Evidence for extensive non-endocytotic translocation of peptide nucleic acids across mammalian plasma membranes.

The ability of peptide nucleic acids (PNA) to enter and to cross filter-grown MDCK, HEK and CHO cells was studied by means of a protocol based on capillary electrophoresis combined with laser-induced fluorescence detection. The used approach avoided possible errors encountered in protocols based on confocal laserscanning microscopy and FACS analysis. In contradiction to the commonly anticipated unability of PNA to cross biomembranes, extensive translocation of unmodified PNA into and across the investigated cell types was found. The transport mode comprised a variety of energy dependent and -independent as well as temperature sensitive mechanisms being probably destined to natural substrates and hijacked by PNA. The presented results suggest active as well as passive export mechanisms rather than poor penetration into cells to be responsible for the only weak biological activity of unmodified PNA.

Dicyclopropylmethyl peptide backbone protectant.

The N-dicyclopropylmethyl (Dcpm) residue, introduced into amino acids via reaction of dicyclopropylmethanimine hydrochloride with an amino acid ester followed by sodium cyanoborohydride or triacetoxyborohydride reduction, can be used as an amide bond protectant for peptide synthesis. Examples which demonstrate the amelioration of aggregation effects include syntheses of the alanine decapeptide and the prion peptide (106-126). Avoidance of cyclization to the aminosuccinimide followed substitution of Fmoc-(Dcpm)Gly-OH for Fmoc-Gly-OH in the assembly of sequences containing the sensitive Asp-Gly unit.

Solid-phase synthesis of a cyclodepsipeptide: cotransin.

The first solid-phase synthesis of cotransin--a cyclic depsipeptide having high pharmacological potential--was achieved, by a proper choice of coupling reagents and use of either TBAF or DBU for Fmoc removal to suppress the otherwise dominating, sequence-derived diketopiperazine formation. Starting the assembly from C-terminal lactic acid allowed fast and epimerization-free cyclization in solution. Novel conditions for orthogonal use of the Fmoc/Bsmoc-protection system were discovered, and an unexpected nucleophilic behavior of DBU was observed.

A Toll-like receptor 2-integrin beta3 complex senses bacterial lipopeptides via vitronectin.

Toll-like receptor 2 (TLR2) initiates inflammation in response to bacterial lipopeptide (BLP). However, the molecular mechanisms enabling the detection of BLP by TLR2 are unknown. Here we investigated the interaction of BLP with human serum proteins and identified vitronectin as a BLP-recognition molecule. Vitronectin and its receptor, integrin beta(3), were required for BLP-induced TLR2-mediated activation of human monocytes. Furthermore, monocytes from patients with Glanzmann thrombasthenia, which lack integrin beta(3), were completely unresponsive to BLP. In addition, integrin beta(3) formed a complex with TLR2 and this complex dissociated after BLP stimulation. Notably, vitronectin and integrin beta(3) coordinated responses to other TLR2 agonists such as lipoteichoic acid and zymosan. Our findings show that vitronectin and integrin beta(3) contribute to the initiation of TLR2 responses.

The depsipeptide technique applied to peptide segment condensation: scope and limitations.

A promising application of the depsipeptide technique has recently been proposed to provide ideal conditions for segment condensation, in that coupling of peptides bearing a C-terminal depsipeptide unit occurs without giving rise to epimerization at the activated amino acid. This is due to the low tendency of the activated depsipeptide units, in contrast to the corresponding peptide segments, to form optically labile oxazolones. In this work we demonstrate that coupling of depsipeptides via base-assisted activation using HBTU occurs not only without loss of configuration, but even much faster than the coupling of the corresponding all-amide segments. Nevertheless, when the coupling of long depsipeptide segments proceeds slowly, we uncovered the occurrence of beta-elimination at the activated depsipeptide unit, in an extent dependent on the presence of base in the system and on the type of the solvent. Beta-elimination was completely suppressed by using carbodiimide/HOBt activation in a non-polar solvent (DCM), and in more polar media it was limited by substituting TMP for DIEA during HBTU activation, or using particular solvent mixtures (such as DMSO/toluene) for activation via carbodiimide. Finally, we show the application of C-terminal pseudoprolines, in comparison with that of depsipeptide units, to segment coupling.

The interaction of arginine- and tryptophan-rich cyclic hexapeptides with Escherichia coli membranes.

Cyclization of R- and W-rich hexapeptides has been found to enhance specifically the antimicrobial activity against Gram-negative Escherichia coli. To gain insight into the role of the bacterial outer membrane in mediating selectivity, we assayed the activity of cyclic hexapeptides derived from the parent sequence c-(RRWWRF) against several E. coli strains and Bacillus subtilis, L-form bacteria, and E. coli lipopolysaccharide (LPS) mutant strains, and we also investigated the peptide-induced permeabilization of the outer and inner membrane of E. coli. Wall-deficient L-form bacteria were distinctly less susceptible than the wild type strain. The patterns of peptide-induced permeabilization of the outer and inner E. coli membranes correlated well with the antimicrobial activity, confirming that membrane permeabilization is a detrimental effect of the peptides upon bacteria. Truncation of LPS had no influence on the activity of the cyclic parent peptide, but the highly active c-(RRWFWR), with three adjacent aromatic residues, required the complete LPS for maximal activity. Furthermore, differences in the activity of the parent peptide and its all-D sequence indicated stereospecific interactions with the LPS mutant strains. We suggest that, depending on the primary sequence of the peptides, either hydrophobic interactions with the fatty acid chains of lipid A, or electrostatic interactions disturbing the polar core region and interference with saccharide-saccharide interactions prevail in the barrier-disturbing effect upon the outer membrane and thereby provide peptide accessibility to the inner membrane. The results underline the importance of tryptophan and arginine residues and their relative location for a high antimicrobial effect, and the activity-modulating function of the outer membrane of E. coli. In addition to membrane permeabilization, the data provided evidence for the involvement of other mechanisms in growth inhibition and killing of bacteria.

Solid-phase peptide synthesis: from standard procedures to the synthesis of difficult sequences.

This protocol for solid-phase peptide synthesis (SPPS) is based on the widely used Fmoc/tBu strategy, activation of the carboxyl groups by aminium-derived coupling reagents and use of PEG-modified polystyrene resins. A standard protocol is described, which was successfully applied in our lab for the synthesis of the corticotropin-releasing factor (CRF), >400 CRF analogs and a countless number of other peptides. The 41-mer peptide CRF is obtained within approximately 80 working hours. To achieve the so-called difficult sequences, special techniques have to be applied in order to reduce aggregation of the growing peptide chain, which is the main cause of failure for peptide chemosynthesis. Exemplary application of depsipeptide and pseudoproline units is shown for synthesizing an extremely difficult sequence, the Asn(15) analog of the WW domain FBP28, which is impossible to obtain using the standard protocol.

Synthesis of a chiral amino acid with bicyclo[1.1.1]pentane moiety and its incorporation into linear and cyclic antimicrobial peptides.

The synthesis of the lipophilic chiral amino acid 1 bearing the bicyclo[1.1.1]pentane moiety is described. Linear and cyclic hexapeptides of the type Arg-Arg-Xaa-Yaa-Arg-Phe containing 1 instead of one or two tryptophan residues are prepared by solid phase peptide synthesis and the antimicrobial and hemolytic activity of the peptides obtained are discussed.

Synthesis of biologically active peptide nucleic acid-peptide conjugates by sortase-mediated ligation.

Sortase A is a transpeptidase that cleaves at a pentapeptide-motif and subsequently transfers the acyl component to a nucleophile containing N-terminal oligoglycines. We investigate the reaction conditions of the sortase-mediated ligation and demonstrate a useful application by the synthesis of a peptide nucleic acid-cell-penetrating peptide chimera, the reaction equilibrium of which can be shifted in favor of the product by dialyzing out the low molecular weight byproduct. The synthesized conjugate exhibits dose-dependent antisense activity.

A simple fluorescence-spectroscopic membrane translocation assay.

We have established a combination of fluorescence-spectroscopic uptake, release, and dilution experiments as a powerful tool for studying the translocation of fluorescent compounds across lipid membranes, demonstrating this through intrinsic tryptophan fluorescence for the interaction of the cell-penetrating peptide penetratin with phospholipid membranes, for which conflicting results have been reported. We found that penetratin is not membrane-permeant under the conditions used here. To confirm this finding and to validate the approach, we also employed an established titration-calorimetric method, the results of which were in excellent agreement with a thermodynamic analysis of the fluorescence-spectroscopic experiments. Further support was provided by a comparison with published data obtained under similar conditions by using a variety of techniques. Unlike these methods, however, the new approach allows consistent and simultaneous assessment of membrane binding and transbilayer movement without depending on extrinsic labels attached to the molecule of interest or on reporter moieties inserted into the lipid membrane.

Structural requirements for cellular uptake and antisense activity of peptide nucleic acids conjugated with various peptides.

Peptide nucleic acids (PNAs) have shown great promise as potential antisense drugs; however, poor cellular delivery limits their applications. Improved delivery into mammalian cells and enhanced biological activity of PNAs have been achieved by coupling to cell-penetrating peptides (CPPs). Structural requirements for the shuttling ability of these peptides as well as structural properties of the conjugates such as the linker type and peptide position remained controversial, so far. In the present study an 18mer PNA targeted to the cryptic splice site of a mutated beta-globin intron 2, which had been inserted into a luciferase reporter gene coding sequence, was coupled to various peptides. As the peptide lead we used the cell-penetrating alpha-helical amphipathic peptide KLAL KLAL KAL KAAL KLA-NH2 [model amphipathic peptide (MAP)] which was varied with respect to charge and structure-forming properties. Furthermore, the linkage and the localization of the attached peptide (C- vs N-terminal) were modified. Positive charge as well as helicity and amphipathicity of the KLA peptide was all required for efficient dose-dependent correction of aberrant splicing. The highest antisense effect was reached within 4 h without any transfection agent. Stably linked conjugates were also efficient in correction of aberrant splicing, suggesting that a cleavable disulfide bond between CPP and PNA is clearly not essential. Moreover, the placement of the attached peptide turned out to be crucial for attaining antisense activity. Coadministration of endosome disrupting agents such as chloroquine or Ca2+ significantly increased the splicing correction efficiency of some conjugates, indicating the predominant portion to be sequestered in vesicular compartments.

Depsipeptide methodology for solid-phase peptide synthesis: circumventing side reactions and development of an automated technique via depsidipeptide units.

The depsipeptide technique is a recently developed method for peptide synthesis which is applicable to difficult sequences when the synthetic difficulty arises because of aggregation phenomena. In the present work, application of the depsipeptide method to extremely difficult sequences has been demonstrated and a serious side reaction involving diketopiperazine formation uncovered and subsequently avoided by the appropriate use of the Bsmoc protecting group. Many other aspects of the technique have been investigated, such as the stability of the depsi units during assembly and workup procedures, the completeness of the O-acylation step, the occurrence of epimerization of the amino acid activated during O-acylation, and the nature of side products formed. In addition, the method was modified so as to allow for completely automated syntheses of long-chain depsipeptides without the need for any interruption by manual esterification procedures. Finally, the synthesis efficiency of the new depsipeptide technique was shown to be comparable to that of the well-known pseudoproline technique.

Dipalmitoylation of a cellular uptake-mediating apolipoprotein E-derived peptide as a promising modification for stable anchorage in liposomal drug carriers.

Liposomes equipped with cellular uptake-mediating peptidic vector compounds have attracted much attention as target-specific drug delivery systems. Aside from the development of the target recognition motif itself, vector coupling to liposomes while conserving the active conformation constitutes an important element in carrier development. To elucidate the most efficient way for adsorptive peptide binding to liposomes, we synthesized and characterized two-domain peptides comprising a cationic sequence derived from the binding domain of apolipoprotein E (apoE) for the low-density lipoprotein receptor and different lipid-binding motifs, that is, an amphipathic helix, a transmembrane helix, single fatty acids or two palmitoyl chains. Peptide properties considered relevant for peptide-liposome complexes to initiate an endocytotic cellular uptake such as lipid binding, helicity, stability of anchorage, bilayer-disturbing activity, and toxicity showed that the dipalmitoyl derivative was the most suitable to associate the apoE peptide to the surface of liposomes. The peptide showed pronounced lipid affinity and was stably anchored within the lipid bilayer on a time scale of at least 30 min. The helicity of about 40% in the lipid-bound state and the location of the amphipathic helix on the liposomal surface provided the prerequisites for interaction of the complex with the cell surface-located receptor. The concentration of the dipalmitoylated peptide to permeabilize neutral lipid bilayers (lipid concentration 25 microM) was 0.06 microM and a 2 microM concentration reduced cell viability to about 80%. Efficient internalization of liposomes bearing about 180 peptide derivatives on the surface into brain capillary endothelial cells was monitored by confocal laser scanning microscopy. The concept of complexation using dipalmitoylated peptides may offer an efficient substitute to covalent vector coupling and a prospective way to optimize the capacity of liposomes as drug delivery systems also for different targets.

Probing the ligand-binding specificity and analyzing the folding state of SPOT-synthesized FBP28 WW domain variants.

The WW domains are known as the smallest naturally occurring, monomeric, triple-stranded, antiparallel beta-sheet domains. Hence, we chose the FBP28 WW domain as a model to investigate the stability of the beta-sheet structure at the amino acid level in the context of its function (ligand binding). The structure-function relationship was investigated through a complete substitution analysis of the FBP28 WW domain, with variants synthesized as a cellulose-bound peptide array. The functionality of the FBP28 WW domain variants was examined by probing the peptide array for ligand binding. In addition, selected FBP28 WW domain variants were investigated by CD measurements to determine the stability of the antiparallel beta-sheet structure. We discuss the correlation between structure stability and functionality for the FBP28 WW domain, as well as the effect of ligand-induced structure stabilization.

Photoaffinity cross-linking of the corticotropin-releasing factor receptor type 1 with photoreactive urocortin analogues.

Interaction of natural peptide ligands with class 2 GPCRs, which are targets of biologically important hormones such as glucagon, secretin, and corticotropin-releasing factor (CRF), occurs with a common orientation, in that the ligand C-terminus binds to the extracellular receptor N-terminus, whereas the ligand N-terminus binds to the receptor juxtamembrane domain. N-Terminal truncation, by eight amino acids in the case of CRF, leads to antagonists, suggesting those residues constitute the receptor activating sequence. Here, we identified by photoaffinity cross-linking using p-benzoyl-l-phenylalanine (Bpa) analogues of urocortin (Ucn) the most affine CRF receptor agonist, interaction domains of CRF(1) receptor with Bpa residues at exclusive positions. Specific cleavage patterns of the corresponding ligand-receptor complexes, obtained using several cleavage methods in combination with SDS-PAGE for fragment size determination, showed that a Bpa group located N-terminally or in position 12 binds at the second and such in position 17 or 22 at the first extracellular receptor loop. Our results indicate that the very N-terminal ligand residues (1-11), which are responsible for receptor activation, are oriented to the juxtamembrane domain by interaction of amino acid residues 12, 17, and 22. Our findings contradict a recently proposed interaction model derived from ligand interaction with a soluble receptor N-terminus, indicating that conclusions drawn from such a reduced system may be of limited value to understand the interaction with the full-length receptor.