Organic micropollutant removal in full-scale rapid sand filters used for drinking water treatment in The Netherlands and Belgium.

Biological treatment processes have the potential to remove organic micropollutants (OMPs) during water treatment. The OMP removal capacity of conventional drinking water treatment processes such as rapid sand filters (RSFs), however, has not been studied in detail. We investigated OMP removal and transformation product (TP) formation in seven full-scale RSFs all treating surface water, using high-resolution mass spectrometry based quantitative suspect and non-target screening (NTS). Additionally, we studied the microbial communities with 16S rRNA gene amplicon sequencing (NGS) in both influent and effluent waters as well as the filter medium, and integrated these data to comprehensively assess the processes that affect OMP removal. In the RSF influent, 9 to 30 of the 127 target OMPs were detected. The removal efficiencies ranged from 0 to 93%. A data-driven workflow was established to monitor TPs, based on the combination of NTS feature intensity profiles between influent and effluent samples and the prediction of biotic TPs. The workflow identified 10 TPs, including molecular structure. Microbial community composition analysis showed similar community composition in the influent and effluent of most RSFs, but different from the filter medium, implying that specific microorganisms proliferate in the RSFs. Some of these are able to perform typical processes in water treatment such as nitrification and iron oxidation. However, there was no clear relationship between OMP removal efficiency and microbial community composition. The innovative combination of quantitative analyses, NTS and NGS allowed to characterize real scale biological water treatments, emphasizing the potential of bio-stimulation applications in drinking water treatment.

Integration of target analyses, non-target screening and effect-based monitoring to assess OMP related water quality changes in drinking water treatment.

The ever-increasing production and use of chemicals lead to the occurrence of organic micro-pollutants (OMPs) in drinking water sources, and consequently the need for their removal during drinking water treatment. Due to the sheer number of OMPs, monitoring using targeted chemical analyses alone is not sufficient to assess drinking water quality as well as changes thereof during treatment. High-resolution mass spectrometry (HRMS) based non-target screening (NTS) as well as effect-based monitoring using bioassays are promising monitoring tools for a more complete assessment of water quality and treatment performance. Here, we developed a strategy that integrates data from chemical target analyses, NTS and bioassays. We applied it to the assessment of OMP related water quality changes at three drinking water treatment pilot installations. These installations included advanced oxidation processes, ultrafiltration in combination with reverse osmosis, and granular activated carbon filtration. OMPs relevant for the drinking water sector were spiked into the water treated in these installations. Target analyses, NTS and bioassays were performed on samples from all three installations. The NTS data was screened for predicted and known transformation products of the spike-in compounds. In parallel, trend profiles of NTS features were evaluated using multivariate analysis methods. Through integration of the chemical data with the biological effect-based results potential toxicity was accounted for during prioritization. Together, the synergy of the three analytical methods allowed the monitoring of OMPs and transformation products, as well as the integrative biological effects of the mixture of chemicals. Through efficient analysis, visualization and interpretation of complex data, the developed strategy enabled to assess water quality and the impact of water treatment from multiple perspectives. Such information could not be obtained by any of the three methods alone. The developed strategy thereby provides drinking water companies with an integrative tool for comprehensive water quality assessment.

Monitoring transformation product formation in the drinking water treatments rapid sand filtration and ozonation.

Transformation products (TPs) can be formed from organic micropollutants in the water cycle through both biological and technological processes. Despite the TPs' potentially altered toxicity compared to their parent compounds, transformation processes are not routinely monitored, and in particular those induced by drinking water treatment remain elusive. This lack of information is mainly due to the technical challenges in analyzing TPs, which are often unknown compounds occurring in low concentrations. Their analysis requires sophisticated analytical techniques such as non-target screening (NTS) based on high-resolution tandem mass spectrometry (HRMS/MS) methods combined with novel data analysis approaches. Here, we addressed the challenges of TP analysis and the scarcity of TP research concerning studies in drinking water. We performed lab-scale experiments to monitor TP formation of three organic micropollutants prevalent in drinking water sources, i.e. carbamazepine, clofibric acid and metolachlor, during rapid sand filtration and ozonation, two readily applied biotic and abiotic drinking water treatments, respectively. To facilitate TP identification in the NTS data, halogenated and/or isotopically labeled parent compounds were used, revealing potential TPs through their isotopic patterns. The experimental results showed that degradation of the parent compounds and TP formation were treatment and compound specific. In silico TP prediction and literature mining enabled suspect screening of the non-target data and thereby significantly enhanced TP identification. Overall, the developed workflow enables an efficient and more comprehensive assessment of drinking water quality changes during water treatment.

Effect of oxidation and catalytic reduction of trace organic contaminants on their activated carbon adsorption.

The combination of ozonation and activated carbon (AC) adsorption is an established technology for removal of trace organic contaminants (TrOCs). In contrast to oxidation, reduction of TrOCs has recently gained attention as well, however less attention has gone to the combination of reduction with AC adsorption. In addition, no literature has compared the removal behavior of reduction vs. ozonation by-products by AC. In this study, the effect of pre-ozonation vs pre-catalytic reduction on the AC adsorption efficiency of five TrOCs and their by-products was compared. All compounds were susceptible to oxidation and reduction, however the catalytic reductive treatment proved to be a slower reaction than ozonation. New oxidation products were identified for dinoseb and new reduction products were identified for carbamazepine, bromoxynil and dinoseb. In terms of compatibility with AC adsorption, the influence of the oxidative and reductive pretreatments proved to be compound dependent. Oxidation products of bromoxynil and diatrizoic acid adsorbed better than their parent TrOCs, but oxidation products of atrazine, carbamazepine and dinoseb showed a decreased adsorption. The reductive pre-treatment showed an enhanced AC adsorption for dinoseb and a major enhancement for diatrizoic acid. For atrazine and bromoxynil, no clear influence on adsorption was noted, while for carbamazepine, the reductive pretreatment resulted in a decreased AC affinity. It may thus be concluded that when targeting mixtures of TrOCs, a trade-off will undoubtedly have to be made towards overall reactivity and removal of the different constituents, since no single treatment proves to be superior to the other.