Advances in the Chemical Stabilization of MXenes.

MXenes are 2D nanomaterials with a wide array of possible compositions; they feature a unique combination of properties such as high electrical conductivity, hydrophilicity, and colloidal stability which makes them attractive for a variety of applications. However, the shelf life and industrial utility of MXenes face challenges due to their tendency to oxidize and disintegrate, particularly in dispersions. Thus, it is crucial to find effective ways to ensure the degradation stability of MXenes. This feature article reviews the key factors affecting the degradation of MXenes such as pH, concentration of the dispersion, humidity, and storage temperature. In addition, we review our group's progress in mitigating the degradation of MXenes such as low-temperature storage, the use of antioxidants, and thermal annealing, particularly for Ti3C2Tz. These simple approaches may allow for applications of MXenes on a commercial scale.

Exfoliation, delamination, and oxidation stability of molten salt etched Nb2CTz MXene nanosheets.

Despite numerous prior reports of molten salt etching of MAX phases, few of these reports achieved water-dispersible MXene nanosheets, and none for Nb-based MXenes. Here we demonstrate the synthesis and aqueous dispersibility of Nb2CTZ nanosheets via molten salt etching and utilizing a KOH wash to add hydroxyl surface groups. However, little is known about the oxidation of molten salt etched MXenes compared to acid-etched MXenes. Our results indicate slower oxidation behavior for MXenes etched by molten salts, which may be due to the decreased amount of oxygen-containing terminal groups.

Water-dispersible Ti3C2Tz MXene nanosheets by molten salt etching.

Molten-salt etching of Ti3AlC2 MAX phase offers a promising route to produce 2D Ti3C2Tz (MXene) nanosheets without hazardous HF. However, molten-salt etching results in MXene clays that are not water dispersible, thus preventing further processing. This occurs because molten-salt etching results in a lack of -OH terminal groups rendering the MXene clay hydrophobic. Here, we demonstrate a method that produces water-dispersible Ti3C2Tz nanosheets using molten salt (SnF2) to etch. In molten salt etching, SnF2 diffuses between the layers to form AlF3 and Sn as byproducts, separating the layers. The stable, aqueous Ti3C2Tz dispersion yields a ζ potential of -31.7 mV, because of -OH terminal groups introduced by KOH washing. X-ray diffraction and electron microscopy confirm the formation of Ti3C2Tz etched clay with substantial d-spacing as compared with clay etched with HF. This work is the first to use molten salt etching to successfully prepare colloidally stable aqueous dispersions of Ti3C2Tz nanosheets.