An Automated "Hands-Off" Method for Sampling Mainstream Smoke from Cannabis Cigarettes.

A simple-to-use, portable, and relatively inexpensive system for characterizing the chemical components of mainstream smoke from cannabis cigarettes was developed and tested by using commercial hemp cigarettes. The system is described, and its performance for reproducing actual user puff topographies is shown along with extensive chemical analysis data, including PAHs, carbonyls, and organic and elemental carbon, for a small set of initial samples. By using a solid-state flow meter and fast-response mass flow controller, the prototype can reproduce measured puff topography with excellent fidelity, which will allow users to accurately reproduce the actual inhalation patterns for various types of smoking products and consumers, and to collect samples of mainstream smoke without the need to bring test subjects or controlled substances into a laboratory.

Emission factors for polycyclic aromatic hydrocarbons from laboratory biomass-burning and their chemical transformations during aging in an oxidation flow reactor.

Atmospheric polycyclic aromatic hydrocarbons (PAHs) can be emitted from different combustion sources including domestic biomass burning, internal combustion engines, and biomass burning (BB) in wild, prescribed, and agricultural fires. With climate warming and consequent global increases in frequency and severity of wildfires, BB is a dominant source of PAHs emitted into the atmosphere. In this study, six globally and regionally important and representative fuels (Alaskan peat, Moscow peat, Pskov peat, eucalyptus, Malaysian peat, and Malaysian agricultural peat) were burned under controlled conditions in the combustion chamber facility at the Desert Research Institute (DRI, Reno, NV, USA). Gas- and particle-phase BB emissions were aged in an oxidation flow reactor (OFR) to mimic five to sevendays of atmospheric aging. To sample gas- and particle-phase BB emissions, fresh and OFR-aged biomass-burning aerosols were collected on Teflon-impregnated glass fiber filters (TIGF) in tandem with XAD resin media for organic carbon speciation. The objectives of this study were to i) quantify the emission factors for 113 PAHs emitted from the combustion of the six selected fuels, ii) characterize the distribution of PAH compounds between gas and particle phases for these fuels, iii) identify the changes in PAHs during OFR-aging, and iv) evaluate toxicity potential with characterized compounds. We found that combustion emissions of gas-phase PAHs were more abundant (>80 % by mass) than particle-phase PAHs, for emissions from all combusted fuels. The mass fraction of substituted napthalenes in Moscow peat and Malaysian peat emissions were ∼70 % & 84 %, respectively, whereas in Eucalyptus the same fraction was <50 %, which indicates that these substituted compounds can be used as tracers for peat emissions. Mass concentrations of gas- and particle-phase PAHs were reduced by ∼70 % after OFR oxidation. However, the understanding of the fate of PAHs during OFR oxidation requires further investigations. Our results also indicate that the PAH toxicity of BB samples would be underestimated by 10-100 times if only the BaPeq for the 16 US EPA priority PAHs in the particle phase are included.

Carbonyls and Carbon Monoxide Emissions from Electronic Cigarettes Affected by Device Type and Use Patterns.

Dangerous levels of harmful chemicals in electronic cigarette (e-cigarette) aerosols were reported by several studies, but variability in e-cigarette design and use patterns, and a rapid development of new devices, such as JUUL, hamper efforts to develop standardized testing protocols and understand health risks associated with e-cigarette use. In this study, we investigated the relative importance of e-cigarette design, power output, liquid composition, puff topography on e-cigarette emissions of carbonyl compounds, carbon monoxide (CO), and nicotine. Four popular e-cigarette devices representing the most common e-cigarette types (e.g., cig-a-like, top-coil, 'mod', and 'pod') were tested. Under the tested vaping conditions, a top-coil device generated the highest amounts of formaldehyde and CO. A 'pod' type device (i.e., JUUL) emitted the highest amounts of nicotine, while generating the lowest levels of carbonyl and CO as compared to other tested e-cigarettes. Emissions increased nearly linearly with puff duration, while puff flow had a relatively small effect. Flavored e-liquids generated more carbonyls and CO than unflavored liquids. Carbonyl concentrations and CO in e-cigarette aerosols were found to be well correlated. While e-cigarettes emitted generally less CO and carbonyls than conventional cigarettes, daily carbonyl exposures from e-cigarette use could still exceed acute exposure limits, with the top-coil device potentially posing more harm than conventional cigarettes.

Aldehydes in Exhaled Breath during E-Cigarette Vaping: Pilot Study Results.

Several studies have shown the presence of aldehydes (i.e., formaldehyde, acrolein) in mainstream emissions of some e-cigarettes. For this reason, concerns have been raised regarding potential toxicity. The purpose of this research was to measure levels of carbonyls in exhaled breath of e-cigarette users during "vaping" sessions and estimate the respiratory tract (RT) uptake of specific aldehydes, including formaldehyde and acetaldehyde. We measured concentrations of 12 carbonyls in e-cigarette aerosols produced directly by e-cigarettes and in the exhaled breath of 12 participants (19 sessions). Carbonyls were sampled on 2,4-dinitrophenylhydrazine (DNPH) cartridges and analyzed with high performance liquid chromatography (HPLC) coupled with a UV/Vis photodiode detector. We found that in most cases, levels of aldehydes and methyl ethyl ketone (MEK) were significantly higher (2⁻125 times) in exhaled e-cigarette breaths than in pre-exposed breath. Exposure levels for the most abundant individual carbonyls in e-cigarette emissions-formaldehyde, acetaldehyde, acrolein-were between the limit of quantification (LOQ) and 24.4 µg·puff-1. The mean retention of formaldehyde in the respiratory tract was 99.7 ± 0.9% for all participants, while acetaldehyde retention was 91.6 ± 9.9%. Within the limitation of a small number of participants, our results showed that there is an increase in breath carbonyls during e-cigarette use.