PDMS free-flow electrophoresis chips with integrated partitioning bars for bubble segregation.

In this work, a microfluidic free-flow electrophoresis device with a novel approach for preventing gas bubbles from entering the separation area is presented. This is achieved by integrating partitioning bars to reduce the channel depth between electrode channels and separation chamber in order to obtain electrical contact and simultaneously prevent bubbles from entering the separation area. The three-layer sandwich chip features a reusable carrier plate with integrated ports for fluidic connection combined with a softlithographically cast microfluidic PDMS layer and a sealing glass slide. This design allows for a straightforward and rapid chip prototyping process. The performance of the device is demonstrated by free-flow zone electrophoretic separations of fluorescent dye mixtures as well as by the separation of labeled amines and amino acids with separation voltages up to 297 V.

Fabrication and characterization of homogeneous surface-enhanced Raman scattering substrates by single pulse UV-laser treatment of gold and silver films.

The fabrication of SERS-active substrates, which offer high enhancement factors as well as spatially homogeneous distribution of the enhancement, plays an important role in the expansion of surface-enhanced Raman scattering (SERS) spectroscopy to a powerful, quantitative, and noninvasive measurement technique for analytical applications. In this paper, a novel method for the fabrication of SERS-active substrates by laser treatment of 20, 40, and 60 nm thick gold and of 40 nm thick silver films supported on quartz glass is presented. Single 308 nm UV-laser pulses were applied to melt the thin gold and silver films. During the cooling process of the noble metal, particles were formed. The particle size and density were imaged by atomic force microscopy. By varying the fluence, the size of the particles can be controlled. The enhancement factors of the nanostructures were determined by recording self-assembled monolayers of benzenethiol. The intensity of the SERS signal from benzenethiol is correlated to the mean particle size and thus to the fluence. Enhancement factors up to 10(6) with a high reproducibility were reached. Finally we have analyzed the temperature dependence of the SERS effect by recording the intensity of benzenethiol vibrations from 300 to 120 K. The temperature dependence of the SERS effect is discussed with regard to the metal properties.

Detection of explosives based on surface-enhanced Raman spectroscopy.

In this study we present a device based on surface-enhanced Raman scattering (SERS) for the detection of airborne explosives. The explosives are resublimated on a cooled nanostructured gold substrate. The explosives trinitrotoluene (TNT) and triacetone triperoxide (TATP) are used. The SERS spectrum of the explosives is analyzed. Thus, TNT is deposited from an acetonitrile solution on the gold substrate. In the case of TATP, first the bulk TATP Raman spectrum was recorded and compared with the SERS spectrum, generated by deposition out of the gas phase. The frequencies of the SERS spectrum are hardly shifted compared to the spectrum of bulk TATP. The influence of the nanostructured gold substrate temperature on the signals of TATP was studied. A decrease in temperature up to 200 K increased the intensities of the TATP bands in the SERS spectrum; below 200 K, the TATP fingerprint disappeared.

Temperature- and pressure-dependent midinfrared absorption cross sections of gaseous hydrocarbons.

Transmittance spectra of four gaseous hydrocarbons were measured by using a Fourier transform infrared spectrometer. The analyzed substances are propane, n-butane, ethanol, and iso-octane (2,2,4-trimethyl-pentane). Mixtures of hydrocarbons and nitrogen were prepared and analyzed in an optical cell between 298 and 473 K at pressures up to 1800 kPa. Molecule specific absorption cross sections were calculated for different temperatures and pressures that are relevant for technical absorption measurements. Dependences of the spectral absorption cross sections, as well as the integrated absorption cross sections on temperature and pressure, were investigated.

Micro-flow analysis by molecular tagging velocimetry and planar Raman-scattering.

The two dimensional molecular tagging velocimetry (2D-MTV) has been used to measure velocity fields of the flow in a micro mixer. Instead of commonly used micro particles an optical tagging of the flow has been performed by using a caged dye. The pattern generation is done by imaging a mask for the first time. This allows to generate nearly any imaginable pattern. The flow induces a deformation of the optically written pattern that can be tracked by laser induced fluorescence. The series of raw images acquired in this way were analyzed quantitatively with a novel optical flow based technique. The reference measurements have been carried out allowing to draw conclusions about the accuracy of this procedure. A comparison to the standard technique of µPIV has also been conducted. Apart from measuring flow velocities in microfluidic mixing processes, the spatial distribution of concentration fields for different species has also been measured. To this end, a new technique has been developed that allows spatial measurements from Planar Spontaneous Raman Scattering (PSRS). The Raman stray light of the relevant species has been spectrally selected by a narrow bandpass filter and thus detected unaffectedly by the Raman stray light of other species. The successful operation of this measurement procedure in micro flows will be demonstrated exemplary for a mixing process of water and ethanol.

Simultaneous spatial and spectral imaging of lasing droplets.

We present an experimental technique that allows the simultaneous spatial imaging and spectral analysis of falling droplets that exhibit lasing. Single droplet investigations serve as, among other purposes, a preliminary study for spray and combustion researchers. The described setup provides a valuable tool for the evaluation of microdroplet investigations with laser-spectroscopic techniques that rely on laser-induced fluorescence (LIF) or similar spectroscopical phenomena. The emphasis is that both spatial and spectral information are obtained from single-shot images of a falling droplet. Furthermore, combining spatial imaging and a spatially resolving optical multichannel analyzer makes a pointwise rastering of the droplets spectrum possible. This allows for the (almost) unambiguous determination of sources of influence on the spectrum of these droplets-such as geometrical distortion and lasing, nondissolved tracer lumps, and similar phenomena. Although the focus is on the experimental technique itself, we supplement detailed studies of lasing in falling microdroplets. These results were obtained with the aim of developing a system for measuring temperature distributions in droplets and sprays. In the light of these results the practice of calibrating a droplets spectrum by use of a bulk liquid sample needs to be critically reviewed.