RESUMO
OBJECTIVES: To demonstrate the usefulness of computer simulation techniques in the investigation of pediatric stair falls. Since stair falls are a common falsely reported injury scenario in child abuse, our specific aim was to investigate the influence of stair characteristics on injury biomechanics of pediatric stair falls by using a computer simulation model. Our long-term goal is to use knowledge of biomechanics to aid in distinguishing between accidents and abuse. METHODS: A computer simulation model of a 3-year-old child falling down stairs was developed using commercially available simulation software. This model was used to investigate the influence that stair characteristics have on biomechanical measures associated with injury risk. Since femur fractures occur in unintentional and abuse scenarios, biomechanical measures were focused on the lower extremities. RESULTS: The number and slope of steps and stair surface friction and elasticity were found to affect biomechanical measures associated with injury risk. CONCLUSIONS: Computer simulation techniques are useful for investigating the biomechanics of stair falls. Using our simulation model, we determined that stair characteristics have an effect on potential for lower extremity injuries. Although absolute values of biomechanical measures should not be relied on in an unvalidated model such as this, relationships between accident-environment factors and biomechanical measures can be studied through simulation. Future efforts will focus on model validation.
Assuntos
Acidentes por Quedas , Maus-Tratos Infantis/diagnóstico , Simulação por Computador , Ferimentos e Lesões/etiologia , Acidentes por Quedas/prevenção & controle , Fenômenos Biomecânicos , Maus-Tratos Infantis/legislação & jurisprudência , Pré-Escolar , Diagnóstico Diferencial , Humanos , Lactente , Modelos Anatômicos , Sensibilidade e Especificidade , Software , Ferimentos e Lesões/fisiopatologiaRESUMO
Individuals often use their wheelchair as a motor vehicle seat when traveling in motor vehicles. The current use of fixed vehicle-mounted wheelchair occupant restraint systems (FWORSs) often results in poor belt fit and discomfort. Additionally, satisfaction, usability and usage rate of FWORSs during transit use are often low. The automotive industry has shown improved occupant restraint usage, belt fit and injury protection when integrating the upper torso and pelvic restraint in a motor vehicle seat. This study compared occupant injury measures of a FWORS to a concept wheelchair integrated restraint system (WIRS) using a 20g frontal sled impact test with a 30 mph change in velocity. Neck loads, neck moments, head, pelvis and chest acceleration, sternum compression and knee and head excursion data were recorded from the wheelchair seated 50th percentile male hybrid III anthropomorphic test dummy (ATD). The WIRS resulted in a lower head injury criteria (HIC) value, lower sternum compression and a lower upper-torso restraint load than the FWORS. Compared with the FWORS, increased head, knee and wheelchair excursions and higher neck loads and moments were measured in the WIRS test. Both restraint scenario injury parameters were complied with occupant injury criteria based on General Motors Injury Assessment Reference Values (GM-IARVs) and occupant kinematic requirements defined by the Society of Automotive Engineers (SAE) voluntary standard, J2249. A higher motion criteria index was calculated for the WIRS scenario and a comparable combined injury criteria index was calculated for both restraint scenarios. The sled impact test showed WIRS concept feasibility, facilitating further development by industrial manufacturers who might further want to pursue this restraint principle to increase wheelchair occupant safety and comfort during transport in motor vehicles.
Assuntos
Acidentes de Trânsito , Veículos Automotores , Cintos de Segurança , Meios de Transporte , Cadeiras de Rodas , Fenômenos Biomecânicos , Desenho de Equipamento , Humanos , Ferimentos e Lesões/fisiopatologia , Ferimentos e Lesões/prevenção & controleRESUMO
To promote proper wheelchair securement in transportation, the proposed ANSI/RESNA Standard on Wheelchairs Used as Seats in Motor Vehicles will require that all transit wheelchairs be equipped with four securement points compatible with strap-type tiedowns. Through computer simulations, the location of these securement points has been found to influence wheelchair user response to a frontal crash. This study develops and employs an injury risk assessment method to compare the crashworthiness of various securement point configurations. The comparative injury risk assessment method is designed to predict the risk associated with internalized crash forces, as well as risk associated with secondary occupant impact with the vehicle interior. Injury criteria established by Federal Motor Vehicle Safety Standards and General Motors, along with excursion limitations set by the Society of Automotive Engineers (SAE) J2249 Wheelchair Tiedowns and Occupant Restraint Systems (WTORS) Standard were used as benchmarks for the risk assessment method. The simulation model subjected a secured commercial powerbase wheelchair with a seated 50th percentile male Hybrid III test dummy to a 20 g/30 mph crash. The occupant was restrained using pelvic and shoulder belts, and the wheelchair was secured with four strap-type tiedowns. Results indicated that securement points located 1.5 in to 2.5 in above the evaluated wheelchair's center of gravity provide the most effective occupant protection.
Assuntos
Acidentes de Trânsito/prevenção & controle , Acidentes de Trânsito/estatística & dados numéricos , Simulação por Computador , Medição de Risco/métodos , Gestão da Segurança/métodos , Cintos de Segurança , Meios de Transporte/métodos , Cadeiras de Rodas/efeitos adversos , Ferimentos e Lesões/etiologia , Ferimentos e Lesões/prevenção & controle , Escala Resumida de Ferimentos , Aceleração , Benchmarking , Fenômenos Biomecânicos , Desenho de Equipamento , Humanos , Masculino , Manequins , Valor Preditivo dos Testes , Reprodutibilidade dos Testes , Fatores de Risco , Meios de Transporte/instrumentação , Ferimentos e Lesões/classificaçãoRESUMO
When designing wheelchairs for use as motor vehicle seats, special design criteria must be followed to assure the crash safety of the wheelchair user. Failure of seating system components under crash loading conditions could lead to serious injury or fatality. In this study, seat and seat-back loading in a frontal crash are explored using computer simulation techniques. A previously validated simulation model consisting of a powerbase wheelchair and a seated 50th-percentile male test dummy subjected to a 20g/30mph frontal impact were used for the study. Since such a wide range of seating systems are available, parametric analyses were conducted to evaluate the influence of surface stiffness and seat-back angle on wheelchair seat and back loading. Seat loading varied with stiffness, ranging from 819-3,273 lb., while seat-back loading was found to be between 1,427-2,691 lb., depending upon back stiffness and recline angle.
Assuntos
Acidentes de Trânsito , Cadeiras de Rodas , Desenho Assistido por Computador , Desenho de Equipamento , Segurança de Equipamentos , Humanos , Teste de Materiais , Fenômenos Físicos , Física , Cadeiras de Rodas/normasRESUMO
Obtaining proper occupant restraint fit when using a wheelchair as a motor vehicle seat is often difficult to attain with vehicle-mounted restraint systems. The comprehensive evaluation conducted in this study illustrates the occupant crash protection benefits of wheelchair-integrated restraint systems, as compared to vehicle-mounted restraint systems. Using computer crash simulation, occupant kinematic and biomechanical measures associated with a 20g/30mph frontal impact were evaluated and compared to injury criteria and SAE J2249 WTORS kinematic limits. These measures were also used to compile a Motion Criteria (MC) index and Combined Injury Criteria (CIC) index for each evaluated restraint scenario. These indices provide a composite method for comparing various crash scenarios. With the exception of an unsafe 36-inch height off-shoulder shoulder belt anchor scenario, the MC index was minimized for the integrated restraint scenario. Similarly, the CIC index was also minimized for the wheelchair-integrated restraint scenario. This preliminary study emphasizes the need for transfer of integrated restraint technology to the wheelchair transportation industry.
Assuntos
Acidentes de Trânsito , Cadeiras de Rodas , Acidentes , Desenho de Equipamento , Segurança de Equipamentos , Humanos , Restrição Física , Medição de Risco , Cadeiras de Rodas/normas , Ferimentos e Lesões/epidemiologia , Ferimentos e Lesões/prevenção & controleRESUMO
The Americans with Disabilities Act (ADA) has led to an increased number of wheelchair users seeking transportation services. Many of these individuals are unable to transfer to a vehicle and are instead required to travel seated in their wheelchairs. Unfortunately, wheelchairs are not typically designed with the same occupant protection features as motor vehicle seats, and wheelchair seated occupants may be at higher risk for injury in a crash. To study the effects of crash level forces on wheelchairs and their occupants, it is useful to simulate crash conditions using computer modeling. This study has used a dynamic lumped mass crash simulator, in combination with sled impact testing, to develop a model of a secured commercial powerbase and restrained occupant subjected to a 20 g/30 mph frontal motor vehicle crash. Time histories profiles of simulation-generated wheelchair kinematics, occupant accelerations, tiedown forces and occupant restraint forces were compared to sled impact testing for model validation. Validation efforts for this model were compared to validation results found acceptable for the ISO/SAE surrogate wheelchair model. This wheelchair-occupant simulation model can be used to investigate wheelchair crash response or to evaluate the influence of various factors on occupant crash safety.
Assuntos
Acidentes , Simulação por Computador , Cadeiras de Rodas , Humanos , Teste de Materiais , SoftwareRESUMO
Wheelchair designs based upon loads applied quasi-statically during normal mobility use are apt to be inadequate to handle the increased level of dynamic crash forces that may be encountered when using the wheelchair as a motor vehicle seat. The purpose of this study was to characterize the integrity of wheelchair caster assemblies under simulated crash conditions. This study utilized dynamic drop (DD) testing, with loading levels and rates adjusted to match those found previously in sled impact testing and computer crash simulations. The results verify that current caster assembly designs may not be able to withstand forces associated with a crash. Five of seven evaluated caster assemblies failed when loaded to 8,007 N, or less, at loading rates seen in sled testing. DD testing used in this study is a valuable tool that can be used in the design of transport wheelchair components.
Assuntos
Acidentes , Cadeiras de Rodas/provisão & distribuição , Cadeiras de Rodas/normas , Fenômenos Biomecânicos , Simulação por Computador , Desenho de Equipamento , Humanos , Teste de MateriaisRESUMO
The Americans with Disabilities Act (ADA) has led to an increase in disabled travelers, many of whom are unable to transfer to a vehicle seat and are required to use their wheelchair to fulfill this function. ANSI/RESNA is currently developing a transportable wheelchair standard which will identify design requirements and testing methods for wheelchairs suitable for transport. Wheelchair manufacturers should begin to modify their existing design criteria established for a normal mobility function to design criteria appropriate for a transportation function which may subject the wheelchair to large dynamic crash forces. A thorough understanding of the crash environment and its effect on the wheelchair is necessary to insure the safety of the wheelchair user. To assist manufacturers in the design effort, this study uses mathematical crash simulations to evaluate loads imposed upon a wheelchair when subjected to a 48 kph/20 g frontal crash. Using a four-point belt tiedown system to secure the wheelchair, securement point, seat, lap belt anchor, and wheel loads are evaluated under three different securement configurations. Results show that positioning of rear securement points near the wheelchair center of gravity can serve as an effective strategy for managing crash response and loadings on the wheelchair. Force ranges for each of the evaluated parameters, derived for a 50th percentile male using a simulated power wheelchair, are provided for use as a preliminary guide when designing transportable wheelchairs.
Assuntos
Acidentes de Trânsito , Simulação por Computador , Desenho Assistido por Computador , Cintos de Segurança , Meios de Transporte , Cadeiras de Rodas/normas , Fenômenos Biomecânicos , Desenho de Equipamento , Humanos , Masculino , Manequins , Teste de Materiais , Cadeiras de Rodas/provisão & distribuiçãoRESUMO
The quality of life of patients relying on electrically powered artificial organs is currently restricted by the limited energy availability provided by portable batteries. As these patients become increasingly ambulatory, and are developing more active lifestyles, this limitation grows more apparent. Coincidentally, these patients may themselves be capable of generating electrical power as a consequence of their physical activity. Extraction of this latent autologous energy could, in turn, be used to augment charging of internal batteries--thus untethering the patient from external power for extended periods of time. In this study, the viability of deriving energy associated with natural human ambulation has been evaluated. The kinematic components of gait were evaluated to identify the largest useful forces and moments that may be harnessed as an energy source, while presenting minimal "perceived" work for the patient. It was found that the ground reaction forces associated with the heel strike and toe-off phases of the gait represent the greatest potential for usable energy. This study uses a piezoelectric array within the midsole of the shoe for the conversion of mechanical to electric energy. This power could then be easily coupled in tandem with existing transcutaneous transformers for augmenting or temporarily replacing external power sources.