Ammonia borane hydrogen release in ionic liquids.

The rate and extent of H(2)-release from ammonia borane (AB), a promising, high-capacity hydrogen storage material, was found to be enhanced in ionic-liquid solutions. For example, AB reactions in 1-butyl-3-methylimidazolium chloride (bmimCl) (50:50-wt %) exhibited no induction period and released 1.0 H(2)-equiv in 67 min and 2.2 H(2)-equiv in 330 min at 85 degrees C, whereas comparable solid-state AB reactions at 85 degrees C had a 180 min induction period and required 360 min to release approximately 0.8 H(2)-equiv, with the release of only another approximately 0.1 H(2)-equiv at longer times. Significant rate enhancements for the ionic-liquid mixtures were obtained with only moderate increases in temperature, with, for example, a 50:50-wt % AB/bmimCl mixture releasing 1.0 H(2)-equiv in 5 min and 2.2 H(2)-equiv in only 20 min at 110 degrees C. Increasing the AB/bmimCl ratio to 80:20 still gave enhanced H(2)-release rates compared to the solid-state, and produced a system that achieved 11.4 materials-weight percent H(2)-release. Solid-state and solution (11)B NMR studies of AB H(2)-release reactions in progress support a mechanistic pathway involving: (1) ionic-liquid promoted conversion of AB into its more reactive ionic diammoniate of diborane (DADB) form, (2) further intermolecular dehydrocoupling reactions between hydridic B-H hydrogens and protonic N-H hydrogens on DADB and/or AB to form neutral polyaminoborane polymers, and (3) polyaminoborane dehydrogenation to unsaturated cross-linked polyborazylene materials.

Base-promoted ammonia borane hydrogen-release.

The strong non-nucleophilic base bis(dimethylamino)naphthalene (Proton Sponge, PS) has been found to promote the rate and extent of H(2)-release from ammonia borane (AB) either in the solid state or in ionic-liquid and tetraglyme solutions. For example, AB reactions in 1-butyl-3-methylimidazolium chloride (bmimCl) containing 5.3 mol % PS released 2 equiv of H(2) in 171 min at 85 degrees C and only 9 min at 110 degrees C, whereas comparable reactions without PS required 316 min at 85 degrees C and 20 min at 110 degrees C. Ionic-liquid solvents proved more favorable than tetraglyme since they reduced the formation of undesirable products such as borazine. Solid-state and solution (11)B NMR studies of PS-promoted reactions in progress support a reaction pathway involving initial AB deprotonation to form the H(3)BNH(2)(-) anion. This anion can then initiate AB dehydropolymerization to form branched-chain polyaminoborane polymers. Subsequent chain-branching and dehydrogenation reactions lead ultimately to a cross-linked polyborazylene-type product. AB dehydrogenation by lithium and potassium triethylborohydride was found to produce the stabilized Et(3)BNH(2)BH(3)(-) anion, with the crystallographically determined structure of the [Et(3)BNH(2)BH(3)](-)K(+).18-crown-6 complex showing that, following AB nitrogen-deprotonation by the triethylborohydride, the Lewis-acidic triethylborane group coordinated at the nitrogen. Model studies of the reactions of [Et(3)BNH(2)BH(3)](-)Li(+) with AB show evidence of chain-growth, providing additional support for a PS-promoted AB anionic dehydropolymerization H(2)-release process.

Amineborane-based chemical hydrogen storage: enhanced ammonia borane dehydrogenation in ionic liquids.

Ionic liquids are shown to provide advantageous media for amineborane-based chemical hydrogen storage systems. Both the extent and rate of hydrogen release from ammonia borane dehydrogenation are significantly increased at 85, 90, and 95 degrees C when the reactions are carried out in 1-butyl-3-methylimidazolium chloride compared to analogous solid-state reactions. NMR studies in conjunction with DFT/GIAO chemical shift calculations indicate that both polyaminoborane and the diammoniate of diborane, [(NH3)2BH2+]BH4-, are initial products in the reactions.

Electronic properties of mononuclear, dinuclear, and polynuclear cobaltacarboranes: electrochemical and spectroelectrochemical studies.

Electronic interactions and metal-metal communication in a wide range of cobaltacarborane-hydrocarbon complexes containing one to six metal centers, and exhibiting a variety of modes of inter-cage connectivity and molecular architectures, have been investigated via cyclic voltammetry, controlled potential coulometry, and UV-visible spectroelectrochemistry. The properties of mixed-valent Co(III)/Co(IV) and Co(II)/Co(III) species that are generated on oxidation or reduction of dinuclear and polynuclear Co(III) complexes were examined and classified as Robin-Day Class I (localized), Class II (partially delocalized), or Class III (fully delocalized) systems. The extent of metal-metal communication between metallacarborane cage units is strongly influenced by the type of intercage connection (e.g., cage B-B or Cp-Cp); the vertexes involved (equatorial vs apical); the nature of the linking unit, if any; and the presence of substituents on the carborane cages. In multi-tripledecker complexes where three CpCo(C(2)B(3)H(4))CoCp units are linked through a central triethynyl benzene connector, the data suggest that Co-Co electronic communication is extensive (Class III) within individual sandwich units while intersandwich delocalization is weak or absent. An extended Hückel study of CpCoC(2)B(4)H(6) double-decker and CpCo(C(2)B(3)H(5))CoCp triple-decker sandwich model complexes shows significant differences in the orbital contributions involved in the HOMO and LUMO of the former vs the latter type. The calculations afford additional insight into the electronic structures and properties of these systems as elucidated by the experimental studies.

Complexes of Schiff bases and intermediates in the copper-catalyzed oxidative heterocyclization by atmospheric oxygen.

After complexation with copper(II) ions, Schiff bases 1a-d may undergo an oxidative ring closure using atmospheric oxygen to give a number of imidazo[1,5-a]pyridines 2, an imidazo[1,5-a]imidazole 3, and an imidazo[5,1-a]isochinoline 4. This ligand oxidation can be performed with catalytic amounts of copper ions in the reaction. A catalytic cycle for the copper-catalyzed oxidative heterocyclization will be presented together with isolated copper complexes of Schiff bases 1a,b and intermediates 5 and 8 that were found by X-ray structure analyses which confirm this reaction scheme.

The neutrophil lipocalin NGAL is a bacteriostatic agent that interferes with siderophore-mediated iron acquisition.

First identified as a neutrophil granule component, neutrophil gelatinase-associated lipocalin (NGAL; also called human neutrophil lipocalin, 24p3, uterocalin, or neu-related lipocalin) is a member of the lipocalin family of binding proteins. Putative NGAL ligands, including neutrophil chemotactic agents such as N-formylated tripeptides, have all been refuted by recent biochemical and structural results. NGAL has subsequently been implicated in diverse cellular processes, but without a characterized ligand, the molecular basis of these functions remained mysterious. Here we report that NGAL tightly binds bacterial catecholate-type ferric siderophores through a cyclically permuted, hybrid electrostatic/cation-pi interaction and is a potent bacteriostatic agent in iron-limiting conditions. We therefore propose that NGAL participates in the antibacterial iron depletion strategy of the innate immune system.

Corynebactin and a serine trilactone based analogue: chirality and molecular modeling of ferric complexes.

Because the hydrolysis of ferric ion makes it very insoluble in aerobic, near neutral pH environments, most species of bacteria produce siderophores to acquire iron, an essential nutrient. The chirality of the ferric siderophore complex plays an important role in cell recognition, uptake, and utilization. Corynebactin, isolated from Gram-positive bacteria, is structurally similar to enterobactin, a well-known siderophore first isolated from Gram-negative bacteria, but contains L-threonine instead of L-serine in the trilactone backbone. Corynebactin also contains a glycine spacer unit in each of the chelating arms. A hybrid analogue (serine-corynebactin) has been prepared which has the trilactone ring of enterobactin and the glycine spacer of corynebactin. The chirality and relative conformational stability of the three ferric complexes of enterobactin, corynebactin, and the hybrid have been investigated by molecular modeling (including MM3 and pBP86/DN density functional theory calculations) and circular dichroism spectra. While enterobactin forms a Delta-ferric complex, corynebactin is Lambda. The hybrid serine-corynebactin forms a nearly racemic mixture, with the Lambda-conformer in slight excess. Each ferric complex has four possible isomers depending on the metal chirality and the conformation of the trilactone ring. For corynebactin, the energy difference between the two possible Lambda conformations is 2.3 kcal/mol. In contrast, only 1.5 kcal/mol separates the inverted Lambda- and normal Delta-configuration for serine-corynebactin. The small energy difference of the two lowest energy configurations is the likely cause for the racemic mixture found in the CD spectra. Both the addition of a glycine spacer and methylation of the trilactone ring (serine to threonine) favor the Lambda-conformation. These structural changes suffice to change the chirality from all Delta (enterobactin) to all Lambda (corynebactin). The single change (glycine spacer) of the hybrid ferric serine-corynebactin gives a mixture of Delta and Lambda, with the Lambda in slight excess.

Corynebactin and enterobactin: related siderophores of opposite chirality.

Most species of bacteria employ siderophores to acquire iron. The chirality of the ferric siderophore complex plays an important role in cell recognition, uptake, and utilization. Corynebactin, isolated from Gram-positive bacteria, is structurally similar to enterobactin, a well known siderophore isolated from Gram-negative bacteria, but contains L-theronine instead of L-serine in the trilactone backbone. Corynebactin also contains a glycine spacer unit in each of the chelating arms. A hybrid analogue (serine-corynebactin) has been synthesized. The chirality and relative conformational stability of the three ferric complexes of enterobactin, corynebactin, and the hybrid has been investigated. In contrast to enterobactin, corynebactin assumes a Lambda configuration. However, the ferric serine-corynebactin hybrid forms a racemic mixture, only slightly favoring the Lambda conformation.