Ultrafast high-repetition imaging of fuel sprays using picosecond fiber laser.

Modern diesel injectors operate at very high injection pressures of about 2000 bar resulting in injection velocities as high as 700 m/s near the nozzle outlet. In order to better predict the behavior of the atomization process at such high pressures, high-resolution spray images at high repetition rates must be recorded. However, due to extremely high velocity in the near-nozzle region, high-speed cameras fail to avoid blurring of the structures in the spray images due to their exposure time. Ultrafast imaging featuring ultra-short laser pulses to freeze the motion of the spray appears as an well suited solution to overcome this limitation. However, most commercial high-energy ultrafast sources are limited to a few kHz repetition rates. In the present work, we report the development of a custom-designed picosecond fiber laser generating ∼ 20 ps pulses with an average power of 2.5 W at a repetition rate of 8.2 MHz, suitable for high-speed imaging of high-pressure fuel jets. This fiber source has been proof tested by obtaining backlight images of diesel sprays issued from a single-orifice injector at an injection pressure of 300 bar. We observed a consequent improvement in terms of image resolution compared to standard white-light illumination. In addition, the compactness and stability against perturbations of our fiber laser system makes it particularly suitable for harsh experimental conditions.

Collinear, two-color optical Kerr effect shutter for ultrafast time-resolved imaging.

Imaging with ultrashort exposure times is generally achieved with a crossed-beam geometry. In the usual arrangement, an off-axis gating pulse induces birefringence in a medium exhibiting a strong Kerr response (commonly carbon disulfide) which is followed by a polarizer aligned to fully attenuate the on-axis imaging beam. By properly timing the gate pulse, imaging light experiences a polarization change allowing time-dependent transmission through the polarizer to form an ultrashort image. The crossed-beam system is effective in generating short gate times, however, signal transmission through the system is complicated by the crossing angle of the gate and imaging beams. This work presents a robust ultrafast time-gated imaging scheme based on a combination of type-I frequency doubling and a collinear optical arrangement in carbon disulfide. We discuss spatial effects arising from crossed-beam Kerr gating, and examine the imaging spatial resolution and transmission timing affected by collinear activation of the Kerr medium, which eliminates crossing angle spatial effects and produces gate times on the order of 1 ps. In addition, the collinear, two-color system is applied to image structure in an optical fiber and a gasoline fuel spray, in order to demonstrate image formation utilizing ballistic or refracted light, selected on the basis of its transmission time.

Time gate, optical layout, and wavelength effects on ballistic imaging.

A method to distinguish a hidden object from a perturbing environment is to use an ultrashort femtosecond pulse of light and a time-resolved detection. To separate ballistic light containing information on a hidden object from multiscattered light coming from the surrounding environment that scrambles the signal, an optical Kerr gate can be used. It consists of a carbon disulfide (CS(2)) cell in which birefringence is optically induced. An imaging beam passes through the studied medium while a pump pulse is used to open the gate. The time-delayed scattered light is excluded from measurements by the gate, and the multiple-scattering scrambling effect is reduced. In previous works, the two beams had the same wavelength. We propose a new two-color experimental setup for ballistic imaging in which a second harmonic is generated and used for the image, while the fundamental is used for gate switching. This setup allows one to obtain better resolution by using a spectral filtering to eliminate noise from the pump pulse, instead of a spatial filtering. This new setup is suitable for use in ballistic imaging of dense sprays, multidiffusive, and large enough to show scattered light time delays greater than the gate duration (tau=1.3 ps).