RESUMO
A mechanism of unusual tandem (MS/MS) fragmentation of protonated species of N-(triphenyl-λ5-phosphanylidene) derivatives, [M + H]+ to generate triphenylphosphine oxide (TPPO) within the mass spectrometer has been investigated and reported. Collision-induced dissociation of these molecules resulted in the generation of TPPO as a signature fragment. This fragment suggested the presence of a P-O bond in the structure which was contrary to the structure of the compound identified by nuclear magnetic resonance spectrometry (NMR) and single-crystal X-ray diffractometry (SXRD) techniques with a PâN bond rather than a P-O bond. In order to confirm the generation of the TPPO fragment within the mass spectrometer, 14 different N-(triphenyl-λ5-phosphanylidene) derivatives containing amide, 18O-labeled amide, thiamide, and nonacyl phosphazene derivatives were synthesized and their MS/MS behavior was studied by liquid chromatography-high-resolution mass spectrometry. Fragmentation of these amide derivatives generated TPPO/TPPS or their 18O-labeled analogues as the major fragment in almost all cases under similar MS conditions. Based on the outcome of these experiments, a plausible mechanism for such fragmentation, involving the intramolecular shifting of oxygen from carbon to phosphorus, has been proposed. DFT calculations for the protonated species at B3LYP-D3/6-31+G(d,p) further supported the proposed mechanism involving a four-membered ring, P-O-C-N, as the transition state. Details of this work are presented here.
RESUMO
This commentary presents contributions and accomplishments of Professor Saranjit Singh, National Institute of Pharmaceutical Education and Research (NIPER), SAS Nagar, India, to pharmaceutical research and education. Prof. Singh completed his successful tenure in October 2021. Over his 40+ years of illustrious academic career, he trained 147 Masters and 15 PhD students in the fields of drug stability testing, degradation chemistry, impurity and metabolite characterization, and advanced analytical technologies. He has published â¼250 research articles, reviews, editorials, patent, book, and book chapters, and received numerous awards, including the Professor M.L. Khorana Memorial Lecture Award from the Indian Pharmaceutical Association (IPA) and the Outstanding Analyst and Eminent Analyst awards from the Indian Drug Manufacturers' Association (IDMA). This commentary highlights Prof. Singh's inspiring personal and renowned professional journey, including early life, education, career, accomplishments, as well as his services to academia, industry, and regulatory. By sharing the contributions and accomplishments of Prof. Singh, we strongly believe that his story will inspire the next generation of scientists to continue his legacy to advance the field.
Assuntos
Distinções e Prêmios , Mentores , História do Século XX , Humanos , MasculinoRESUMO
The study introduces first report on a liquid chromatographic method for the quantification of 1,2-Dimyristoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] ammonium salt (DMPE-PEG 2000), which is an important constituent of lipid-based nanoparticles. It involves an HPLC-CAD stability-indicating assay method development for DMPE-PEG 2000 and structure elucidation of its degradation products. Hypersil Gold™ PFP column (150 mm × 4.6 mm, 3.0 µm) was used to achieve the separation among DMPE-PEG 2000 and its degradation products using 0.0025% formic acid in water: methanol (80:20 v/v) as mobile phase A and methanol: acetonitrile (60:40 v/v) as mobile phase B in a gradient elution mode. The method was validated for precision, linearity, sensitivity, solution stability and robustness. Relative standard deviations for the intra-day precision, inter-day precision and sensitivity were 1.6%, 0.6% and 3.8%, respectively. The method was linear in the range from 210 µg/mL to 390 µg/mL with R2 value of 0.996. Further, the solution stability of DMPE-PEG 2000 was evaluated under different stressed and storage conditions to understand the impact of any excursion to its regular storage temperature of -20 °C. The observed degradation products were identified through liquid chromatography high resolution mass spectrometry and a tentative pathway was proposed for the generation of these degradants.
Assuntos
Fosfolipídeos , Polietilenoglicóis , Cromatografia Líquida de Alta Pressão , Estabilidade de Medicamentos , Fosfatidiletanolaminas , Reprodutibilidade dos TestesRESUMO
In the present work, we report compilation and analysis of 245 drugs, including small and macromolecules approved by the U.S. FDA from 2015 until June 2020. Nearly 29% of the drugs were approved for the treatment of various types of cancers. Other major therapeutic areas of focus were infectious diseases (14%); neurological conditions (12%); and genetic, metabolic, and cardiovascular disorders (7-8% each). Itemization of the approved drugs according to the year of approval, sponsor, target, chemical class, major drug-metabolizing enzyme(s), route of administration/elimination, and drug-drug interaction liability (perpetrator or/and victim) is presented and discussed. An effort has been made to analyze the pharmacophores to identify the structural (e.g., aromatic, heterocycle, and aliphatic), elemental (e.g., boron, sulfur, fluorine, phosphorus, and deuterium), and functional group (e.g., nitro drugs) diversity among the approved drugs. Further, descriptor-based chemical space analysis of FDA approved drugs and several strategies utilized for optimizing metabolism leading to their discoveries have been emphasized. Finally, an analysis of drug-likeness for the approved drugs is presented.
Assuntos
Aprovação de Drogas , Compostos Orgânicos/uso terapêutico , Humanos , Compostos Orgânicos/química , Estados Unidos , United States Food and Drug AdministrationRESUMO
This study reports the application of retention modeling and quality by design practices for reverse-phase liquid chromatographic method development of a new chemical entity. Prior to the retention modeling, preliminary screening experiments were performed for the selection of stationary phase, organic modifiers, and method parameters. Based on the results of preliminary method conditions, tG-T (gradient time - temperature) 2-D modeling with 4 input runs, and tG-T-tc (gradient time-temperature-ternary composition) 3-D modeling with 12 input runs were designed to build a model for achieving the optimized separation. Modeling of reverse phase separations was based on the measurement of both retention times and peak areas. A design space with appropriate input variables and control strategy was established prior to optimization and robustness evaluation following the quality by design framework. DryLabâ was used to predict the optimized gradient profile and separation temperature. The robustness evaluation was carried out using the multiple factors at a time approach and the control space was established. The interdependence of control space and the control strategy was demonstrated by evaluating method robustness using two levels of system suitability criteria. The predictive accuracy of the retention modeling was established through experimental verification of the in-silico predictions. The quality by design based method development approach demonstrated the in-silico optimization as an integral component of reverse-phase chromatographic method development to evaluate the interplay of factors such as organic modifiers, separation temperature and gradient time, which greatly integrated and enhanced method robustness during method development.
Assuntos
Cromatografia Líquida/métodos , Modelos Químicos , Cromatografia Líquida/normas , Simulação por Computador , Projetos de Pesquisa/tendências , TemperaturaRESUMO
The current study was undertaken to evaluate clinical-grade disposable syringes of various brands based on the identification of an extraneous impurity leaching out from the rubber gasket of the syringe during sample preparation for liquid chromatography method development. The syringes were evaluated using aqueous and organic solvents and their mixtures to understand susceptibility towards extractables. It was observed that the extraction propensity of different brands of syringes was varying in terms of number and levels of extractables. A total of eight extractables (including the extraneous impurity observed during method development) were identified from the syringe gaskets with the help of liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS), nuclear magnetic resonance (NMR) and/or infrared (IR) spectroscopy. To the best of authors' knowledge, four out of eight proposed extractables are not reported in the literature. A tentative pathway for the formation of the extractables was also proposed.
Assuntos
Embalagem de Medicamentos , Seringas , Cromatografia Líquida , Contaminação de Medicamentos , Espectrometria de Massas , BorrachaRESUMO
Fixed dose combination (FDC) of tenofovir disoproxil fumarate (TDF) and lamivudine (3TC) is one of the most preferred FDC for the treatment of acquired immunodeficiency syndrome (AIDS)/human immunodeficiency virus (HIV) infection. To the best of authors' knowledge there are no reported methods for chiral purity estimation of both drugs simultaneously from a FDC. The current study was focused on the development of a single chiral method uisng supercritical fluid chromatography (SFC) for separation of stereoisomers of TDF and 3TC combination employing design of experiment (DoE) approach. Method development was planned in three steps by using different experimental designs for each step. I-optimal, Taguchi orthogonal array and face-centred central composite designs (CCD) were employed for primary parameter selection, secondary parameter screening and final method optimization, respectively. All six stereoisomers were separated in a 10 minute run on Chiralpak IA column with carbon di-oxide /methanol (containing 0.5 % v/v n-butylamine) as mobile phase at 1.5 mL/min in gradient mode. The optimized method was verified for performance through establishing specificity, precision, linearity, accuracy, limit of quantification, and solution stability. Resolution between each isomeric pair was more than 1.5. The method was found to be linear from 1.5 µg/mL to 7.5 µg/mL for 3TC and 7.5 µg/mL to 37.5 µg/mL for TDF stereoisomers. The R2 values for all the linearity curves for undesired isomers were greater than 0.995. The method proved to be rapid, reproducible and efficient to quantify stereoisomers of both drugs in a single run.
Assuntos
Cromatografia com Fluido Supercrítico/métodos , Lamivudina/análise , Tenofovir/análise , Lamivudina/química , Padrões de Referência , Reprodutibilidade dos Testes , Estereoisomerismo , Tenofovir/químicaRESUMO
Poly (vinyl alcohol), PVA, a commonly used excipient to coat tablets, forms insoluble films in the presence of acids and thermal stress. This may lead to drug products failing to meet dissolution specifications over time. Studies were conducted to understand the effect of acid strength, processing conditions, and storage stress on the mechanism of insoluble film formation using PVA and Opadryâ II as model systems. Aqueous cast films, prepared by incorporating hydrochloric acid (HCl) into the coating solutions or exposing pre-cast "as is" films to HCl vapors, were used as surrogates to develop analytical methods. To understand effect of acid and processing on coatings, acidified Opadryâ II was spray coated onto inert cores under "wet" or "dry" conditions. Samples stored at 50-60 °C were analyzed for film disintegration to understand physical/chemical changes in the polymer. Rate and extent of insoluble films formation was dependent on the acid concentration and thermal stress. Analysis of the films indicated significant de-acetylation and ether bond formation in insoluble aqueous cast films. In contrast, acidified coated films showed only ether bond formation, which increased on stress, forming insoluble films. The reduction in the time to form insoluble films for "wet" versus "dry" coated films was rationalized by considering effect of coating, drying, and storage on the microstructure of acidified PVA and ether bond propagation. The results highlight the need to develop an in-depth understanding of the design space for PVA coated products and storage conditions in presence of acids.
Assuntos
Excipientes , Álcool de Polivinil , Polímeros , ComprimidosRESUMO
OBJECTIVES: With the growth of forensic odontology, dental records have become an essential source of information, especially for medicolegal cases in general practice. It is mandated by the law that every dentist must keep some kind of records for every patient they treat. After the death of an individual, remnants of teeth are usually damaged at the last among all body parts. Dental records assist in personal identification in cases of mass disasters, criminal investigations, and medicolegal issues. However, in India, rules for maintaining dental records are not very strictly followed. Thus, the aim of this study was to evaluate the knowledge regarding the maintenance of dental records among dentists in Punjab and Uttar Pradesh. MATERIALS AND METHODS: Data collection was performed via a questionnaire. The study population responded to the questions pertaining to knowledge regarding forensic odontology methods and the mode of maintaining dental records in their regular practice through a personal interview. A descriptive analysis was carried out for the data. The data were summarized and analyzed using the statistical software Statistical Package for the Social Sciences (SPSS) version 18.0. RESULTS: A very low percentage (22%) of the dentists were seen to be maintaining records on a regular basis. Seventy-eight percent of the dentists were not maintaining any records. CONCLUSION: This study clearly indicates that the dentists in Punjab and Uttar Pradesh need to be properly trained for any kind of forensic and medicolegal needs.
RESUMO
BACKGROUND: The present study was carried out to screen various ethambutol dihydrochloride (EB2HCI) bulk drug samples and anti-tuberculosis (anti-TB) products for the presence of less active (R,S)-EB2HCl. METHODOLOGY: Samples of pure EB2HCl were received gratis from various companies and the formulations were procured from local market, and also from a Directly Observed Treatment Short-course (DOTS) centre. Some products available in the institute from Global Drug Facility were also included in the study. In total, 5 API samples and 35 formulations containing EB2HCI were investigated. These were subjected to evaluation for the presence of (R,S)-EB2HCl using a previously published differential scanning calorimetric method. The thermograms were recorded between 25 degrees C and 250 degrees C at a rate of 10 degrees C/min. RESULTS: 1 API sample and 12 formulations were found to contain (R,S)-EB2HCI up to an extent of 30-100%. One of the DOTS centres supply was also found to contain approximately 97% of the less active isomer. CONCLUSION: The presence of therapeutically inactive form of the EB2HCl from 30-100% in approximately 30% of the products in the local market is an alarming finding, which means low quality anti-TB products are in circulation. The same may be contributory to the developing resistance of the drugs against the mycobacterium.
Assuntos
Antituberculosos/análise , Química Farmacêutica , Etambutol/análise , Etambutol/química , Antituberculosos/normas , Etambutol/normas , Humanos , Índia , Isomerismo , Garantia da Qualidade dos Cuidados de Saúde , TermografiaRESUMO
Isoniazid was subjected to different ICH prescribed stress conditions of thermal stress, hydrolysis, oxidation and photolysis. The drug was stable to dry heat (50 and 60 degrees C). It showed extensive decomposition under hydrolytic conditions, while it was only moderately sensitive to oxidation stress. The solid drug turned intense yellow on exposure to light under accelerated conditions of temperature (40 degrees C) and humidity (75% RH). In total, three major degradation products were detected by LC. For establishment of stability-indicating assay, the reaction solutions in which different degradation products were formed were mixed, and the separation was optimized by varying the LC conditions. An acceptable separation was achieved using a C-18 column and a mobile phase comprising of water:acetonitrile (96:4, v/v), with flow rate and detection wavelength being 0.5 ml min(-1) and 254 nm, respectively. The degradation products appeared at relative retention times (RR(T)) of 0.71, 1.34 and 4.22. The validation studies established a linear response of the drug at concentrations between 50 and 1000 microg ml(-1). The mean values (+/-R.S.D.) of slope, intercept and correlation coefficient were 35,199 (+/-0.88), 114,310 (+/-4.70) and 0.9998 (+/-0.01), respectively. The mean R.S.D. values for intra- and inter-day precision were 0.24 and 0.90, respectively. The recovery of the drug ranged between 99.42 and 100.58%, when it was spiked to a mixture of solutions in which sufficient degradation was observed. The specificity was established through peak purity testing using a photodiode array detector. The method worked well on application to marketed formulation of isoniazid, and a fixed-dose combination containing isoniazid and ethambutol HCl. It was even extendable to LC-MS studies, which were carried out to identify the three degradation products. The m/z values of the peaks at RR(T) 0.71 and RR(T) 1.34 matched with isonicotinic acid and isonicotinamide, respectively. The product appearing at RR(T) 4.22 was isolated using preparative LC-MS, and turned out to be a yellow compound that was identified as isonicotinic acid N'-(pyridyl-4-carbonyl)-hydrazide based on mass, FTIR and (1)H/(13)C NMR spectral data. The same was indicated to be responsible for discolouration of isoniazid bulk drug substance and formulations, which is a familiar problem. The mechanism of formation of the said compound is outlined.
Assuntos
Bioensaio/métodos , Cromatografia Líquida/métodos , Isoniazida/análise , Isoniazida/metabolismo , Espectrometria de Massas/métodos , Química Farmacêutica/métodos , Estabilidade de Medicamentos , Temperatura Alta , Hidrólise , Isoniazida/química , Espectroscopia de Ressonância Magnética , Modelos Moleculares , Estrutura Molecular , Oxirredução , Fotólise , Reprodutibilidade dos Testes , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Ampicillin and cloxacillin were degraded together under different stress test conditions prescribed by International Conference on Harmonization. The samples so generated were used to develop a stability-indicating high performance liquid chromatographic (HPLC) method for the two drugs. The drugs were well separated from degradation products using a reversed-phase (C-18) column and a mobile phase comprising of acetonitrile:phosphate buffer (pH 5.0), which was delivered initially in the ratio of 15:85 (v/v) for 1 min, then changed to 30:70 (v/v) for next 14 min, and finally equilibrated back to 15:85 (v/v) from 15 to 20 min. Other HPLC parameters were: flow rate, 1 ml/min; detection wavelength, 225 nm; and injection volume, 5 microl. The method was validated for linearity, precision, accuracy, specificity and selectivity. It was also compared with the assay procedures given in British Pharmacopoeia for individual drugs. Similar results were obtained, indicating that the proposed single method allowed selective analysis of both ampicillin and cloxacillin, in the presence of their degradation products formed under a variety of stress conditions. The developed procedure was also applicable to the determination of instability of the drugs in commercial products.
Assuntos
Ampicilina/análise , Antibacterianos/análise , Cromatografia Líquida de Alta Pressão/métodos , Cloxacilina/análise , Acetonitrilas/química , Ampicilina/química , Antibacterianos/química , Soluções Tampão , Cloxacilina/química , Combinação de Medicamentos , Estabilidade de Medicamentos , Guias como Assunto , Concentração de Íons de Hidrogênio , Hidrólise , Modelos Lineares , Oxirredução , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Solventes/químicaRESUMO
A well-known problem of anti-tuberculosis fixed-dose combination (FDC) products containing rifampicin (R) and isoniazid (H) is the fall in bioavailability, in particular of R, when two or more drugs are present together. The same has been ascribed to hydrolysis of R to 3-formylrifamycin (3-RIF) under stomach acid conditions and reaction of the latter with H to form isonicotinyl hydrazone (HYD). The objective of present study was to explore whether the same reaction occurred when H was present along with rifapentine (Rp), a newer long acting rifamycin, which is structurally similar to R. Clinical trials are currently undergoing for co-administration of Rp with H in patients who had completed 2 months of standard chemotherapy. For the purpose, first a validated HPLC method was developed for the separation of Rp and H, and the same was used for the study of interaction between the two drugs. Like R, Rp was also found to convert to 3-RIF in acid conditions, which reacted further with H to form HYD. The pH-rate profile was also similar in shape to that established with the combination of R and H; maximum decomposition occurred at pH 2, where Rp loss was to an extent of approximately 30%, while corresponding decomposition of H was approximately 9%. These values were similar to those reported for the combination of R (approximately 33%) and H (approximately 10%). Hence, the study suggests that co-administration of Rp and H should be avoided, like in case of R and H, and the two drugs should not be formulated directly into a single dosage form.
Assuntos
Antituberculosos/química , Isoniazida/química , Rifampina/análogos & derivados , Cromatografia Líquida de Alta Pressão/métodos , Interações Medicamentosas , Concentração de Íons de Hidrogênio , Rifampina/químicaRESUMO
The behavior of moisture gain and equilibrium moisture content (EMC) was determined for 30 drug substances at relative humidities (RH) ranging from 11% to 93%. Based on the results, the drugs were categorized into different classes, following the classification system proposed by Callahan et al. About 23 fell under Class-I (nonhygroscopic), four under Class-II (slightly hygroscopic), and three under Class-III (moderately hygroscopic). Most of the Class-III drugs converted from solid to liquid state at > 75% RH, and the moisture increase was more than 40% above 90% RH. However, the moisture increase was comparatively much smaller at humidities < 40%-50%. Hence, no drug could be categorized in Class-IV (very hygroscopic), where gain of moisture is generally higher even at lower humidities. The results were correlated to the statements given in the compendia on hygroscopicity, and also the values of loss on drying (LOD). The study suggests that there is a need to rationalize the pharmacopoeial information.
Assuntos
Excipientes/química , Umidade , Preparações Farmacêuticas , Absorção , Estabilidade de Medicamentos , Preparações Farmacêuticas/química , Preparações Farmacêuticas/classificação , Preparações Farmacêuticas/normas , Água/análiseRESUMO
The purpose of this study was to carry out drug-drug compatibility studies on pure first line anti-tuberculosis drugs, viz., rifampicin (R), isoniazid (H), pyrazinamide (Z), and ethambutol hydrochloride (E). Various possible binary, ternary, and quaternary combinations of the four drugs were subjected to accelerated stability test conditions of 40 degrees C and 75% relative humidity (RH) for 3 months. For comparison, parallel studies were also conducted on single drugs. Changes were looked for in the samples drawn after 15, 30, 60, and 90 days of storage. Analyses for R, H, and Z were carried out using a validated HPLC method. The E was analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS), as it does not absorb in ultraviolet (UV). All single pure drugs were relatively stable and showed only 3%-5% degradation under accelerated conditions for 3 months. However, significant interactions were observed in case of the drug mixtures. In particular, ternary and quaternary drug combinations containing R and H along with Z and/or E were very unstable, showing 90%-95% and 70%-75% loss of R and H, respectively. In all these cases, isonicotinyl hydrazone (HYD) of 3-formylrifamycin and H was found to be the major degradation product. In case of RE and RZE mixtures, where H was absent, 3-formylrifamycin was instead the key degradation product. Another unidentified peak was observed in the mixture containing RZE. Apart from these chemical changes, considerable physical changes were also observed in pure E and the mixtures containing E, viz., RE, ZE, RHE, RZE, and RHZE. In addition, significant physical changes associated with noteworthy loss of H and E were also observed in mixtures containing HE and HZE. The present study thus amply shows that the four primary anti-tuberculosis drugs, when present together, interact with each other in a multiple and complex manner.
Assuntos
Antituberculosos/química , Cromatografia Líquida , Combinação de Medicamentos , Composição de Medicamentos , Incompatibilidade de Medicamentos , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Etambutol/química , Temperatura Alta , Umidade , Isoniazida/química , Espectrometria de Massas , Pirazinamida/química , Rifampina/químicaRESUMO
Rifampicin and isoniazid are known to interact with each other in solid formulation environment to yield isonicotinyl hydrazone (HYD). In earlier studies, this reaction was indicated to be catalyzed by pyrazinamide and ethambutol hydrochloride, the two other co-drugs present in oral anti-tuberculosis fixed-dose combination (FDC) formulations. Accordingly, the present study was carried out to understand the catalytic role of pyrazinamide and ethambutol hydrochloride on the reaction between rifampicin and isoniazid. For the purpose, organic bases and amides similar in structure to pyrazinamide and ethambutol hydrochloride were combined individually with rifampicin and isoniazid. The compounds employed were pyrazine, piperdine, pyrollidine, pyridine, triethylamine, diisopropylethylamine, picolinamide, benzamide, ethylenediamine, ethanolamine, diethanolamine, and triethanolamine. An additional study was also carried out in the presence of free base of ethambutol. The mixtures were exposed to accelerated stability test condition of 40 degrees C/75% RH for 15 d. The nature of the products formed and the changes in relative concentrations of the drugs and products were followed by HPLC. The drugs showed different extent of degradation, yielding HYD, and in some cases degradation products of rifampicin. The results confirmed the catalytic role of pyrazinamide and ethambutol hydrochloride. The catalysis is postulated to involve intra-molecular proton transfer during transhydrazone formation process, entailing a tetrahedral mechanism.
Assuntos
Antibióticos Antituberculose/química , Antituberculosos/química , Etambutol/química , Isoniazida/química , Pirazinamida/química , Rifampina/química , Amidas/síntese química , Amidas/química , Catálise , Cromatografia Líquida de Alta Pressão , Combinação de Medicamentos , Ácidos Picolínicos/síntese química , Ácidos Picolínicos/química , Espectrofotometria UltravioletaRESUMO
An investigation was carried out to explore the possible reason for the physical instability of a marketed strip packaged anti-TB fixed dose combination (FDC) tablet containing 300 mg of isoniazid (H) and 800 mg of ethambutol hydrochloride (E). The instability was in the form of distribution of white powder inside the strip pockets. High-performance liquid chromatography (HPLC) and liquid chromatography-mass spectrometry (LC-MS-MS) studies confirmed that both H and E were present in the powder. The same was also confirmed through Fourier-transform infrared (FTIR) spectroscopy, which also indicated absence of interaction between the two drugs. No sublimation of the drugs was observed up to 110 degrees C, indicating that the observed instability was not due to this reason. Subsequently, attention was paid to the possibility of moisture gain by the tablets through defective packaging (which was established) due to hygroscopicity of E. To understand the phenomenon further, pure drugs and their mixtures were stored under accelerated conditions of temperature and humidity [40 degrees C/75% relative humidity (RH)] and both increase in weight and physical changes were recorded periodically. The mixtures gained moisture at a higher rate than pure E and those with higher content of E became liquid, which on withdrawal from the chambers, became crystallized. The drug mixture containing H:E at a ratio of 30:70 w/w, which was similar to the ratio of the drugs in the tablets (27:73 w/w), crystallized fastest, indicating formation of a rapid crystallizing saturated system at this ratio of the drugs. It is postulated that the problem of instability arises because of the formation of a saturated layer of drugs upon moisture gain through the defective packaging material and drying of this layer with time. The study suggests that barrier packaging free from defects and alternatively (or in combination) film coating of the tablets with water-resistant polymers are essential for this formulation.