Household fermentation of leftover bread to nutritious food.

Resource dependency of food production is aggravated when food is wasted. In Sweden, it is estimated that 37% of the total bread waste is generated at the household level. This work aimed to assess whether fermentation using edible filamentous fungi at households can provide a solution to valorize leftover bread in the production of fungi-based food for consumption. Bread was fermented in household and laboratory conditions with Neurospora intermedia and Rhizopus oligosporus. The results show that bread can be successfully and easily fermented at households, without signs of microbial contamination even though the conditions were not sterile. Fermentation at the household resulted in higher protein, fat and fiber content as well as greater starch reduction compared to the samples fermented under laboratory conditions. Household engagement in bread fermentation will likely depend on values that motivate reusing leftover bread. Perceived values that are expected to motivate engagement vary across individuals, but may include improved nutritional benefits, food waste prevention, convenience, responsibilities, and being part of sustainable societies and actions.

Challenges for Upcycled Foods: Definition, Inclusion in the Food Waste Management Hierarchy and Public Acceptability.

Upcycled foods contain unmarketable ingredients (e.g., damaged food produce, by-products and scraps from food preparation) that otherwise would not be directed for human consumption. Upcycled food is a new food category and thus faces several challenges, such as definition development, inclusion in the food waste management hierarchy and public acceptability. This review provides an overview of these three challenges. The upcycled food definitions have been developed for research, food manufacturers, and multi-stakeholders use. Thus, there is a need for a consumer-friendly definition for the general public. A simplified definition is proposed to introduce these foods as environmentally friendly foods containing safe ingredients that otherwise would not have gone to human consumption such as damaged food produce, by-products and scraps from food preparation. Moreover, an updated version of the food waste management hierarchy has been proposed by including the production of upcycled foods as a separate waste management action that is less preferable than redistribution but more favourable than producing animal feed. Furthermore, consumer sociodemographic characteristics and beliefs, as well as food quality cues and attributes, were identified as crucial factors for the public acceptability of these foods. Future research should address these challenges to facilitate the introduction of upcycled foods.

Effects of improved information and volunteer support on segregation of solid waste at the household level in urban settings in Madhya Pradesh, India (I-MISS): protocol of a cluster randomized controlled trial.

BACKGROUND: Segregation of household waste at the source is an effective and sustainable strategy for management of municipal waste. However, household segregation levels remain insufficient as waste management approaches are mostly top down and lack local support. The realisation and recognition of effective, improved and adequate waste management may be one of the vital drivers for attaining environmental protection and improved health and well-being. The presence of a local level motivator may promote household waste segregation and ultimately pro-environmental behaviour. The present cluster randomized control trial aims to understand if volunteer based information on waste segregation (I-MISS) can effectively promote increased waste segregation practices at the household level when compared with existing routine waste segregation information in an urban Indian setting. METHODS: This paper describes the protocol of an 18 month two-group parallel,cluster randomised controlled trialin the urban setting of Ujjain, Madhya Pradesh, India. Randomization will be conducted at ward level, which is the last administrative unit of the municipality. The study will recruit 425 households in intervention and control groups. Assessments will be performed at baseline (0 months), midline (6 months), end line (12 months) and post intervention (18 months). The primary outcome will be the comparison of change in proportion of households practicing waste segregation and change in proportion of mis-sorted waste across the study period between the intervention and control groups as assessed by pick analysis. Intention to treat analysis will be conducted. Written informed consent will be obtained from all participants. DISCUSSION: The present study is designed to study whether an external motivator, a volunteer selected from the participating community and empowered with adequate training, could disseminate waste segregation information to their community, thus promoting household waste segregation and ultimately pro-environmental behaviour. The study envisages that the volunteers could link waste management service providers and the community, give a local perspective to waste management, and help to change community habits through information, constant communication and feedback. TRIAL REGISTRATION: The study is registered prospectively with Indian Council of Medical Research- Clinical Trial Registry of India ( CTRI/2020/03/024278 ).

Examining the Impacts of CO2 Concentration and Genetic Compatibility on Perennial Ryegrass-Epichloë festucae var lolii Interactions.

Perennial ryegrass (Lolium perenne) is the most cultivated cool-season grass worldwide with crucial roles in carbon fixation, turfgrass applications, and fodder for livestock. Lolium perenne forms a mutualism with the strictly vertically transmitted fungal endophyte, Epichloë festucae var lolii. The fungus produces alkaloids that protect the grass from herbivory, as well as conferring protection from drought and nutrient stress. The rising concentration of atmospheric CO2, a proximate cause of climatic change, is known to have many direct and indirect effects on plant growth. There is keen interest in how the nature of this plant-fungal interaction will change with climate change. Lolium perenne is an obligately outcrossing species, meaning that the genetic profile of the host is constantly being reshuffled. Meanwhile, the fungus is asexual implying both a relatively constant genetic profile and the potential for incompatible grass-fungus pairings. In this study, we used a single cultivar, "Alto", of L. perenne. Each plant was infected with one of four strains of the endophyte: AR1, AR37, NEA2, and Lp19 (the "common strain"). We outcrossed the Alto mothers with pollen from a number of individuals from different ryegrass cultivars to create more genetic diversity in the hosts. We collected seed such that we had replicate maternal half-sib families. Seed from each family was randomly allocated into the two levels of the CO2 treatment, 400 and 800 ppm. Elevated CO2 resulted in an c. 18% increase in plant biomass. AR37 produced higher fungal concentrations than other strains; NEA2 produced the lowest fungal concentrations. We did not find evidence of genetic incompatibility between the host plants and the fungal strains. We conducted untargeted metabolomics and quantitative proteomics to investigate the grass-fungus interactions between and within family and treatment groups. We identified a number of changes in both the proteome and metabalome. Taken together, our data set provides new understanding into the intricacy of the interaction between endophyte and host from multiple molecular levels and suggests opportunity to promote plant robustness and survivability in rising CO2 environmental conditions through application of bioprotective epichloid strains.

Environmental impacts of waste management and valorisation pathways for surplus bread in Sweden.

Bread waste represents a significant part of food waste in Sweden. At the same time, the return system established between bakeries and retailers enables a flow of bread waste that is not contaminated with other food waste products. This provides an opportunity for alternative valorisation and waste management options, in addition to the most common municipal waste treatment, namely anaerobic digestion and incineration. An attributional life cycle assessment of the management of 1 kg of surplus bread was conducted to assess the relative environmental impacts of alternative and existing waste management options. Eighteen impact categories were assessed using the ReCiPe methodology. The different management options that were investigated for the surplus bread are donation, use as animal feed, beer production, ethanol production, anaerobic digestion, and incineration. These results are also compared to reducing the production of bread by the amount of surplus bread (reduction at the source). The results support a waste hierarchy where reduction at the source has the highest environmental savings, followed by use of surplus bread as animal feed, donation, for beer production and for ethanol production. Anaerobic digestion and incineration offer the lowest environmental savings, particularly in a low-impact energy system. The results suggests that Sweden can make use of the established return system to implement environmentally preferred options for the management of surplus bread.

DFT studies of hydrocarbon combustion on metal surfaces.

Catalytic combustion of hydrocarbons is an important technology to produce energy. Compared to conventional flame combustion, the catalyst enables this process to operate at lower temperatures; hence, reducing the energy required for efficient combustion. The reaction and activation energies of direct combustion of hydrocarbons (CH → C + H) on a series of metal surfaces were investigated using density functional theory (DFT). The data obtained for the Ag, Au, Al, Cu, Rh, Pt, and Pd surfaces were used to investigate the validity of the Brønsted-Evans-Polanyi (BEP) and transition state scaling (TSS) relations for this reaction on these surfaces. These relations were found to be valid (R2 = 0.94 for the BEP correlation and R2 = 1.0 for the TSS correlation) and were therefore used to estimate the energetics of the combustion reaction on Ni, Co, and Fe surfaces. It was found that the estimated transition state and activation energies (ETS = -69.70 eV and Ea = 1.20 eV for Ni, ETS = -87.93 eV and Ea = 1.08 eV for Co and ETS = -92.45 eV and Ea = 0.83 eV for Fe) are in agreement with those obtained by DFT calculations (ETS = -69.98 eV and Ea = 1.23 eV for Ni, ETS = -87.88 eV and Ea = 1.08 eV for Co and ETS = -92.57 eV and Ea = 0.79 eV for Fe). Therefore, these relations can be used to predict energetics of this reaction on these surfaces without doing the time consuming transition state calculations. Also, the calculations show that the activation barrier for CH dissociation decreases in the order Ag ˃ Au ˃ Al ˃ Cu ˃ Pt ˃ Pd ˃ Ni > Co > Rh > Fe.

Changes in carbon footprint when integrating production of filamentous fungi in 1st generation ethanol plants.

Integrating the cultivation of edible filamentous fungi in the thin stillage from ethanol production is presently being considered. This integration can increase the ethanol yield while simultaneously producing a new value-added protein-rich biomass that can be used for animal feed. This study uses life cycle assessment to determine the change in greenhouse gas (GHG) emissions when integrating the cultivation of filamentous fungi in ethanol production. The result shows that the integration performs better than the current scenario when the fungal biomass is used as cattle feed for system expansion and when energy allocation is used. It performs worse if the biomass is used as fish feed. Hence, integrating the cultivation of filamentous fungi in 1st generation ethanol plants combined with proper use of the fungi can lead to a reduction of GHG emissions which, considering the number of existing ethanol plants, can have a significant global impact.

Support for designing waste sorting systems: A mini review.

This article presents a mini review of research aimed at understanding material recovery from municipal solid waste. It focuses on two areas, waste sorting behaviour and collection systems, so that research on the link between these areas could be identified and evaluated. The main results presented and the methods used in the articles are categorised and appraised. The mini review reveals that most of the work that offered design guidelines for waste management systems was based on optimising technical aspects only. In contrast, most of the work that focused on user involvement did not consider developing the technical aspects of the system, but was limited to studies of user behaviour. The only clear consensus among the articles that link user involvement with the technical system is that convenient waste collection infrastructure is crucial for supporting source separation. This mini review reveals that even though the connection between sorting behaviour and technical infrastructure has been explored and described in some articles, there is still a gap when using this knowledge to design waste sorting systems. Future research in this field would benefit from being multidisciplinary and from using complementary methods, so that holistic solutions for material recirculation can be identified. It would be beneficial to actively involve users when developing sorting infrastructures, to be sure to provide a waste management system that will be properly used by them.

Quantitative assessment of distance to collection point and improved sorting information on source separation of household waste.

The present study measures the participation of households in a source separation scheme and, in particular, if the household's application of the scheme improved after two interventions: (a) shorter distance to the drop-off point and (b) easy access to correct sorting information. The effect of these interventions was quantified and, as far as possible, isolated from other factors that can influence the recycling behaviour. The study was based on households located in an urban residential area in Sweden, where waste composition studies were performed before and after the interventions by manual sorting (pick analysis). Statistical analyses of the results indicated a significant decrease (28%) of packaging and newsprint in the residual waste after establishing a property close collection system (intervention (a)), as well as significant decrease (70%) of the miss-sorted fraction in bags intended for food waste after new information stickers were introduced (intervention (b)). Providing a property close collection system to collect more waste fractions as well as finding new communication channels for information about sorting can be used as tools to increase the source separation ratio. This contribution also highlights the need to evaluate the effects of different types of information and communication concerning sorting instructions in a property close collection system.

A density functional theory study of hydrocarbon combustion and synthesis on Ni surfaces.

Combustion and synthesis of hydrocarbons may occur directly (CH → C + H and CO → C + O) or via a formyl (CHO) intermediate. Density functional theory (DFT) calculations were performed to calculate the activation and reaction energies of these reactions on Ni(111), Ni(110), and Ni(100) surfaces. The results show that the energies are sensitive to the surface structure. The dissociation barrier for methylidyne (CH → C + H: catalytic hydrocarbon combustion) is lower than that for its oxidation reaction (CH + O → CHO) on the Ni(110) and Ni(100) surfaces. However the oxidation barrier is lower than that for dissociation on the Ni(111) surface. The dissociation barrier for methylidyne dissociation decreases in the order Ni(111) > Ni(100) > Ni(110). The barrier of formyl dissociation to CO and H is almost the same on the Ni(111) and Ni(110) surfaces and is lower compared to the Ni(100) surface. The energy barrier for carbon monoxide dissociation (CO → C + O: catalytic hydrocarbon synthesis) is higher than that of for its hydrogenation reaction (CO + H → CHO) on all three surfaces. This means that the hydrogenation to CHO is favored on these nickel surfaces. The energy barrier for both reactions decreases in the order Ni(111) > Ni(100) > Ni(110). The barrier for formyl dissociation to CH + O decreases in the order Ni(100) > Ni(111) > Ni(110). Based on these DFT calculations, the Ni(110) surface shows a better catalytic activity for hydrocarbon combustion compared to the other surfaces, and Ni is a better catalyst for the combustion reaction than for hydrocarbon synthesis, where the reaction rate constants are small. The reactions studied here support the BEP principles with R(2) values equal to 0.85 for C-H bond breaking/forming and 0.72 for C-O bond breaking /forming reactions.

Computational studies of water and carbon dioxide interactions with cellobiose.

B3LYP/6-311++G** with dispersion correction (DFT-D) was used to study local and global minimum energy structures of water (H2O) or carbon dioxide (CO2) bonding with a pair of cellobiose molecules. The calculations showed that neither the H2O nor the CO2 prefer to be between the cellobiose molecules, and that the minimum energy structures occur when these molecules bond to the outer surface of the cellobiose pair. The calculations also showed that the low energy structures have a larger number of inter-cellobiose hydrogen bonds than the high energy structures. These results indicate that penetration of H2O or CO2 between adjacent cellobiose pairs, which would assist steam or supercritical CO2 (SC-CO2) explosion of cellulose, is not energetically favored. Comparison of the energies obtained with DFT-D and DFT (the same method but without dispersion correction) show that both hydrogen bonds and van der Waals interactions play an important role in cellobiose-cellobiose interactions.

Molecular level computational studies of polyethylene and polyacrylonitrile composites containing single walled carbon nanotubes: effect of carboxylic acid functionalization on nanotube-polymer interfacial properties.

Molecular dynamics (MD) and molecular mechanics (MM) methods have been used to investigate additive-polymer interfacial properties in single walled carbon nanotube (SWNT)-polyethylene and SWNT-polyacrylonitrile composites. Properties such as the interfacial shear stress and bonding energy are similar for the two composites. In contrast, functionalizing the SWNT with carboxylic acid groups leads to an increase in these properties, with a larger increase for the polar polyacrylonitrile composite. Increasing the percentage of carbon atoms that were functionalized from 1 to 5% also leads to an increase in the interfacial properties. In addition, the interfacial properties depend on the location of the functional groups on the SWNT wall.

Conformational studies of poly(vinylidene fluoride), poly(trifluoroethylene) and poly(vinylidene fluoride-co-trifluoroethylene) using density functional theory.

Different conformations of systems consisting of poly(vinylidene fluoride) (PVDF), poly(trifluoroethylene) (PTrFE) and poly(vinylidene fluoride-co-trifluoroethylene) (P(VDF-TrFE)) were investigated using density functional theory with dispersion correction. It was found that the trans-gauche-trans-gauche' (TGTG') conformation of a single PVDF chain is the lowest energy conformer. Crystals of PVDF were modelled using between two to five chains with up to 12 repeat units in each chain and, in agreement with experiment, structures comprised partly or completely of chains with the TGTG' conformation are more stable than structures built up from chains with all-trans (TTTT) conformation. This indicates that an all-trans segment or chain will not induce the growth of a larger crystal with the same chain conformations. In contrast, the energetically preferred structure of PTrFE chains is an all-trans (TTTT) conformation, and the results indicate that copolymerization of vinylidene fluoride with trifluoroethylene can facilitate the formation of the all-trans PVDF conformations. This is probably due to increased intramolecular repulsion between the fluorine atoms and an increased intermolecular attraction in the crystal structure.

The effect of carbon monoxide Co-adsorption on Ni-catalysed water dissociation.

The effect of carbon monoxide (CO) co-adsorption on the dissociation of water on the Ni(111) surface has been studied using density functional theory. The structures of the adsorbed water molecule and of the transition state are changed by the presence of the CO molecule. The water O-H bond that is closest to the CO is lengthened compared to the structure in the absence of the CO, and the breaking O-H bond in the transition state structure has a larger imaginary frequency in the presence of CO. In addition, the distances between the Ni surface and H2O reactant and OH and H products decrease in the presence of the CO. The changes in structures and vibrational frequencies lead to a reaction energy that is 0.17 eV less exothermic in the presence of the CO, and an activation barrier that is 0.12 eV larger in the presence of the CO. At 463 K the water dissociation rate constant is an order of magnitude smaller in the presence of the CO. This reveals that far fewer water molecules will dissociate in the presence of CO under reaction conditions that are typical for the water-gas-shift reaction.

First principles studies of the effect of ostwald ripening on carbon nanotube chirality distributions.

The effect of Ostwald ripening of metal particles attached to carbon nanotubes has been studied using density functional theory. It has been confirmed that Ostwald ripening may be responsible for the termination of growth of carbon nanotube forests. It was seen that the Ostwald ripening of metal particles attached to carbon nanotubes is governed by a critical factor that depends on both the cluster size and the carbon nanotube chirality. For example, clusters attached to armchair and zigzag nanotubes of similar diameters will have different critical factors although the exact behavior may depend on which molecules are present in the surrounding medium. The critical factor was also observed to have a critical point with the effect that clusters with a narrow size distribution close to the critical point may experience a narrowing rather than a widening of the size distribution, as is the case for free clusters.

Diameter and chirality changes of single-walled carbon nanotubes during growth: an ab-initio study.

We use density functional theory to investigate possible changes of the diameter and chirality of single-walled carbon nanotubes (SWNTs) during catalyzed growth on a nickel cluster. The interplay of nanotube curvature, defects, and carbon-metal interaction dictates if a change is energetically favorable. We found that, given a sufficiently large Ni cluster, both zigzag and armchair nanotubes tend to increase their diameters during growth. This increase leads to a larger increase in energetic stability for smaller diameter nanotubes. Chirality changes are also demonstrated. Our findings impact on the possibility of using the recently proposed nanotube-seeded continued growth of SWNTs to control their chirality.

Computational studies of metal-carbon nanotube interfaces for regrowth and electronic transport.

First principles and tight binding Monte Carlo simulations show that junctions between single-walled carbon nanotubes (SWNTs) and nickel clusters are on the cluster surface, and not at subsurface sites, irrespective of the nanotube chirality, temperature, and whether the docking is gentle or forced. Gentle docking helps to preserve the pristine structure of the SWNT at the metal interface, whereas forced docking may partially dissolve the SWNT in the cluster. This is important for SWNT-based electronics and SWNT-seeded regrowth.

Changes in single-walled carbon nanotube chirality during growth and regrowth.

A simple model for joining two single-walled carbon nanotubes (SWNTs) with different, arbitrary chiralities is used to systematically label junction structures which contain pentagon-heptagon pairs. The model is also used, together with density functional theory, to study the energetics of diameter and chirality changes of thin SWNTs during catalyzed growth or regrowth. We choose zigzag and armchair SWNTs attached to a Ni(55) cluster for our case studies.

The importance of strong carbon-metal adhesion for catalytic nucleation of single-walled carbon nanotubes.

Density functional theory is used to show that the adhesion between single-walled carbon nanotubes (SWNTs) and the catalyst particles from which they grow needs to be strong to support nanotube growth. It is found that Fe, Co, and Ni, commonly used to catalyze SWNT growth, have larger adhesion strengths to SWNTs than Cu, Pd, and Au and are therefore likely to be more efficient for supporting growth. The calculations also show that to maintain an open end of the SWNT it is necessary that the SWNT adhesion strength to the metal particle is comparable to the cap formation energy of the SWNT end. This implies that the difference between continued and discontinued SWNT growth to a large extent depends on the carbon-metal binding strength, which we demonstrate by molecular dynamics (MD) simulations. The results highlight that first principles computations are vital for the understanding of the binding strength's role in the SWNT growth mechanism and are needed to get accurate force field parameters for MD.

Computational studies of small carbon and iron-carbon systems relevant to carbon nanotube growth.

Density functional theory (DFT) calculations show that dimers and longer carbon strings are more stable than individual atoms on Fe(111) surfaces. It is therefore necessary to consider the formation of these species on the metal surfaces and their effect on the mechanism of single-walled nanotube (SWNT) growth. The good agreement between the trends (energies and structures) obtained using DFT and those based on the Brenner and AIREBO models indicate that these analytic models provide adequate descriptions of the supported carbon systems needed for valid molecular dynamics simulations of SWNT growth. In contrast, the AIREBO model provides a better description of the relative energies for isolated carbon species, and this model is preferred over the Brenner potential when simulating SWNT growth in the absence of metal particles. However, the PM3 semiempirical model appears to provide an even better description for these systems and, given sufficient computer resources, direct dynamics methods based on this model may be preferred.