RESUMO
PURPOSE: To measure the hardness of two types of urinary stones: calcium oxalate monohydrate (COM; CaC2O4 . H2O) and dicalcium phosphate dihydrate (brushite; CaHPO4 . 2H2O). MATERIALS AND METHODS: The composition of 28 calcium oxalate monohydrate and 22 brushite stones was characterized by infrared spectroscopy (FT-IR). Stone specimens were embedded in crystallographic resin, polished, and subjected to indentation tests using a Vickers tester. The hardness was calculated from measuring the diagonal lengths of the residual indentation on the specimen using the appropriate equation. RESULTS: The COM stones showed hardness values ranging from 15.3 to 64.2 HV with a mean of 35.8 +/- 13.3, while brushite stones ranged from 10.1 to 46.1 HV with a mean of 26.5 +/- 15.1. The results of ANOVA showed that there were significant differences (P < 0.05) between the two stone types. CONCLUSIONS: Calcium oxalate monohydrate stones exhibited greater hardness than brushite stones when assessed with Vickers studies.
Assuntos
Oxalato de Cálcio/análise , Fosfatos de Cálcio/análise , Cálculos Urinários/química , Dureza , Humanos , Técnicas In Vitro , Microscopia Eletrônica de Varredura , Espectroscopia de Infravermelho com Transformada de Fourier , Cálculos Urinários/ultraestruturaRESUMO
PURPOSE: To investigate the viscoelastic properties of plastic pigtail stents after removal from patients using the method of dynamic mechanical analysis (DMA). MATERIALS AND METHODS: Dynamic mechanical analysis was performed in 12 polymeric pigtail stents left indwelling for various periods of time (0-120 days). The encrustations were characterized by infrared spectroscopy, and their morphology was observed using scanning electron microscopy. RESULTS: Softening and stiffening behavior was observed. Stiffening was found specifically in the stents with heavy mineral deposits. CONCLUSIONS: Material degradation becomes obvious after certain periods of time. The effect of stent degradation appeared in two forms: softening of the stent polymer, possibly through interaction with urine, and stiffening of the stent secondary to the formation of various insoluble mineral deposits covered by layers of organic matrix.
Assuntos
Materiais Biocompatíveis , Polímeros , Stents , Desenho de Equipamento , Humanos , Técnicas In Vitro , Mecânica , Microscopia Eletrônica de Varredura , Espectroscopia de Infravermelho com Transformada de Fourier , Cálculos Ureterais/química , Cálculos Ureterais/ultraestruturaRESUMO
PURPOSE: To determine the composition and the extent of crystalline (and other) encrustation on ureteral catheters inserted under sterile conditions in stone formers, in comparison with catheters of the same type inserted in nonstone formers for the same time but for different clinical reasons. MATERIALS AND METHODS: Forty consecutive self-retained polyurethane pigtail ureteral catheters removed by cystoscopy between November 2000 and February 2002 were studied, 30 from stone formers and 10 from patients without stone histories. The mean dwelling time was 55 days for the stone formers and 79 days for the other patients. The encrustations were collected and analyzed with Fourier-transform infrared spectroscopy, powder X-ray diffraction, or both. The stones from nine of the patients were also subjected to the same spectroscopic analysis. Representative sections of the catheters were investigated by scanning electron microscopy and energy-dispersive X-ray analysis. RESULTS: The most common encrustation in stone formers was calcium oxalate monohydrate. In patients without stones, deposits of organic compounds were found consistently. The mean mass of encrustation of stone formers was larger (71.05 mg) than that of patients without stones (1 mg). CONCLUSIONS: Calcium oxalate is the predominant type of encrustation on ureteral catheters in stone formers. Prevention of heavy encrustation should be directed to therapeutic measures concerning calcium oxalate lithiasis and development of new materials by the medical industry that are less prone to encrustation.