Hospital Production of Sterile 2% Propofol Nanoemulsion: Proof of Concept.

In the context of essential drug shortages, this article reports a proof of concept for the hospital preparation of a 2% propofol injectable nanoemulsion. Two processes for propofol were assessed: mixing propofol with the commercial Intralipid® 20% emulsion and a "de novo" process performed using separate raw materials (i.e., oil, water, and surfactant) and optimized for droplet size reduction with a high-pressure homogenizer. A propofol HPLC-UV stability-indicating method was developed for process validation and short-term stability. In addition, free propofol in the aqueous phase was quantified by dialysis. To envision routine production, sterility and endotoxin tests were validated. Only the "de novo" process using high-pressure homogenization gave satisfactory physical results similar to commercialized Diprivan® 2%. Both terminal heat sterilization processes (121 °C, 15 min and 0.22 µm filtration) were validated, but an additional pH adjustment was required prior to heat sterilization. The propofol nanoemulsion was monodisperse with a 160 nm mean droplet size, and no droplets were larger than 5µm. We confirmed that free propofol in the aqueous phase of the emulsion was similar to Diprivan 2%, and the chemical stability of propofol was validated. In conclusion, the proof of concept for the in-house 2% propofol nanoemulsion preparation was successfully demonstrated, opening the field for the possible production of the nanoemulsion in hospital pharmacies.

Long-term physicochemical stability of acyclovir 5 mg/mL solution stored in polypropylene bags as a simulated hospital stock preparation.

PURPOSE: To investigate the long-term chemical and physical stability of 5-mg/mL acyclovir solution in polypropylene bags stored at 5°C ± 3°C for 2 months in order to determine the feasibility of batch production by a centralized intravenous additive service. METHODS: Eight empty 100-mL polypropylene bags (bags A) and 8 empty 250-mL bags (bags B) were respectively filled with 60 mL and 200 mL of 5-mg/mL acyclovir and 0.9% sodium chloride injection (NaCl) under aseptic conditions through a semiautomated manufacturing process and vacuum packed before storage at 5°C ± 3°C. Four bags A and 4 bags B were tested for chemical stability via a stability-indicating high-performance liquid chromatography (HPLC) method immediately after preparation (time 0) and after 7, 14, 21, 28, 35, 42, and 63 days. Samples for microbiological assay were collected on days 0 and 63 from 4 bags A and 4 bags B immediately after breaking the vacuum. Osmolality, pH, and physical stability were assessed by visual examination, Subvisible particle counting was performed on 6 additional bags (3 each of bags A and B). RESULTS: Mean percentage loss of acyclovir relative to the mean experimental concentration at time 0 was below 5% over the 63-day study period.. No significant differences of pH, no change in color and no precipitate were observed during the study. Subvisible particle counts were compliant with European Pharmacopoeia requirements. Acyclovir solutions remained sterile over the 63 days of the study. CONCLUSION: Extemporaneously prepared acyclovir 5 mg/mL solutions in 0.9% NaCl stored in polypropylene bags were chemically and physically stable over 63 days when stored at 5°C ± 3°C.

Simultaneous determination of five systemic azoles in plasma by high-performance liquid chromatography with ultraviolet detection.

A simple, specific and automatable HPLC assay was developed for a simultaneous determination of systemic azoles (fluconazole, posaconazole, voriconazole, itraconazole and its metabolite hydroxyl-itraconazole, and ketoconazole) in plasma. The major advantage of this assay was sample preparation by a fully automatable solid phase extraction with Varian Plexa cartridges. C6-phenyl column was used for chromatographic separation, and UV detection was set at a wavelength of 260 nm. Linezolid was used as an internal standard. The assay was specific and linear over the concentration range of 0.05 to 40 microg/ml excepted for fluconazole which was between 0.05 and 100 microg/ml, and itraconazole between 0.1 and 40 microg/ml. Validation data for accuracy and precision for intra- and inter-day were good and satisfied FDA's guidance: CV between 0.24% and 11.66% and accuracy between 93.8% and 108.7% for all molecules. This assay was applied to therapeutic drug monitoring on patients hospitalized in intensive care and onco-hematologic units.

Determination of linezolid in plasma and bronchoalveolar lavage by high-performance liquid chromatography with ultraviolet detection using a fully automated extraction method.

The aim of this study was to develop a specific and sensitive high-performance liquid chromatographic assay for the determination of linezolid in human plasma, and bronchoalveolar lavage. The sample extraction was based on a fully automated solid-phase extraction with an OASIS HLB cartridge. The method used ultraviolet detection set at a wavelength of 254 nm and a separation with a Zorbax Eclipse XDB C8 column. The assay has been found linear over the concentration range 0.02-30 microg/ml and 0.04-30 microg/ml for linezolid, respectively, in plasma and bronchoalveolar lavage. It provided good validation data for accuracy and precision (CV <4.64% and 5.08%, accuracy in the range 96.93-102.67% and 97.33-105.67%, respectively, for intra- and inter-day). The assay will be applied to determine the penetration of linezolid in human bronchoalveolar lavage during pharmacokinetic steady-state.