Occurrence of ochratoxin A in poultry feeds and feed ingredients from Pakistan.

A study was conducted to evaluate the occurrence of ochratoxin A (OTA) in complete poultry feeds (n=80) and poultry feed ingredients (n=286) from Pakistan. All samples were first analyzed by indirect enzyme linked immunosorbent assay (ELISA), samples with OTA concentrations above the European Union maximum regulatory limit (MRL, 100 µg/kg) were further confirmed by HPLC-FLD. Contamination frequency and mean OTA levels were 31% and 51 µg/kg in feed ingredients, and the corresponding values for complete feeds were 38% and 75 µg/kg. Ten samples of complete poultry feed and 19 samples of feed ingredients contained OTA at levels higher than the MRL. The results of the present study indicate that there is a strong need for a more intense monitoring programs for OTA in poultry feed.

Natural co-occurrence of aflatoxins and deoxynivalenol in poultry feed in Pakistan.

Two hundred and fifteen broiler poultry feed samples were analysed over the time period of one year for the co-occurrence of aflatoxins and deoxynivalenol (DON). These were determined by GC-MS and ELISA, respectively. LOD values for aflatoxins and DON were 0.5 and 5 µg/kg, respectively. From all investigated 215 poultry feed samples, aflatoxins and DON co-occurred in 100 samples (46%). DON was detected in 114 samples while 100 samples also were positive for aflatoxins. Mean concentrations of positive samples for aflatoxins and DON were 18 and 807 µg/kg, respectively. Twenty-one DON-positive and 42 aflatoxin positive samples were contaminated above the EU maximum legal limits of 1000 µg/kg and 20 µg/kg, respectively. The present study provided useful data on aflatoxin and DON contamination, which may be helpful for future strategies to control contamination and to formulate standards in poultry feeds.

Core-shell molecularly imprinted polymer-based solid-phase microextraction fiber for ultra trace analysis of endosulfan I and II in real aqueous matrix through gas chromatography-micro electron capture detector.

In this study, core-shell molecularly imprinted polymer selective for endosulfan I and II was prepared by copolymerization of Fe3O4@SiO2-methacrylamide composites and N,N'-methylene-bis-acrylamide. The synthesized polymer was thoroughly characterized by FT-IR, TGA, and SEM. The adsorption properties of the MIP and NIP were demonstrated by equilibrium rebinding experiments, pseudo-second-order kinetic model, LF-isotherm and Scatchard analysis. The competitive recognition studies were performed with endosulfan I and II and structurally similar compounds: aldrin, dieldrin and heptachlor. The imprinting factors (IF) of endosulfan I and II were found to be 10.1 and 9.1, respectively, which were much higher than the imprinting factors (IF) of other cyclodienes. The imprinted polymer was then coated on stainless steel wire to develop an easy and simple laboratory made solid phase microextraction device for selective extraction of endosulfan I and II from water samples of environmental importance. Also the main parameters influencing coating of fiber and microextraction procedure were investigated and optimized using Plackett-Burman and Central Composite designs. The developed method was thoroughly validated for its linearity, selectivity, precision and accuracy. The developed MISPME method's linearity ranged from 7 to 5×10(3)ngl(-1) (R(2)=0.999) and from 10 to 5×10(3)ngl(-1) (R(2)=0.999) for endosulfan I and II, respectively. The limits of detection for endosulfan I and II were found to be 2ngl(-1) and 3ngl(-1), respectively. However, the limits of quantification for endosulfan I and II were 7ngl(-1) and 10ngl(-1), respectively.

Preparation and characterization of molecularly imprinted polymer for di(2-ethylhexyl) phthalate: application to sample clean-up prior to gas chromatographic determination.

The molecularly imprinted polymer (MIP) selective for di(2-ethylhexyl) phthalate (DEHP) an environmental endocrine disruptor was prepared by suspension polymerization using methacrylamide as functional monomer and N,N'-methylene-bis-acrylamide as cross-linker. The imprinted polymer was employed for solid-phase extraction of DEHP from water samples of environmental importance and characterized by FT-IR and SEM. The adsorption properties of the imprinted polymer were demonstrated by equilibrium rebinding experiments, Pseudo-second-order kinetic model, Sips isotherm and Scatchard analysis. The reusability of MIP was checked for at least six repeated batch adsorption cycles and the results showed almost no deterioration in the adsorption capacity. The competitive recognition studies were performed with DEHP and structurally similar compounds; dimethyl phthalate (DMP), diethyl phthalate (DEP), and dibutyl phthalate (DBP). The imprinting factor (IF) of DEHP was found to be 12.86 which was much higher than the imprinting factors (IF) of other phthalates. A method constituted by molecularly imprinted solid-phase extraction (MISPE) with GC-FID was developed for DEHP analysis in water samples under very simple conditions. Sample loading and desorption conditions were also optimized. The MISPE method's linearity ranged from 0.035 to 3.0 µg ml⁻¹ with r² = 0.9998. Intra-assay, interassay precision and accuracy ranged from 0.0168% to 1.017%, 1.130% to 4.799% and 94.98% to 99.35%, respectively. The LOD and LOQ were found to be 0.011 and 0.035 µg ml⁻¹, respectively. Synthesized MIP was employed in MISPE for cleaning up the spiked river water samples prior to gas chromatographic analysis. The river samples were found to contain DEHP in the range of 1.4 × 10⁻³ to 0.349 µg ml⁻¹.

Assessment of pesticide residues in commonly used vegetables in Hyderabad, Pakistan.

The aim of present study was to assess pesticide residues in vegetables in the Hyderabad region of Pakistan. The concentrations of six pesticides were determined by gas chromatography coupled with mass selective detector (GC-MSD) in locally produced vegetables purchased from wholesale markets. A total of 200 samples of eight vegetables viz. cauliflower, green chilli, eggplant, tomato, peas, bitter gourd, spinach and apple gourd were analyzed for pesticide residues. The results indicated that almost all samples were contained pesticides, only 39% contained pesticide residues at or below maximum residue limits (MRLs), and 61% contained pesticide residues above MRLs. From the six analyzed pesticides, carbofuran and chlorpyrifos were found above to MRLs with concentrations ranging from 0.01-0.39 and 0.05-0.96 mg/kg, respectively. The results provided important information on the current pesticide contamination status of some commonly used vegetables and pointed an urgent need to control the use of some excessively applied and potentially persistent pesticides, such as carbofuran and chlorpyrifos.

Simultaneous assessment of zinc, cadmium, lead and copper in poultry feeds by differential pulse anodic stripping voltammetry.

In the present work four metals (Zn, Cd, Pb and Cu) were determined simultaneously in 28 commercial broiler poultry feeds by differential pulse anodic stripping voltammetry (DPASV) using hanging mercury drop electrode (HMDE). The digestion of poultry feeds was carried out with concentrated nitric acid and hydrogen peroxide (2:1) with the help of microwave heating. Acetate buffer of pH 5 was used as a supporting electrolyte. The limit of detection for Zn, Cd, Pb and Cu was 0.69, 0.35, 0.68 and 0.24 microg/kg, respectively. The amount of Zn, Cd, Pb and Cu in the analyzed poultry feeds was ranged between 54.3-482.2, 3.8-33.6, 23.2-32.6 and 12.3-65.8 mg/kg, respectively. In most of analyzed poultry feed samples, the amount of Cd and Pb was found to be greater than the maximum tolerable level (MTL) which could be harmful for the poultry.

An excellent fluoride sorption behavior of modified amberlite resin.

The article describes a convenient method for the modification of Amberlite XAD-4 resin by introducing thio-urea binding sites onto the aromatic rings. The modified (ATU) resin has been employed for the quantitative sorption of fluoride ions in batch as well as column experiments. The parameters (i.e. pH, contact time, etc.) were optimized and desorption of fluoride ions was fulfilled by using 0.01 M HCl solution. The equation isotherms such as Langmuir, Freundlich, Dubinin-Radushkevich (D-R) and Temkin were also successfully applied to model the experimental data. The sorption capacity of the ATU resin was found as 3.286 mmol g(-1). From the D-R isotherm parameters, it has been calculated that the uptake of fluoride ion by ATU resin occurs through ion exchange sorption mechanism. The study will contribute toward the remediation of fluoride polluted areas as well as in the various fields of materials science.

An economically viable method for the removal of selected divalent metal ions from aqueous solutions using activated rice husk.

Biosorption of divalent metal ions, i.e. Pb(II), Cd(II), Zn(II) and Cu(II) onto rice husk activated (RHA) is investigated over pH range (1-10) via batch adsorption technique. The chemical and thermal activation of rice husk with 0.1M HNO(3) and 1M K(2)CO(3) at 473 K enhanced the removal efficiency of RHA (35+/-2.1-99+/-0.5%, 33+/-1.2-97+/-0.6%, 32+/-1.3-96+/-0.8% and 28+/-1.8-95+/-0.9% before and after treatment, respectively). The surface area analysis of RHA by BET (Brunauer, Emmett and Teller) nitrogen adsorption method provided pore area and average pore diameter to be 542+/-2.3m(2)g(-1) and 1076+/-5.6 nm respectively. SEM and FTIR analyses of RHA were carried out to determine the surface morphology and functional groups involved in metal binding mechanism, respectively. The adsorption equilibrium was well described by Freundlich, Langmuir and Dubinin-Radushkevish (D-R) isotherm models by employing (4.8-48, 8.9-89, 15.3-153 and 15.7-157)x10(-5)M solution concentrations of sorbates, respectively, at equilibrium time of 20 min at pH 6 and onto 0.2g of sorbent. The kinetics of mass transfer and intra-particle diffusion for metal ions sorption onto RHA were studied with Lagergren and Morris-Weber kinetic models. The numerical values of thermodynamic parameters indicated the exothermic nature, spontaneity and feasibility of the sorption process. The desorption study of metal components from RHA surface was carried out with 0.1M HCl. The sorption mechanism developed illustrates the strong interactions of sorbates with the active sites of the sorbent coupled with efficient and environmentally clean exploitation of rice waste product.

Removal of fluoride from aqueous environment by modified Amberlite resin.

Fluoride in drinking water above permissible level is responsible for human being affected by skeletal fluorosis. In this study, Amberlite XAD-4 has been modified by introducing amino group onto the aromatic ring for its application in fluoride remediation. Characterization of the modified resin was made by, FT-IR and elemental analysis (CHNS) techniques. The pH 9 was optimum value for quantitative sorption of fluoride in both batch and column experiments. The desorption of fluoride was achieved by using 10% HCl. The batch and column sorption studies of fluoride with modified resin were carried out to evaluate sorption isotherms too. Thus equation isotherms such as Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) were successfully used to model the experimental data. The sorption capacity of modified Amberlite XAD-4 resin was found as 5.04 x 10(-3) mol g(-1). From the D-R isotherm parameters, it has been evaluated that the uptake of fluoride by modified resin occurs through ion exchange adsorption mechanism. The study will contribute toward the removal of fluoride from the aqueous environment as well as in the field of analytical and environmental chemistry.

Quantitative separation of oxytocin, norfloxacin and diclofenac sodium in milk samples using capillary electrophoresis.

A simple, sensitive and rapid method has been developed for simultaneous separation and quantification of three different drugs: oxytocin (OT), norfloxacin (NOR) and diclofenac (DIC) sodium in milk samples using capillary electrophoresis (CE) with UV detection at 220 nm. Factors affecting the separation were pH, concentration of buffer and applied voltage. Separation was obtained in less than 9 min with sodium tetraborate buffer of pH 10.0 and applied voltage 30 kV. The separation was carried out from uncoated fused silica capillary with effective length of 50 cm with 75 microm i.d. The carrier electrolyte gave reproducible separation with calibration plots linear over 0.15-4.0 microg/mL for OT, 5-1000 microg/mL for NOR and 3-125 microg/mL for DIC. The lower limits of detection (LOD) were found to be 50 ng/mL for OT, and 1 microg/mL for NOR and DIC. The method was validated for the analysis of drugs in milk samples and pharmaceutical preparations with recovery of drugs within the range 96-100% with RSD 0.9-2.8%.

Synthesis and application of a highly efficient tetraester calix[4]arene based resin for the removal of Pb2+ from aqueous environment.

The present study describes the Pb(2+) sorption potential of newly synthesized tetraester calix[4]arene (TC4) based resin from aqueous media. The TC4 resin was synthesized through diazotization reaction of TC4 with Amberlite XAD-4 in the presence of sodium nitrite in acidic medium. The TC4 resin was characterized by using different analytical techniques such as FT-IR, elemental analysis and scanning electron microscopy (SEM). The Pb(2+) removal ability of the resin from the aqueous environment has been evaluated by both batch adsorption as well as column studies. The experiments have been conducted involving the determination of effect of pH, adsorbate concentration, adsorbent dosage, contact time and temperature. Moreover, on the basis of kinetic studies, the pseudo-first-order and pseudo-second-order adsorption kinetics were calculated. The thermodynamic parameters of lead adsorption were also calculated. Equation isotherms such as Langmuir (L), Freundlich (F), and Dubinin-Radushkevich (D-R) were successfully used to model the experimental data. From the D-R isotherm parameters, it was considered that the uptake of Pb(2+) by TC4 resin is ion exchange mechanism. From the results it has been found that the TC4 resin is a versatile adsorbent for the removal of Pb(2+) from the aqueous environment. The study also confers its impact on human health, reinstate of polluted sites and other fields of material science.

Synthesis, characterization and antioxidant activity copper-quercetin complex.

Quercetin (3,3',4',5,7-pentahydroxyflavone) one of the most abundant dietary flavonoids, has been investigated in the presence of Cu(II) in methanol. The spectroscopic studies (UV-vis, (1)H NMR and IR) were useful to assess the relevant interaction of Quercetin with Cu(II) ions, the chelation sites and dependence of the complex structure from the metal/ligand ratio. A 1:2 (L:M) complex was indicated by Job's method of continuous variation, which was applied to ascertain the stoichiometric composition of the complex. The antioxidant activities of the compounds were evaluated by using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging method. The complexed flavonoid was much more effective free radical scavengers than the free flavonoids.

Sorption of organophosphorous pesticides onto chickpea husk from aqueous solutions.

The sorption efficiency of chickpea husk of black gram variety (BGH), for the removal of organophosphorous pesticides (OPPs), i.e. triazophos (TAP) and methyl parathion (MP) from aqueous media has been investigated. Optimization of operating sorption parameters, i.e. particle size, sorbent dose, agitation time, pH, initial concentration of sorbates, and temperature has been studied. The sorption data fitted well to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms. The maximum sorption capacities of BGH for TAP and MP were calculated to be 3.5+/-0.45 and 10.6+/-0.83 mmol g(-1) by Freundlich, 0.0077+/-0.021 and 0.025+/-0.0094 mmol g(-1) by Langmuir and 0.48+/-0.037 and 0.15+/-0.077 mmol g(-1) by D-R isotherms respectively, employing 0.2g of sorbent, at pH 6, 90 min agitation time and at 303 K. Application of first order Lagergren and Morris-Weber equations to the kinetic data yielded correlation coefficients, close to unity and showed partial intra-particle diffusion. The negative values of thermodynamic parameters, i.e. DeltaH (kJ mol(-1)), DeltaS (J mol(-1) K(-1)) and DeltaG (kJ mol(-1)) indicate the exothermic and spontaneous nature of the sorption process. The sorbed pesticides were recovered by sonication with methanol, making the regeneration and reutilization of the sorbents promising. The investigated sorbent exhibited potential applications in water decontamination, treatments of industrial and agricultural waste waters and thus productively demonstrated viable use of agricultural waste material.

Utilization of organic by-products for the removal of organophosphorous pesticide from aqueous media.

Sorption potential of rice (Oryza sativa) bran and rice husk for the removal of triazophos (TAP), an organophosphate pesticide, has been studied. The specific surface area were found to be 19+/-0.7 m(2)g(-1) and 11+/-0.8m(2)g(-1) for rice bran and rice husk, respectively. Rice bran exhibited higher removal efficiency (98+/-1.3%) than rice husk (94+/-1.2%) by employing triazophos solution concentration of 3 x 10(-5) M onto 0.2 g of each sorbent for 120 min agitation time at pH 6 and 303 K. The concentration range (3.2-32) x 10(-5) M was screened and sorption capacities of rice bran and rice husk for triazophos were computed by different sorption isotherms. The energy of sorption for rice bran and rice husk was assessed as 14+/-0.1 and 11+/-0.2 kJ mol(-1) and kinetics of the sorption is estimated to be 0.016+/-0.002 and 0.013+/-0.002 min(-1), respectively. Intraparticle diffusion rate was computed to be 4+/-0.8 and 4+/-0.9 nmol g(-1)min(-1/2). Thermodynamic constants DeltaH, DeltaS and DeltaG at varying temperatures (283-323 K) were also calculated.

Use of modified sorbent for the separation and preconcentration of chromium species from industrial waste water.

A simple and sensitive method based on solid phase extraction (SPE) on acetyl acetone modified XAD-16 has been established for separation of Cr (III) and Cr (VI) from and industrial water samples. Two forms of chromium showed different exchange capacities at different pH values, viz. Cr (III) selectively retained at pH 5-7 whereas Cr (VI) retained at pH 1. Hence complete separation of the two forms of chromium is possible. Retained species were eluted with 5 mL of 2 mol L(-1) HNO(3) and 2 mol L(-1) NaOH. The detection limit of 0.02 and 0.014 microg mL(-1) was achieved for Cr (III) and Cr (VI), respectively, with an enrichment factor of 100 and 140. Various kinetic and thermodynamic parameters were also determined. The metal ion concentration was measured by atomic Absorption Spectroscopy. The possible retention mechanism is also discussed. The method was successfully applied for the speciation of chromium in industrial water samples.

Antioxidant potential of commercially available cumin (Cuminum cyminuml inn) in Pakistan.

Owing to increased safety concerns about synthetic antioxidants, exploitation of safer antioxidants based on natural origin is the focus of research nowadays. Cumin is a common spice and is used as a routine supportive cooking agent. Extracts of cumin were prepared in methanol, ethanol, dichloromethane and hexane by employing Soxhlet extraction apparatus. Determination of the total phenolic content, chelating activity, reducing power and free radical scavenging activity were taken as parameters for the assessment of antioxidant properties. The findings of this study suggest cumin to be a potent source of antioxidants. Results from the different parameters were in agreement with one another.

Characterization of banana peel by scanning electron microscopy and FT-IR spectroscopy and its use for cadmium removal.

This study describes the use of banana peel, a commonly produced fruit waste, for the removal of Cd(II) from environmental and industrial wastewater. The banana peel was characterized by FT-IR and scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) analysis. The parameters pH, contact time, initial metal ion concentration and temperature were investigated and found to be rapid ( approximately 97% within 10 min). The Langmuir adsorption isotherm was used to describe partitioning behavior for the system at room temperature. The value of Q(L) was found to be (35.52 mg g(-1)) higher than the previously reported materials. The binding of metal ions was found to be pH-dependent with the optimal sorption occurring at pH 8. The retained species were eluted with 5 mL of 5 x 10(-3)M HNO(3) with the detection limit of 1.7 x 10(-3)mg L(-1). Kinetics of sorption followed the pseudo-first-order rate equation with the rate constant k, equal to 0.13+/-0.01 min(-1). Thermodynamic parameters such as Gibbs free energy at 303K (-7.41+/-0.13 kJ mol(-1)) and enthalpy (40.56+/-2.34 kJ mol(-1)) indicated the spontaneous and endothermic nature of the sorption process. The developed method was utilized for the removal of Cd(II) ions from environmental and industrial wastewater samples using flame atomic absorption spectrophotometer (FAAS).

Application of microwave heating for the fast extraction of fat content from the poultry feeds.

A rapid method has been developed to extract and quantitatively measure the total oil content in poultry feeds using a domestic microwave oven. The optimized extraction procedure involves the replicate (6x) extraction of 5 g of ground feed with 12 ml of hexane for 20 s in a 900 W oven. Each replicate involves the collection of the resulting miscella and its replacement with fresh solvent for re-extraction. The collected extracts were centrifuged and transferred to a vial. The solvent was evaporated to a constant weight and the residual lipid weighed. In comparison to conventional Soxhlet extraction method, lipid contents obtained using the optimized microwave procedure was not significantly different. However, FTIR analysis indicated that the microwave procedure was superior in minimizing the formation of free fatty acids (FFA) relative to the Soxhlet procedure if the temperature of the sample was kept within the range of 45-50 degrees C. This simple, sequential extraction procedure is rapid, highly efficient and provides a simple mean of quantitating the lipid content of poultry feed in less than 40 min without the need for specialized microwave oven.

Intramuscular fatty acid profile of longissimus dorsi and semitendinosus muscle from Pateri goats fed under traditional feeding system of Sindh, Pakistan.

The present study was undertaken to assess the intramuscular fatty acid composition of different muscles taken from male Pateri (n=15) goats, reared on naturally grown grasses, leaves and pods of Acacia nilotica and crushed cereal, under traditional way of feeding. Goats were slaughtered with an average weight of 68±7kg and age 12±1 month. The samples were taken from longissimus dorsi region (between the 12th and 13th rib) and distal region of semitendinosus muscle. Results of total fat content and fatty acids composition does not show significant (P>0.05) variation among muscles investigated. The fatty acid composition of muscles studied were primarily composed of oleic (31.50-33.38%), followed by palmitic acid (19.84-22.05%) and stearic acid (22.25-24.91%) respectively. Muscle tissue in general contained an average 51.13% of saturated fatty acids and 48.87% of unsaturated fatty acids. The mean conjugated linoleic acid was found 0.41%, 0.43% and 0.47% in ribeye and loin portion of longissimus dorsi muscle and distal region of semitendinosus muscle, respectively.

GC-MS quantification of fatty acid profile including trans FA in the locally manufactured margarines of Pakistan.

Ten margarine brands of Pakistan were analyzed for their fatty acid composition with emphasis on trans fatty acids (TFA) using GC-MS. Saturated, cis-monounsaturated and polyunsaturated fatty acids were present at 24.2-58.1, 5.7-35.4 and 3.8-37.4% of total fatty acids, respectively. Among the saturated fatty acids, palmitic acid (16.9-33.8%) was dominant in all analyzed margarine brands and its higher amount indicates that palm oil was a major contributor in the margarine manufacturing. Among samples tested only one contained a low level of TFA (2.2%) while the rest contained very high amounts of TFA (11.5-34.8%) which clearly shows that hydrogenated oils were used in the formulation of margarines. Fatty acid profiles demonstrated that all samples belong to the hard margarine category containing high amounts of trans and saturated fatty acids which is an alarming issue for the health of consumers.