternative to small-scale wastewater treatment. At higher scales, low water consumption conventional systems are better performing and are not likely to be replaced by EcoSan systems in the short term. Standard conventional systems have very poor environmental performances and should be upgraded as far as possible.