Enhance the oral insulin delivery route using a modified chitosan-based formulation fabricated by microwave.

Chitosan (Cs) was subjected to ball milling and subsequently functionalized with Dinitro salicylic acid (Cs-DNS) to enhance the efficacy of oral insulin delivery. The hydrodynamic spherical particle sizes exhibited 33.29 ± 5.08 nm for modified Cs-DNS NPs. Irrespective of insulin entrapment, zeta potential measurements revealed positively charged Cs-DNS NPs (+ 35 ± 3.5 mV). The entrapment performance (EP%) was evaluated in vitro, and insulin release patterns at various pH levels. The EP% for Cs-DNS NPs was 99.3 ± 1.6. Cs- DNS NPs retained a considerable amount of insulin (92 %) in an acidic medium, and significant quantities were released at increasing pH values over time. In vivo investigations, the diabetic rats which taken insulin-incorporated NPs had lower serum glucose levels (SGL) after 3 h to (39.4 ± 0.6 %) for Cs- DNS NPs. For insulin-incorporated Cs- DNS NPs, the bioavailability (BA%) and pharmacological availability (PA%) were 17.5 ± 0.31 % and 8.6 ± 0.8 %, respectively. The assertion above highlights the significance and effectiveness of modified chitosan in promoting insulin delivery, decreasing SGL levels, and guaranteeing safety.

Carboxymethyl cellulose mediated growth of V2O5 nanorod by green strategy for energy storage utilization using electrochemical studies.

Vanadium pentoxide has the most exciting oxidation states, but, Vanadium pentoxide (V2O5) has low capacitance due to poor electrical conductivity and ionic diffusivity. So, encapsulating pentoxide in carbonaceous materials or metals, shrinking it to the nanoscale, or changing its morphology can improve capacitance performance. Herein, we describe a green synthesis of V2O5NPs with carboxymethyl cellulose (CMC) that typically acts as a reducing and stabilizing agent using the -COOH and -OH group. The physicochemical characterization of prepared samples reveals the prominent peak in UV-vis spectra at 265 nm confirming the formation of V2O5NPs with particle sizes between 200 and 220 nm. The theoretical surface area for the nanocomposite was 76.5 m2/g. The calcination temperature is essential to determine a material's specific capacitance. Due to decreased oxide agglomeration, the V2O5-green modified electrode exhibits superior electrochemical performance around 223 F g-1 than Ac alone (160 F g-1). The finding demonstrated excellent cyclic stability with reduced fluctuation in capacitance. Because of its exceptional electrochemical performance and simplicity of access, this AC/V2O5 nanocomposite can be helpful as an electrode for energy storage applications.

The Design of Ternary Composite Polyurethane Membranes with an Enhanced Photocatalytic Degradation Potential for the Removal of Anionic Dyes.

Photocatalysis is an efficient and an eco-friendly way to eliminate organic pollutants from wastewater and filtration media. The major dilemma coupled with conventional membrane technology in wastewater remediation is fouling. In this study, the photocatalytic degradation potential of novel thermoplastic polyurethane (TPU) based NiO on aminated graphene oxide (NH2-GO) nanocomposite membranes was explored. The fabrication of TPU-NiO/NH2-GO membranes was achieved by the phase inversion method and analyzed for their performances. The membranes were effectively characterized in terms of surface morphology, functional group, and crystalline phase identification, using scanning electron microscopy, Fourier transformed infrared spectroscopy, and X-ray diffraction analysis, respectively. The prepared materials were investigated in terms of photocatalytic degradation potential against selected pollutants. Approximately 94% dye removal efficiency was observed under optimized conditions (i.e., reaction time = 180 min, pH 3-4, photocatalyst dose = 80 mg/100 mL, and oxidant dose = 10 mM). The optimized membranes possessed effective pure water flux and excellent dye rejection (approximately 94%) under 4 bar pressure. The nickel leaching in the treated wastewater sample was determined using inductively coupled plasma-optical emission spectrometry (ICP-OES). The obtained data was kinetically analyzed using first- and second-order reaction kinetic models. A first-order kinetic study was suited for the present study. Besides, the proposed membranes provided excellent photocatalytic ability up to six reusability cycles. The combination of TPU and NH2-GO provided effective strength to membranes and the immobilization of NiO nanoparticles improved the photocatalytic behavior.