Combined Rotating Ultra-High-Resolution Spectral Domain OCT and Scheimpflug Imaging for In Vivo Corneal Optical Biopsy.

PURPOSE: This article introduces the Pentacam® Cornea OCT (optical coherence tomography). This advanced corneal imaging system combines rotating ultra-high-resolution spectral domain OCT with sub- 2-micron axial resolution and Scheimpflug photography. The purpose of this study is to present the first experience with the instrument and its potential for corneal diagnostics, including optical biopsy. METHODS: In this prospective study, the Pentacam® Cornea OCT was used to image the corneas of seven patients. The novel wide-angle pericentric scan system enables optimal OCT imaging performance for the corneal layer structure over the entire width of the cornea, including the limbal regions. A detailed analysis of the resulting images assessed the synergism between the OCT and Scheimpflug photography. RESULTS: The Pentacam® Cornea OCT demonstrated significantly improved image resolution and ability to individualize corneal layers with high quality. There is a synergism between the OCT high-definition signal to individualize details on the cornea and Scheimpflug photography to detect and quantify corneal scattering. The noncontact exam was proven safe, user-friendly, and effective for enabling optical biopsy. CONCLUSIONS: Pentacam® Cornea OCT is an advancement in corneal imaging technology. The ultra-high-resolution spectral domain OCT and Scheimpflug photography provide unprecedented detail and resolution, enabling optical biopsy and improving the understanding of corneal pathology. Further studies are necessary to compare and analyze the tomographic reconstructions of the cornea with the different wavelengths, which may provide helpful information for diagnosing and managing corneal diseases.

Keratoconus and Corneal Ectasia with Relatively Low Keratometry.

INTRODUCTION: The study aims to demonstrate and estimate the prevalence of clinical corneal ectasia and keratoconus (KC) in patients with relatively low keratometry (low-K KC). METHODS: In a retrospective, analytical, and non-interventionist study, one eye was randomly selected from 1054 patients from the original Tomographic Biomechanical Index (TBIv1) study and the external validation (from Rio de Janeiro, Brazil, and Milan, Italy clinics). Patients were stratified into three groups. Group 1 included 736 normal patients, and groups 2 and 3 included 318 patients with clinical KC in both eyes, divided into low-K KC (90 patients) and high-K KC (228 patients), respectively. All patients underwent a comprehensive ophthalmological evaluation along with Pentacam and Corvis ST (Oculus, Wetzlar, Germany) examinations. Cases with maximum mean zone 3 mm keratometry (Kmax zone mean 3 mm) lower than 47.6 diopters (D) were considered as low-keratometry keratoconus, and cases with Kmax zone mean 3 mm higher than 47.6 D were regarded as high-keratometry keratoconus. RESULTS: Ninety (28.30%) of the 318 KC group presented ectasia with low-keratometric values (low-Kmax). The average age in the normal group was 39.28 years (range 6.99-90.12), in the low-Kmax KC group it was 37.49 (range 13.35-78.45), and in the high-Kmax KC group it was 34.22 years (range 12.7-80.34). Mean and SD values and median (range), respectively, of some corneal tomographic and biomechanical parameters evaluated from the low-Kmax KC group were as follows: Belin-Ambrósio enhanced ectasia display (BAD-D) 3.79 ± 1.62 and 3.66 (0.83-9.73); Pentacam random forest index (PRFI) 0.78 ± 0.25 and 0.91 (0.05-1); corneal biomechanical index (CBI) 0.58 ± 0.43 and 0.75 (0-1); TBI 0.93 ± 0.17 and 1 (0.35-1); and stiffness parameter at A1 (SP-A1) 86.16 ± 19.62 and 86.05 (42.94-141.66). CONCLUSION: Relatively low keratometry, with a Kmax lower than 47.6 D, can occur in up to 28.30% of clinical keratoconus. These cases have a less severe presentation of the disease. Future studies involving larger populations and prospective designs are necessary to confirm the prevalence of keratoconus with low keratometry and define prognostic factors in such cases.

Dawn of diverse shelled and carbonaceous animal microfossils at ~ 571 Ma.

The Ediacaran-Cambrian transition documents a critical stage in the diversification of animals. The global fossil record documents the appearance of cloudinomorphs and other shelled tubular organisms followed by non-biomineralized small carbonaceous fossils and by the highly diversified small shelly fossils between ~ 550 and 530 Ma. Here, we report diverse microfossils in thin sections and hand samples from the Ediacaran Bocaina Formation, Brazil, separated into five descriptive categories: elongate solid structures (ES); elongate filled structures (EF); two types of equidimensional structures (EQ 1 and 2) and elongate hollow structures with coiled ends (CE). These specimens, interpreted as diversified candidate metazoans, predate the latest Ediacaran biomineralized index macrofossils of the Cloudina-Corumbella-Namacalathus biozone in the overlying Tamengo Formation. Our new carbonate U-Pb ages for the Bocaina Formation, position this novel fossil record at 571 ± 9 Ma (weighted mean age). Thus, our data point to diversification of metazoans, including biomineralized specimens reminiscent of sections of cloudinids, protoconodonts, anabaritids, and hyolithids, in addition to organo-phosphatic surficial coverings of animals, demonstrably earlier than the record of the earliest known skeletonized metazoan fossils.

Investigation of How Corneal Densitometry Artefacts Affect the Imaging of Normal and Keratoconic Corneas.

PURPOSE: To investigate corneal densitometry artefacts found in Pentacam Scheimpflug scans and their potential effect on assessing keratoconic (KC) corneas compared to normal (N) corneas. METHODS: The current study utilises Pentacam data of 458 N eyes, aged 35.6 ± 15.8 (range 10-87), referred to as the "N group", and 314 KC eyes, aged 31.6 ± 10.8 (range 10-72), referred to as the "KC group", where densitometry data were extracted and analysed via a custom-built MATLAB code. Radial summations of the densitometry were calculated at diameters ranging from 0.5 mm to 5.0 mm. The minimum normalised radial summation of densitometry (NRSD) value and angle were determined at each diameter and then linked. KC cone locations and areas of pathology were determined, and a comparison between N and KC groups was carried out both within the averaged area of pathology and over the corneal surface. RESULTS: Joining minimum NRSD trajectory points marked a clear distortion line pointing to the nasal-superior direction at 65° from the nasal meridian. The findings were found to be independent of eye laterality or ocular condition. Consistency was detected in the right and left eyes among both the N and KC groups. The location of the KC cone centre and the area of pathology were determined, and the densitometry output was compared both within the area of pathology and over the whole cornea. When the average densitometry was compared between N and KC eyes within the KC area of pathology, the N group recorded a 16.37 ± 3.15 normalised grey-scale unit (NGSU), and the KC group recorded 17.74 ± 3.4 NGSU (p = 0.0001). However, when the whole cornea was considered, the N group recorded 16.71 ± 5.5 NGSU, and the KC group recorded 15.72 ± 3.98 NGSU (p = 0.0467). A weak correlation was found between the Bad D index and NGSU when the whole measured cornea was considered (R = -0.01); however, a better correlation was recorded within the KC area of pathology (R = 0.21). CONCLUSIONS: Nasal-superior artefacts are observed in the densitometry Pentacam maps, and analysis shows no significant differences in their appearance between N or KC corneas. When analysing KC corneas, it was found that the cone positions are mostly on the temporal-inferior side of the cornea, opposite to the densitometry artefact NRSD trajectory. The analysis suggests that the corneal densitometry artefacts do not interfere with the KC area of pathology as it reaches its extreme in the opposite direction; therefore, weighting the densitometry map to increase the contribution of the inferior-temporal cornea and decreasing that of the superior-nasal area would improve the classification or identification of KC if densitometry is to be used as a KC metric.

Multimodal diagnostics for keratoconus and ectatic corneal diseases: a paradigm shift.

Different diagnostic approaches for ectatic corneal diseases (ECD) include screening, diagnosis confirmation, classification of the ECD type, severity staging, prognostic evaluation, and clinical follow-up. The comprehensive assessment must start with a directed clinical history. However, multimodal imaging tools, including Placido-disk topography, Scheimpflug three-dimensional (3D) tomography, corneal biomechanical evaluations, and layered (or segmental) tomography with epithelial thickness by optical coherence tomography (OCT), or digital very high-frequency ultrasound (dVHF-US) serve as fundamental complementary exams for measuring different characteristics of the cornea. Also, ocular wavefront analysis, axial length measurements, corneal specular or confocal microscopy, and genetic or molecular biology tests are relevant for clinical decisions. Artificial intelligence enhances interpretation and enables combining such a plethora of data, boosting accuracy and facilitating clinical decisions. The applications of diagnostic information for individualized treatments became relevant concerning the therapeutic refractive procedures that emerged as alternatives to keratoplasty. The first paradigm shift concerns the surgical management of patients with ECD with different techniques, such as crosslinking and intrastromal corneal ring segments. A second paradigm shift involved the quest for identifying patients at higher risk of progressive iatrogenic ectasia after elective refractive corrections on the cornea. Beyond augmenting the sensitivity to detect very mild (subclinical or fruste) forms of ECD, ectasia risk assessment evolved to characterize the inherent susceptibility for ectasia development and progression. Furthermore, ectasia risk is also related to environmental factors, including eye rubbing and the relational impact of the surgical procedure on the cornea.

Analysis of the Mechanical Properties of a Stabilized Subgrade Type Soil under a Sustainable Approach for Construction.

This article presents an experimental study to analyze the mechanical properties of a soil stabilized with ordinary Portland cement (OPC) under a sustainable approach consisting of a significant substitution of OPC for sugarcane bagasse ash (SCBA) to reduce the quantity of cement used in the stabilization, reaching the necessary mechanical requirements for its use as a subgrade layer. Soil specimens were elaborated with 3%, 5%, and 7% OPC as a stabilizing agent by weight of the soil. These mixtures were then partially substituted with 25%, 50%, and 75% SCBA, with these percentages being by weight of the stabilizer (OPC). Compaction, compressive strength, and California bearing ratio (CBR) tests were performed to evaluate the mechanical properties of the specimens. The results indicate that a 25% substitution of OPC by SCBA shows a similar performance to the mixture with only Portland cement, so a reduction in OPC use can be made. Further, with a substitution of 100% OPC by SCBA, the CBR of natural soil without stabilizers is improved.

Informatics progress of the Global Burden of Animal Diseases programme towards data for One Health.

The Global Burden of Animal Diseases (GBADs) programme will provide data-driven evidence that policy-makers can use to evaluate options, inform decisions, and measure the success of animal health and welfare interventions. The GBADs' Informatics team is developing a transparent process for identifying, analysing, visualising and sharing data to calculate livestock disease burdens and drive models and dashboards. These data can be combined with data on other global burdens (human health, crop loss, foodborne diseases) to provide a comprehensive range of information on One Health, required to address such issues as antimicrobial resistance and climate change. The programme began by gathering open data from international organisations (which are undergoing their own digital transformations). Efforts to achieve an accurate estimate of livestock numbers revealed problems in finding, accessing and reconciling data from different sources over time. Ontologies and graph databases are being developed to bridge data silos and improve the findability and interoperability of data. Dashboards, data stories, a documentation website and a Data Governance Handbook explain GBADs data, now available through an application programming interface. Sharing data quality assessments builds trust in such data, encouraging their application to livestock and One Health issues. Animal welfare data present a particular challenge, as much of this information is held privately and discussions continue regarding which data are the most relevant. Accurate livestock numbers are an essential input for calculating biomass, which subsequently feeds into calculations of antimicrobial use and climate change. The GBADs data are also essential to at least eight of the United Nations Sustainable Development Goals.

Le programme " Impact mondial des maladies animales " (GBADs) a pour but de réunir des éléments probants axés sur des données, qui soient exploitables par les décideurs politiques pour évaluer les solutions envisagées, fonder leurs décisions et mesurer le succès des interventions dans les domaines de la santé et du bien-être des animaux. L'équipe informatique du GBADs a conçu un processus transparent pour l'identification, l'analyse, la visualisation et le partage des données, grâce auquel il sera possible d'estimer l'impact des maladies du bétail et de réaliser des modèles et des tableaux de bord sur le sujet. Les données ainsi réunies peuvent être combinées avec celles couvrant d'autres problématiques ayant un impact mondial (santé humaine, pertes de récoltes, maladies d'origine alimentaire) afin de fournir l'éventail complet d'informations Une seule santé requis pour faire face à des enjeux tels que la résistance aux agents antimicrobiens ou le changement climatique. La première phase du programme a consisté à recueillir des données ouvertes auprès de diverses organisations internationales (qui procèdent également à leur propre transformation numérique). Les efforts déployés pour parvenir à une estimation précise des effectifs des cheptels ont mis en lumière les difficultés à trouver les données détenues par différentes sources, à y accéder et à les recouper au fil du temps. Des ontologies et des bases de données graphiques sont en cours d'élaboration pour résoudre le problème des silos de données et pour améliorer la facilité de recherche et l'interopérabilité des données. Les données du GBADs sont désormais expliquées sous forme de tableaux de bord, de récits construits à partir des données, ainsi que dans un site web documentaire et un Manuel de gouvernance des données, tous disponibles via une interface de programmation d'applications. Le partage des évaluations de la qualité des données renforce la confiance dans ces dernières et encourage à les appliquer pour traiter les problématiques affectant l'élevage ou relevant de l'approche Une seule santé. Les données relatives au bien-être animal présentent une difficulté particulière : elles sont, pour l'essentiel, détenues à titre privé et la question de savoir quelles sont les données les plus pertinentes est toujours en discussion. Les effectifs des cheptels doivent avoir été déterminés de manière précise afin de calculer la biomasse animale, élément qui entre par la suite dans le calcul des quantités d'agents antimicrobiens utilisés et des indicateurs du changement climatique. Les données du programme GBADs sont également essentielles au regard d'au moins huit des objectifs de développement durable des Nations Unies.

El programa sobre el Impacto Global de las Enfermedades Animales (GBADs) proporcionará información contrastada y basada en el uso de datos de la que luego puedan servirse los planificadores de políticas para valorar distintas opciones, decidir con conocimiento de causa y medir la eficacia de una u otra intervención en materia de sanidad y bienestar animales. El equipo informático encargado del GBADs está preparando un proceso transparente destinado a seleccionar, analizar, visualizar y poner en común datos que ayuden a calcular la carga de enfermedades del ganado y a guiar la elaboración de modelos y paneles de control. Estos datos pueden ser combinados con datos referidos a otros grandes problemas planetarios (salud humana, pérdida de cultivos, enfermedades de transmisión alimentaria) para obtener el repertorio completo de información en clave de Una sola salud que se necesita para abordar problemáticas como la resistencia a los antimicrobianos o el cambio climático. El programa empezó por reunir datos abiertos procedentes de organizaciones internacionales (inmersas, por otra parte, en su propio proceso de transformación digital). La labor emprendida para estimar con exactitud las cifras de ejemplares del mundo pecuario reveló ciertos problemas a la hora de encontrar, obtener y conciliar datos de distintas fuentes a lo largo del tiempo. Ahora se están elaborando ontologías y bases de datos gráficos para crear conexiones entre los "silos de datos" y lograr que los datos sean a la vez más compatibles entre sí y más fáciles de localizar. Paneles de control, interpretaciones narrativas de los datos ("data stories"), un sitio web de documentación y un manual de gestión de datos ayudan a explicar y aprehender los datos del GBADs, accesibles ahora por medio de una interfaz de programación de aplicaciones. El hecho de poner en común las evaluaciones de la calidad de los datos genera mayor confianza en esta información, promoviendo con ello su aplicación en temas de ganadería y de Una sola salud. Los datos de bienestar animal plantean una particular dificultad, pues gran parte de esta información está en manos privadas y todavía no está claro cuáles son los datos de mayor interés. Disponer de cifras exactas sobre el número de cabezas de ganado es fundamental para efectuar los cálculos de biomasa que después se utilizan para hacer otros cómputos referidos al uso de antimicrobianos y al cambio climático. Los datos del GBADs son asimismo esenciales para al menos ocho de los Objetivos de Desarrollo Sostenible de las Naciones Unidas.

Portland Cement-Based Grouts Enhanced with Basalt Fibers for Post-Tensioned Concrete Duct Filling.

In post-tensioned systems, grouts act as a last line of defense to prevent the penetration of harmful compounds such as chlorides, moisture and other substances that cause corrosion in the prestressing steel. For this reason, improving grouts results in the enhancement of the overall durability of the structure. In this study, the physical properties of grouts with basalt microfiber additions in the amounts of 0.03, 0.07 and 0.10% with respect to the mix volume were evaluated. The fresh properties included flowability and unit mass. Specimens were fabricated to evaluate drying shrinkage, compressive strength, air permeability and rapid permeability to chloride ions. The incorporation of basalt microfibers showed a beneficial effect on the physical properties of the grout by increasing the drying shrinkage resistance and decreasing the permeability compared to the reference mix and two commercial dry prepackaged grouts. The optimal grout mix was the one with a percentage of basalt microfibers of 0.10%, which decreased drying shrinkage by 15.98% at 14 days compared to the reference mix, and permeability to chloride ions decreased by 10.82% compared to the control mix.

Association between Hispanic or Latino ethnicity and pulmonary embolism severity, management, and in-hospital outcomes.

BACKGROUND: Hispanic and Latino patients are under-represented in existing healthcare disparities research in pulmonary embolism (PE). The goal of this study was to determine if differences in PE severity, treatment modality, or in-hospital outcomes exist for Hispanic or Latino patients with PE. METHODS: All PE cases from 2013 to 2019 at a single institution were reviewed. Clinical characteristics, imaging findings, intervention types, and in-hospital and 30-day outcomes were collected. Two cohorts were created based on patients' self-reported ethnicity. Outcomes were compared using univariate and multivariate analysis. RESULTS: A total of 1265 patients were identified with confirmed PE; 474 (37%) identified as Hispanic or Latino. Hispanic or Latino patients presented with high-risk PE significantly less often (19% vs 25%, p = 0.03). On univariate analysis, Hispanic or Latino patients had lower rates of PE-specific intervention (15% vs 19%, p = 0.03) and similar rates of inpatient mortality (6.8% vs 7.5%, p = 0.64). On ordinal regression analysis, Hispanic or Latino ethnicity was associated with lower PE severity (OR 0.69, 95% CI 0.54-0.89, p = 0.003). In subgroup analyses of intermediate and high-risk PEs, ethnicity was not a significant predictor of receipt of PE-specific intervention or in-hospital mortality. CONCLUSIONS: At this institution, Hispanic or Latino patients were less likely to present with high-risk PE but had similar rates of inpatient mortality. Future research is needed to identify if disparities in in-hospital care are driving perceived differences in PE severity and what addressable systematic factors are driving higher-than-expected in-hospital mortality for Hispanic or Latino patients.

Development and assessment of an epidemiologic dashboard for surveillance of Varroa destructor in Ontario apiaries.

Varroosis (caused by the Varroa destructor mite) is a key health issue for honey bees in North America. Because these mites can exist in reservoirs of feral honey bee colonies, eradication is impossible, and instead efforts are made to maintain mites below a critical threshold. Monitoring for Varroa mites within a population is key for allocating resources and targeting interventions but surveillance can be difficult and/or expensive. This project aims to reflect on the success of data dashboards developed throughout the 2019-coronavirus pandemic and showcase how these methods can improve surveillance of Varroa mite infestations in Ontario, Canada. Dashboards provide a consistent source of information and epidemiologic metrics through data visualizations, and mobilize data otherwise bound to tables and intermittent reports. In the present work, an interactive dashboard for the surveillance of Varroa mite infestations across the province is proposed. This dashboard was developed using routine ministry inspection data to depict the spatio-temporal distribution of mites across a five-year data collection period. Through interactive figures and plots, able to be disaggregated to a specific region and time frame, this dashboard will allow for members of the beekeeping community to monitor provincial mite levels throughout the season. Seven criteria found to be common across highly actionable COVID-19 dashboards were used in a beta testing stage of development to assess the quality of the dashboard, and critically reflect on its strengths and weaknesses. Furthermore, future directions for surveillance dashboards are explored, including integration with citizen science data collection to develop a comprehensive province-wide surveillance system. The outcome of this project is a functional dashboard proof-of-concept for population-level monitoring of Varroa mites and a model for future tools designed for other species and diseases.

Introduction and Clinical Validation of an Updated Biomechanically Corrected Intraocular Pressure bIOP (v2).

PURPOSE: To improve the stability of the Corvis ST biomechanically-corrected intraocular pressure measurements (bIOP) after refractive surgery and its independence of corneal biomechanics. METHODS: A parametric study was carried out using numerical models simulating the behavior of the eye globe under the effects of IOP and Corvis ST external air pressure and used to develop a new algorithm for bIOP; bIOP(v2). It was tested on 528 healthy participants to evaluate correlations with CCT and age. Its ability to compensate for the geometrical changes was tested in 60 LASIK and 80 SMILE patients with six months follow up. The uncorrected Corvis ST IOP (CVS-IOP) and the two versions of biomechanically corrected IOP; bIOP(v1) and bIOP(v2), were compared. RESULTS: In the healthy dataset, bIOP(v2) had weak and non-significant correlation with both CCT (R = -0.048, p = .266) and age (R = 0.085, p = .052). For bIOP(v1), the correlation was non-significant with CCT (R = -0.064, p = .139) but significant with age (R = -0.124, p < .05). In both LASIK and SMILE groups, the median change in bIOP(v2) following surgery was below 1 mmHg at follow-up stages and the interquartile range was smaller than both bIOP(v1) and CVS-IOP. CONCLUSION: The bIOP(v2) algorithm performs better than bIOP(v1) and CVS-IOP in terms of correlation with CCT and age. The bIOP(v2) also demonstrated the smallest variation after LASIK and SMILE refractive surgeries indicating improved ability to compensate for geometrical changes.

Biomechanics in Keratoconus Diagnosis.

Purpose: To prospectively review the importance of biomechanical assessment in the screening, diagnosis, prognosis, individualized planning, and clinical follow-up for ectatic corneal diseases.Methods: We demonstrate two commercially available devices to assess the corneal biomechanics in vivo, the Ocular Response Analyzer (ORA, Reichester, NY, USA) and the Corvis ST (Oculus, Wetzlar, Germany). Novel devices have been demonstrated to provide in vivo biomechanical measurements, including Brillouin optical microscopy and OCT elastography. Conclusion: The integration of biomechanical data and other data from multimodal refractive imaging using artificial intelligence demonstrated the ability to enhance accuracy in diagnosing ectatic corneal diseases.

In Vivo Corneal Stiffness Mapping by the Stress-Strain Index Maps and Brillouin Microscopy.

The study of corneal stiffness in vivo has numerous clinical applications such as the measurement of intraocular pressure, the preoperative screening for iatrogenic ectasia after laser vision correction surgery and the diagnosis and treatment of corneal ectatic diseases such as keratoconus. The localised aspect of the microstructure deterioration in keratoconus leading to local biomechanical softening, corneal bulging, irregular astigmatism and ultimately loss of vision boosted the need to map the corneal stiffness to identify the regional biomechanical failure. Currently, two methods to map the corneal stiffness in vivo are integrated into devices that are either already commercially available or about to be commercialised: the stress-strain index (SSI) maps and the Brillouin Microscopy (BM). The former method produces 2D map of stiffness across the corneal surface, developed through numerical simulations using the corneal shape, its microstructure content, and the deformation behaviour under air-puff excitation. It estimates the whole stress-strain behaviour, making it possible to obtain the material tangent modulus under different intraocular pressure levels. On the other hand, BM produces a 3D map of the corneal longitudinal modulus across the corneal surface and thickness. It uses a low-power near-infrared laser beam and through a spectral analysis of the returned signal, it assesses the mechanical compressibility of the tissue as measured by the longitudinal modulus. In this paper, these two techniques are reviewed, and their advantages and limitations discussed.

Corneal Biomechanics Losses Caused by Refractive Surgery.

Recent advances, specifically in the understanding of the biomechanical properties of the cornea and its response to diseases and surgical interventions, have significantly improved the safety and surgical outcomes of corneal refractive surgery, whose popularity and demand continue to grow worldwide. However, iatrogenic keratectasia resulting from the deterioration in corneal biomechanics caused by surgical interventions, although rare, remains a global concern. On one hand, in vivo biomechanical evaluation, enabled by clinical imaging systems such as the ORA and the Corvis ST, has significantly improved the risk profiling of patients for iatrogenic keratectasia. That is despite the fact the biomechanical metrics provided by these systems are considered indicators of the cornea's overall stiffness rather than its intrinsic material properties. On the other hand, new surgical modalities including SMILE were introduced to offer superior biomechanical performance to LASIK, but this superiority could not be proven clinically, creating more myths than answers. The literature also includes sound evidence that tPRK provided the highest preservation of corneal biomechanics when compared to both LASIK and SMILE. The aim of this review is twofold; to discuss the importance of corneal biomechanical evaluation prior to refractive surgery, and to assess the current understanding of cornea's biomechanical deterioration caused by mainstream corneal refractive surgeries. The review has led to an observation that new imaging techniques, parameters and evaluation systems may be needed to reflect the true advantages of specific refractive techniques and when these advantages are significant enough to offer better protection against post-surgery complications.

The role of dietary calcium in the etiology of childhood rickets in the past and the present.

For more than two centuries, lack of sunlight has been understood to cause vitamin D deficiency and documented as a primary cause of rickets. As such, evidence of rickets in the archeological record has been used as a proxy for vitamin D status in past individuals and populations. In the last decade, a clinical global consensus has emerged wherein it is recognized that dietary calcium deficiency also plays a role in the manifestation of rickets and classic skeletal deformities may not form if dietary calcium is normal even if vitamin D is deficient. This disease is now clinically called "nutritional rickets" to reflect the fact that rickets can take calcium deficiency-predominant or vitamin D deficiency-predominant forms. However, there are currently no paleopathological studies wherein dietary calcium deficiency is critically considered a primary etiology of the disease. We review here the interplay of calcium, vitamin D, and phosphorous in bone homeostasis, examine the role of dietary calcium in human health, and critically explore the clinical literature on calcium deficiency-predominant rickets. Finally, we report a case of rickets from the late Formative Period (~2500-1500 years ago) of the Atacama Desert and argue the disease in this infant is likely an example of calcium deficiency-predominant rickets. We conclude that most archeological cases of rickets are the result of multiple micronutrient deficiencies that compound to manifest in macroscopic skeletal lesions. For clinicians, these factors are important for implementing best treatment practice, and for paleopathologists they are necessary for appropriate interpretation of health in past communities.

Repetibilidade do estudo tomográfico da córnea com Scheimpflug rotacional, em olhos normais, olhos com ceratocone e olhos com ceratocone operados por crosslinking / Repeatability of the tomographic study of the cornea with a rotational Scheimpflug in normal eyes, eyes with keratoconus and eyes with crosslinking for keratoconus

RESUMO Objetivo Avaliar a precisão da tomografia corneana com imagens de Scheimpflug (Pentacam® AXL, OCULUS, Wetzlar, Alemanha) nos padrões de escaneamento com 25 e 50 imagens, verificando sua repetibilidade e reprodutibilidade em olhos normais, com ceratocone e com ceratocone após crosslinking. Métodos Estudo prospectivo, transversal, misto, no qual foram incluídos os pacientes que tinham córneas normais, ou com ceratocone; e não tinham realizado cirurgias corneanas, com exceção do crosslinking. Foram excluídos os pacientes que tivessem realizado outras cirurgias, como implante de anel intracorneano ou transplante de córnea. Foram realizadas três medidas com 25 imagens e três medidas com 50 imagens em cada olho incluído no estudo. Resultados O estudo avaliou 54 olhos de 41 pacientes. Destes, dez (18,52%) olhos eram com córneas normais e sem cirurgia ocular prévia aleatoriamente selecionados de 5 pacientes; 22 (40,74%) olhos aleatoriamente selecionados de 18 pacientes com ceratocone, sem cirurgia ocular prévia; e 22 (40,74%) olhos com ceratocone de 18 pacientes operados por crosslinking. No estudo da repetibilidade, percebemos uma maior variação de valores em todos os índices nos pacientes com ceratocone comparados aos de pacientes com olhos normais, em grande parte dos parâmetros analisados. Conclusão Não houve diferença significativa entre os métodos de escaneamento por 25 e 50 imagens, sendo o escaneamento por 25 imagens mais conveniente. A presença de ceratocone teve impacto negativo na repetibilidade de ambos os tipos de exame, e foi grande a concordância entre os métodos nos três grupos estudados. O coeficiente de repetibilidade permite considerar a relevância clínica dos dados para avaliar a progressão de ceratocone.

ABSTRACT Objective To evaluate the accuracy of corneal tomography with Scheimpflug images (Pentacam® AXL, OCULUS, Wetzlar, Germany) in scanning patterns with 25 and 50 images, by analyzing their repeatability and reproducibility in normal eyes, eyes with keratoconus and with keratoconus after crosslinking. Methods Prospective, cross-sectional, mixed study including patients who had normal corneas, or who had keratoconus, who had not undergone corneal surgery, with the exception of crosslinking. Patients who had undergone surgery for intracorneal ring implantation or corneal transplantation were excluded. Three measurements were performed with 25 images and three measurements were performed with 50 images on each eye included in the study. Results The study evaluated a total of 54 eyes of 41 patients. Of these, 10 (18.52%) eyes had normal corneas, without previous eye surgery, 22 (40.74%) were eyes with keratoconus, without previous eye surgery, and 22 (40.74%) were eyes with keratoconus, with crosslinking for keratoconus. In the study of repeatability, we noticed a greater variation of values in all indices in patients with KC compared to those with normal eyes, in most of the parameters analyzed. Conclusion There is no significant difference between the scanning methods with 25 and 50 images. However, 25 scans has advantages that make it the main method suggested. The presence of keratoconus has a negative impact on the repeatability of both types of examination, and there is great agreement between the methods in the three groups studied. The high repeatability coefficient in some parameters suggests that these data should be used with care in the assessment of keratoconus progression.

Investigation of the relationship between contact lens design parameters and refractive changes in Ortho-K.

Purpose: To investigate the relationship between Ortho-K contact lens design parameters and refractive power change of the eye through a parametric mathematical representation. Methods: The current study utilises fully anonymized records of 249 eyes, 132 right eyes, and 117 left eyes from subjects aged 14.1 ± 4.0 years on average (range 9-38 years) which were selected for secondary analysis processing. The data were split into 3 groups (G1 up to 35 days wear, from 10 to 35 days, G2 up to 99 days wear, more than 35-99 days & G3 more than 100 days wear) according to the length of time, in days, that the lenses were worn. Corneal shape was measured before and after contact lens wear using the Medmont E300 topographer, from which height and distance files were read by a custom-built MATLAB code to construct the corneal anterior surface independently. Changes in refractive power pre and post-Ortho-K wear were determined using constructed tangential refractive power maps from which both centrally flattened and annular steepened zones were automatically bounded, hence used to determine the refractive power change. Results: On average, flat Sim-K and steep Sim-K were reduced after Ortho-K lens wear by 1.6 ± 1.3 D and 1.3 ± 1.4 D respectively. The radius of the base curve was correlated with the mean central flattened zone power change strongly in G1 (R = 0.7, p < 0.001) and moderately in G2 (R = 0.4) and G3 (R = 0.4, p < 0.001). Hence, a strong correlation with the base curve was recorded in group G1 and moderate in G2 and G3. The reverse curve was very strongly correlated to the mean central flattened zone power change in G1 (R = 0.8, p < 0.001) and strongly correlated with G2 (R = 0.6, p < 0.001) and G3 (R = 0.7, p < 0.001). The reverse curve was also strongly correlated with the mean annular steepened zone power change among all groups G1, G2, and G3 (R = 0.7, R = 0.6 and R = 0.6) respectively (p < 0.001). Conclusions: Although the central corneal refractive power change was strongly correlated to the Ortho-K lens base curve, it characterized only 50% of the target power change. However, the annular steepened zone refractive power change appears to be a clearer predictor of target power change, as there appears to be a one-to-one inverse relationship with the target refractive power correction. Differences between these results and the literature may be a result of the topography software smoothing effect.

Enhanced Diagnostics for Corneal Ectatic Diseases: The Whats, the Whys, and the Hows.

There are different fundamental diagnostic strategies for patients with ectatic corneal diseases (ECDs): screening, confirmation of the diagnosis, classification of the type of ECD, severity staging, prognostic assessment, and clinical follow-up. The conscious application of such strategies enables individualized treatments. The need for improved diagnostics of ECD is related to the advent of therapeutic refractive procedures that are considered prior to keratoplasty. Among such less invasive procedures, we include corneal crosslinking, customized ablations, and intracorneal ring segment implantation. Besides the paradigm shift in managing patients with ECD, enhancing the sensitivity to detect very mild forms of disease, and characterizing the inherent susceptibility for ectasia progression, became relevant for identifying patients at higher risk for progressive iatrogenic ectasia after laser vision correction (LVC). Moreover, the hypothesis that mild keratoconus is a risk factor for delivering a baby with Down's syndrome potentially augments the relevance of the diagnostics of ECD. Multimodal refractive imaging involves different technologies, including Placido-disk corneal topography, Scheimpflug 3-D tomography, segmental or layered tomography with layered epithelial thickness using OCT (optical coherence tomography), and digital very high-frequency ultrasound (VHF-US), and ocular wavefront. Corneal biomechanical assessments and genetic and molecular biology tests have translated to clinical measurements. Artificial intelligence allows for the integration of a plethora of clinical data and has proven its relevance in facilitating clinical decisions, allowing personalized or individualized treatments.

Development of a Portland Cement-Based Material with Agave salmiana Leaves Bioaggregate.

Depending on the morphology of the natural fibers, they can be used as reinforcement to improve flexural strength in cement-based composites or as aggregates to improve thermal conductivity properties. In this last aspect, hemp, coconut, flax, sunflower, and corn fibers have been used extensively, and further study is expected into different bioaggregates that allow diversifying of the raw materials. The objective of the research was to develop plant-based concretes with a matrix based on Portland cement and an aggregate of Agave salmiana (AS) leaves, obtained from the residues of the tequila industry that have no current purpose, as a total replacement for the calcareous aggregates commonly used in the manufacturing of mortars and whose extraction is associated with high levels of pollution, to improve their thermal properties and reduce the energy demand for air conditioning in homes. Characterization tests were carried out on the raw materials and the vegetal aggregate was processed to improve its compatibility with the cement paste through four different treatments: (a) freezing (T/C), (b) hornification (T/H), (c) sodium hydroxide (T/NaOH), and (d) solid paraffin (T/P). The effect of the treatments on the physical properties of the resulting composite was evaluated by studying the vegetal concrete under thermal conductivity, bulk density, and compressive strength tests with a volumetric ratio between the vegetal aggregate and the cement paste of 0.36 and a water/cement ratio of 0.35. The hornification treatment showed a 15.2% decrease in the water absorption capacity of the aggregate, resulting in a composite with a thermal conductivity of 0.49 W/mK and a compressive strength of 8.66 MPa, which allows its utilization as a construction material to produce prefabricated blocks.