[Epidemiological characteristics and spatiotemporal distribution of schizophrenia in Ningbo, 2018-2022].

Objective: To explore the temporal and spatial distribution characteristics of reported incidence of schizophrenia in Ningbo from 2018 to 2022 and to provide a scientific basis for rational allocation of mental health resources and comprehensive prevention and treatment of schizophrenia. Methods: The reported incidence data of schizophrenia from 2018 to 2022 were collected from Ningbo's mental health information management system, and the reported incidence was calculated by township. The spatial correlation analysis and the spatiotemporal scan analysis were used to study the spatiotemporal distribution of schizophrenia. Results: The reported incidence of schizophrenia decreased from 2018 to 2022, with 4 133 new cases reported, and the annual average reported incidence was 9.76/100 000. Global and local spatial autocorrelation analysis showed positive spatial correlations and hot spots in 2018-2020. The space-time scan analysis showed an incidence cluster in Dongqiao Town, Haishu District, during 2018-2019. The RR was 2.46, and the log-likelihood ratio was 256.89. Conclusions: The reported incidence of schizophrenia in Ningbo has obvious temporal and spatial aggregation, and the high incidence area explored can provide clues for further research on the correlation between environmental factors and the incidence of schizophrenia and has certain guiding significance for the rational allocation of mental health resources in Ningbo.

[Incidence and trend of occupational diseases in Ningbo, China, from 2006 to 2015].

Objective: To investigate the incidence, distribution features, and incidence trend of occupational diseases in Ningbo, China, from 2006 to 2015. Methods: In February 2016, the data on occupational disease report cards in the occupational disease and occupational health information system from 2006 to 2015 were collected to perform a comprehensive analysis of the types, incidence trend, population characteristics, and enterprise characteristics of occupational diseases. Results: There were 845 new cases of occupational diseases in Ningbo from 2006 to 2015, among which 596 (70.53%) were pneumoconiosis; there were 445 (74.66%) cases of stage I pneumoconiosis, 73 (12.25%) cases of stage II pneumoconiosis, and 78 (13.09%) cases of stage III pneumoconiosis; silicosis (59.76%) was the most common type of pneumoconiosis. Of all patients with occupational diseases, 84.97% were male, 64.50%were aged 35-55 years, and 63.67% had 5-20 working years. Most of the patients with occupational diseases worked in small and medium-sized private (or foreign) enterprises; the most common industries were black metal smelting and rolling (38.76%) , construction (17.11%) , and non-metallic ore mining (13.09%) . A total of 51.28%, 10.26%, and 7.69% of the patients with occupational poisoning worked in the electric apparatus manufacturing industry, furniture manufacturing industry, and chemical raw material and chemical product manufacturing industry, respectively. The cases of occupational diseases are mainly distributed in Yuyao City (24.62%) , Yinzhou District (23.91%) , and Ninghai County (15.62%) . Conclusion: Pneumoconiosis is the most common type of occupational disease in Ningbo and most of these patients work in small and medium-sized private (or foreign) enterprises. The supervision of small and medium-sized private enterprises should be enhanced to protect workers' health.

[Relationship between weather factors and heat stroke in Ningbo city].

OBJECTIVE: To explore the main effects of weather factors on heat stroke. METHODS: Data from case report on heat stroke was collected in Ningbo city during 2011 to 2014. Temperature threshold, lag effects and interaction of weather factors on heat stroke had been analyzed, using the piecewise regression model, distributed lag non-linear model, response surface model and other methods. RESULTS: RESULTS showed that temperature and humidity were more correlated with heat stroke than other weather-related factors. Through different models, daily average temperature always presented a better role in predicting the heat stroke, rather than maximum or minimum temperature. Positive association between daily average temperature and heat stroke was obvious, especially at lag 0-1 days, with its threshold as 29.1 (95% CI: 28.7-29.5) ℃ . The cumulative RR of heat stroke at 90(th) percentile of daily average temperature versus 10(th) percentile was 14.05 (95% CI: 7.23-27.31) in lag 0-1 days. The effects of daily relative humidity on heat stroke appeared nonlinear, with low humidity showing a negative effect on heat stroke and could lag for 1-4 days. However, the effect of high humidity was not significant, with the cumulative RR of low humidity and high humidity as 2.35 (95%CI: 1.27-4.33) and 0.86 (95%CI: 0.40-1.85) in lag of 0-4 days, respectively. We also noticed that there was an interactive effect of both temperature and humidity on heat stroke. Under high temperature and low humidity, the risk of heat stroke showed the highest. CONCLUSIONS: Temperature and humidity showed obvious relationship with heat stroke in Ningbo city, with the threshold temperature as 29.1 ℃. Under high temperature and low humidity, the risk of heat stroke became the highest.

[The application of two occupation health risk assessment models in a wooden furniture manufacturing industry].

Objective: To explore the applicability of 2 different models of occupational health risk assessment in wooden furniture manufacturing industry. Methods: American EPA inhalation risk model and ICMM model of occupational health risk assessment were conducted to assess occupational health risk in a small wooden furniture enterprises, respectively. Results: There was poor protective measure and equipment of occupational disease in the plant. The concentration of wood dust in the air of two workshops was over occupational exposure limit (OEL) , and the CTWA was 8.9 mg/m3 and 3.6 mg/m3, respectively. According to EPA model, the workers who exposed to benzene in this plant had high risk (9.7×10-6 ~34.3×10-6) of leukemia, and who exposed to formaldehyde had high risk (11.4 × 10-6) of squamous cell carcinoma. There were inconsistent evaluation results using the ICMM tools of standard-based matrix and calculated risk rating. There were very high risks to be attacked by rhinocarcinoma of the workers who exposed to wood dust for the tool of calculated risk rating, while high risk for the tool of standard-based matrix. For the workers who exposed to noise, risk of noise-induced deafness was unacceptable and medium risk using two tools, respectively. Conclusion: Both EPA model and ICMM model can appropriately predict and assessthe occupational health risk in wooden furniture manufactory, ICMM due to the relatively simple operation, easy evaluation parameters, assessment of occupational- disease-inductive factors comprehensively, and more suitable for wooden furniture production enterprise.

Epidemiological characteristics of malaria in Ningbo City, China 2000-2011.

The objective of this study was to explore the trend and the epidemiological characteristics of malaria in Ningbo from 2000 through 2011 and provide scientific evidence for the prevention and control. Using the retrospective study, data relating to malaria epidemics during 2000-2011 in Ningbo were collected through the questionnaires of the cases and other important surveillance data. Adult mosquitoes were collected using CDC light traps baited with CO2. Results showed that Plasmodium vivax was the main species, and Anopheles sinensis was the only vector species of malaria. The annual incidence rates (per 100000) ranged from 0.156 to 3.224, and about 95.41% of the cases were imported. The cases occurred mainly between May and November and the incidence showed two peaks, and the local transmission of malaria was determined by vector density. Considering the vast majority of these infections were imported vivax malaria cases from domestic endemic areas (particularly Anhui province), and may lead to limited local transmission, strengthening the routine monitoring of imported malaria, ensuring timely diagnosis, improving case detection rate, giving a standardized treatment to patients and intensifying public health education on malaria prevention are extremely important to malaria prevention and control activities.