Trimers, dimers of trimers, and trimers of trimers are common building blocks of annexin a5 two-dimensional crystals.

Annexin A5 is a member of a family of homologous proteins sharing the ability to bind to negatively charged phospholipid membranes in a Ca(2+)-dependent manner. Annexin A5, as well as other annexins, self-assembles into two-dimensional (2D) ordered arrays upon binding to membranes, a property that has been proposed to have functional implications. Electron microscopy and atomic force microscopy experiments have revealed that annexin A5 forms two types of 2D crystals-with either p6 or p3 symmetry-that are both based on annexin trimers. In this study, we describe three other crystal forms that coexist with the p6 crystals. All crystal forms are made of the same building blocks, namely, dimers of trimers and trimers of trimers. A mechanistic model of the formation of the annexin A5 2D crystals is proposed.

Phosphorylation mutants elucidate the mechanism of annexin IV-mediated membrane aggregation.

Site-directed mutagenesis, electron microscopy, and X-ray crystallography were used to probe the structural basis of annexin IV-induced membrane aggregation and the inhibition of this property by protein kinase C phosphorylation. Site-directed mutants that either mimic (Thr6Asp, T6D) or prevent (Thr6Ala, T6A) phosphorylation of threonine 6 were produced for these studies and compared with wild-type annexin IV. In vitro assays showed that unmodified wild-type annexin IV and the T6A mutant, but not PKC-phosphorylated wild-type or the T6D mutant, promote vesicle aggregation. Electron crystallographic data of wild-type and T6D annexin IV revealed that, similar to annexin V, the annexin IV proteins form 2D trimer-based ordered arrays on phospholipid monolayers. Cryo-electron microscopic images of junctions formed between lipid vesicles in the presence of wild-type annexin IV indicated a separation distance corresponding to the thickness of two layers of membrane-bound annexin IV. In this orientation, a single layer of WT annexin IV, attached to the outer leaflet of one vesicle, would undergo face-to-face self-association with the annexin layer of a second vesicle. The 2.0-A resolution crystal structure of the T6D mutant showed that the mutation causes release of the N-terminal tail from the protein core. This change would preclude the face-to-face annexin self-association required to aggregate vesicles. The data suggest that reversible complex formation through phosphorylation and dephosphorylation could occur in vivo and play a role in the regulation of vesicle trafficking following changes in physiological states.

Structure of membrane-bound annexin A5 trimers: a hybrid cryo-EM - X-ray crystallography study.

Annexins constitute a family of phospholipid- and Ca(2+)-binding proteins involved in a variety of membrane-related processes. The property of several annexins, including annexin A5, to self-organize at the surface of lipid membranes into 2D ordered arrays has been proposed to be functionally relevant in cellular contexts. To further address this question, we investigated the high-resolution structure of annexin A5 trimers in membrane-bound 2D crystals by cryo-electron microscopy (Cryo-EM). A new 2D crystal form was discovered, with p32(1) symmetry, which is significantly better ordered than the 2D crystals reported before. A 2D projection map was obtained at 6.5 A resolution, revealing protein densities within each of the four domains characteristic of annexins. A quantitative comparison was performed between this structure and models generated from the structure of the soluble form of annexin A5 in pseudo-R3 3D crystals. This analysis indicated that both structures are essentially identical, except for small local changes attributed to membrane binding. As a consequence, and contrary to the common view, annexin A5 molecules maintain their bent shape and do not flatten upon membrane binding, which implies either that the four putative Ca(2+) and membrane-binding loops present different types of interaction with the membrane surface, or that the membrane surface is locally perturbed. We propose that the trimerization of annexin A5 molecules is the relevant structural change occurring upon membrane binding. The evidence that 2D arrays of annexin A5 trimers are responsible for its in vitro property of blood coagulation inhibition supports this conclusion.

Surface topography of the p3 and p6 annexin V crystal forms determined by atomic force microscopy.

Annexin V is a member of a family of structurally homologous proteins sharing the ability to bind to negatively charged phospholipid membranes in a Ca(2+)-dependent manner. The structure of the soluble form of annexin V has been solved by X-ray crystallography, while electron crystallography of two-dimensional (2D) crystals has been used to reveal the structure of its membrane-bound form. Two 2D crystal forms of annexin V have been reported to date, with either p6 or p3 symmetry. Atomic force microscopy has previously been used to investigate the growth and the topography of the p6 crystal form on supported phospholipid bilayers (Reviakine et al., 1998). The surface structure of the second crystal form, p3, is presented in this study, along with an improved topographic map of the p6 crystal form. The observed topography is correlated with the structure determined by X-ray crystallography.

Synchrotron radiation diffraction from two-dimensional protein crystals at the air/water interface.

Protein structure determination by classical x-ray crystallography requires three-dimensional crystals that are difficult to obtain for most proteins and especially for membrane proteins. An alternative is to grow two-dimensional (2D) crystals by adsorbing proteins to ligand-lipid monolayers at the surface of water. This confined geometry requires only small amounts of material and offers numerous advantages: self-assembly and ordering over micrometer scales is easier to obtain in two dimensions; although fully hydrated, the crystals are sufficiently rigid to be investigated by various techniques, such as electron crystallography or micromechanical measurements. Here we report structural studies, using grazing incidence synchrotron x-ray diffraction, of three different 2D protein crystals at the air-water interface, namely streptavidine, annexin V, and the transcription factor HupR. Using a set-up of high angular resolution, we observe narrow Bragg reflections showing long-range crystalline order in two dimensions. In the case of streptavidin the angular range of the observed diffraction corresponds to a resolution of 10 A in plane and 14 A normal to the plane. We show that this approach is complementary to electron crystallography but without the need for transfer of the monolayer onto a grid. Moreover, as the 2D crystals are accessible from the buffer solution, the formation and structure of protein complexes can be investigated in situ.

Cellular uptake of Clostridium botulinum C2 toxin requires oligomerization and acidification.

The actin-ADP-ribosylating binary Clostridium botulinum C2 toxin consists of two individual proteins, the binding/translocation component C2II and the enzyme component C2I. To elicit its cytotoxic action, C2II binds to a receptor on the cell surface and mediates cell entry of C2I via receptor-mediated endocytosis. Here we report that binding of C2II to the surface of target cells requires cleavage of C2II by trypsin. Trypsin cleavage causes oligomerization of the activated C2II (C2IIa) to give SDS-stable heptameric structures, which exhibit a characteristic annular or horseshoe shape and form channels in lipid bilayer membranes. Cytosolic delivery of the enzyme component C2I is blocked by bafilomycin but not by brefeldin A or nocodazole, indicating uptake from an endosomal compartment and requirement of endosomal acidification for cell entry. In the presence of C2IIa and C2I, short term acidification of the extracellular medium (pH 5.4) allows C2I to enter the cytosol directly. Our data indicate that entry of C2 toxin into cells involves (i) activation of C2II by trypsin-cleavage, (ii) oligomerization of cleaved C2IIa to heptamers, (iii) binding of the C2IIa oligomers to the carbohydrate receptor on the cell surface and assembly with C2I, (iv) receptor-mediated endocytosis of both C2 components into endosomes, and finally (v) translocation and release of C2I into the cytosol after acidification of the endosomal compartment.

Growth of Protein 2-D Crystals on Supported Planar Lipid Bilayers Imaged in Situ by AFM.

Theories of crystallization, both in 3-D and 2-D, are still very limited, mainly due to the scarcity of experimental approaches providing pertinent data on elementary phenomena. We present here a novel experimental approach for following, in real time and in situ, the process of 2-D crystallization of proteins on solid supports. Using annexin V as a model of a protein binding by affinity to a lipid matrix, we show that 2-D crystals of proteins can be formed on supported planar lipid bilayers (SPBs). Atomic Force Microscopy (AFM) enables the process of 2-D crystal growth to be visualized. The submolecular organization of the crystals was characterized at a resolution of approximately 2 nanometers, and defects, hitherto not observed in protein crystals, were resolved. These results have potential applications in basic and applied sciences. Copyright 1998 Academic Press.

The 1.5-nm projection structure of HeLa cell prosome-MCP (proteasome) provided by two-dimensional crystals.

We grew two-dimensional crystals of HeLa cell prosomes, also called multicatalytic proteinases (MCP) and proteasomes, for a structure determination by electron microscopy. The molecules were arranged in side views in these crystals. The crystals have p21 plane group symmetry with one particle per unit cell. This symmetry confirms previously published evidence indicating that eukaryotic prosome-MCPs are dimers of two identical halves. Structure factors from six crystals each comprising more than 1000 unit cells were combined to generate a 1.5-nm projection map. We discovered that while the general cylindrical shape of HeLa prosome-MCPs resembles the shape of the archaebacterial Thermoplasma acidophilum proteasomes, the internal structure differs significantly. We propose that because of different subunit composition, the architecture of HeLa prosome-MCPs differs from the basic architecture of related particles previously reported.

Structure and RNA content of the prosomes.

Duck erythroblasts prosomes were analysed by small angle neutron scattering (SANS), dynamic light scattering and (cryo-)electron microscopy. A molecular weight of approximately 720,000 +/- 50,000, a radius of gyration of 64 +/- 2 A and a hydrodynamic radius of approximately 86 A were obtained. Electron micrographs show a hollow cylinder-like particle with a diameter of 120 A, a height of 170 A and a diameter of 40 A for the cavity, built of four discs, the two outer ones being more pronounced than those in the center. Results from SANS indicate less then 5% of RNA in the purified prosomes, but nuclease protection assays confirm its presence.