Estimated coefficient of variation values for sample size planning in bioequivalence studies.

OBJECTIVE: The aim of the present communication is to provide information regarding the intrasubject coefficent of variation obtained from 30 bioequivalence studies covering 16 drugs which can be used for estimation of sample size. Additionally, an attempt was also made to estimate the test power of each of the studies conducted. METHODS: The intrasubject coefficient of variation was estimated from the residual mean square error obtained from analysis of variance of the parameters AUC0-infinity, Cmax and Cmax/AUC0-infinity after logarithmic transformation. The test power in the analyses of the above parameters was subsequently estimated using nomograms provided by Diletti et al. [1991]. RESULTS AND CONCLUSION: Thirty products covering 16 drugs were studied in which 22 were immediate-release (including one dispersible tablet) and 8 were sustained-release formulations. The intrasubject coefficient of variation for the parameter AUC0-infinity was smaller than Cmax, and hence considerably more studies were able to attain a power of greater than 80% using 12 volunteers for the AUC0-infinity, compared to the Cmax. However, the variability in the Cmax could be reduced by using the parameter Cmax/ AUC0-infinity, and thus, provide a more realistic estimation of sample size, since the latter reflects only the rate of absorption and not both the rate and extent as in the case of Cmax [Endrenyi et al. 1991].

Gamma-scintigraphic study of the gastrointestinal transit and in vivo dissolution of a controlled release diclofenac sodium formulation in xanthan gum matrices.

A xanthan gum matrix controlled release tablet formulation containing diclofenac sodium was evaluated in vitro and was found to release the drug at a uniform rate. The gastrointestinal transit behaviour of the formulation as determined by gamma scintigraphy, using healthy male volunteers under fasted and fed conditions, indicated that gastric emptying was delayed with food intake. In contrast, the small intestinal transit remained practically unchanged under both food statuses. Therefore, the delay in caecal arrival observed in the fed state can be attributed to the delay in gastric emptying. Rate of diclofenac sodium absorption was generally higher in the fed state compared to the fasted state, however the total amount absorbed under both food statuses remained practically the same. The rate of in vivo dissolution of the drug in the fed state was faster compared to that in the fasted state. Thus, at the time of caecal arrival, in vivo dissolution was complete in the fed state, unlike in the fasted state, where almost 60% of the drug was delivered to the colon.

Formulation variables affecting drug release from xanthan gum matrices at laboratory scale and pilot scale.

The purpose of this research was to study processing variables at the laboratory and pilot scales that can affect hydration rates of xanthan gum matrices containing diclofenac sodium and the rate of drug release. Tablets from the laboratory scale and pilot scale proceedings were made by wet granulation. Swelling indices of xanthan gum formulations prepared with different amounts of water were measured in water under a magnifying lens. Granules were thermally treated in an oven at 60 degrees C, 70 degrees C, and 80 degrees C to study the effects of elevated temperatures on drug release from xanthan gum matrices. Granules from the pilot scale formulations were bulkier compared to their laboratory scale counterparts, resulting in more porous, softer tablets. Drug release was linear from xanthan gum matrices prepared at the laboratory scale and pilot scales; however, release was faster from the pilot scales. Thermal treatment of the granules did not affect the swelling index and rate of drug release from tablets in both the pilot and laboratory scale proceedings. On the other hand, the release from both proceedings was affected by the amount of water used for granulation and the speed of the impeller during granulation. The data suggest that processing variables that affect the degree of wetness during granulation, such as increase in impeller speed and increase in amount of water used for granulation, also may affect the swelling index of xanthan gum matrices and therefore the rate of drug release.

Bioequivalence of a generic metformin tablet preparation.

OBJECTIVE: The bioavailability of a generic preparation of metformin (Diabetmin from Hovid Sdn Bhd) was evaluated in comparison with a proprietary product (Glucophage from Lipha Pharma Ltd., UK). PATIENTS AND METHODS: Twenty-four healthy male volunteers participated in the study conducted according to a two-way crossover design. The bioavailability was compared using the parameters total area under the plasma concentration-time curve (AUC0-infinity), peak plasma concentration (Cmax and time to reach peak plasma concentration (Tmax). RESULTS: No statistically significant difference was observed between the values of the two products in all three parameters. Moreover, the 90% confidence interval for the ratio of the logarithmic-transformed AUC0-infinity and Cmax values of Diabetmin over those of Glucophage was found to lie between 0.94-1.03 and 0.94-1.06, respectively, being within the acceptable bioequivalence limit of 0.80-1.25. CONCLUSION: These findings indicate that the two preparations are comparable in the extent and rate of absorption. In addition, elimination rate constant (k(e)) and apparent volume of distribution (Vd) were calculated. There was no statistically significant difference between the values of the two preparations in the k(e) and Vd. Moreover, the values are comparable to those reported in the literature.

Comparative bioavailability study of a generic naltrexone tablet preparation.

The bioavailability of a generic preparation of naltrexone (Narpan) was compared with the innovator product, Trexan. Twelve healthy volunteers participated in the study, conducted according to a completely randomized, two-way crossover design. The preparations were compared using the parameters area under the plasma concentration-time curve AUC0-infinity, peak plasma concentration Cmax, and time to reach peak plasma concentration Tmax. No statistically significant difference was observed between the logarithmic transformed AUC0-infinity and the logarithmically transformed Cmax values of the two preparations. Also, no statistically significant difference was observed between the untransformed Tmax values. In addition, the 90% confidence interval for the ratio of the logarithmic transformed AUC0-infinity values of Narpan over those of Trexan was found to lie between 0.87 and 1.01, while that of the logarithmic transformed Cmax values was between 0.94 and 1.23, both being within the bioequivalence limit of 0.80-1.25. The numerical values of the elimination half-life (t1/2) obtained with the two preparations were also not significantly different and were comparable to those reported in the literature.

Comparative bioavailability study of two ketoconazole tablet preparations.

The bioavailability of a generic preparation of ketoconazole (Zorinax from Xepa-Soul Pattinson, Malaysia) was evaluated in comparison with the innovator product (Nizoral from Janssen Pharmaceutica, Switzerland). Eighteen healthy male volunteers participated in the study conducted according to a two-way crossover design. The bioavailability was compared using the parameters, total area under the plasma concentration-time curve (AUC0-infinity), peak plasma concentration (Cmax) and time to reach peak plasma concentration (Tmax). No statistically significant difference was observed between the values of the two products in all the three parameters. Moreover, the 90% confidence interval for the ratio of the logarithmic transformed AUC0-infinity and Cmax values of Zorinax over Nizoral was found to lie between 0.82-1.04 and 0.83-1.02, respectively, being within the acceptable equivalence limit of 0.80-1.25. These findings indicate that the two preparations are comparable in the extent and rate of absorption. In addition, the elimination rate constant (ke) and apparent volume of distribution (Vd) were calculated. For both parameters, there was no statistically significant difference between the values obtained from the data of the two preparations. Moreover, the values are comparable to those reported in the literature.

Bioavailability and pharmacokinetics of acyclovir tablet preparation.

The bioavailability of a generic preparation of acyclovir (Avorax) was compared with the innovator product, Zovirax. Twelve healthy volunteers participated in the study, conducted according to a randomized, two-way crossover design. The preparations were compared using the parameters area under the plasma concentration time curve (AUC(0-infinity), peak plasma concentration (Cmax), and time to reach peak plasma concentration (Tmax). No statistically significant difference was observed between the Tmax or the logarithmic transformed AUC(0-infinity) and C(max) values of the two preparations. In addition, the 90% confidence interval for the ratio of the logarithmic transformed AUC(0-infinity) values of Avorax over those of Zovirax was found to lie between 0.85 and 1.06, while that of the logarithmic transformed Cmax values was between 0.95 and 1.25, being within the bioequivalence limit of 0.80-1.25. Moreover, the elimination rate constant (k(e)), elimination half-life (t(1/2)), and apparent volume of distribution (Vd) values obtained with the two preparations were comparable and not significantly different statistically.

Diclofenac release from eudragit-containing matrices and effects of thermal treatment.

Ethyl acrylate-methyl methacrylate copolymer (Eudragit NE40D) was evaluated as matrix material for preparing controlled-release tablets of diclofenac sodium. Drug release could be modified in a predictable manner by varying the Eudragit NE40D content, but was pH dependent, being markedly reduced at lower pH. This could be attributed to the low solubility of the drug at these pH values. Thermal treatment of the tablets at 60 degrees C was also found to affect the rate of drug release, which was found to decrease with an increase in the treatment duration, but could be stabilized after 96 hr of treatment. This was also associated with a corresponding increase in the tablet tensile strength. However, treatment of the granules for 5 hr prior to compaction into tablets could shorten the stabilizing time of the drug release to 48 hr and that of the tensile strength to 24 hr. The effect of thermal treatment may be ascribed to better coalescence of the Eudragit particles to form a fine network, resulting in matrix of higher tortuosity and lower porosity.

Simple liquid chromatographic method for the determination of naltrexone in human plasma using amperometric detection.

A simple liquid chromatographic method using amperometric detection was developed for the determination of naltrexone in human plasma. Prior to analysis, naltrexone and the internal standard (naloxone) were extracted from plasma samples using a 9:1 mixture of chloroform and isopropyl alcohol. The mobile phase comprised 0.1 M disodium hydrogen orthophosphate (pH 3.5) and acetonitrile (85.5:14.5, v/v). Analysis was run at a flow-rate of 0.8 ml/min with the detector operating under oxidative mode at an applied potential of +0.95 V. The method is specific and sensitive with a detection limit of approximately 1 ng/ml at a signal-to-noise ratio of 3:1. Mean recovery value of the extraction procedure was about 93%, while the within day and between day coefficient of variation and percent error values of the assay method were all less than 10%. The calibration curve was linear over a concentration range of 1.5-100 ng/ml.