Bistable Boron-Related Defect Associated with the Acceptor Removal Process in Irradiated p-Type Silicon-Electronic Properties of Configurational Transformations.

The acceptor removal process is the most detrimental effect encountered in irradiated boron-doped silicon. This process is caused by a radiation-induced boron-containing donor (BCD) defect with bistable properties that are reflected in the electrical measurements performed in usual ambient laboratory conditions. In this work, the electronic properties of the BCD defect in its two different configurations (A and B) and the kinetics behind transformations are determined from the variations in the capacitance-voltage characteristics in the 243-308 K temperature range. The changes in the depletion voltage are consistent with the variations in the BCD defect concentration in the A configuration, as measured with the thermally stimulated current technique. The A→B transformation takes place in non-equilibrium conditions when free carriers in excess are injected into the device. B→A reverse transformation occurs when the non-equilibrium free carriers are removed. Energy barriers of 0.36 eV and 0.94 eV are determined for the A→B and B→A configurational transformations, respectively. The determined transformation rates indicate that the defect conversions are accompanied by electron capture for the A→B conversion and by electron emission for the B→A transformation. A configuration coordinate diagram of the BCD defect transformations is proposed.

Sr and Mg Doped Bi-Phasic Calcium Phosphate Macroporous Bone Graft Substitutes Fabricated by Robocasting: A Structural and Cytocompatibility Assessment.

Bi-phasic calcium phosphates (BCPs) are considered prominent candidate materials for the fabrication of bone graft substitutes. Currently, supplemental cation-doping is suggested as a powerful path to boost biofunctionality, however, there is still a lack of knowledge on the structural role of such substituents in BCPs, which in turn, could influence the intensity and extent of the biological effects. In this work, pure and Mg- and Sr-doped BCP scaffolds were fabricated by robocasting from hydrothermally synthesized powders, and then preliminarily tested in vitro and thoroughly investigated physically and chemically. Collectively, the osteoblast cell culture assays indicated that all types of BCP scaffolds (pure, Sr- or Sr-Mg-doped) delivered in vitro performances similar to the biological control, with emphasis on the Sr-Mg-doped ones. An important result was that double Mg-Sr doping obtained the ceramic with the highest ß-tricalcium phosphate (ß-TCP)/hydroxyapatite mass concentration ratio of ~1.8. Remarkably, Mg and Sr were found to be predominantly incorporated in the ß-TCP lattice. These findings could be important for the future development of BCP-based bone graft substitutes since the higher dissolution rate of ß-TCP enables an easier release of the therapeutic ions. This may pave the road toward medical devices with more predictable in vivo performance.

Self-connected CuO-ZnO radial core-shell heterojunction nanowire arrays grown on interdigitated electrodes for visible-light photodetectors.

An original photodetector system based on self-connected CuO-ZnO radial core-shell heterojunction nanowire arrays grown on metallic interdigitated electrodes, operating as visible-light photodetector was developed by combining simple preparation approaches. Metallic interdigitated electrodes were fabricated on Si/SiO2 substrates using a conventional photolithography process. Subsequently, a Cu layer was electrodeposited on top of the metallic interdigitated electrodes. The CuO nanowire arrays (core) were obtained by thermal oxidation in air of the Cu layer. Afterwards, a ZnO thin film (shell) was deposited by RF magnetron sputtering covering the surface of the CuO nanowires. The morphological, structural, compositional, optical, electrical and photoelectrical properties of the CuO nanowire arrays and CuO-ZnO core-shell nanowire arrays grown on metallic interdigitated electrodes were investigated. The performances of the devices were evaluated by assessing the figures of merit of the photodetectors based on self-connected CuO-ZnO core-shell heterojunction nanowire arrays grown on the metallic interdigitated electrodes. The radial p-n heterojunction formed between CuO and ZnO generates a type II band alignment that favors an efficient charge separation of photogenerated electron-hole pairs at the CuO-ZnO interface, suppressing their recombination and consequently enhancing the photoresponse and the photoresponsivity of the photodetectors. The electrical connections in the fabricated photodetector devices are made without any additional complex and time-consuming lithographic step through a self-connecting approach for CuO-ZnO core-shell heterojunction nanowire arrays grown directly onto the Ti/Pt metallic interdigitated electrodes. Therefore, the present study provides an accessible path for employing low dimensional complex structures in functional optoelectronic devices such as photodetectors.

The Behavior of Gold Metallized AlN/Si- and AlN/Glass-Based SAW Structures as Temperature Sensors.

Thin AlN piezoelectric layers have been deposited on high resistivity Si and glass substrates by reactive RF magnetron sputtering, in order to manufacture one-port gigahertz operating surface acoustic wave (SAW)-type resonators to be used as temperature sensors. The growth morphology surface topography, crystallographic structure, and crystalline quality of the AlN layers have been analyzed. Advanced nanolithographic techniques have been used to manufacture structures having interdigitated transducers with fingers and finger interdigit spacing width in the range of 250-170 nm. High resonance frequency ensures the increase of the sensitivity, but also of its normalized value, the temperature coefficient of frequency (TCF). The resonance frequency shift versus temperature has been measured in the -267°C-+150°C temperature range, using a cryostat setup adapted for on wafer microwave measurements up to 50 GHz. The sensitivity and the TCF were determined in the 25 °C-150 °C temperature range.

Mechanical, Corrosion and Biological Properties of Room-Temperature Sputtered Aluminum Nitride Films with Dissimilar Nanostructure.

Aluminum Nitride (AlN) has been long time being regarded as highly interesting material for developing sensing applications (including biosensors and implantable sensors). AlN, due to its appealing electronic properties, is envisaged lately to serve as a multi-functional biosensing platform. Although generally exploited for its intrinsic piezoelectricity, its surface morphology and mechanical performance (elastic modulus, hardness, wear, scratch and tensile resistance to delamination, adherence to the substrate), corrosion resistance and cytocompatibility are also essential features for high performance sustainable biosensor devices. However, information about AlN suitability for such applications is rather scarce or at best scattered and incomplete. Here, we aim to deliver a comprehensive evaluation of the morpho-structural, compositional, mechanical, electrochemical and biological properties of reactive radio-frequency magnetron sputtered AlN nanostructured thin films with various degrees of c-axis texturing, deposited at a low temperature (~50 °C) on Si (100) substrates. The inter-conditionality elicited between the base pressure level attained in the reactor chamber and crystalline quality of AlN films is highlighted. The potential suitability of nanostructured AlN (in form of thin films) for the realization of various type of sensors (with emphasis on bio-sensors) is thoroughly probed, thus unveiling its advantages and limitations, as well as suggesting paths to safely exploit the remarkable prospects of this type of materials.

Iodine Migration and Degradation of Perovskite Solar Cells Enhanced by Metallic Electrodes.

We monitored the evolution in time of pinhole-free structures based on FTO/TiO2/CH3NH3PbI2.6Cl0.4 layers, with and without spiro-OMeTAD and counter electrodes (Ag, Mo/Ag, and Au), aged at 24 °C in a dark nitrogen atmosphere. In the absence of electrodes, no degradation occurs. While devices with Au show only a 10% drop in power conversion efficiency, remaining stable after a further overheating at 70 °C, >90% is lost when using Ag, with the process being slower for Mo/Ag. We demonstrate that iodine is dislocated by the electric field between the electrodes, and this is an intrinsic cause for electromigration of I- from the perovskite until it reaches the anode. The iodine exhaustion in the perovskite layer is produced when using Ag electrodes, and AgI is formed. We hypothesize that in the presence of Au the iodine migration is limited due to the buildup of I- negative space charge accumulated at the perovskite-OMeTAD interface.

Fabrication of antimicrobial silver-doped carbon structures by combinatorial pulsed laser deposition.

We report on the selection by combinatorial pulsed laser deposition of Silver-doped Carbon structures with reliable physical-chemical characteristics and high efficiency against microbial biofilms. The investigation of the films was performed by scanning electron microscopy, high resolution atomic force microscopy, energy dispersive X-Ray Spectroscopy, X-ray diffraction, Raman spectroscopy, bonding strength "pull-out" tests, and surface energy measurements. In vitro biological assays were carried out using a large spectrum of bacterial and fungal strains, i.e., Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Enterococcus faecalis and Candida albicans. The biocompatibility of the films obtained was evaluated on MG63 mammalian cell cultures. The optimal combination with reasonable physical-chemical properties, efficient protection against microbial colonization and beneficial effects on human cells was found for Silver-doped Carbon films containing 2 to 7 at.% silver. These mixtures can be used to fabricate safe and efficient coatings of metallic implants, with the goal to decrease the risk of implant associated biofilm infections which are difficult to treat and often responsible for implant failure.