Borehole muography of subsurface reservoirs.

Imaging subsurface rock formations or geological objects like oil and gas reservoirs, mineral deposits, cavities or even magmatic plumbing systems under active volcanoes has been for many years a major quest of geoscientists. Since these subsurface objects cannot be observed directly, different indirect methods have been developed. These methods are all based on variations of certain physical properties of the subsurface materials that can be detected from the ground surface or from boreholes. To determine the density distribution, a new imaging technique using cosmic-ray muon detectors deployed in a borehole has been developed and a first prototype of a borehole muon detector successfully tested. In addition to providing a static image of the subsurface density in three dimensions (or three-dimensional tomography), borehole muography can also inform on the variations of density with time, which recently became of major importance with the injection of large volumes of fluids, mainly water and CO2, in porous subsurface reservoirs (e.g. aquifer storage and recovery, wastewater disposal, enhanced oil recovery and carbon sequestration). This raises several concerns about the risk of leakage and the mechanical integrity of the reservoirs. Determining the field scale induced displacement of fluids by geophysical methods like muography is thus a priority.This article is part of the Theo Murphy meeting issue 'Cosmic-ray muography'.

Experimental study of crossover from capillary to viscous fingering for supercritical CO2-water displacement in a homogeneous pore network.

Carbon sequestration in saline aquifers involves displacing brine from the pore space by supercritical CO(2) (scCO(2)). The displacement process is considered unstable due to the unfavorable viscosity ratio between the invading scCO(2) and the resident brine. The mechanisms that affect scCO(2)-water displacement under reservoir conditions (41 °C, 9 MPa) were investigated in a homogeneous micromodel. A large range of injection rates, expressed as the dimensionless capillary number (Ca), was studied in two sets of experiments: discontinuous-rate injection, where the micromodel was saturated with water before each injection rate was imposed, and continuous-rate injection, where the rate was increased after quasi-steady conditions were reached for a certain rate. For the discontinuous-rate experiments, capillary fingering and viscous fingering are the dominant mechanisms for low (logCa ≤ -6.61) and high injection rates (logCa ≥ -5.21), respectively. Crossover from capillary to viscous fingering was observed for logCa = -5.91 to -5.21, resulting in a large decrease in scCO(2) saturation. The discontinuous-rate experimental results confirmed the decrease in nonwetting fluid saturation during crossover from capillary to viscous fingering predicted by numerical simulations by Lenormand et al. (J. Fluid Mech.1988, 189, 165-187). Capillary fingering was the dominant mechanism for all injection rates in the continuous-rate experiment, resulting in monotonic increase in scCO(2) saturation.