Analyzer-free hard x-ray interferometry.

Objective. To enable practical interferometry-based phase contrast CT using standard incoherent x-ray sources, we propose an imaging system where the analyzer grating is replaced by a high-resolution detector. Since there is no need to perform multiple exposures (with the analyzer grating at different positions) at each scan angle, this scheme is compatible with continuous-rotation CT apparatus, and has the potential to reduce patient radiation dose and patient motion artifacts.Approach. Grating-based x-ray interferometry is a well-studied technique for imaging soft tissues and highly scattering objects embedded in such tissues. In addition to the traditional x-ray absorption-based image, this technique allows reconstruction of the object phase and small-angle scattering information. When using conventional incoherent, polychromatic, hard x-ray tubes as sources, three gratings are usually employed. To sufficiently resolve the pattern generated in these interferometers with contemporary x-ray detectors, an analyzer grating is used, and consequently multiple images need to be acquired for each view angle. This adds complexity to the imaging system, slows image acquisition and thus increases sensitivity to patient motion, and is not dose efficient. By simulating image formation based on wave propagation, and proposing a novel phase retrieval algorithm based on a virtual grating, we assess the potential of a analyzer-grating-free system to overcome these limitations.Main results. We demonstrate that the removal of the analyzer-grating can produce equal image contrast-to-noise ratio at reduced dose (by a factor of 5), without prolonging scan duration.Significance.By demonstrating that an analyzer-free CT system, in conjuction with an efficient phase retrieval algorithm, can overcome the prohibitive dose and workflow penalties associated grating-stepping, an alternative path towards realizing clinical inteferometric CT appears possible.

Laboratory cryo soft X-ray microscopy.

Lens-based water-window X-ray microscopy allows two- and three-dimensional (2D and 3D) imaging of intact unstained cells in their near-native state with unprecedented contrast and resolution. Cryofixation is essential to avoid radiation damage to the sample. Present cryo X-ray microscopes rely on synchrotron radiation sources, thereby limiting the accessibility for a wider community of biologists. In the present paper we demonstrate water-window cryo X-ray microscopy with a laboratory-source-based arrangement. The microscope relies on a λ=2.48-nm liquid-jet high-brightness laser-plasma source, normal-incidence multilayer condenser optics, 30-nm zone-plate optics, and a cryo sample chamber. We demonstrate 2D imaging of test patterns, and intact unstained yeast, protozoan parasites and mammalian cells. Overview 3D information is obtained by stereo imaging while complete 3D microscopy is provided by full tomographic reconstruction. The laboratory microscope image quality approaches that of the synchrotron microscopes, but with longer exposure times. The experimental image quality is analyzed from a numerical wave-propagation model of the imaging system and a path to reach synchrotron-like exposure times in laboratory microscopy is outlined.

Compact Zernike phase contrast x-ray microscopy using a single-element optic.

We demonstrate Zernike phase contrast in a compact soft x-ray microscope using a single-element optic. The optic is a combined imaging zone plate and a Zernike phase plate and does not require any additional alignment or components. Contrast is increased and inversed in an image of a test object using the Zernike zone plate. This type of optic may be implemented into any existing x-ray microscope where phase contrast is of interest.