A new method for multispace analysis of multidimensional social exclusion.

Social phenomena are multidimensional and dependent on geographic space. Numerous methods are capable of representing multidimensional social phenomena through a composite indicator. Among these methods, principal component analysis (PCA) is the most used when considering the geographical perspective. However, the composite indicators built by the method are sensitive to outliers and dependent on the input data, implying informational loss and specific eigenvectors that make multi-space-time comparisons impossible. This research proposes a new method to overcome these problems: the Robust Multispace PCA. The method incorporates the following innovations. The sub-indicators are weighted according to their conceptual importance in the multidimensional phenomenon. The non-compensatory aggregation of these sub-indicators guarantees the function of the weights as of relative importance. Aggregating indicators in dimensions balances the weight structure of dimensions in the composite indicator. A new scale transformation function that eliminates outliers and allows multispatial comparison reduces by 1.52 times the informational loss of the composite indicator of social exclusion in eight cities' urban areas. The Robust Multispace-PCA has a high potential for appropriation by researchers and policymakers, as it is easy to follow, offers more informative and accurate representations of multidimensional social phenomena, and favors the development of policies at multiple geographic scales.

Wet fermentation of Coffea canephora by lactic acid bacteria and yeasts using the self-induced anaerobic fermentation (SIAF) method enhances the coffee quality.

This work aimed to evaluate the impact of inoculation single and co-cultivation of LAB and yeasts during the wet process of Coffea canephora using the self-induced anaerobic fermentation method. Saccharomyces cerevisiae, Totulaspora delbrueckii delbrueckii, Leuconostoc mesenteroides, and Lactiplantibacillus plantarum were monitored during fermentation. L. mesenteroides was detected in high concentrations in the coffee fruits (8.54 log10 cells/mL) and remained until the end of fermentation. Lactic and acetic acids were the main acids produced during fermentation. After 36 h of fermentation, 75.39% of malic acid was consumed in the L. mesenteroides + S. cerevisiae (MC) fermentations. In roasted coffee, the caffeine concentration reached 3.29 higher than the green beans in MC fermentation. Specific volatile compounds were detected in inoculated fermentation and may contribute to the beverage quality. Coffee inoculated with Leuconostoc mesenteroides was classified as fine (80.0-89.0), while the other fermentations were classified as premium (70.0-79.0). L. mesenteroides inoculation showed the best sensory score, and the beverage was characterized by caramel, fruity, and spices notes. L. mesenteroides inoculated alone or in co-culture with S. cerevisiae are promising starter cultures to improve Conilon coffee quality and obtain beverages with differentiated sensory profiles.

Beyond brewing: ß-acid rich hop extract in the development of a multifunctional polylactic acid-based food packaging.

Hops' (Humulus lupulus L.) phytochemicals are well known for their bioactivity. In the present study, the functional properties of hop extract rich in ß-acids, as potassium-salts structures (KBA), were investigated to develop a sustainable active food packaging. Polylactic acid (PLA)-based sheets were incorporated with increasing concentrations of hop extract (0.1-5 % w/w in terms of KBA) and characterized through performance and bioactive properties. KBA-added sheets presented decreased crystallinity and affected mechanical and thermal properties, especially with higher KBA amounts. The sheets' surface hydrophobicity gradually decreased by KBA-extract addition, while the water vapor permeability was not affected. A Fickian diffuse behavior and a better fit to application in fatty foods were observed during release tests. UV-blocking and antioxidant properties were improved by KBA incorporation. Furthermore, results from antibacterial assays revealed great susceptibility of Staphylococcus aureus and Listeria monocytogenes towards sheets added with 5 % of KBA. Moreover, the atomic force microscopy (AFM) observations revealed that KBA led to strong effects on the cell membranes of both bacteria, including disruption of membrane integrity and cell death. Therefore, this study is a sign of great prospects of hop ß-acids use, as KBA compound, in the production of sustainable active packaging for safe food shelf-life extension.

Inoculation of yeast and bacterium in wet-processed Coffea canephora.

This study evaluated the inoculation of Meyerozyma guilliermondii and Bacillus licheniformis, separately or in co-culture, in wet-processed conilon coffee. Wet fermentation was conducted for 48 h. Mesophilic bacteria, lactic acid bacteria, yeasts, and filamentous fungi were counted during fermentation. The inoculation of B. licheniformis and M. guilliermondii stimulated the multiplication of lactic acid bacteria. Acetic, citric, lactic, oxalic, malic, succinic, tartaric acids, glucose, and fructose were identified in all treatments at different concentrations. Methyl salicylate, 2-heptanol, 2-nonanol, and heptanone were found during fermentation. Methylpyrazine, 2,6-dimethylpyrazine, 2,5-dimethylpyrazine, and 3-ethyl-2,5-dimethylpyrazine identified after roasting assigned notes of "almond" and "chocolate" to the beverages. All treatments were classified as "premium," with the B. licheniformis treatment receiving the highest score. Bacillus licheniformis obtained better performance in fermentation, increasing coffee score and producing volatile compounds that provided positive sensory notes to the beverage.

Lab-made 3D printed electrochemical sensors coupled with chemometrics for Brazilian coffee authentication.

Analytical assurance of coffees' geographical indication (GI) authenticity is essential for producers and consumers. In this way, chemometric methods, electrochemical techniques, and 3D printed sensors become attractive to assure the coffee's quality. These sensors are low-cost, fast, and simple, with the possibility of miniaturization and portability. Therefore, 3D printed electrodes with chemometrics were used to classify-three Brazilian coffees from regions with GI. Further, Au/Gpt-PLA electrodes with partial least squares regression were used to detect the blending of GI coffee with traditional coffee. Soft independent modelling of class analogies coupled with cyclic voltammetry had the best performance, with 91-95% accuracy, specificity of 94-100%, and 80-83% sensitivity. Furthermore, the calibration models detected and quantified traditional coffee in all three coffees from regions with GI. The detection limits ranged from 1.4 to 10% (w/w), and quantification 4.6-32%, depending on the specific coffee.

Ultrasound, Acetic Acid, and Peracetic Acid as Alternatives Sanitizers to Chlorine Compounds for Fresh-Cut Kale Decontamination.

Chlorinated compounds are usually applied in vegetable sanitization, but there are concerns about their application. Thus, this study aimed to evaluate ultrasound (50 kHz), acetic acid (1000; 2000 mg/L), and peracetic acid (20 mg/L) and their combination as alternative treatments to 200 mg/L sodium dichloroisocyanurate. The overall microbial, physicochemical, and nutritional quality of kale stored at 7 °C were assessed. The impact on Salmonella enterica Typhimurium was verified by plate-counting and scanning electron microscopy. Ultrasound combined with peracetic acid exhibited higher reductions in aerobic mesophiles, molds and yeasts, and coliforms at 35 °C (2.6; 2.4; 2.6 log CFU/g, respectively). Microbial counts remained stable during storage. The highest reduction in Salmonella occurred with the combination of ultrasound and acetic acid at 1000 mg/L and acetic acid at 2000 mg/L (2.8; 3.8 log CFU/g, respectively). No synergistic effect was observed with the combination of treatments. The cellular morphology of the pathogen altered after combinations of ultrasound and acetic acid at 2000 mg/L and peracetic acid. No changes in titratable total acidity, mass loss, vitamin C, or total phenolic compounds occurred. Alternative treatments presented equal to or greater efficacies than chlorinated compounds, so they could potentially be used for the decontamination of kale.

Natural bioactives in perspective: The future of active packaging based on essential oils and plant extracts themselves and those complexed by cyclodextrins.

Aiming to attend to consumers' increasing demand for synthetic additives-free food products (stimulated by personal preferences or health concerns), the food industry has been trying to introduce natural bioactive compounds as food preservatives. In this respect, the development of active food packaging incorporated with natural compounds could be of great interest. However, this scenario still has some particularities that can hinder its application in the food industry, such as relatively reduced stability and, in some cases, undesirable sensorial properties. Cyclodextrins showed up as an option to circumvent these drawbacks by forming inclusion complexes that can protect the active compounds and perform their controlled release for contact with packaged food. For industrial manufacturing of active packages based on naturally occurring bioactive compounds, inclusion complexation can be considered one of the most promising alternatives. Therefore, this review summarizes the potential of nanotechnology in active food packaging by applying cyclodextrins as a carrier for natural active compounds, which can be provided by conventional sources and alternatively (and cost-effectively) agro-food by-products. The present study will benefit prospects for exploring cyclodextrins in active food packaging, which industrial application, without a doubt, will increase in the coming years.

Multimethod to prioritize projects evaluated in different formats.

The prioritization of Research, Development & Innovation Projects is an essential step in the innovation management process. As a rule, it is carried out applying methods that allow one to process experts' preferences concerning each project according to established criteria. However, there are different preference formats which experts can utilize: Ordering of Alternatives, Utility Values, Multiplicative Preference Relations, Fuzzy Estimates, Fuzzy Preference Relations, etc. Wherein, each prioritization method usually handles only one of these formats. Thus, the following question arises: how do we prioritize projects taken from portfolios evaluated in different formats? The proposed methodology presents a way to overcome this gap by achieving three main objectives. First, develop techniques that make it possible to crossover between preference formats and prioritization methods. Second, merge two portfolios of projects built applying different prioritization methods. Third, prioritize projects evaluated using different formats. The results of this study are universal and can be applied to replace any method of prioritization. In the specific case, the Mapping method is replaced by the Analytic Hierarchy Process and, then, by the Interactive Multicriteria Decision Making method (so called TODIM method). Techniques are also proposed to ensure compatibility between different preference formats and prioritization methods.•Prioritization of projects evaluated in different formats using the Mapping, AHP, and TODIM methods.•Providing fully consistent evaluation matrices.•Application of techniques to make different preference formats and prioritization methods compatible.

Fermentation of Coffea canephora inoculated with yeasts: Microbiological, chemical, and sensory characteristics.

This work aimed to evaluate Coffea canephora's microbiological, chemical, and sensory characteristics at 300 and 600 m elevation plantations processed by the natural method inoculated with yeasts. The coffee was spread on suspended terraces and sprayed with approximately 107 cfu/mL of Meyerozyma caribbica CCMA 1738 or Pichia kluyveri CCMA 1743, separately. Cherries containing bark and parchment were collected during fermentation for microbial groups counting, qPCR, quantification of organic acids, and sugars (HPLC). Volatile compounds (GC-MS) and sensory analyses, cupping test with expert coffee tasters and triangular test with consumers, were performed on roasted coffee beans. The inoculated yeasts persisted during the entire fermentation process. M. caribbica reduced the filamentous fungal population by 63% and 90% in the 300- and 600-m coffees, respectively. The 300-m coffee fruits showed higher concentrations of organic acids in all fermentation times when compared to the 600-m reaching out to 8 times more. Twenty-four volatile compounds were identified in the roasted coffee beans, with the predominance of pyrazines. The 600-m coffee inoculated with M. caribbica showed an increase of more than one point in the score given by certified tasters. Consumers noticed the M. caribbica inoculation in the 300- and 600-m-elevation coffees. M. caribbica is a promising starter culture for Conilon coffee with the potential to increase the beverage quality.

Microbial diversity and chemical characteristics of Coffea canephora grown in different environments and processed by dry method.

This study aimed to assess the microbial diversity in Coffea canephora grown in four different environments of Espirito Santo state, Brazil. Coffee cherries of two different altitudes (300 and 600 m) and two terrain aspects (Southeast-facing and Northwest-facing slopes) were processed by the dry method. Samples were collected during the drying/fermentation process. Microorganisms were counted, isolated, and identified by MALDI-TOF, followed by sequencing of the ribosomal region. Sugars and organic acids were quantified by HPLC and volatile compounds of the roasted coffees were evaluated by GC-MS. Bacteria population presented a significant number of isolates as well as higher counts during the drying/fermentation process with respect to the population of yeasts. The principal genera of microorganisms found were Bacillus, Pichia, Candida, and Meyerozyma. Meyerozyma guilliermondii was the most frequent yeast in all environments. On the other hand, Pichia kluyveri was found only in coffee cherries from the 600 m altitude. The highest concentration of acetic and succinic acids observed was 6.06 mg/g and 0.84 mg/g, respectively. Sucrose concentrations ranged from 0.68 to 5.30 mg/g, fructose from 1.30 to 4.60 mg/g, and glucose from 0.24 to 1.25 mg/g. Thirty-six volatile compounds, belonging to the groups of pyrazines, alcohols, aldehydes, ketones, and furans were identified in roasted coffee, with differences between altitude and terrain aspects. Information about microbial diversity is crucial to better understand the coffee quality and distinct characteristics of coffee produced in different environments.

Chemical composition, extraction sources and action mechanisms of essential oils: Natural preservative and limitations of use in meat products.

The antimicrobial activity of essential oils (EO) is associated with the presence of secondary metabolites synthesized by plants. Its mechanism of action involves the interaction of its hydrophobic components with the lipids present in the cell membrane of microorganism, resulting in metabolic damages and cell death. Spoilage and pathogenic microorganisms are contaminants in meat and meat products with considerable impacts on food quality and safety. Research shows the potential of applying essential oils in the preservation of meat food systems as compounds of low toxicity, extracted from a natural source, and as an alternative to consumer demand for healthy foods with a more natural appeal. In addition, there is a great diversity of plants from which essential oils can be extracted, whose antimicrobial activity in vitro and in meat and meat products has been proven.

Principles and applications of non-thermal technologies and alternative chemical compounds in meat and fish.

Conventional methods of food preservation have demonstrated several disadvantages and limitations in the efficiency of the microbial load reduction and maintain food quality. Hence, non-thermal preservation technologies (NTPT) and alternative chemical compounds (ACC) have been considered a high promissory replacer to decontamination, increasing the shelf life and promoting low levels of physicochemical, nutritional and sensorial alterations of meat and fish products. The combination of these methods can be a potential alternative to the food industry. This review deals with the most critical aspects of the mechanisms of action under microbial, physicochemical, nutritional and sensorial parameters and the efficiency of the different NTPT (ultrasound, high pressure processing, gamma irradiation and UV-C radiation) and ACC (peracetic acid, bacteriocins, nanoparticles and essential oils) applied in meat and fish products. The NTPT and ACC present a high capacity of microorganisms inactivation, ensuring low alterations level in the matrix and high reduction of environmental impact. However, the application conditions of the different methods as exposition time, energy intensity and concentration thresholds of chemical compounds need to be specifically established and continuously improved for each matrix type to reduce to the maximum the physicochemical, nutritional and sensorial changes. In addition, the combination of the methods (hurdle concept) may be an alternative to enhance the matrix decontamination. In this way, undesirable changes in meat and fish products can be further reduced without a decrease in the efficiency of the decontamination.

Effect of altitude and terrain aspect on the chemical composition of Coffea canephora cherries and sensory characteristics of the beverage.

BACKGROUND: The terrain slope and field altitude where the plant is cultivated influence the composition of coffee cherries. The aim of this study was to analyze the effects of different levels of altitude and terrain slope on the Coffea canephora cherries, as well as on the quality of the final beverage. C. canephora harvested in fields with 300 and 600 m altitude and with southeast- and northwest-facing slopes was evaluated. RESULTS: Lower pH values were observed for cherries cultivated at higher altitudes. The highest percentage of soluble solids (525.00 g kg-1 ) was found on northwest-facing slopes at 300 m. The highest values of phenolic compounds were observed at 600 m. Significant differences were found in the moisture of coffee cherries grown in different terrain slope and in the fiber content at different altitudes. The results do not enable us to conclude how the altitude and terrain slope influence the mineral content of cherries. Acidity, proteins, lipids, and carbohydrates were not influenced by altitude or terrain slope. The scores of cup quality were significantly affected by the altitude but not by the terrain slope. Coffees from cherries harvested in fields with 600 m altitude obtained the higher scores. CONCLUSION: Results show that altitude and terrain slope influence some compounds of coffee fruits, whereas others remain unaffected. The findings are important because, during coffee fruits processing, these compounds are used to produce others that will have an influence on the bean and coffee beverage quality. © 2020 Society of Chemical Industry.

Optimization of UV-C light and lactic acid combined treatment in decontamination of sliced Brazilian dry-cured loin: Salmonella Typhimurium inactivation and physicochemical quality.

This study aimed to test the effect of UV-C light (0.01-0.64 J/cm2) (UV) and lactic acid (0.1-12.9%) (LA) combined treatment on sliced Brazilian dry-cured loin (Socol, BDL) for (i) Salmonella Typhimurium reduction, (ii) physicochemical changes (color (a*, cured color, and ΔE), protein and lipid oxidation) and (iii) optimization using response surface methodology (RSM). Linear inactivation rate was achieved and UV was 2-fold more efficient than LA to inactivate S. Typhimurium. At the same time these combined technologies increased lipid (linear rate, R2adj = 0.88), protein oxidation (quadratic rate, R2adj = 0.86) and meat discoloration. Furthermore, the minimum point of the physicochemical changes was obtained using RSM, and the decontamination process was optimized. Hence, a reduction of 1.3 log cfu/g was achieved using 0.36 J/cm2 of UV and 7.7% of LA. These combined methods represent a promising industrial intervention strategy to dry-meat safety and quality.

Relationship between COVID-19 and weather: Case study in a tropical country.

This study aimed to evaluate the relationship between weather factors (temperature, humidity, solar radiation, wind speed, and rainfall) and COVID-19 infection in the State of Rio de Janeiro, Brazil. Solar radiation showed a strong (-0.609, p < 0.01) negative correlation with the incidence of novel coronavirus (SARS-CoV-2). Temperature (maximum and average) and wind speed showed negative correlation (p < 0.01). Therefore, in this studied tropical state, high solar radiation can be indicated as the main climatic factor that suppress the spread of COVID-19. High temperatures, and wind speed also are potential factors. Therefore, the findings of this study show the ability to improve the organizational system of strategies to combat the pandemic in the State of Rio de Janeiro, Brazil, and other tropical countries around the word.

A Chemometric Approach to Establish Underlying Connections between Lipid and Protein Oxidation and Instrumental Color and Texture Characteristics in Brazilian Dry-cured Loin.

This study aimed to use chemometrics to evaluate the influence of lipid and protein oxidation on the color and texture characteristics of Brazilian dry-cured loin (Socol, BDL). Upon exploration using hierarchical cluster analysis (HCA), two clusters were formed, indicating that higher water activity (aw) was associated with higher lipid and protein oxidation. However, this fact was associated with softening and low color quality (a*, chroma, and cured color). In a more in-depth exploration, using principal component analysis (PCA) for each cluster separately, connections between protein and lipid oxidation were found in high aw, as demonstrated by their statistical association. In the same way, relationships between high hardness and carbonyl contents were obtained only in high aw. In addition, an overall relationship (p < 0.05) between nondestructive measurements, such as hardness, and destructive methods (malonaldehyde and carbonyl contents) demonstrate that nondestructive techniques can be promising for further studies in the method replacement field. In this study, reasonable explanations of the connections between oxidative damage and quality traits in Socol are provided.

Modeling Salmonella Typhimurium Inactivation in Dry-Fermented Sausages: Previous Habituation in the Food Matrix Undermines UV-C Decontamination Efficacy.

The effects of previous Salmonella Typhimurium habituation to an Italian-style salami concerning pathogen resistance against ultraviolet-C light (UV-C) treatment were modeled in order to establish treatment feasibility for the decontamination of dry-fermented sausage. S. Typhimurium following 24 h habituation in fermented sausage (habituated cells) or non-habituation (non-habituated cells) were exposed to increasing UV-C radiation treatment times. The Weibull model was the best fit for describing S. Typhimurium UV-C inactivation. Heterogeneity in UV-C treatment susceptibilities within the S. Typhimurium population was observed, revealing intrinsic persistence in a sub-population. UV-C radiation up to 1.50 J/cm2 was a feasible treatment for dry-fermented sausage decontamination, as the matrices retained instrumental color and lipid oxidation physiochemical characteristics. However, habituation in the sausage matrix led to a 14-fold increase in the UV-C dose required to achieve the first logarithm reduction (δ value) in S. Typhimurium population. The results indicate that, although UV-C radiation might be considered an efficient method for dry-fermented sausage decontamination, effective doses should be reconsidered in order to reach desirable food safety parameters while preserving matrix quality.

Prior Exposure to Dry-Cured Meat Promotes Resistance to Simulated Gastric Fluid in Salmonella Typhimurium.

This study assessed if exposure of foodborne Salmonella enterica in Brazilian dry-cured loin (BDL) affects pathogen inactivation in simulated gastric fluid (SGF). The acid tolerance responses of three Salmonella enterica serovars, Typhimurium, Derby and Panama, were assessed by an acid challenge trial at pH 3.0 for 4 h following pre-adaptation to three conditions: neutral pH, acidic pH (4.5) or BDL matrix. The influence of Salmonella exposure temperature and time in the BDL on pathogen gastric fluid resistance was evaluated by the response surface methodology. The Salmonella serovars acquired acid tolerance when exposed to the BDL matrix and their response to acid stress was strain-dependent, with S. Typhimurium being the most tolerant strain. S. Typhimuirum exposed to temperatures >25 °C in the BDL matrix displayed increased resistance to SGF. By using the response surface methodology, it was determined that S. Typhimurium becomes less resistant against SGF if maintained in the BDL matrix at temperatures <7 °C, reinforcing the recommendation to store dry-cured meat under refrigeration in order to minimize consumer risks. The results presented herein point to a novel aspect of hurdle technology that should be taken into account to further understand the risks associated with hurdle-stable meat product, such as dry-cured meats, concerning foodborne pathogen contamination.

Spray-dried microcapsules of anthocyanin-rich extracts from Euterpe edulis M. as an alternative for maintaining color and bioactive compounds in dairy beverages.

Color is a sensory attribute that influences the acceptance of food and dyes are added into food products to provide them attractiveness. In this context, anthocyanins have merged as an alternative to synthetic dyes. This study aimed to develop food model systems of fermented or unfermented dairy beverages containing added microencapsulated anthocyanin-rich extracts from juçara palm fruit. The stabilities of both pigment and beverage throughout storage in opaque or transparent packaging have been evaluated. Acidity, pH and anthocyanin content in both beverages did not vary during 28 days of storage, and the content of bioactive compounds did not decrease over time. A slight overall color difference that is probably invisible to naked eyes was detected between the beverages analyzed at days 0 and 28. The potential of applying microencapsulated natural pigments into dairy matrices is an effort to increase their nutritional and sensorial values.