Proteins from Legumes, Cereals, and Pseudo-Cereals: Composition, Modification, Bioactivities, and Applications.

This review presents a comprehensive analysis of plant-based proteins from soybeans, pulses, cereals, and pseudo-cereals by examining their structural properties, modification techniques, bioactivities, and applicability in food systems. It addresses the critical need for a proper utilization strategy of proteins from various plant sources amidst the rising environmental footprint of animal protein production. The inherent composition diversity among plant proteins, their nutritional profiles, digestibility, environmental impacts, and consumer acceptance are compared. The innovative modification techniques to enhance the functional properties of plant proteins are also discussed. The review also investigates the bioactive properties of plant proteins, including their antioxidant, antimicrobial, and antitumoral activities, and their role in developing meat analogs, dairy alternatives, baked goods, and 3D-printed foods. It underscores the consideration parameters of using plant proteins as sustainable, nutritious, and functional ingredients and advocates for research to overcome sensory and functional challenges for improved consumer acceptance and marketability.

Combinative effect of pulsed-light irradiation and solid-state fermentation on ginkgolic acids, ginkgols, ginkgolides, bilobalide, flavonoids, product quality and sensory assessment of Ginkgo biloba dark tea.

Pulsed light (PL) is a prospective non-thermal technology that can improve the degradation of ginkgolic acid (GA) and retain the main bioactive compounds in Ginkgo biloba leaves (GBL). However, only using PL hasn't yet achieved the ideal effect of reducing GA. Fermentation of GBL to make ginkgo dark tea (GDT) could decrease GA. Because different microbial strains are used for fermentation, their metabolites and product quality might differ. However, there is no research on the combinative effect of PL irradiation fixation and microbial strain fermentation on main bioactive compounds and sensory assessment of GDT. In this research, first, Bacillus subtilis and Saccharomyces cerevisiae were selected as fermentation strains that can reduce GA from the five microbial strains. Next, the fresh GBL was irradiated by PL for 200 s (fluences of 0.52 J/cm2), followed by B. subtilis, S. cerevisiae, or natural fermentation to make GDT. The results showed that compared with the control (unirradiated and unfermented GBL) and the only PL irradiated GBL, the GA in GDT using PL + B. subtilis fermentation was the lowest, decreasing by 29.74%; PL + natural fermentation reduced by 24.53%. The total flavonoid content increased by 14.64% in GDT using PL + B. subtilis fermentation, whose phenolic and antioxidant levels also increased significantly. Sensory evaluation showed that the color, aroma, and taste of the tea infusion of PL + B. subtilis fermentation had the highest scores. In conclusion, the combined PL irradiation and solid-state fermentation using B. subtilis can effectively reduce GA and increase the main bioactive compounds, thus providing a new technological approach for GDT with lower GA.

Toxicity assessment of 3-O-[6-deoxy-3-O-methyl-ß-D-allopyranosyl-(1 → 4)-ß-D-oleandropyranosyl]-17ß-marsdenin isolated from Gongronema latifolium leaf on selected brain and kidney function indices in mice.

The safety of bioactive compounds, especially those isolated from medicinal plants, is a major concern for health authorities, pharmaceutical industries, and the public. Of recent, anti-tumor pregnane glycosides were isolated from Gongronema latifolium leaf, of which the toxicity of one, 3-O-[6-deoxy-3-O-methyl-ß-D-allopyranosyl-(1 â†’ 4)-ß-D-oleandropyranosyl]-17ß-marsdenin (3DMAOM), has not been evaluated. This study, therefore, evaluated the effects of 3DMAOM on selected brain and kidney function indices in mice. Female Swiss albino mice were randomly administered 5% dimethyl sulphoxide and different doses of 3DMAOM (0.5, 1, 2, and 4 mg/kg body weight) for fourteen (14) days, and their blood, brains, and kidneys were collected for biochemical analysis. There was no significant alteration in the activities of alkaline phosphatase (ALP), acetylcholinesterase, creatine kinase, Na+/K+-ATPase, Ca2+/Mg2+-ATPase, and Mg2+-ATPase in the brain of the treated groups compared to control. Also, no significant changes in the activities of ALP, gamma-glutamyltransferase, Na+/K+-ATPase, Ca2+/Mg2+-ATPase, and Mg2+-ATPase in the kidney of the treated groups compared to control. The plasma concentrations of Na+, K+, Cl-, PO43-, creatinine, and urea of mice were not significantly altered at all doses of the 3DMAOM compared to controls. However, the plasma concentration of Ca2+ was significantly reduced (p < 0.05) at all doses of the 3DMAOM, and the plasma concentration of uric acid was significantly reduced (p < 0.05) at 2 mg/kg body weight of the 3DMAOM compared to controls. These findings suggest that 3DMAOM isolated from Gongronema latifolium leaf may not adversely affect brain function but may affect calcium ion homeostasis in subjects.

Thermal fixation technologies affect phenolic profile, ginkgolides, bilobalide, product quality, and ginkgolic acids in Ginkgo biloba leaf tea.

Ginkgo biloba leaves (GBLs) contain high phytoconstituents, but ginkgolic acids (GAs, the main toxic compound in GBLs) have limited its applications. Processing Ginkgo biloba dark tea (GBDT) using fixation technology could decrease the toxic compounds; retain flavonoids, ginkgolides, and bilobalide; and improve the product quality. For the first time, various thermal fixations (hot air fixation [HAF], iron pot fixation [IPF], and boiled water fixation [BWF]) followed by rolling, fermentation, and drying were applied to produce GBDT. A comprehensive analysis of the toxicants (GAs), main bioactive compounds (ginkgolides and bilobalide, flavonoids, antioxidants, and phenolic profiles), and product qualities (moisture content, reducing sugar [RS], free amino acids [FAAs], enzyme activity, color properties, antioxidant capacity, etc.) were evaluated. The results revealed that thermal fixations BWF and HAF significantly reduced the GA contents (41.1%-34.6%). Most terpene lactones showed significant differences in control, IPF, and HAF. The HAF had lower total flavonoid content (TFC) than BWF and IPF. The control group (unfixated) had the highest toxic components (GA), terpene trilactones, and TFC compared with various fixations. Adding different fixations to rolling, fermentation, and drying had various impacts on GBDT, and principal component analysis supported the results. Among four thermal fixations, HAF yielded the best results in RS, FAA, total phenolic content, and antioxidant activities, while IPF had the highest TFC. BWF had the lowest content for GA. In conclusion, HAF (6) was chosen as the best technique for producing GBDT since it preserved GBDT's bioactive components while lowering its toxic components.

We need collaboration and co-creation to address challenges facing coastal communities.

Coastal communities across the globe are faced with multifaceted, interconnected challenges with competing environmental, social and economic needs. In rural coastal communities of the Global South, the challenges presented by climate change are complicated by those related to development, resource management and sustainable livelihoods. The rapid growth of such coastal communities exacerbates these challenges and reinforces the need for effective and sustainable governance. Such governance requires a move from top-down approaches to human-centred approaches. Human-centred coastal governance engages multiple stakeholders and combines multidisciplinary knowledge, participatory approaches, co-creation of solutions and multi-institutional partnerships. Here we present case studies from coastal communities in Vanuatu, Ghana and Bangladesh. These illustrate several of the complex challenges facing such communities and the collaborative and empowering strategies that have been used to meet them. Based on these case studies, we present a transdisciplinary framework to inform the co-creation of coastal management strategies that meet interconnected human and environmental needs.

Separation and purification of polyprenols from Ginkgo biloba leaves by silver ion anchored on imidazole-based ionic liquid functionalized mesoporous MCM-41 sorbent.

Polyprenols (PPs) are compounds with excellent biological activities and are applied in food, pharmaceutical, and cosmetic industries. However, its strong non-polar nature makes it difficult to separate with many saturated impurities (such as saturated fatty acids) extracted together. Complexation extraction is an effective method for separating saturated and polyunsaturated compounds. In this study, mesoporous silica MCM-41 was modified by imidazole-based ionic liquids (IL) followed by coating these MCM-41-supported IL compounds with silver salt to construct π-complexing adsorbent (AgBF4/IL•MCM-41) to enrich PPs from Ginkgo biloba leaves (GBL) extract. The mesoporous π-complexing sorbent was characterized by small-angle X-ray scattering (SAXS), FTIR, and nitrogen adsorption-desorption. The effect of the ratio of silver salt to IL•MCM-41 on the adsorption capacity of polyprenols from GBL was compared, and the dosage of AgBF4 was determined to be 1.5 mmol/g IL•MCM-41. Adsorption isotherms and kinetics indicate that the π-complexing adsorbent has excellent PPs adsorption performance (153 mg/g at 30 °C) and a fast adsorption rate (the time to reach adsorption equilibrium is 210 s). The PPs were separated using the fixed bed after treatment for only one cycle with AgBF4/IL•MCM-41, and the content of PPs in the product was increased from 38.54% to 70.2%, with a recovery rate of 86.6%. The π-complexing adsorbent showed excellent reusability for ≥3 adsorption-desorption cycles.

Development, Validation, and Application of High-Performance Liquid Chromatography with Diode-Array Detection Method for Simultaneous Determination of Ginkgolic Acids and Ginkgols in Ginkgo biloba.

Ginkgo biloba leaves (GBLs), which comprise many phytoconstituents, also contain a toxic substance named ginkgolic acid (GA). Our previous research showed that heating could decarboxylate and degrade GA into ginkgols with high levels of bioactivity. Several methods are available to measure GA in GBLs, but no analytical method has been developed to measure ginkgols and GA simultaneously. Hence, for the first time, an HPLC-DAD method was established to simultaneously determine GA and ginkgols using acetonitrile (0.01% trifluoroacetic acid, v/v) as mobile phase A and water (0.01% trifluoroacetic acid, v/v) as mobile phase B. The gradient elution conditions were: 0-30 min, 75-90% phase A; 30-35 min, 90-90% phase A; 35-36 min, 90-75% phase A; 36-46 min, 75-75% phase A. The detection wavelength of GA and ginkgol were 210 and 270 nm, respectively. The flow rate and injection volume were 1.0 mL/min and 50 µL, respectively. The linearity was excellent (R2 > 0.999), and the RSD of the precision, stability, and repeatability of the total ginkgols was 0.20%, 2.21%, and 2.45%, respectively, in six parallel determinations. The recoveries for the low, medium, and high groups were 96.58%, 97.67%, and 101.52%, respectively. The limit of detection of ginkgol C13:0, C15:1, and C17:1 was 0.61 ppm, 0.50 ppm, and 0.06 ppm, respectively. The limit of quantification of ginkgol C13:0, C15:1, and C17:1 was 2.01 ppm, 1.65 ppm, and 0.20 ppm, respectively. Finally, this method accurately measured the GA and ginkgol content in ginkgo leaves and ginkgo tea products (ginkgo black tea, ginkgo dark tea, ginkgo white tea, and ginkgo green tea), whereas principal component analysis (PCA) was performed to help visualize the association between GA and ginkgols and five different processing methods for GBLs. Thus, this research provides an efficient and accurate quantitative method for the subsequent detection of GA and ginkgols in ginkgo tea.

Synergistic effects of lactobacillus strains and Acetobacter pasteurianus on jujube puree's product functionality and quality.

Commercial lactic acid bacteria strains and indigenous Chinese acetic acid bacterium were co-cultivated bi- and tri-culturally in Junzao jujube puree for the first time to investigate their effects on physicochemical properties and quality attributes. Lactic-acetic acid bacteria co-fermentation was performed at 37 °C for 48 h during the anaerobic fermentation phase and at 30 °C for 144 h during aerobic fermentation. FTIR results showed that predominant wave numbers at 1716-1724 cm-1 and 2922-3307 cm-1 exhibited discernible alterations in the lactic-acetic acid co-fermented jujube purees compared to the control sample. Pearson correlation analysis showed that the flavonoid and flavonol contents were responsible for the enhanced 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) and 2,2-diphenyl-1-picrylhydrazyl scavenging activities of the fermented jujube purees. Consequently, fermented jujube puree from tricultures of Lactobacillus casei, Lactobacillus plantarum, and Acetobacter pasteurianus gave the best results, with the highest phenolics, flavonoid, and flavonol contents and the most improved antioxidative properties and color. Overall, lactic-acetic acid bacteria co-culture holds significant promise in valorizing Junzao jujube purees for functional ingredient development, paving the way for further research into similar interactions with different food matrices or microbial strains.

How does ultrasound-assisted ionic liquid treatment affect protein? A comprehensive review of their potential mechanisms, safety evaluation, and physicochemical and functional properties.

Proteins are essential to human health with enormous food applications. Despite their advantages, plant and animal proteins often exhibit limited molecular flexibility and poor solubility due to hydrogen bonds, hydrophobic interactions, and ionic interactions within their molecular structures. Thus, there is an urgent need to modify the rigid structure of proteins to enhance their stability and functional properties. Ultrasound-assisted ionic liquid (UA-IL) treatment for developing compound modification and producing proteins with excellent functional properties has received interest. However, no review specifically addresses the interactions between UA-ILs and proteins. Hence, this review focused on recent research advancements concerning the effects and potential reaction mechanisms of UA-ILs on the physicochemical properties (including particle size; primary, secondary, and tertiary structure; and surface morphology) as well as the functionality (such as solubility, emulsifying properties, and foaming ability) of proteins. Moreover, the safety evaluation of modified proteins was also discussed from various perspectives, such as acute and chronic toxicity, genotoxicity, cytotoxicity, and environmental and microbial toxicity. This review demonstrated that UA-IL treatment-induced protein structural changes significantly impact the functional characteristics of proteins. This treatment approach efficiently promotes protein structure stretching and spatial rearrangement through cavitation, thermal effects, and ionic interactions. As a result, the functional properties of modified proteins exhibited an obvious enhancement, thereby bringing more opportunities to utilize modified protein products in the food industry. Potential future directions for protein modification using UA-ILs were also proposed.

Assessing the vibration perception threshold in a community sample of adult Ghanaians.

BACKGROUND: The vibration perception threshold (VPT) helps evaluate human somatosensory function and diagnose peripheral neuropathy. To optimize its use as a primary neurologic tool, it is imperative to establish its typical values in healthy subjects and assess the factors affecting its variability in an individual to ensure consistency in its application. METHODS: Demographic data and a brief medical history were collected from 391 non-diabetic adults aged 30-80 at Kpone-on-Sea in Ghana. The VPT was measured at the tip of the big toe, the medial malleolus, the tip of the middle finger, and the head of the ulna of each participant using a Horwell Neurothesiometer. The variability of VPT was assessed vis-à-vis the following factors: gender, age, fasting plasma sugar and body mass index. RESULTS: The mean age of participants was 48.4 ± 0.7 years, and the female-to-male ratio was 1.46. The overall VPT values ranged from 5.74 ± 0.14 volts to 8.55 ± 0.18 volts in the lower limbs and 3.61 ± 0.06 volts to 5.00 ± 0.08 volts in the upper limbs. Age was found to be the only factor that could predict VPT for both the lower and upper limbs (P < 0.001). One-Way Analysis of Variance with Tukey's posthoc showed that the VPT in the feet was significantly higher than that in the hands. CONCLUSIONS: Generally, the VPT was high on proximal sites and low on distal sites indicating that the vibration sensation increased from proximal to distal direction. Therefore, distal areas should be used for VPT testing with a Neurothesiomer. Age was found to be the only factor that affected VPT variability. Hence, the practical application of VPT will require age-specific reference ranges to cater for older adults.

Ginkgols and bilobols in Ginkgo biloba L. A review of their extraction and bioactivities.

Ginkgo biloba (GB) has enormous bioactives with anti-bacterial, anti-oxidant, anti-cancer, and immune-stimulating properties, with global sales exceeding $10 billion. The terpene trilactones (ginkgolides A, B, and C) and flavonoids (mostly quercetin, isorhamnetin, and kaempferol) have received the most significant focus in GB research to date, whereas other bioactive compounds such as ginkgols and bilobols with various bioactivities such as anti-viral, anti-oxidant, and anti-tumor actions have received less attention. Therefore, for the first time, this review focused on GB ginkgols, bilobols extraction, and bioactivities. This review showed that petroleum ether and acetone extraction had successfully extracted ginkgols and bilobols. Furthermore, bioactivities such as anti-tumor activity and so on have been demonstrated for ginkgols, and bilobols, providing theoretical justification for ginkgols and bilobol as raw material for nutraceuticals, functional foods, pharmaceuticals, and cosmeceuticals. Future research could look into other biological applications (such as anti-oxidant, antitoxins, anti-radiation, anti-microbial, and antiparasite) and their applications in the pharmaceutical, cosmetic, and nutraceutical industries. Besides, the primary research should be on developing green and effective methods for preparing ginkgols and bilobols and fully utilizing their pharmacological activity. This will also provide a new avenue for efficiently utilizing these bioactive compounds.

Sonoprocessing improves phenolics profile, antioxidant capacity, structure, and product qualities of purple corn pericarp extract.

For the first time, purple corn pericarp (PCP) was converted to polyphenol-rich extract using two-pot ultrasound extraction technique. According to Plackett-Burman design (PBD), the significant extraction factors were ethanol concentration, extraction time, temperature, and ultrasonic amplitude that affected total anthocyanins (TAC), total phenolic content (TPC), and condensed tannins (CT). These parameters were further optimized using the Box-Behnken design (BBD) method for response surface methodology (RSM). The RSM showed a linear curvature for TAC and a quadratic curvature for TPC and CT with a lack of fit > 0.05. Under the optimum conditions (ethanol (50%, v/v), time (21 min), temperature (28 °C), and ultrasonic amplitude (50%)), a maximum TAC, TPC, and CT of 34.99 g cyanidin/kg, 121.26 g GAE/kg, and 260.59 of EE/kg, respectively were obtained with a desirability value 0.952. Comparing UAE to microwave extraction (MAE), it was found that although UAE had a lower extraction yield, TAC, TPC, and CT, the UAE gave a higher individual anthocyanin, flavonoid, phenolic acid profile, and antioxidant activity. The UAE took 21 min, whereas MAE took 30 min for maximum extraction. Regarding product qualities, UAE extract was superior, with a lower total color change (ΔE) and a higher chromaticity. Structural characterization using SEM showed that MAE extract had severe creases and ruptures, whereas UAE extract had less noticeable alterations and was attested by an optical profilometer. This shows that ultrasound, might be used to extract phenolics from PCP as it requires lesser time and improves phenolics, structure, and product qualities.

A review of solar and solar-assisted drying of fresh produce: state of the art, drying kinetics, and product qualities.

Global demand exists for high-quality fresh produce. Nevertheless, the quality of fresh produce is severely impacted by its perishability due to its high moisture content. Therefore, fresh produces are preserved using artificial dryers (hot-air dryers, catalytic infrared dryers, etc.) driven by electricity or natural fuels. Nonetheless, the exorbitant cost of power has heightened the need for sustainable resources, notably solar energy, for drying. Hence, this article is a review of how solar dryers and solar-assisted dryers have affected the drying kinetics and quality of fresh produce in the last 5 years. The review showed that solar drying modeling technology (thin-layer modeling, computational fluid dynamics, adaptive-network-based fuzzy interference system, artificial neural network) helps examine fresh produce drying characteristics using various simulation tools before developing any procedure. Solar-assisted drying shortens drying times and increases drying rates. Besides, the quality of the dried fresh produce (color, aroma, appearance, rehydration, etc.) should always be considered. Hybrid solar drying produces higher drying rates and product quality than other solar dryers. However, energy analysis needs to be done as several studies have recognized energy efficiency and product quality. In addition, fresh produce must be pre-treated before solar drying to maintain the final product quality. Therefore, future studies should focus on creating other pretreatment techniques to produce the needed chemical and physical changes and enhance mass and heat transfer. Finally, the influence of solar drying on the final products' nutrient retention or loss, functionalities, or sensory characteristics needs further investigation and comparison to other non-solar drying technologies. © 2023 Society of Chemical Industry.

Use of Computed Tomography Angiography to Predict Complications in Tibia Fractures: A Multicenter Retrospective Analysis.

OBJECTIVES: To assess the ability of computed tomography angiography identified infrapopliteal vascular injury to predict complications in tibia fractures that do not require vascular surgical intervention. DESIGN: Multicenter retrospective review. SETTING: Six Level I trauma centers. PATIENTS AND INTERVENTION: Two hundred seventy-four patients with tibia fractures (OTA/AO 42 or 43) who underwent computed tomography angiography maintained a clinically perfused foot not requiring vascular surgical intervention and were treated with an intramedullary nail. Patients were grouped by the number of vessels below the trifurcation that were injured. MAIN OUTCOME MEASUREMENTS: Rates of superficial and deep infection, amputation, unplanned reoperation to promote bone healing (nonunion), and any unplanned reoperation. RESULTS: There were 142 fractures in the control (no-injury) group, 87 in the one-vessel injury group, and 45 in the two-vessel injury group. Average follow-up was 2 years. Significantly higher rates of nerve injury and flap coverage after wound breakdown were observed in the two-vessel injury group. The two-vessel injury group had higher rates of deep infection (35.6% vs. 16.9%, P = 0.030) and unplanned reoperation to promote bone healing (44.4% vs. 23.9%, P = 0.019) compared with controls, as well as increased rates of any unplanned reoperation compared with control and one-vessel injury groups (71.1% vs. 39.4% and 51.7%, P < 0.001), respectively. There were no significant differences in rates of superficial infection or amputation. CONCLUSIONS: Tibia fractures with two-vessel injuries were associated with higher rates of deep infection and unplanned reoperation to promote bone healing compared with those without vascular injury, as well as increased rates of any unplanned reoperation compared with controls and fractures with one-vessel injury. LEVEL OF EVIDENCE: Prognostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Polyprenols in Ginkgo biloba; a review of their chemistry (synthesis of polyprenols and their derivatives), extraction, purification, and bioactivities.

The Ginkgo biloba L. (GB) contains high bioactive compounds. To date, flavonoids and terpene trilactone have received the majority of attention in GB studies, and the GB has been utilized globally in functional food and pharmacological firms, with sales > $10 billion since 2017, while the other active components, for instance, polyprenols (a natural lipid) with various bioactivities have received less attention. Hence, this review focused on polyprenols' chemistry (synthesis of polyprenols and their derivatives) extraction, purification, and bioactivities from GB for the first time. The various extractions and purification methods (nano silica-based adsorbent, bulk ionic liquid membrane, etc.) were delved into, and their advantages and limitations were discussed. Besides, numerous bioactivities of the extracted Ginkgo biloba polyprenols (GBP) were reviewed. The review showed that GB contains some polyprenols in acetic esters' form. Prenylacetic esters are free of adverse effects. Besides, the polyprenols from GB have numerous bioactivities such as anti-bacterial, anti-cancer, anti-viral activity, etc. The application of GBPs in the food, cosmetics, and drugs industries such as micelles, liposomes, and nano-emulsions was delved into. Finally, the toxicity of polyprenol was reviewed, and it was concluded that GBP was not carcinogenic, teratogenic, or mutagenic, giving a theoretical justification for using GBP as a raw material for functional foods. This article will aid researchers to better understand the need to explore GBP usage.

Effects of processing methods on quality, antioxidant capacity, and cytotoxicity of Ginkgo biloba leaf tea product.

BACKGROUND: Ginkgo biloba leaves contain beneficial flavonoids, bilobalide (BB), and ginkgolides. However, the toxic ginkgolic acid (GA) limit its application. In this study, various traditional processing methods were used to prepare G. biloba leaf tea (GBLT), including white tea, black tea, dark tea, green tea, and freeze-dried as control, followed by investigations of their effects on quality, antioxidant capacity, bioactive components, and cytotoxicity of the tea products. RESULTS: Results showed that different processing methods significantly impact the tea products' quality indexes and the principal component analysis (PCA) and hierarchical cluster analysis (HCA) corroborated it. White tea had the highest total sugar (TS) and GA content and the most potent cytotoxicity on HepG2 cells. However, TS and GA content and the cytotoxicity of GBLT markedly decreased during fermentation and fixation. Moreover, white tea possessed higher total phenolic content (TPC), total flavonoid content (TFC), and more vigorous antioxidant activities than green tea, black tea, and dark tea. Terpene trilactones value was stable, but different catechins contents fluctuated according to the manufacturing process of different GBLTs. Among the four GBLTs, dark tea combining fixation and fermentation had the lowest GA content and cytotoxicity, less bioactive components reduction, appropriate quality, and stronger flavor. CONCLUSION: These findings demonstrate that fixation and fermentation help reduce GAs during the manufacturing of GBLT. However, their ability to retain bioactive substances needs further optimization in future studies. © 2023 Society of Chemical Industry.

Updating the status quo on the extraction of bioactive compounds in agro-products using a two-pot multivariate design. A comprehensive review.

Extraction is regarded as the most crucial stage in analyzing bioactive compounds. Nonetheless, due to the intricacy of the matrix, numerous aspects must be optimized during the extraction of bioactive components. Although one variable at a time (OVAT) is mainly used, this is time-consuming and laborious. As a result, using an experimental design in the optimization process is beneficial with few experiments and low costs. This article critically reviewed two-pot multivariate techniques employed in extracting bioactive compounds in food in the last decade. First, a comparison of the parametric screening methods (factorial design, Taguchi, and Plackett-Burman design) was delved into, and its advantages and limitations in helping to select the critical extraction parameters were discussed. This was followed by a discussion of the response surface methodologies (central composite (CCD), Doehlert (DD), orthogonal array (OAD), mixture, D-optimal, and Box-Behnken designs (BBD), etc.), which are used to optimize the most critical variables in the extraction of bioactive compounds in food, providing a sequential comprehension of the linear and complex interactions and multiple responses and robustness tests. Next, the benefits, drawbacks, and possibilities of various response surface methodologies (RSM) and some of their usages were discussed, with food chemistry, analysis, and processing from the literature. Finally, extraction of food bioactive compounds using RSM was compared to artificial neural network modeling with their drawbacks discussed. We recommended that future experiments could compare these designs (BBD vs. CCD vs. DD, etc.) in the extraction of food-bioactive compounds. Besides, more research should be done comparing response surface methodologies and artificial neural networks regarding their practicality and limitations in extracting food-bioactive compounds.

Evaluating the status quo of deep eutectic solvent in food chemistry. Potentials and limitations.

Conventional organic solvents (e.g., methanol, ethanol, ethyl acetate) are widely used for extraction, reaction, and separation of valuable compounds. Although these solvents are effective, they have disadvantages, including flammability, toxicity, and persistence in the environment. Deep eutectic solvents (DESs) are valued for their biodegradability/low impact on the environment, low cost, and ease of manufacture. The objective of this review was to provide an overview of applications of DES in food chemistry, specifically in regard of extraction of polyphenols (e.g., anthocyanin, rutin, kaempferol, quercetin, resveratrol), protein, carbohydrates (e.g., chitin, pectins), lipids and lipid-soluble compounds (e.g., free fatty acids, astaxanthin, ß-carotene, terpenoids), biosensor development, and use in food safety (pyrethroids, Sudan I, bisphenol A, Pb2+, Cd2+, etc.) over the past five years. A comprehensive analysis and discussion of DES types, preparation, structures, and influencing factors is provided. Furthermore, the potential and disadvantages of using DESs to extract biomolecules were assessed. We concluded that DES is a viable alternative for extracting polyphenols, carbohydrates, and lipids as well as use in food safety monitoring and biosensor development. However, more work is needed to address shortcomings, and determine whether using compounds extracted with DES can be consumed safely.

Recent advances incombined Avant-garde technologies (thermal-thermal, non-thermal-non-thermal, and thermal-non-thermal matrix) to extract polyphenols from agro byproducts.

Because food byproducts (waste) are rich in phytoconstituents, valorizing them is crucial for global food security. However, conventional extraction (CE), including decoction, maceration, Soxhlet, etc., for agro byproducts' polyphenol extraction are time-consuming and rely significantly on vast volumes of potentially aggressive solvents. Hence, Avantgarde extraction technologies, including non-thermal (high hydrostatic pressure (HHPE), pulsed-electric field (PEF), high voltage electrical discharges (HVED), etc.) and thermal extraction (supercritical fluid (SCF), subcritical water extraction (SWE), microwave-assisted extraction (MAE), etc.), as well as their thermal combinations (SCF-PLE, SCCO2-SWE, SCCO2-MAE, etc.), non-thermal combinations (HHPE + UAE, PEF + UAE, HVED + UAE, etc.) and combined thermalnon-thermal (MAE-UAE, etc.) are increasingly replacing CE. However, a review of combined Avant-garde extraction escalation technologies (non-thermal/thermal extraction matrix) for extracting polyphenols from agro-byproducts is limited. Hence, this manuscript reviewed Avant-garde extraction technologies (non-thermal/thermal extraction matrix) for extracting phenolics from agro-byproducts in the last 5 years. The key factors affecting polyphenols' extraction from the byproduct, the recent applications of Avant-garde technologies, and their principle were reviewed using databases from Web of Science and Lens.org. The results demonstrated that combined Avant-garde extraction escalation technologies increase extractability, resulting in polyphenols with higher extraction rates, fewer contaminants, and preservation of thermosensitive components. Therefore, combined Avant-garde extraction technologies should be explored over the next five years. Implementing an integrated process and the strategic sequencing of diverse Avant-garde extraction technologies are important. Thus, further investigation is required to explore the sequencing process and its potential impact on the extraction of phenolics from agro-byproducts.

Extraction, Purification, and Elucidation of Six Ginkgol Homologs from Ginkgo biloba Sarcotesta and Evaluation of Their Anticancer Activities.

Ginkgols are active constituents from Ginkgo biloba L. (GB) and have pharmacological activities, such as antibacterial and antioxidant activities. In our previous report, only five ginkgols were separated. However, ginkgol C17:1 had two isomers, for which their separation, identification, and bioactivities have not yet been investigated. Hence, this research reports the successful isolation of six ginkgol homologs with alkyl substituents-C17:1-Δ12, C15:1-Δ8, C13:0, C17:2, C17:1-Δ10, and C15:0-for the first time using HPLC. This was followed by the identification of their chemical structures using Fourier transform infrared (FTIR), ultraviolet (UV), gas chromatography and mass spectrometry (GC-MS), carbon-13 nuclear magnetic resonance (13C-NMR), and proton nuclear magnetic resonance (1H-NMR) analysis. The results showed that two ginkgol isomers, C17:1-Δ12 and C17:1-Δ10, were obtained simultaneously from the ginkgol C17:1 mixture and identified entirely for the first time. That aside, the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide (MTT) assay showed that the six ginkgol homologs possessed significant antiproliferation effects against HGC and HepG2 cells. Furthermore, the ginkgols with unsaturated side chains (C17:2, C15:1-Δ8, C17:1-Δ12, and C17:1-Δ10) exhibited more potent inhibitory effects than ginkgols with saturated side chains (C13:0, C15:0). In addition, unsaturated ginkgol C15:1-Δ8 showed the most potent cytotoxicity on HepG2 and HGC cells, of which the half-maximal inhibition concentrations (IC50) were 18.84 ± 2.58 and 13.15 ± 2.91 µM, respectively. The IC50 for HepG2 and HGC cells for the three unsaturated ginkgols (C17:1-Δ10, C17:2 and C17:1-Δ12) were ~59.97, ~60.82, and ~68.97 µM for HepG2 and ~30.97, ~33.81, and ~34.55 µM for HGC cells, respectively. Comparing the ginkgols' structure-activity relations, the findings revealed that the position and number of the double bonds of the ginkgols with 17 side chain carbons in length had no significant difference in anticancer activity.