Rheological and low field NMR characterization of hydrophobically-modified PEG hydrogels for drug delivery.

The focus of this work is on the characterization of hydrophobically-modified polyethylene glycol hydrogels, to be used as drug delivery systems, by means of the combined used of rheology and low field Nuclear Magnetic Resonance. Indeed, these two techniques allowed understanding how the transient physical bonds deriving from hydrophobic association superimpose to the pre-existing covalent bonds. We found that the improvement of physical bonds can be achieved not only by increasing the content of hydrophobic segments but also by using thermal treatments after hydrogel preparation. Moreover, we proved the reliability of an overall interpretative model linking the dependence of the shear modulus and the average magnetic relaxation time. Finally, we proposed a new mathematical approach for the determination of the magnetic relaxation spectrum. This approach reduced the computational heaviness of the procedure and allowed to easily discern the different contributes nested in the overall magnetic relaxation spectrum, an aspect that the traditional approach cannot provide directly.

Hydrophobically-Modified PEG Hydrogels with Controllable Hydrophilic/Hydrophobic Balance.

This work reports on a novel method to synthesize hydrophobically-modified hydrogels by curing epoxy monomers with amines. The resulting networks contain hydrophilic poly(ethylene glycol) (PEG) segments, poly(propylene glycol) (PPG) segments, and C18 alkyl segments. By varying the content of C18 segments, networks with different hydrophilic-lipophilic balance (HLB) are obtained. All networks show an amphiphilic behavior, swelling considerably both in organic solvents and in aqueous media. In the latter they display a thermosensitive behavior, which is highly affected by the network HLB and the pH of the solution. A decrease in HLB results in an increment of the polymer weight content (wp) due to hydrophobic association. Furthermore, a reduction in HLB induces a remarkable increase in initial modulus, elongation at break and tensile strength, especially when wp becomes greater than about 10%. Low field nuclear magnetic resonance (LF-NMR) experiments evidence that, when HLB decreases, a sudden and considerable increase in hydrogel heterogeneity takes place due to occurrence of extensive physical crosslinking. Available data suggest that in systems with wp ≳ 10% a continuous physical network superimposes to the pre-existing chemical network and leads to a sort of double network capable of considerably improving hydrogel toughness.

Rheological Characterization of Ethylcellulose-Based Melts for Pharmaceutical Applications.

Rheological characterization of ethylcellulose (EC)-based melts intended for the production, via micro-injection moulding (µIM), of oral capsular devices for prolonged release was carried out. Neat EC, plasticized EC and plasticized EC containing solid particles of a release modifier (filler volume content in the melt around 30%) were examined by capillary and rotational rheometry tests. Two release modifiers, differing in both chemical nature and particle geometry, were investigated. When studied by capillary rheometry, neat EC appeared at process temperatures as a highly viscous melt with a shear-thinning characteristic that progressively diminished as the apparent shear rate increased. Thus, EC as such could not successfully be processed via µIM. Plasticization, which induces changes in the material microstructure, enhanced the shear-thinning characteristic of the melt and reduced considerably its elastic properties. Marked wall slip effects were noticed in the capillary flow of the plasticized EC-based melts, with or without release modifier particles. The presence of these particles brought about an increase in viscosity, clearly highlighted by the dynamic experiments at the rotational rheometer. However, it did not impair the material processability. The thermal and rheological study undertaken would turn out a valid guideline for the development of polymeric materials based on pharma-grade polymers with potential for new pharmaceutical applications of µIM.

Autonomic self-healing in epoxidized natural rubber.

The development of polymers that can repair damage autonomously would be useful to improve the lifetime of polymeric materials. To date, limited attention has been dedicated to developing elastomers with autonomic self-healing ability, which can recover damages without need for an external or internal source of healing agents. This work investigates the self-healing behavior of epoxidized natural rubber (ENR) with two different epoxidation levels (25 and 50 mol % epoxidation) and of the corresponding unfunctionalized rubber, cis-1,4-polyisoprene (PISP). A self-adhesion assisted self-healing behavior was revealed by T-peel tests on slightly vulcanized rubbers. A higher epoxidation level was found to enhance self-healing. Self-healing of rubbers following ballistic damages was also investigated. A pressurized air flow test setup was used to evaluate the self-healing of ballistic damages in rubbers. Microscope (OM, SEM, and TEM) analyses were carried out to provide further evidence of healing in the impact zones. Self-healing of ballistic damages was observed only in ENR with 50 mol % epoxidation and it was found to be influenced significantly by the cross-link density. Finally, self-healing of ballistic damages was also observed in ENR50/PISP blends only when the content of the healing component (i.e., ENR50) was at least 25 wt %. From an analysis of the results, it was concluded that a synergistic effect between interdiffusion and interaction among polar groups leads to self-healing in ENR.

Detection by circular dichroism of conformational transitions in pH and thermosensitive copolymers based on N-isopropylacrylamide and N-methacryloyl-L-leucine.

Circular dichroism (CD) spectra in the region of 210-250 nm allow visualization of intrachain phase transition of pH- and thermosensitive polyelectrolytes. Indeed, in 0.001 M citrate and acetate buffers, at pH 4.0-5.5, aqueous solutions of a poly(N-isopropylacrylamide-co-N-methacryloyl-L-leucine) (NIPAAm-MALEU) copolymer containing 90.9 mol% of NIPAAm residues exhibit a well-defined sigmoidal increase in the CD signal at 220 nm with increasing temperature. This phenomenon is suggestive of a highly cooperative transition which occurs at lower temperatures compared to that observed by cloud point measurements. The change in the CD signal is less sharp at higher pH, indicating varying cooperativity with pH. For pH 6.0 and higher, no such phenomena are observed.

Development of multicomponent DNA delivery systems based upon poly(amidoamine)-PEG co-polymers.

PEGylated polyamidoamine (PAA) polymers were investigated for the production of sterically stabilised DNA delivery systems. Comparison of a PEGylated polymer (NG47) with a non-PEGylated polymer (NG49) showed similar binding of co-polymer to DNA by displacement of ethidium bromide (EB) and DNA melting studies. Gel electrophoresis, turbidimetric analysis and PCS demonstrated differences in the colloidal properties of the complexes, which were attributable to the formation of soluble complexes by the PEGylated co-polymer. However, transmission electron microscopy (TEM) showed that the resulting complexes containing poly(ethylene glycol) (PEG) were not well condensed, susceptible to degradation by nucleases, and thus not suited for in vivo delivery. The poor properties of the PEGylated co-polymer were attributed to an excess of PEG. However, polymer blends of NG47 and NG49 at defined ratios of polymer to co-polymer and total repeating units (RUs) to nucleotide, spontaneously formed complexes with a range of desirable properties. These included small size and polydispersity, high particle density, low surface charge and resistance to nuclease degradation. Complexes made with PEGylated polymer alone, and the polymer blends both suffered from a reduced polyfection activity. This was attributed to a low surface charge on the complex, which reduced interactions with the cell membrane and consequent uptake of the particles into the cell.