Customizable, biocompatible implants for dorsal nasal augmentation: An in vivo pilot study of eight polylactic acid scaffold designs.

Augmentation of the nasal dorsum often requires implantation of structural material. Existing methods include autologous, cadaveric or alloplastic materials and injectable hydrogels. Each of these options is associated with considerable limitations. There is an ongoing need for precise and versatile implants that produce long-lasting craniofacial augmentation. Four separate polylactic acid (PLA) dorsal nasal implant designs were 3D-printed. Two implants had internal PLA rebar of differing porosities and two were designed as "shells" of differing porosities. Shell designs were implanted without infill or with either minced or zested processed decellularized ovine cartilage infill to serve as a "biologic rebar", yielding eight total treatment groups. Scaffolds were implanted heterotopically on rat dorsa (N = 4 implants per rat) for explant after 3, 6, and 12 months followed by volumetric, histopathologic, and biomechanical analysis. Low porosity implants with either minced cartilage or PLA rebar infill had superior volume retention across all timepoints. Overall, histopathologic and immunohistochemical analysis showed a resolving inflammatory response with an M1/M2 ratio consistently favoring tissue regeneration over the study course. However, xenograft cartilage showed areas of degradation and pro-inflammatory infiltrate contributing to volume and contour loss over time. Biomechanical analysis revealed all constructs had equilibrium and instantaneous moduli higher than human septal cartilage controls. Biocompatible, degradable polymer implants can induce healthy neotissue ingrowth resulting in guided soft tissue augmentation and offer a simple, customizable and clinically-translatable alternative to existing craniofacial soft tissue augmentation materials. PLA-only implants may be superior to combination PLA and xenograft implants due to contour irregularities associated with cartilage degradation.

Heterogeneous distribution of viscosupplements in vivo is correlated to ex vivo frictional properties of equine cartilage.

Intra-articular injections of hyaluronic acid (HA) are the cornerstone of osteoarthritis (OA) treatments. However, the mechanism of action and efficacy of HA viscosupplementation are debated. As such, there has been recent interest in developing synthetic viscosupplements. Recently, a synthetic 4 wt% polyacrylamide (pAAm) hydrogel was shown to effectively lubricate and bind to the surface of cartilage in vitro. However, its ability to localize to cartilage and alter the tribological properties of the tissue in a live articulating large animal joint is not known. The goal of this study was to quantify the distribution and extent of localization of pAAm in the equine metacarpophalangeal or metatarsophalangeal joint (fetlock joint), and determine whether preferential localization of pAAm influences the tribological properties of the tissue. An established planar fluorescence imaging technique was used to visualize and quantify the distribution of fluorescently labeled pAAm within the joint. While the pAAm hydrogel was present on all surfaces, it was not uniformly distributed, with more material present near the site of the injection. The lubricating ability of the cartilage in the joint was then assessed using a custom tribometer across two orders of magnitude of sliding speed in healthy synovial fluid. Cartilage regions with a greater coverage of pAAm, that is, higher fluorescent intensities, exhibited friction coefficients nearly 2-fold lower than regions with lesser pAAm (Rrm = -0.59, p < 0.001). Collectively, the findings from this study indicate that intra-articular viscosupplement injections are not evenly distributed inside a joint, and the tribological outcomes of these materials is strongly determined by the ability of the material to localize to the articulating surfaces in the joint.

Application of a variational autoencoder for clustering and analyzing in situ articular cartilage cellular response to mechanical stimuli.

In various biological systems, analyzing how cell behaviors are coordinated over time would enable a deeper understanding of tissue-scale response to physiologic or superphysiologic stimuli. Such data is necessary for establishing both normal tissue function and the sequence of events after injury that lead to chronic disease. However, collecting and analyzing these large datasets presents a challenge-such systems are time-consuming to process, and the overwhelming scale of data makes it difficult to parse overall behaviors. This problem calls for an analysis technique that can quickly provide an overview of the groups present in the entire system and also produce meaningful categorization of cell behaviors. Here, we demonstrate the application of an unsupervised method-the Variational Autoencoder (VAE)-to learn the features of cells in cartilage tissue after impact-induced injury and identify meaningful clusters of chondrocyte behavior. This technique quickly generated new insights into the spatial distribution of specific cell behavior phenotypes and connected specific peracute calcium signaling timeseries with long term cellular outcomes, demonstrating the value of the VAE technique.

Recombinant manufacturing of multispecies biolubricants.

Lubricin, a lubricating glycoprotein abundant in synovial fluid, forms a low-friction brush polymer interface in tissues exposed to sliding motion including joints, tendon sheaths, and the surface of the eye. Despite its therapeutic potential in diseases such as osteoarthritis and dry eye disease, there are few sources available. Through rational design, we developed a series of recombinant lubricin analogs that utilize the species-specific tissue-binding domains at the N- and C-termini to increase biocompatibility while replacing the central mucin domain with an engineered variant that retains the lubricating properties of native lubricin. In this study, we demonstrate the tissue binding capacity of our engineered lubricin product and its retention in the joint space of rats. Next, we present a new bioprocess chain that utilizes a human-derived cell line to produce O-glycosylation consistent with that of native lubricin and a purification strategy that capitalizes on the positively charged, hydrophobic N- and C-terminal domains. The bioprocess chain is demonstrated at 10 L scale in industry-standard equipment utilizing commonly available ion exchange, hydrophobic interaction and size exclusion chromatography resins. Finally, we confirmed the purity and lubricating properties of the recombinant biolubricant. The biomolecular engineering and bioprocessing strategies presented here are an effective means of lubricin production and could have broad applications to the study of mucins in general.

Bioengineering Full-scale auricles using 3D-printed external scaffolds and decellularized cartilage xenograft.

Reconstruction of the human auricle remains a formidable challenge for plastic surgeons. Autologous costal cartilage grafts and alloplastic implants are technically challenging, and aesthetic and/or tactile outcomes are frequently suboptimal. Using a small animal "bioreactor", we have bioengineered full-scale ears utilizing decellularized cartilage xenograft placed within a 3D-printed external auricular scaffold that mimics the size, shape, and biomechanical properties of the native human auricle. The full-scale polylactic acid ear scaffolds were 3D-printed based upon data acquired from 3D photogrammetry of an adult ear. Ovine costal cartilage was processed either through mincing (1 mm3) or zesting (< 0.5 mm3), and then fully decellularized and sterilized. At explantation, both the minced and zested neoears maintained the size and contour complexities of the scaffold topography with steady tissue ingrowth through 6 months in vivo. A mild inflammatory infiltrate at 3 months was replaced by homogenous fibrovascular tissue ingrowth enveloping individual cartilage pieces at 6 months. All ear constructs were pliable, and the elasticity was confirmed by biomechanical analysis. Longer-term studies of the neoears with faster degrading biomaterials will be warranted for future clinical application. STATEMENT OF SIGNIFICANCE: Accurate reconstruction of the human auricle has always been a formidable challenge to plastic surgeons. In this article, we have bioengineered full-scale ears utilizing decellularized cartilage xenograft placed within a 3D-printed external auricular scaffold that mimic the size, shape, and biomechanical properties of the native human auricle. Longer-term studies of the neoears with faster degrading biomaterials will be warranted for future clinical application.

Loss of effective lubricating viscosity is the primary mechanical marker of joint inflammation in equine synovitis.

Inflammation of the synovium, known as synovitis, plays an important role in the pathogenesis of osteoarthritis (OA). Synovitis involves the release of a wide variety of pro-inflammatory mediators in synovial fluid (SF) that damage the articular cartilage extracellular matrix and induce death and apoptosis in chondrocytes. The composition of synovial fluid is dramatically altered by inflammation in OA, with changes to both hyaluronic acid and lubricin, the primary lubricating molecules in SF. However, the relationship between key biochemical markers of joint inflammation and mechanical function of SF is not well understood. Here, we demonstrate the application of a novel analytical framework to measure the effective viscosity for SF lubrication of cartilage, which is distinct from conventional rheological viscosity. Notably, in a well-established equine model of synovitis, this effective lubricating viscosity decreased by up to 10,000-fold for synovitis SF compared to a ~4 fold change in conventional viscosity measurements. Further, the effective lubricating viscosity was strongly inversely correlated (r = -0.6 to -0.8) to multiple established biochemical markers of SF inflammation, including white blood cell count, prostaglandin E2 (PGE2), and chemokine ligand (CCLs) concentrations, while conventional measurements of viscosity were poorly correlated to these markers. These findings demonstrate the importance of experimental and analytical approaches to characterize functional lubricating properties of synovial fluid and their relationships to soluble biomarkers to better understand the progression of OA.

Microscale strain concentrations in tissue-engineered osteochondral implants are dictated by local compositional thresholds and architecture.

Tissue-engineered osteochondral implants manufactured from condensed mesenchymal stem cell bodies have shown promise for treating focal cartilage defects. Notably, such manufacturing techniques have shown to successfully recapture the bulk mechanical properties of native cartilage. However, the relationships among the architectural features, local composition, and micromechanical environment within tissue-engineered cartilage from cell-based aggregates remain unclear. Understanding such relationships is crucial for identifying critical parameters that can predict in vivo performance. Therefore, this study investigated the relationship among architectural features, composition, and micromechanical behavior of tissue-engineered osteochondral implants. We utilized fast-confocal microscopy combined with a strain mapping technique to analyze the micromechanical behavior under quasi-static loading, as well as Fourier Transform Infrared Spectroscopy to analyze the local compositions. More specifically, we investigated the architectural features and compositional distributions generated from tissue maturation, along with macro- and micro-level strain distributions. Our results showed that under compression, cell-based aggregates underwent deformation followed by body movement, generating high local strain around the boundaries, where local aggrecan concentration was low and local collagen concentration was high. By analyzing the micromechanics and composition at the single aggregate length scale, we identified a strong threshold relationship between local strain and compositions. Namely at the aggrecan concentration below 0.015 arbitrary unit (A.U.) and the collagen concentration above 0.15 A.U., the constructs experienced greater than threefold increase in compressive strain. Overall, this study suggests that local compositional features are the primary driver of the local mechanical environment in tissue-engineered cartilage constructs, providing insight into potential quality control parameters for manufacturing tissue-engineered constructs.

Finite element modeling to predict the influence of anatomic variation and implant placement on performance of biological intervertebral disc implants.

Background: Tissue-engineered intervertebral disc (TE-IVD) constructs are an attractive therapy for treating degenerative disc disease and have previously been investigated in vivo in both large and small animal models. The mechanical environment of the spine is notably challenging, in part due to its complex anatomy, and implants may require additional mechanical support to avoid failure in the early stages of implantation. As such, the design of suitable support implants requires rigorous validation. Methods: We created a FE model to simulate the behavior of the IVD cages under compression specific to the anatomy of the porcine cervical spine, validated the FE model using an animal model, and predicted the effects of implant location and vertebral angle of the motion segment on implant behavior. Specifically, we tested anatomical positioning of the superior vertebra and placement of the implant. We analyzed corresponding stress and strain distributions. Results: Results demonstrated that the anatomical geometry of the porcine cervical spine led to concentrated stress and strain on the posterior side of the cage. This stress concentration was associated with the location of failure of the cages reported in vivo, despite superior mechanical properties of the implant. Furthermore, placement of the cage was found to have profound effects on migration, while the angle of the superior vertebra affected stress concentration of the cage. Conclusions: This model can be utilized both to inform surgical procedures and provide insight on future cage designs and can be adopted to models without the use of in vivo animal models.

Alginate Conjugation Increases Toughness in Auricular Chondrocyte Seeded Collagen Hydrogels.

Current auricular cartilage replacements for pediatric microtia fail to address the need for long-term integration and neocartilage formation. While collagen hydrogels have been successful in fostering neocartilage formation, the toughness and extensibility of these materials do not match that of native tissue. This study used the N-terminal functionalization of collagen with alginate oligomers to improve toughness and extensibility through metal-ion complexation. Alginate conjugation was confirmed via FTIR spectroscopy. The retention of native collagen fibrillar structure, thermal gelation, and helical conformation in functionalized gels was confirmed via scanning electron microscopy, oscillatory shear rheology, and circular dichroism spectroscopy, respectively. Alginate-calcium complexation enabled a more than two-fold increase in modulus and work density in functionalized collagen with the addition of 50 mM CaCl2, whereas unmodified collagen decreased in both modulus and work density with increasing calcium concentration. Additionally, the extensibility of alginate-functionalized collagen was increased at 25 and 50 mM CaCl2. Following 2-week culture with auricular chondrocytes, alginate-functionalization had no effect on the cytocompatibility of collagen gels, with no effects on cell density, and increased glycosaminoglycan deposition. Custom MATLAB video analysis was then used to quantify fracture toughness, which was more than 5-fold higher following culture in functionalized collagen and almost three-fold higher in unmodified collagen.

Instabilities induced by mechanical loading determine the viability of chondrocytes grown on porous scaffolds.

Tissue-engineered cartilage constructs have shown promise to treat focal cartilage defects in multiple clinical studies. Notably, products in clinical use or in late-stage clinical trials often utilize porous collagen scaffolds to provide mechanical support and attachment sites for chondrocytes. Under loading, both the local mechanical responses of collagen scaffolds and the corresponding cellular outcomes are poorly understood, despite their wide use. As such, the architecture of collagen scaffolds varies significantly among tissue-engineered cartilage products, but the effects of such architectures on construct mechanics and cell viability are not well understood. This study investigated the effects of local mechanical responses of collagen scaffolds on chondrocyte viability in tissue-engineered cartilage constructs. We utilized fast confocal microscopy combined with a strain mapping technique to analyze the architecture-dependent instabilities under quasi-static loading and subsequent chondrocyte death in honeycomb and sponge scaffolds. More specifically, we compared the isotropic and the orthotropic planes for each type of collagen scaffold. Under compression, both planes exhibited elastic, buckled, and densified deformation modes. In both loading directions, cell death was minimal in regions that experienced elastic deformation mode and a trend of increase in buckled mode. More interestingly, we saw a significant increase in cell death in densified mode. Overall, this study suggests that local instabilities are directly correlated to chondrocyte death in tissue-engineered cartilage constructs, highlighting the importance of understanding the architecture-dependent local mechanical responses under loading.

Understanding the Influence of Local Physical Stimuli on Chondrocyte Behavior.

Investigating the mechanobiology of chondrocytes is challenging due to the complex micromechanical environment of cartilage tissue. The innate zonal differences and poroelastic properties of the tissue combined with its heterogeneous composition create spatial- and temporal-dependent cell behavior, which further complicates the investigation. Despite the numerous challenges, understanding the mechanobiology of chondrocytes is crucial for developing strategies for treating cartilage related diseases as chondrocytes are the only cell type within the tissue. The effort to understand chondrocyte behavior under various mechanical stimuli has been ongoing over the last 50 years. Early studies examined global biosynthetic behavior under unidirectional mechanical stimulus. With the technological development in high-speed confocal imaging techniques, recent studies have focused on investigating real-time individual and collective cell responses to multiple / combined modes of mechanical stimuli. Such efforts have led to tremendous advances in understanding the influence of local physical stimuli on chondrocyte behavior. In addition, we highlight the wide variety of experimental techniques, spanning from static to impact loading, and analysis techniques, from biochemical assays to machine learning, that have been utilized to study chondrocyte behavior. Finally, we review the progression of hypotheses about chondrocyte mechanobiology and provide a perspective on the future outlook of chondrocyte mechanobiology.

Removal of GAGs Regulates Mechanical Properties, Collagen Fiber Formation, and Alignment in Tissue Engineered Meniscus.

The complex fibrillar architecture of native meniscus is essential for proper function and difficult to recapitulate in vitro. In the native meniscus, proteoglycan content is low during the development of collagen fibers and progressively increases with aging. In vitro, fibrochondrocytes produce glycosaminoglycans (GAGs) early in culture, in contrast to native tissue, where they are deposited after collagen fibers have formed. This difference in the timing of GAG production hinders the formation of a mature fiber network in such in vitro models. In this study, we removed GAGs from collagen gel-based tissue engineered constructs using chondroitinase ABC (cABC) and evaluated the effect on the formation and alignment of collagen fibers and the subsequent effect on tensile and compressive mechanical properties. Removal of GAGs during maturation of in vitro constructs improved collagen fiber alignment in tissue engineered meniscus constructs. Additionally, removal of GAGs during maturation improved fiber alignment without compromising compressive strength, and this removal improved not only fiber alignment and formation but also tensile properties. The increased fiber organization in cABC-treated groups also appeared to influence the size, shape, and location of defects in these constructs, suggesting that treatment may prevent the propagation of large defects under loading. This data gives another method of modulating the ECM for improved collagen fiber formation and mechanical properties in tissue engineered constructs.

Polyacrylamide hydrogel lubricates cartilage after biochemical degradation and mechanical injury.

Intra-articular injections of hyaluronic acid have been a mainstay of osteoarthritis treatment for decades. However, controversy surrounds the mechanism of action and efficacy of this therapy. As such, there has been recent interest in developing synthetic lubricants that lubricate cartilage. Recently, a synthetic 4 wt% polyacrylamide (pAAm) hydrogel was shown to effectively decrease lameness in horses. However, its mechanism of action and ability to lubricate cartilage is unknown. The goal of this study was to characterize the lubricating ability of this hydrogel and determine its efficacy for healthy and degraded cartilage. The study utilized previously established IL-1ß-induced biochemical degradation and mechanical impact injury models to degrade cartilage. The lubricating ability of the hydrogel was then characterized using a custom-built tribometer using a glass counterface and friction was evaluated using the Stribeck framework for articular cartilage. pAAm hydrogel was shown to significantly lower the friction coefficient of cartilage explants from both degradation models (30%-40% reduction in friction relative to controls). A striking finding from this study was the aggregation of the pAAm hydrogel at the articulating surface. The surface aggregation was observed in the histological sections of explants from all treatment groups after tribological evaluation. Using the Stribeck framework, the hydrogel was mapped to higher Sommerfeld numbers and was characterized as a viscous lubricant predominantly in the minimum friction mode. In summary, this study revealed that pAAm hydrogel lubricates native and degraded cartilage explants effectively and may have an affinity for the articulating surface of the cartilage.

Controlling collagen gelation pH to enhance biochemical, structural, and biomechanical properties of tissue-engineered menisci.

Collagen-based hydrogels have been widely used in biomedical applications due to their biocompatibility. Enhancing mechanical properties of collagen gels remains challenging while maintaining biocompatibility. Here, we demonstrate that gelation pH has profound effects on cellular activity, collagen fibril structure, and mechanical properties of the fibrochondrocyte-seeded collagen gels in both short- and long-terms. Acidic and basic gelation pH, below pH 7.0 and above 8.5, resulted in dramatic cell death. Gelation pH ranging from 7.0 to 8.5 showed a relatively high cell viability. Furthermore, physiologic gelation (pH 7.5) showed the greatest collagen deposition while glycosaminoglycan deposition appeared independent of gelation pH. Scanning electron microscopy showed that neutral and physiologic gelation pH, 7.0 and 7.5, exhibited well-aligned collagen fibril structure on day 0 and enhanced collagen fibril structure with laterally joined fibrils on day 30. However, basic pH, 8.0 and 8.5, displayed a densely packed collagen fibril structure on day 0, which was also persistent on day 30. Initial equilibrium modulus increased with increasing gelation pH. Notably, after 30 days of culture, gelation pH of 7.5 and 8.0 showed the highest equilibrium modulus, reaching 150 -160 kPa. While controlling gelation pH is simply achieved compared with other strategies to improve mechanical properties, its influences on biochemical and biomechanical properties of the collagen gel are long-lasting. As such, gelation pH is a useful means to modulate both biochemical and biomechanical properties of the collagen-based hydrogels and can be utilized for diverse types of tissue engineering due to its simple application.

STRAINS: A big data method for classifying cellular response to stimuli at the tissue scale.

Cellular response to stimulation governs tissue scale processes ranging from growth and development to maintaining tissue health and initiating disease. To determine how cells coordinate their response to such stimuli, it is necessary to simultaneously track and measure the spatiotemporal distribution of their behaviors throughout the tissue. Here, we report on a novel SpatioTemporal Response Analysis IN Situ (STRAINS) tool that uses fluorescent micrographs, cell tracking, and machine learning to measure such behavioral distributions. STRAINS is broadly applicable to any tissue where fluorescence can be used to indicate changes in cell behavior. For illustration, we use STRAINS to simultaneously analyze the mechanotransduction response of 5000 chondrocytes-over 20 million data points-in cartilage during the 50 ms to 4 hours after the tissue was subjected to local mechanical injury, known to initiate osteoarthritis. We find that chondrocytes exhibit a range of mechanobiological responses indicating activation of distinct biochemical pathways with clear spatial patterns related to the induced local strains during impact. These results illustrate the power of this approach.

Mesenchymal stromal cells donate mitochondria to articular chondrocytes exposed to mitochondrial, environmental, and mechanical stress.

Articular cartilage has limited healing capacity and no drugs are available that can prevent or slow the development of osteoarthritis (OA) after joint injury. Mesenchymal stromal cell (MSC)-based regenerative therapies for OA are increasingly common, but questions regarding their mechanisms of action remain. Our group recently reported that although cartilage is avascular and relatively metabolically quiescent, injury induces chondrocyte mitochondrial dysfunction, driving cartilage degradation and OA. MSCs are known to rescue injured cells and improve healing by donating healthy mitochondria in highly metabolic tissues, but mitochondrial transfer has not been investigated in cartilage. Here, we demonstrate that MSCs transfer mitochondria to stressed chondrocytes in cell culture and in injured cartilage tissue. Conditions known to induce chondrocyte mitochondrial dysfunction, including stimulation with rotenone/antimycin and hyperoxia, increased transfer. MSC-chondrocyte mitochondrial transfer was blocked by non-specific and specific (connexin-43) gap-junction inhibition. When exposed to mechanically injured cartilage, MSCs localized to areas of matrix damage and extended cellular processes deep into microcracks, delivering mitochondria to chondrocytes. This work provides insights into the chemical, environmental, and mechanical conditions that can elicit MSC-chondrocyte mitochondrial transfer in vitro and in situ, and our findings suggest a new potential role for MSC-based therapeutics after cartilage injury.

Pre-glycation impairs gelation of high concentration collagen solutions.

There remains a need for stiffer collagen hydrogels for tissue engineering and disease modeling applications. Pre-glycation, or glycation of collagen in solution prior to gelation, has been shown to increase the mechanics of collagen hydrogels while maintaining high viability of encapsulated cells. The stiffness of glycated collagen gels can be increased by increasing the collagen concentration, sugar concentration, and glycation time. However, previous studies on pre-glycation of collagen have used low collagen concentrations and/or low sugar concentrations and have not investigated the effect of glycation time. Therefore, the objective of this study was to determine the effects of pre-glycation with high sugar concentrations (up to 500 mM) and extended glycation times (up to 21 days) on high concentration collagen (8 mg/ml). The addition of sugar to the collagen and the formation of advanced glycation end products (AGEs) were quantified. The ability to gel successfully and rheological properties were determined and correlated with biochemical characterizations. Successful collagen gelation and rheological properties of pre-glycated collagen were found to be strongly dependent on the ratio of added sugars to added AGEs with high ratios impairing gelation and low ratios resulting in optimal storage moduli. There is likely a competing effect during pre-glycation of the formation of AGEs resulting in crosslinking of collagen and the formation of Amadori intermediates acting to increase collagen solubility. Overall, this study shows that collagen glycation can be optimized by increasing the formation of AGEs while maintaining a low ratio of added sugar to added AGEs.

Simple synthesis of soft, tough, and cytocompatible biohybrid composites.

Collagen is the most abundant component of mammalian extracellular matrices. As such, the development of materials that mimic the biological and mechanical properties of collagenous tissues is an enduring goal of the biomaterials community. Despite the development of molded and 3D printed collagen hydrogel platforms, their use as biomaterials and tissue engineering scaffolds is hindered by either low stiffness and toughness or processing complexity. Here, we demonstrate the development of stiff and tough biohybrid composites by combining collagen with a zwitterionic hydrogel through simple mixing. This combination led to the self-assembly of a nanostructured fibrillar network of collagen that was ionically linked to the surrounding zwitterionic hydrogel matrix, leading to a composite microstructure reminiscent of soft biological tissues. The addition of 5-15 mg mL-1 collagen and the formation of nanostructured fibrils increased the elastic modulus of the composite system by 40% compared to the base zwitterionic matrix. Most notably, the addition of collagen increased the fracture energy nearly 11-fold ([Formula: see text] 180 J m-2) and clearly delayed crack initiation and propagation. These composites exhibit elastic modulus ([Formula: see text] 0.180 MJ) and toughness ([Formula: see text]0.617 MJ m-3) approaching that of biological tissues such as articular cartilage. Maintenance of the fibrillar structure of collagen also greatly enhanced cytocompatibility, improving cell adhesion more than 100-fold with >90% cell viability.

Efficient engineering of human auricular cartilage through mesenchymal stem cell chaperoning.

A major challenge to the clinical translation of tissue-engineered ear scaffolds for ear reconstruction is the limited auricular chondrocyte (hAuC) yield available from patients. Starting with a relatively small number of chondrocytes in culture results in dedifferentiation and loss of phenotype with subsequent expansion. To significantly decrease the number of chondrocytes required for human elastic cartilage engineering, we co-cultured human mesenchymal stem cells (hMSCs) with HAuCs to promote healthy elastic cartilage formation. HAuCs along with human bone marrow-derived hMSCs were encapsulated into 1% Type I collagen at 25 million/mL total cell density with different ratios (HAuCs/hMSCs: 10/90, 25/75, 50/50) and then injected into customized 3D-printed polylactic acid (PLA) ridged external scaffolds, which simulate the shape of the auricular helical rim, and implanted subcutaneously in nude rats for 1, 3 and 6 months. The explanted constructs demonstrated near complete volume preservation and topography maintenance of the ridged "helical" feature after 6 months with all ratios. Cartilaginous appearing tissue formed within scaffolds by 3 months, verified by histologic analysis demonstrating mature elastic cartilage within the constructs with chondrocytes seen in lacunae within a Type II collagen and proteoglycan-enriched matrix, and surrounded by a neoperichondrial external layer. Compressive mechanical properties comparable to human elastic cartilage were achieved after 6 months. Co-implantation of hAuCs and hMSCs in collagen within an external scaffold efficiently produced shaped human elastic cartilage without volume loss even when hAuC comprised only 10% of the implanted cell population, marking a crucial step toward the clinical translation of auricular tissue engineering.

Off-the-Shelf Nipple Engineering: Neonipple Formation via Implantation of Scaffolded Decellularized Ovine Xenograft.

BACKGROUND: Nipple reconstruction is widely regarded as the final step in postmastectomy breast reconstruction. While grafts, local flaps, or combination approaches have been used in nipple reconstruction, none has been able to achieve reliable long-term projection preservation. In response, we have sought to bioengineer neonipples in situ via the implantation of processed, decellularized cartilage xenografts placed within 3-dimensional-printed polylactic acid (PLA) scaffolds. MATERIALS AND METHODS: External nipple scaffolds were designed in-house and 3-dimensional-printed with PLA filament. Decellularized ovine xenograft infill was prepared and processed by mincing or zesting. All nipple scaffolds were placed subcutaneously on the dorsa of Sprague-Dawley rats and explanted after 1, 3, and 6 months for analysis. RESULTS: Explanted nipple scaffolds demonstrated gross maintenance of scaffold shape, diameter, and projection with accompanying increases in tissue volume. Histologic analyses revealed preservation of native cartilage architecture after 6 months without evidence of degradation. Analysis of formed tissue within the scaffolds revealed a progressive invasion of fibrovascular tissue with identifiable vascular channels and adipose tissue after 6 months in vivo. Confined compression testing revealed equilibrium moduli of both minced and zested samples that were within the expected range of previously reported human nipple tissue, while these data revealed no differences in the mechanical properties of the neotissue between time points or processing techniques. CONCLUSIONS: These preliminary data support potential use of decellularized allograft to foster healthy tissue ingrowth within a PLA scaffold, thereby offering a novel solution to current limitations in nipple reconstruction.