Validation of large-scale, monochromatic UV disinfection systems for drinking water using dyed microspheres.

Dyed microspheres have been developed as a new method for validation of ultraviolet (UV) reactor systems. When properly applied, dyed microspheres allow measurement of the UV dose distribution delivered by a photochemical reactor for a given operating condition. Prior to this research, dyed microspheres had only been applied to a bench-scale UV reactor. The goal of this research was to extend the application of dyed microspheres to large-scale reactors. Dyed microsphere tests were conducted on two prototype large-scale UV reactors at the UV Validation and Research Center of New York (UV Center) in Johnstown, NY. All microsphere tests were conducted under conditions that had been used previously in biodosimetry experiments involving two challenge bacteriophage: MS2 and Qbeta. Numerical simulations based on computational fluid dynamics and irradiance field modeling were also performed for the same set of operating conditions used in the microspheres assays. Microsphere tests on the first reactor illustrated difficulties in sample collection and discrimination of microspheres against ambient particles. Changes in sample collection and work-up were implemented in tests conducted on the second reactor that allowed for improvements in microsphere capture and discrimination against the background. Under these conditions, estimates of the UV dose distribution from the microspheres assay were consistent with numerical simulations and the results of biodosimetry, using both challenge organisms. The combined application of dyed microspheres, biodosimetry, and numerical simulation offers the potential to provide a more in-depth description of reactor performance than any of these methods individually, or in combination. This approach also has the potential to substantially reduce uncertainties in reactor validation, thereby leading to better understanding of reactor performance, improvements in reactor design, and decreases in reactor capital and operating costs.

Conformations of nucleoside analogue 1-(2'-deoxy-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxamide in different DNA sequence contexts.

The concept of using a dynamic base-pairing nucleobase as a mode for degenerate recognition presents a unique challenge to analysis of DNA structure. Proton and phosphorus NMR studies are reported for two nine-residue DNA oligodeoxyribonucleotides, d(CATGGGTAC).d(GTACNCATG) (1) and d(CATGTGTAC).(GTACNCATG) (2), which contained 1-(2'-deoxy-beta-D-ribofuranosyl)-1,2,4-triazole-3-carboxamide (N) in the center of the helix at position 14. The duplexes were compared to the canonical Watson-Crick duplexes, d(CATGGGTAC).d(GTACCCATG) (3) and d(CATGTGTAC).d(GTACACATG) (4). Two-dimensional NOESY spectra of 1-4 in H(2)O and D(2)O solutions collected at 5 degrees C allowed assignment of the exchangeable and nonexchangeable protons for all four oligodeoxyribonucleotides. Thermodynamic and circular dichroism data indicated that 1-4 formed stable, B-form duplexes at 5 degrees C. Two-dimensional (1)H-(31)P correlation spectra indicated that there were minor perturbations in the backbone only near the site of the triazole base. Strong NOESY cross-peaks were observed between the H5 and H1' of N14 in 1 and, unexpectedly, 2, which indicated that, in both duplexes, N14 was in the syn(chi)() conformation about the glycosidic bond. NOESY spectra of 1 and 2 recorded in 95% H(2)O, 5% D(2)O indicated that the imino proton of the base opposite N14, G5, or T5, formed a weak hydrogen bond with N14. These conformations place the polar carboxamide functional group in the major groove with motional averaging on the intermediate time scale.

Peptide nucleic acid-DNA duplexes containing the universal base 3-nitropyrrole.

A peptide nucleic acid (PNA) monomer containing the universal base 3-nitropyrrole was synthesized by coupling 1-carboxymethyl-3-nitropyrrole to ethyl N-[2-(tert-butoxycarbonylamino)ethyl]glycinate. The PNA sequence H-TGTACGTXACAACTA-NH2 (X = 3-nitropyrrole and C) and DNA sequence 5'-TGTACGTXACAACTA-3' were synthesized and thermal melting studies with the complementary DNA sequence 5'-TAGTTGTYACGTACA-3' (Y = A,C, G, T) compared. The T(m) data show that 3-nitropyrrole pairs indiscriminately with all four natural nucleobases as a constituent of either DNA or PNA. However, 3-nitropyrrole-containing PNA-DNA (average T(m) value = 51.1 degrees C) is significantly more thermally stable than 3-nitropyrrole-containing DNA-DNA (average T(m) value = 39.6 degrees C). From circular dichroism measurements, it is apparent that 3-nitropyrrole in the PNA strand causes a significant change in duplex structure.

Characteristics of nucleic acids.

This appendix is a compilation of information from Current Protocols in Molecular Biology (John Wiley & Sons, Inc.) and provides information about the major nucleoside/nucleotide constituents and structures for A-, B-, and Z-DNA. Tables and figures provide (1) experimentally useful properties of the nucleoside/nucleotide building blocks; (2) chemical structures of the nucleosides; (3) aspects of nucleotide stereochemistry that are important to an understanding of base pairing and secondary structure; (4) alternative (non-Watson-Crick) base pairings; and (5) the three best characterized helix structures for DNA: A-, B-, and Z-DNA.

Palladium-mediated C5 substitution of pyrimidine nucleosides.

One of the most efficient ways to link a reporter group to oligonucleotides is through the incorporation of a modified nucleoside during automated oligonucleotide synthesis. To be useful, it is important that the reporter group not interfere in hybridization reactions. This unit describes two linkers that can be used for the incorporation of a reporter group at the C5 position of deoxyuridine: a flexible aminoethylthioether linker, and a rigid amidopropynyl linker. The latter is sufficiently long and positioned so that the reporter group lies outside the major groove of the DNA duplex.

Unnatural nucleosides with unusual base pairing properties.

Synthetic modified nucleosides designed to pair in unusual ways with natural nucleobases have many potential applications in nucleic acid biochemistry. This overview lays the foundation for future protocol units on synthesis and application of unnatural bases, with particular emphasis on unnatural base analogs that mimic natural bases in size, shape, and biochemical processing. Topics covered including base pairs with alternative H-bonding schemes, hydrophobic base pairs, degenerate bases, universal nucleosides, and triplex constituents.

Related function of mouse SOX3, SOX9, and SRY HMG domains assayed by male sex determination.

Sox genes encode proteins related to each other, and to the sex determining gene Sry, by the presence of a DNA binding motif known as the HMG domain. Although HMG domains can bind to related DNA sequences, Sox gene products may achieve target gene specificity by binding to preferred target sequences or by interacting with specific partner proteins. To assess their functional similarities, we replaced the HMG box of Sry with the HMG box of Sox3 or Sox9 and tested whether these constructs caused sex reversal in XX mice. Our results indicate that such chimeric transgenes can functionally replace Sry and elicit development of testis cords, male patterns of gene expression, and elaboration of male secondary sexual characteristics. This implies that chimeric SRY proteins with SOX HMG domains can bind to and regulate SRY target genes and that potential SRY partner factor interactions are not disrupted by HMG domain substitutions. genesis 28:111-124, 2000.

NMR structure of a DNA duplex containing nucleoside analog 1-(2'-deoxy-beta-D-ribofuranosyl)-3-nitropyrrole and the structure of the unmodified control.

The three-dimensional structures of two DNA duplexes d(CATGAGTAC). d(GTACXCATG) (1) and d(CATGAGTAC).d(GTACTCATG) (2), where X represents 1-(2'-deoxy-beta-D-ribofuranosyl)-3-nitropyrrole, were solved using high resolution nuclear magnetic resonance spectroscopy and restrained molecular dynamics. Good convergence was observed between final structures derived from A- and B-form starting geometries for both 1 and 2. Structures of 1 and 2 are right-handed duplexes within the B-form conformational regime. Furthermore, the structures of 1 and 2 are highly similar, with differences in the structures localized to the vicinity of residue 14 (X versus T). The pyrrole group of 1 is in the syn conformation and it is displaced towards the major groove. Furthermore, unlike T14 in 2, the base of X14 has reduced pi-pi stacking interactions with C13 and C15 and the nitro group of X14 is pointing out of the major groove. The structures presented here establish the basis of the thermal data of DNA duplexes containing X and should be informative during the design of improved wild card nucleobase analogs.

Improved fidelity of thermostable ligases for detection of microsatellite repeat sequences using nucleoside analogs.

Microsatellite repeats consisting of dinucleotide sequences are ubiquitous in the human genome and have proven useful for linkage analysis, positional cloning and forensic identification purposes. In this study, the potential of utilizing the ligase detection reaction for the analysis of such microsatellite repeat sequences was investigated. Initially, the fidelity of thermostable DNA ligases was measured for model dinucleotide repeat sequences. Subsequently, the effect of modified oligonucleotides on ligation fidelity for dinucleotide repeats was determined using the nucleoside analogs nitroimidazole, inosine, 7-deazaguanosine and 2-pyrimidinone, as well as natural base mismatches. The measured error rates for a standard dinucleotide template indicated that the nitroimidazole nucleoside analogs could be used to increase the fidelity of ligation when compared to unmodified primers. Furthermore, use of formamide in the ligation buffer also increased ligation fidelity for dinucleotide repeat sequences. Using ligation-based assays to detect polymorphic alleles of microsatellite repeats in the human genome opens the possibility of using array-based typing of these loci for human identification, loss-of-heterozygosity studies and linkage analysis.

Genetic and physical mapping of the dreher locus on mouse chromosome 1.

Mutations in the mouse dreher (dr) gene cause skeletal defects, hyperactivity, abnormal gait, deafness, white belly spotting, and hypoplasia of Müllerian duct derivatives. To map dr to high resolution, we utilized two crosses. Initially, we analyzed an intersubspecific intercross to construct a detailed genetic map of simple sequence length polymorphism markers within a 6.3-cM region surrounding the dr locus. Subsequently, we analyzed a second intersubspecific intercross segregating for the dr(6J) allele, which positioned dr within a 0.13-cM region between Rxrg and D1Mit370. A physical contig of BAC clones spanning the dr critical region was constructed, and eight potential dr candidate genes were excluded by genetic or physical mapping. Together these results lay the foundation for positional cloning of the dr gene.

Triple helix formation: binding avidity of acridine-conjugated AG motif third strands containing natural, modified and surrogate bases opposed to pyrimidine interruptions in a polypurine target.

A critical issue for the general application of triple-helix-forming oligonucleotides (TFOs) as modulators of gene expression is the dramatically reduced binding of short TFOs to targets that contain one or two pyrimidines within an otherwise homopurine sequence. Such targets are often found in gene regulatory regions, which represent desirable sites for triple helix formation. Using intercalator-conjugated AG motif TFOs, we compared the efficacy and base selectivity of 13 different bases or base surrogates in opposition to pyrimidines and purines substituted into selected positions within a paradigm 15-base polypurine target sequence. We found that substitutions closer to the intercalator end of the TFO (positions 4-6) had a more deleterious effect on the dissociation constant (K d) than those farther away (position 11). Opposite T residues at position 11, 3-nitropyrrole or cytosine in the TFO provided adequate binding avidity for useful triplex formation (K ds of 55 and 110 nM, respectively). However, 3-nitropyrrole was more base selective than cytosine, binding to T >/=4 times better than to A, G or C. None of the TFOs tested showed avid binding when C residues were in position 11, although the 3-nitropyrrole-containing TFO bound with a K d of 200 nM, significantly better than the other designs. Molecular modeling showed that the 3-nitropyrrole.T:A triad is isomorphous with the A.A:T triad, and suggests novel parameters for evaluating new base triad designs.

A simple and regioselective synthesis of 13C-methyl-labeled thymidine.

A convenient and efficient procedure for the synthesis of 13C methyl- labeled thymidine by way of lithiation of t-butyldimethylsilyl protected 2'-deoxyuridine is described.

Exploratory studies on azole carboxamides as nucleobase analogs: thermal denaturation studies on oligodeoxyribonucleotide duplexes containing pyrrole-3-carboxamide.

In order to study base pairing properties of the amide group in DNA duplexes, a nucleoside analog, 1-(2'-deoxy-beta-D-ribofuranosyl)pyrrole-3-carboxamide, was synthesized by a new route from the ester, methyl 1-(2'-deoxy-3',5'-di-O-p -toluoyl-beta-D-erythro-pentofuranosyl)pyrrole-3-carboxylate, obtained from the coupling reaction between 1-chloro-2-deoxy-3,5-di-O -toluoyl-d-erythropentofuranose and methyl pyrrole-3-carboxylate by treatment with dimethylaluminum amide. 1-(2'-Deoxy-beta-D-ribofuranosyl)pyrrole-3-carboxamide was incorporated into a series of oligodeoxyribonucleotides by solid-phase phosphoramidite technology. The corresponding oligodeoxyribonucleotides with 3-nitropyrrole in the same position in the sequence were synthesized for UV comparison of helix-coil transitions. The thermal melting studies indicate that pyrrole-3-carboxamide, which could conceptually adopt either a dA-like or a dI-like hydrogen bond conformation, pairs with significantly higher affinity to T than to dC. Pyrrole-3-carboxamide further resembles dA in the relative order of its base pairing preferences (T >dG >dA >dC). Theoretical calculations on the model compound N-methylpyrrole-3-carboxamide using density functional theory show little difference in the preference for a syntau versus anti conformation about the bond from pyrrole C3 to the amide carbonyl. The amide groups in both the minimized antitau and syntau conformations are twisted out of the plane of the pyrrole ring by 6-14 degrees. This twist may be one source of destabilization when the amide group is placed in the helix. Another contribution to the difference in stability between the base pairs of pyrrole-3-carboxamide with T and pyrrole-3-carboxamide with C may be the presence of a hydrogen bond in the former involving an acidic proton (N3-H of T).

A comparative study of the thermal stability of oligodeoxyribonucleotides containing 5-substituted 2'-deoxyuridines.

Two series of modified oligonucleotides based on the self-complementary dodecamer d(CGCTAATTAGCG) were synthesized. The first contained the -C identical withCCH2R linker at C5 of deoxyuridine at position 4 (T*) of d(CGCT*AATTAGCG) and the second contained the -SR linker. The goal of the study was to evaluate and compare these two types of side chains for suitability as tethers for linking reporter groups to oligonucleotides. Our primary concern was how these tethers would effect duplex stability. The modified nucleosides were synthesized by palladium-mediated coupling reactions between the substituted alkyne and 5'-(4, 4'-dimethoxytrityl)-5-iodo-2'-deoxyuridine and between a disulfide and 5-chloromercurio-2'-deoxyuridine. The C5 deoxyuridine side chains evaluated included C identical with CCH3, C identical with CCH2NHC(O)CH3, C identical with CCH2N(CH3)2, C identical with CCH2N-HC(O)C5H4N, C identical with CCH2NHC(O)C10H15, SCH3, SC6H5 and SCH2CH2NHC(O)CH3. The nucleosides containing these substituents were incorporated into oligo-deoxyribonucleotides by standard phosphoramidite methodology. Melting studies demonstrated that the sequence containing the C identical with CCH3side chain had the highest T m value (59.1 degrees C) in comparison with the control sequence (T m = 55.2 degrees C) and that any additional substituent on C3 of the propynyl group lowered the T m value relative to propynyl. Nevertheless, even the most destabilizing substituent, adamantylcarbamoyl, yielded an oligodeoxyribonucleotide that dissociated with a T m of 54 degrees C, which is only 1.2 degrees C less than the control sequence. In contrast, the thioether substituents led to lower T m values, ranging from as low as 45.1 degrees C for SPh up to 52.2 degrees C for SMe. Replacing the methyl of the SMe substituent with a CH2CH2NHC(O)CH3 tether led to no further reduction in melting temperature. The T m value of the CH2CH2NHC(O)CH3-containing oligonucleotide was less than the natural sequence by 1.6 degrees C/substituent. This is sufficiently small that it is anticipated that the C5 thioether linkage may be as useful as the acetylenic linkage for tethering reporter groups to oligonucleotides. More importantly, the thioether linkage provides a means to position functional groups to interact specifically with opposing complementary (target) sequences.

The mouse Y chromosome: enrichment, sizing, and cloning by bivariate flow cytometry.

In this report, we demonstrate the utility of interleukin-2 (IL-2) stimulation of spleen cell cultures and bivariate flow cytometry in the analysis and purification of the C57BL/6J mouse Y Chromosome. We determined that the DNA content of the C57BL/6J Y Chromosome is approximately 94.7 Mb, making it similar in size to human Chromosome 16 and significantly larger than previous estimates. In addition, we describe the bulk isolation of mouse Y Chromosomes and demonstrate enrichment of the isolated material using a fluorescence in situ hybridization strategy. We detail the construction of two small insert Y Chromosome-specific libraries, ideal for sampling Y Chromosome sequences. From these libraries 1566 clones were analyzed. We provide a detailed characterization of 103 clones, generating nearly 50 kb of sequence. For 30 of these clones, we identify regions of homology to known Y chromosomal sequences, confirming the enrichment of the sorted DNA. From the remaining characterized clones, we describe the development of 15 male-specific PCR assays and 19 male-female PCR assays potentially originating from the pseudoautosomal region or other areas of X-Y or autosome-Y homology.

Comparison of the base pairing properties of a series of nitroazole nucleobase analogs in the oligodeoxyribonucleotide sequence 5'-d(CGCXAATTYGCG)-3'.

The nucleoside analogs 1-(2'-deoxy-beta-D-ribofuranosyl)- 3-nitropyrrole (9), 1-(2'-deoxy-beta-D-ribofuranosyl)-4-nitropyrazole (10), 1-(2'-deoxy-beta-D-ribofuranosyl)-4-nitroimidazole (11) and 1-(2'-deoxy-beta-D-ribofuranosyl)-5-nitroindole (21) were incorporated into the oligonucleotide 5'-d(CGCXAATTYGCG)-3'in the fourth position from the 5'-end. Procedures for synthesis of two of the nitroazole nucleosides, 10 and 11, were developed for this study. Each of the nitroazoles was converted into a 3'-phosphoramidite for oligonucleotide synthesis by conventional automated protocols. Four oligonucleotides were synthesized for each modified nucleoside in order to obtain duplexes in which each of the four natural bases was placed opposite (position 9) the nitroazole. In order to assess the role of the nitro group on base stacking interaction, sequences were also synthesized in which the fourth base was 1-(2'-deoxy-beta-D-ribofuranosyl)pyrazole. Corresponding sequences containing an abasic site, as well as sequences containing inosine, were synthesized for comparison. Thermal melting studies yielded T m values and thermodynamic parameters. Each nucleoside analog displayed a unique pattern of base pairing preferences. The least discriminating analog was 3-nitropyrrole, for which T m values differed by 5 degrees C and Delta G 25 degrees C ranged from -6.1 to -6.5 kcal/mol. 5-Nitroindole gave duplexes with significantly higher thermal stability, with Tm values varying from 35.0 to 46.5 degrees C and -Delta G 25 degrees C ranging from 7.7 to 8.5 kcal/mol. Deoxyinosine (22), a natural analog which has found extensive use as a universal nucleoside, is far less non-discriminating than any of the nitroazole derivatives. Tm values ranged from 35.4 degrees C when paired with G to 62.3 degrees C when paired with C. The significance of the nitro substituent was determined by comparison of the base pairing properties of a simple azole nucleoside, 1-(2'-deoxy-beta-D-ribofuranosyl)pyrazole (12). The pyrazole-containing sequences melt at 10-20 degrees C lower than the corresponding nitropyrazole-containing sequences. On average, the pyrazole-containing sequences were equivalent in stability (average Delta G = -4.8 kcal/mol) to the sequences containing an abasic site (average Delta G = -4.7 kcal/mol).

The synthesis and stability of oligodeoxyribonucleotides containing the deoxyadenosine mimic 1-(2'-deoxy-beta-D-ribofuranosyl)imidazole-4-carboxamide.

Oligodeoxyribonucleotides containing the nucleoside analog 1-(2'-deoxy-beta-D-ribofuranosyl) imidazole-4-carboxamide (1) were synthesized by solid phase phosphoramidite technology. Nucleoside 1, which contains a reactive exocyclic amide moiety, was incorporated into synthetic oligodeoxyribonucleotides with the use of a benzoyl protecting group. The corresponding oligodeoxyribonucleotides with dI or dA in the same position in the sequence were synthesized for UV comparison of helix-coil transitions. The thermal melting studies indicate that 1, which could conceptually adopt either a dA- or a dI-like hydrogen bond configuration, pairs with significantly higher affinity to T than to dC. Nucleoside 1 further resembles dA in the relative order of its base pairing preferences (T >dG >dA >dC), but may be less discriminating than dA in its bias for base pairing with T over dG.