Rectourethral Fistula after Posterior Urethral Valves Ablation in an Infant: A Rare Complication.

Acquired rectourethral fistula (RUF) is a rare but major complication of posterior urethral valve ablation. We present a case of a 1-year-old boy managed in a staged manner by completion of posterior urethral valves ablation, colostomy, RUF division through anterior sagittal transanorectal approach, and stoma closure. The child is continent for urine and feces.

Chemical characterization, source identification and potential health effects of PM2.5-bound non-polar organic compounds over a COALESCE network site - Bhopal, India.

Year-long (2019) measurements of carbonaceous aerosols were performed at Bhopal, a regionally representative site as a part of the COALESCE (Carbonaceous Aerosol Emissions, Source apportionment and Climate Impacts) campaign. Aerosol-associated non-polar organic compounds (NPOCs) were analysed using thermal desorption (TD) Gas chromatography/Mass spectrometry (TD-GC/MS). The annual average of the total organic carbon (OC), elemental carbon (EC), and analysed PAHs (Polycyclic Aromatic Hydrocarbons), and n-alkanes were, 9.74 ± 9.47 µg m-3, 2.13 ± 3.12 µg m-3, 10.43 ± 5.49 ng m-3, and 114.93 ± 49.24 ng m-3, respectively. PAHs diagnostic ratios suggested emissions from petroleum, grass, wood, and coal combustion. Combustion derived PAHs (CombPAHs) accounted for 72.5 % of the total measured PAHs. During wintertime, based on Pyr/BaP ratio (∼0.6), gasoline exhaust emissions were higher compared to diesel exhaust emissions. The weak correlations between PAHs and meteorological parameters suggested that variations in PAH levels are primarily driven by alterations in emission sources. Total PAHs were correlated moderately with BrC (r2 = 0.60). The estimated lifetime lung cancer risk (LLCR) values on exposure to 16 USEPA priority PAHs (5 × 10-5) demonstrated that PAH levels in this region pose moderate health risks. Given observations from only campaign mode short-term measurements of NPOCs over India, this work provides a more comprehensive understanding of the concentrations, seasonal variations, and sources of n-alkanes and health risk associated with particle bound PAHs over the data-poor central Indian region.

Characterization of fine particulate matter water-soluble inorganic ions and estimation of aerosol acidity at three COALESCE network sites - Mysuru, Bhopal, and Mesra - in India.

The study was carried out to understand the chemical, spatiotemporal characteristics of water-soluble inorganic ions (WSIIs), their association with PM2.5 mass, and aerosol acidity in three COALESCE (carbonaceous aerosol emissions, source apportionment, and climate impacts) network sites of India (Mesra - Eastern India, Bhopal - Central India and Mysuru - Southern India). Alternate-day 24-h integrated bulk PM2.5 samples were collected during 2019 along with on-site meteorological parameters. Annual average PM2.5 concentrations were 67 ± 46 µg m-3, 54 ± 47 µg m-3, and 30 ± 24 µg m-3 at Mesra, Bhopal, and Mysuru, respectively. PM2.5 concentrations exceeded the annual mean (40 µg m-3) recommended by the National Ambient Air Quality Standards (NAAQS) at Mesra and Bhopal. WSIIs existed in PM2.5 mass at Mesra (50.5%), Bhopal (39.6%), and Mysuru (29.2%). SO42-, NO3-, and NH4+ (SNA) were major secondary inorganic ions in total WSIIs, with an annual average of 88.4% in Mesra and 82.0% in Bhopal 78.4% in Mysuru. Low NO3-/SO42- ratios annually at Mesra (0.41), Bhopal (0.44), and Mysuru (0.24) indicated that stationary sources dominated vehicular emissions (1.0). Aerosol acidity varied from region to region and season to season depending on the presence of NH4+, the dominant counter-ion to neutralize anions. Aerosols were near-neutral or alkaline at all three sites, except during the pre-monsoon season in Mysuru. An assessment of neutralization pathways for major anions [SO42- + NO3-] suggests that they mainly existed as sulfate and nitrate salts such as ammonium sulfate ((NH4)2SO4) and ammonium bisulfate (NH4HSO4) in conjunction with ammonium nitrate (NH4NO3).

PM2.5 carbonaceous components and mineral dust at a COALESCE network site - Bhopal, India: Assessing the impacts of COVID-19 lockdowns on site-specific optical properties.

Thermal elemental carbon (EC), optical black carbon (BC), organic carbon (OC), mineral dust (MD), and 7-wavelength optical attenuation of 24-hour ambient PM2.5 samples were measured/estimated at a regionally representative site (Bhopal, central India) during a business-as-usual year (2019) and the COVID-19 lockdowns year (2020). This dataset was used to estimate the influence of emissions source reductions on the optical properties of light-absorbing aerosols. During the lockdown period, the concentration of EC, OC, BC880 nm, and PM2.5 increased by 70 % ± 25 %, 74 % ± 20 %, 91 % ± 6 %, and 34 % ± 24 %, respectively, while MD concentration decreased by 32 % ± 30 %, compared to the same time period in 2019. Also, during the lockdown period, the estimated absorption coefficient (babs) and mass absorption cross-section (MAC) values of Brown Carbon (BrC) at 405 nm were higher (42 % ± 20 % and 16 % ± 7 %, respectively), while these quantities for MD, i.e., babs-MD and MACMD values were lower (19 % ± 9 % and 16 % ± 10 %), compared to the corresponding period during 2019. Also, babs-BC-808 (115 % ± 6 %) and MACBC-808 (69 % ± 45 %) values increased during the lockdown period compared with the corresponding period during 2019. It is hypothesized that although anthropogenic emissions (chiefly industrial and vehicular) reduced drastically during the lockdown period compared to the business-as-usual period, an increase in the values of optical properties (babs and MAC) and concentrations of BC and BrC, were likely due to the increased local and regional biomass burning emissions during this period. This hypothesis is supported by the CBPF (Conditional Bivariate Probability Function) and PSCF (Potential Source Contribution Function) analyses for BC and BrC.

PM2.5 carbonaceous components and mineral dust at a COALESCE network site - Bhopal, India: Estimating site-specific optical characteristics.

Atmospheric PM2.5 thermal elemental carbon (EC), optical black carbon (BC), brown carbon (BrC), and mineral dust (MD) were characterized during a field campaign at a regionally representative site (Bhopal, central India) all year-long during 2019. In this study, the optical characteristics of PM2.5 during 'EC-rich', 'OC-rich', and 'MD-rich' days were used in a three-component model to estimate site-specific Absorption Ångström exponent (AAE) and absorption coefficient (babs) of light-absorbing PM2.5 constituents. The AAE for 'EC-rich', 'OC-rich', and 'MD-rich' days were 1.1 ± 0.2, 2.7 ± 0.3, and 3.0 ± 0.9, respectively. The percentage contribution of calculated babs of EC, BrC, and MD to the total babs at 405 nm was dominated by EC during the entire study period (EC; 64 % ± 36 %, BrC: 30 % ± 5 %, MD: 10 % ± 1 %). Further, site-specific mass absorption cross-section (MAC) values were calculated to assess the impact of their use over the use of manufacturer-specified MAC values in estimating BC concentrations. The r2 between thermal EC and optical BC was higher (r2 = 0.67, slope = 1.1) when daily site-specific MAC values were used rather than using the default MAC value (16.6 m2 g-1; r2 = 0.54 and slope = 0.6). Overall, had the default MAC880 been used instead of the site-specific values, we would have underestimated the BC concentration by 39 % ± 18 % during the study period.

Mass, composition, and sources of particulate matter in residential and traffic sites of an urban environment.

Present study aims to assess the mass, composition, and sources of PM10 and PM2.5 (particulate matter having aerodynamic diameter less than or equal to 10 and 2.5 µm aerodynamic diameter, respectively) in Vellore city. Seasonal samples collected in traffic and residential sites were analyzed for ions, elements, organic carbon (OC), and elemental carbon (EC). Source apportionment of PM10 and PM2.5 is carried out using Chemical Mass Balance, Unmix, Positive Matrix Factorization and Principal Component Analysis receptor models. Results showed that traffic site had higher annual concentration (PM2.5 = 62 ± 32 and PM10 = 112 ± 23 µg m-3) when compared to residential site (PM2.5 = 54 ± 22 and PM10 = 98 ± 20 µg m-3). Al, Ca, Fe, K, and Mg known to have crustal origin dominated the element composition irrespective of PM size and sampling site. Among ions, SO42- accounted highest in both sites with an average of 70 and 60% to PM2.5 and PM10 ionic mass. Elemental carbon contribution to PM mass was found highest in traffic site (PM2.5 = 17 to 23% and PM10 = 8 to 10%) than residential site (PM2.5 = 9 to 17% and PM10 = 4 to 8%). Elements, ions, OC, and EC accounted 12, 28, 34, and 16% of PM2.5 mass and 12, 21, 20, and 8% of PM10 mass, respectively. Different sources identified by the receptor models are resuspended road dust, crustal material, secondary aerosol, traffic, non-exhaust vehicular emissions, secondary nitrate, construction, cooking, and biomass burning. Since Vellore is aspiring to be a smart city, this study can help the policymakers in effectively curbing PM.

Tracing the predominant sources of carbon in PM2.5 using δ13C values together with OC/EC and select inorganic ions over two COALESCE locations.

As part of the COALESCE (Carbonaceous Aerosol Emissions, Source apportionment and Climate Impacts) campaign, ambient PM2.5 was collected at two regional sites (Bhopal and Mysuru) in India during 2019. We utilized organic carbon (OC), elemental carbon (EC) and water-soluble inorganic ions together with δ13C values, to better understand total carbon (TC) sources at these locations. The annual average δ13C values (-26.2 ± 0.6‰) at Mysuru and Bhopal (-26.6 ± 0.6‰) were comparable. However, at Mysuru, except during winter, day-to-day variability was much lower (narrow range of -26.8 to -26.0‰) than that at Bhopal (range: -28.1 to -24.7‰), suggesting that TC was contributed by few sources, likely dominated by vehicular emissions. Seasonal average δ13C values at Bhopal increased slightly (-25.8 ± 0.5‰) during the winter (Jan-Feb) and decreased (-27.0 ± 0.3‰) during the monsoon (Jun-Sep) season compared to the annual average. The decrease in δ13C values during the monsoon season was likely driven by enhanced secondary organic aerosol formation. Further, based on MODIS derived fire spots and back trajectories, we infered that the δ13C values (-27.5 to -26.0‰) in Bhopal during the post-monsoon season (Oct-Dec) were indicative of dominant biomass burning contributions. The inorganic ions/TC ratio during this season suggested that biomass burning aerosol was aged and may have been transported from crop residue burning in the Indo-Gangetic plains. At Mysuru, like the trend at Bhopal, the δ13C values during the monsoon season were lower than those during the winter season. Finally, δ13C values were input to a Bayesian model-MixSIAR to demonstrate the usefulness of such models in apportioning TC. In its simplest implementation, the model separated TC sources into fossil fuel emissions and non-fossil fuel sources . Fossil fuel combustion emissions accounted for 47 ± 19% and 62 ± 22% of the TC at Bhopal and Mysuru, respectively.

Evaluation of organic aerosol filter sampling artefacts and implications to gravimetric PM2.5 mass at a COALESCE network site - Bhopal, India.

Filter based PM2.5 samples are typically used to measure its chemical constituents. Such measurements are made in dense sampling networks to assess regulatory compliance and for source apportionment. Thus, quantifying sampling artefacts is crucial. In this study, 24-h integrated PM2.5 samples collected over Bhopal, India a COALESCE (CarbOnaceous AerosoL Emissions, Source apportionment and ClimatE impacts) site during 2019 and 2020, were used to estimate particulate organic carbon (OC) artefacts. Total OC and its thermal fractions (OC1, OC2, OC3, and OC4) measured on 349 bare quartz (Q) and QbQ filters each, were used to determine OC positive artefacts on quartz filters. 50 QbT (Quartz behind Teflon) filters in conjunction with the simultaneous QbQ samples (a subset of the total QbQ) were used to estimate OC volatilization from Teflon filters. On average, adsorbed gaseous OC contributed 17% and 11% to the measured total OC during 2019 and 2020, respectively. Further, the volatilization loss of organics from Teflon filter (used to quantify PM2.5 mass) ranged between 7% and 9%, and 5% and 6% of the PM2.5 mass during 2019 and 2020, respectively. The results of this study provide the first systematic long-term evaluation of thermal carbon fraction-wise sampling artefacts, estimates of organic volatilization losses from Teflon filters and their implications to PM2.5 mass closure, over a regionally representative location in India.

Examining the impact of sharing COVID-19 misinformation online on mental health.

Misinformation about the COVID-19 pandemic proliferated widely on social media platforms during the course of the health crisis. Experts have speculated that consuming misinformation online can potentially worsen the mental health of individuals, by causing heightened anxiety, stress, and even suicidal ideation. The present study aims to quantify the causal relationship between sharing misinformation, a strong indicator of consuming misinformation, and experiencing exacerbated anxiety. We conduct a large-scale observational study spanning over 80 million Twitter posts made by 76,985 Twitter users during an 18.5 month period. The results from this study demonstrate that users who shared COVID-19 misinformation experienced approximately two times additional increase in anxiety when compared to similar users who did not share misinformation. Socio-demographic analysis reveals that women, racial minorities, and individuals with lower levels of education in the United States experienced a disproportionately higher increase in anxiety when compared to the other users. These findings shed light on the mental health costs of consuming online misinformation. The work bears practical implications for social media platforms in curbing the adverse psychological impacts of misinformation, while also upholding the ethos of an online public sphere.

Northern Blotting Technique for Detection and Expression Analysis of mRNAs and Small RNAs.

Northern analysis is a conventional but gold standard method for detection and quantification of gene expression changes. It not only detects the presence of a transcript but also indicates size and relative comparison of transcript abundance on a single membrane. In recent years it has been aptly adapted to validate and study the size and expression of small noncoding RNAs. Here, we describe protocols employed in our laboratory for conventional northern analysis with total RNA/mRNA to study gene expression and validation of small noncoding RNAs using low molecular weight fraction of RNAs. A brief account on the recent advancements for improving the sensitivity and efficiency of northern blot detection is also included in this chapter.

Anti-paralytic medicinal plants - Review.

Paralysis is the loss of the ability of one or more muscles to move, due to disruption of signaling between the nervous system and muscles. The most common causes of paralysis are stroke, head injury, spinal cord injury (SCI) and multiple sclerosis. The search for cure of paralysis is yet to be found. Many ethnobotanical surveys have reported the use of medicinal plants by various ethnic communities in treating and curing paralysis. The present review discusses the use of medicinal plants in India for ameliorating and curing paralytic conditions, as well as discuses some of the important developments in future possible applications of medicinal plants in treatment of paralysis. This review reports the use of 37 medicinal plants for their application and cure of ailments related to paralysis. Out of the 37 plants documented, 11 plants have been reported for their ability to cure paralysis. However, the information on the documented plants were mostly found to be inadequate, requiring proper authentication with respect to their specificity, dosage, contradictions etc. It is found that despite the claims presented in many ethnobotanical surveys, the laboratory analysis of these plants remain untouched. It is believed that with deeper intervention on analysis of bioactive compounds present in these plants used by ethic traditional healers for paralysis, many potential therapeutic compounds can be isolated for this particular ailment in the near future.

Pulmonary Delivery of Anti-Tubercular Drugs Using Ligand Anchored pH Sensitive Liposomes for the Treatment of Pulmonary Tuberculosis.

BACKGROUND: Mycobacterium tuberculosis (M. TB) remains the prime cause of bacterial mortality and morbidity world-wide. Therefore, effective delivery and targeting of drug to the cellular tropics is essentially required to generate significant results for tuberculosis treatment. The aim of the present study was to develop and characterize ligand anchored pH sensitive liposomes (TPSL) as dry powder inhaler for the targeted delivery of drugs in the target site i.e. lungs. METHOD: Ligand anchored PSL (TPSL) was prepared by thin film hydration for the combined delivery of Isoniazid (INH) and Ciprofloxacin HCl (CIP HCl) using 4-aminophenyl-α-D mannopyranoside (Man) as surface functionalized ligand and characterized using different parameters. RESULTS: It was observed that size of the ligand anchored liposomes (TPSL) was slightly more than the non-ligand anchored liposomes (PSL). Drug release was studied at different pH for 24 hrs and it was observed that liposomes exhibited slow release at alkaline pH (58-64%) as compared to macrophage pH (81-87%) where it increased dramatically due to the destabilization of pH sensitive liposome (PSL). In vitro cellular uptake study showed that much higher concentration was achieved in the alveolar macrophage using ligand anchored liposomes as compared to its counterpart. In vivo study showed that maximum drug accumulation was achieved in the lung by delivering drug using ligand anchored PSL as compared to conventional PSL. CONCLUSION: It was concluded that ligand anchored pH sensitive liposome is one of the promising systems for the targeted drug therapy in pulmonary tuberculosis.

Stimuli-responsive hydrogels in drug delivery and tissue engineering.

Hydrogels are the three-dimensional network structures obtained from a class of synthetic or natural polymers which can absorb and retain a significant amount of water. Hydrogels are one of the most studied classes of polymer-based controlled drug release. These have attracted considerable attention in biochemical and biomedical fields because of their characteristics, such as swelling in aqueous medium, biocompatibility, pH and temperature sensitivity or sensitivity towards other stimuli, which can be utilized for their controlled zero-order release. The hydrogels are expected to explore new generation of self-regulated delivery system having a wide array of desirable properties. This review highlights the exciting opportunities and challenges in the area of hydrogels. Here, we review different literatures on stimuli-sensitive hydrogels, such as role of temperature, electric potential, pH and ionic strength to control the release of drug from hydrogels.

Pulmonary delivery of antitubercular drugs using spray-dried lipid-polymer hybrid nanoparticles.

The present study aimed to develop lipid-polymer hybrid nanoparticles (LPNs) for the combined pulmonary delivery of isoniazid (INH) and ciprofloxacin hydrochloride (CIP HCl). Drug-loaded LPNs were prepared by the double-emulsification solvent evaporation method using the three-factor three-level Box-Behnken design. The optimized formulation had a size of 111.81 ± 1.2 nm, PDI of 0.189 ± 1.4, and PDE of 63.64 ± 2.12% for INH-loaded LPN, and a size of 172.23 ± 2.31 nm, PDI of 0.169 ± 1.23, and PDE of 68.49 ± 2.54% for CIP HCl-loaded LPN. Drug release was found to be sustained and controlled at lower pH and followed the Peppas model. The in vitro uptake study in alveolar macrophage (AM) showed that uptake of the drugs was increased significantly if administered in the form of LPN. The stability study proved the applications of adding PLGA in LPN as the polymeric core, which leads to a much more stable product as compared to other novel drug delivery systems. Spray drying was done to produce an inhalable, dry, powdered form of drug-loaded LPN. The spray-dried (SD) powder was equally capable of producing nano-aggregates having morphology, density, flowability and reconstitutibility in the range ideal for inhaled drug delivery. The nano aggregates produced by spray drying manifested their aerosolization efficiency in terms of the higher emitted dose and fine particle fraction with lower mass median aerodynamic diameter. The in vivo study using pharmacokinetic and pharmacodynamic approaches revealed that maximum internalization efficiency was achieved by delivering LPN in SD powdered forms by pulmonary route.

Development and characterization of floating spheroids of atorvastatin calcium loaded NLC for enhancement of oral bioavailability.

OBJECTIVE: The obejctive of the present study was to investigate the potential use of floating spheroids of Atorvastatin Calcium (ATS) Loaded nanostructured lipid carriers (NLCs). MATERIALS AND METHODS: The final formula of floating spheroids was optimized on the basis of shape (spherical), diameter (0.47 mm), lag time (20 s), and floating time (> 32 h). RESULTS: The results were further confirmed by different pharmacokinetic parameters-it was observed that the developed optimized floating ATS spheroid-loaded NLCs formulation has significantly improved relative bioavailability, that is, 3.053-folds through oral route in comparison to marketed formulation.

Stimuli-sensitive systems--an emerging delivery system for drugs.

OBJECTIVES: Development of controlled and sustained drug delivery system (DDS) remains a great thrust of human beings for the successful delivery of drugs due to various drawbacks of existing systems. In order to overcome these drawbacks, various stimuli-sensitive DDSs were developed in the recent years. KEY FINDINGS: Stimuli are a state of responsiveness to sensory stimulation or excitability. Stimuli sensitive systems are those systems which deal with the changes in the physiology of body with respective to the environment changes. These systems may be very beneficial for the controlled and sustained delivery of drug in the body if proper work would be carried out on these types of systems. Controlled drug delivery became the standard criteria in modern pharmaceutical product design and an intensive research is still going on in achieving much better drug product with features like effectiveness, reliability, and safety. Many changes like photo and light, temperature, pH, ion, glucose, and redox affect the release of drug from the delivery system. These stimuli-sensitive systems are used for various purposes in various forms like in parenteral, ocular, peroral, rectal, vaginal, nasal, dermal and transdermal drug delivery. SUMMARY: Various literature surveys revealed that stimuli-sensitive DDSs can be explored as a potential tool for the delivery of a variety of macromolecules that are not effectively delivered by conventional techniques.

DEVELOPMENT AND CHARACTERIZATION OF GLUCOSE SENSITIVE HYDROGELS FOR THE TREATMENT OF DIABETES MELLIT.

Development of stimuli-sensitive hydrogels for the delivery of drug involves the development of matrices that are glucose-sensitive and have strong sensing properties so that the developed system can sense the level of glucose and release the medicament in response to blood glucose level. In the present study an attempt has been made to develop a glucose sensitive hydrogel system which modulates the release of an anti-diabetic drug in response to the blood glucose level in the body. The hydrogel system was prepared by gas foaming technique using chitosan and polyvinyl alcohol (PVA) as polymer and glutaraldehyde as cross-linking agent. Metformin was used as a drug candidate because of its short biological half life (6.25±0.5 hrs). The prepared glucose sensitive hydrogel system has characterized using different parameters. It was observed that hydrogel swelled and deswelled reversibly depending on the pH and glucose sensitivity of the medium and has suitable mechanical properties. In-vitro results showed that the enzymatically immobilized hydrogel was sensitive to both pH and glucose for effective release of drug. It was found that higher the concentration of glucose in the medium, higher the amount of drug released from the hydrogel. In vivo results showed that glucose oxidase leads to reduction in blood glucose level in response to variable glucose concentration in the body thus achieving the desired therapeutic levels in the body . The present study showed that glucose sensitive hydrogels not only are efficient in controlling the physiological blood glucose level but also provide for a sustained and controlled release of drugs having short biological half life.

Implication of nanofibers in oral drug delivery.

Nanofibers has gained significant prominence in recent years due to its wide applications in medicinal pharmacy, textile, tissue engineering and in various drug delivery system. In oral drug delivery system (DDS), nanofibers can be delivered as Nanofiber scaffolds, electrosponge nanofibers as oral fast delivery system, multilayered nanofiber loaded mashes, surface modified cross-linked electrospun nanofibers. Nanofibers are of 50- 1000 nm size fibres having large surface area, high porosity, small pore size, low density. Various approaches for formulation of nanofibers are molecular assembly, thermally induced phase separation, electrospining. Most commonly used by using electrospining polymer nanofibres with different range can be produced collective usage of electro spinning with pharmaceutical polymers offers novel tactics for developing drug delivery system (DDS). Different polymers used in preparation of nanofibers include biodegradable hydrophilic polymers, hydrophobic polymers and amphiphilic polymers. Electrospun nanofibers are often used to load insoluble drugs for enhancing their dissolution properties due to their high surface area per unit mass. Besides the water insoluble drugs freely water soluble sodium can also spun into the fibers. The most commonly polymers used for nanofibers are gelatin, dextran, nylon, polystyrene, polyacrylonitrile, polycarbonate, polyimides, poly vinyl alchol, polybenzimidazole. Delivery systems reviewed rely on temporal control, changes in pH along the GIT, the action of local enzymes to trigger drug release, and changes in intraluminal pressure. Dissolution of enteric polymer coatings due to a change in local pH and reduction of azo-bonds to release an active agent are both used in commercially marketed products. In vitro and in vivo studies have demonstrated that the release rates of drugs from these nanofiber formulations are enhanced compared to those from original drug substance. This review is focused on the different type of polymers used, different used in the preparation of nanofibers, cytotoxicity studies and application of nanofiber by using oral drug delivery.

Global insights into high temperature and drought stress regulated genes by RNA-Seq in economically important oilseed crop Brassica juncea.

BACKGROUND: Brassica juncea var. Varuna is an economically important oilseed crop of family Brassicaceae which is vulnerable to abiotic stresses at specific stages in its life cycle. Till date no attempts have been made to elucidate genome-wide changes in its transcriptome against high temperature or drought stress. To gain global insights into genes, transcription factors and kinases regulated by these stresses and to explore information on coding transcripts that are associated with traits of agronomic importance, we utilized a combinatorial approach of next generation sequencing and de-novo assembly to discover B. juncea transcriptome associated with high temperature and drought stresses. RESULTS: We constructed and sequenced three transcriptome libraries namely Brassica control (BC), Brassica high temperature stress (BHS) and Brassica drought stress (BDS). More than 180 million purity filtered reads were generated which were processed through quality parameters and high quality reads were assembled de-novo using SOAPdenovo assembler. A total of 77750 unique transcripts were identified out of which 69,245 (89%) were annotated with high confidence. We established a subset of 19110 transcripts, which were differentially regulated by either high temperature and/or drought stress. Furthermore, 886 and 2834 transcripts that code for transcription factors and kinases, respectively, were also identified. Many of these were responsive to high temperature, drought or both stresses. Maximum number of up-regulated transcription factors in high temperature and drought stress belonged to heat shock factors (HSFs) and dehydration responsive element-binding (DREB) families, respectively. We also identified 239 metabolic pathways, which were perturbed during high temperature and drought treatments. Analysis of gene ontologies associated with differentially regulated genes forecasted their involvement in diverse biological processes. CONCLUSIONS: Our study provides first comprehensive discovery of B. juncea transcriptome under high temperature and drought stress conditions. Transcriptome resource generated in this study will enhance our understanding on the molecular mechanisms involved in defining the response of B. juncea against two important abiotic stresses. Furthermore this information would benefit designing of efficient crop improvement strategies for tolerance against conditions of high temperature regimes and water scarcity.

Nanotechnology: a magic bullet for HIV AIDS treatment.

Human immunodeficiency virus (HIV) infection has become devastating in last a few years. Nearly 7400 new infection cases are coming every day. Highly active antiretroviral therapy (HAART), which involves combination of at least three antiretroviral (ARV) drugs, has been used to extend the life span of the HIV-infected patients. HAART has played an important role to reduce mortality rate in the developed countries but in the developing countries condition is still worst with millions of people being infected by this disease. For the improvement of the situation, nanotechnology-based drug system has been explored for the HIV therapeutics. Nanosystems used for HIV therapeutics offer some unique advantage like enhancement of bioavailability, water solubility, stability, and targeting ability of ARV drugs. Main nanotechnology-based systems explored for HIV therapeutics are liposomes, nanoparticles, niosomes, polymeric micelles, and dendrimers. Present manuscript reviews conventional method of HIV therapeutics and recent advances in the field of nanotechnology-based systems for treatment of HIV-AIDS.