Role of water shear force for microplastics fragmentation into nanoplastics.

Wastewater treatment plants (WWTPs) are major recipients of microplastics (MPs) that break down into nanoplastics (NPs) during wastewater treatment through physical, chemical, and biological processes. In particular, mechanical stress induced by the mixing process commonly used in WWTPs is thought to play a crucial role in the production of secondary MPs/NPs, which are then discharged into the open water environment through the WWTP effluent. This study investigated the fragmentation of 250 and 106 µm-sized pristine and weathered polystyrene (PS) particles using a four-blade mechanical impeller. At an energy density level of 100 kJ/L, the 250 and 106 µm-sized pristine PS particles were broken down into mean sizes of 120.6 ± 19.1 and 95.6 ± 16.8 nm, respectively. The smallest sizes were found to be 90.9 ± 17.8 and 72.4 ± 19.6 nm due to the breakdown of 250 and 106 µm-sized weathered PS particles, respectively. The morphology of the PS particles after fragmentation also demonstrated the initiation of surface damage, such as cracks, pores and rough structures. This surface crack propagation, caused by mechanically induced water shear force, was identified as the primary mechanism of MP fragmentation into NPs. It was also found that NP levels significantly increased after 40 min of mixing, with at least a 28-fold increase in water solution at an energy density of 32 kJ/L. These results clearly show that the breakdown of MPs into NPs is a continuous process during wastewater treatment, posing a significant threat to the water environment through NP release by WWTP effluents.

An assessment of the dynamic stability of microorganisms on patterned surfaces in relation to biofouling control.

Microstructure-based patterned surfaces with antifouling capabilities against a wide range of organisms are yet to be optimised. Several studies have shown that microtopographic features affect the settlement and the early stages of biofilm formation of microorganisms. It is speculated that the fluctuating stress-strain rates developed on patterned surfaces disrupt the stability of microorganisms. This study investigated the dynamic interactions of a motile bacterium (Escherichia coli) with microtopographies in relation to initial settlement. The trajectories of E. coli across a patterned surface of a microwell array within a microchannel-based flow cell system were assessed experimentally with a time-lapse imaging module. The microwell array was composed of 256 circular wells, each with diameter 10 µm, spacing 7 µm and depth 5 µm. The dynamics of E. coli over microwell-based patterned surfaces were compared with those over plain surfaces and an increased velocity of cell bodies was observed in the case of patterned surfaces. The experimental results were further verified and supported by computational fluid dynamic simulations. Finally, it was stated that the nature of solid boundaries and the associated microfluidic conditions play key roles in determining the dynamic stability of motile bacteria in the close vicinity over surfaces.

A novel approach to determine the efficacy of patterned surfaces for biofouling control in relation to its microfluidic environment.

Biofouling, the unwanted growth of sessile microorganisms on submerged surfaces, presents a serious problem for underwater structures. While biofouling can be controlled to various degrees with different microstructure-based patterned surfaces, understanding of the underlying mechanism is still imprecise. Researchers have long speculated that microtopographies might influence near-surface microfluidic conditions, thus microhydrodynamically preventing the settlement of microorganisms. It is therefore very important to identify the microfluidic environment developed on patterned surfaces and its relation with the antifouling behaviour of those surfaces. This study considered the wall shear stress distribution pattern as a significant aspect of this microfluidic environment. In this study, patterned surfaces with microwell arrays were assessed experimentally with a real-time biofilm development monitoring system using a novel microchannel-based flow cell reactor. Finally, computational fluid dynamics simulations were carried out to show how the microfluidic conditions were affecting the initial settlement of microorganisms.