The Copper Reduction Potential Determines the Reductive Cytotoxicity: Relevance to the Design of Metal-Organic Antitumor Drugs.

Copper-organic compounds have gained momentum as potent antitumor drug candidates largely due to their ability to generate an oxidative burst upon the transition of Cu2+ to Cu1+ triggered by the exogenous-reducing agents. We have reported the differential potencies of a series of Cu(II)-organic complexes that produce reactive oxygen species (ROS) and cell death after incubation with N-acetylcysteine (NAC). To get insight into the structural prerequisites for optimization of the organic ligands, we herein investigated the electrochemical properties and the cytotoxicity of Cu(II) complexes with pyridylmethylenethiohydantoins, pyridylbenzothiazole, pyridylbenzimidazole, thiosemicarbazones and porphyrins. We demonstrate that the ability of the complexes to kill cells in combination with NAC is determined by the potential of the Cu+2 → Cu+1 redox transition rather than by the spatial structure of the organic ligand. For cell sensitization to the copper-organic complex, the electrochemical potential of the metal reduction should be lower than the oxidation potential of the reducing agent. Generally, the structural optimization of copper-organic complexes for combinations with the reducing agents should include uncharged organic ligands that carry hard electronegative inorganic moieties.

Metal Chalcogenide-Hydroxide Hybrids as an Emerging Family of Two-Dimensional Heterolayered Materials: An Early Review.

Two-dimensional (2D) materials and phenomena attract huge attention in modern science. Herein, we introduce a family of layered materials inspired by the minerals valleriite and tochilinite, which are composed of alternating "incompatible", and often incommensurate, quasi-atomic sheets of transition metal chalcogenide (sulfides and selenides of Fe, Fe-Cu and other metals) and hydroxide of Mg, Al, Fe, Li, etc., stacked via electrostatic interaction rather than van der Waals forces. We survey the data available on the composition and structure of the layered minerals, laboratory syntheses of such materials and the effect of reaction conditions on the phase purity, morphology and composition of the products. The spectroscopic results (Mössbauer, X-ray photoelectron, X-ray absorption, Raman, UV-vis, etc.), physical (electron, magnetic, optical and some others) characteristics, a specificity of thermal behavior of the materials are discussed. The family of superconductors (FeSe)·(Li,Fe)(OH) having a similar layered structure is briefly considered too. Finally, promising research directions and applications of the valleriite-type substances as a new class of prospective multifunctional 2D materials are outlined.

Specificity of the Thermal Stability and Reactivity of Two-Dimensional Layered Cu-Fe Sulfide-Mg-Based Hydroxide Compounds (Valleriites).

We recently synthesized prospective new materials composed of alternating quasi-atomic sheets of brucite-type hydroxide (Mg, Fe)(OH)2 and CuFe1-xS2 sulfide (valleriites). Herein, their thermal behavior important for many potential applications has been studied in inert (Ar) and oxidative (20% O2) atmospheres using thermogravimetry (TG) and differential scanning calorimetry (DSC) analyses and characterization with X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX). In the Ar media, the processes are determined by the dehydroxylation of the hydroxide layers forming MgO, with the temperature of the major endothermic maximum of the mass loss at 413 °C. Sulfide sheets start to degrade below 500 °C and melt at nearly 800 °C, with bornite, chalcopyrite, and troilite specified as the final products. In the oxidative atmosphere, the exothermic reactions with the mass increase peaked at 345 and 495 °C, corresponding to the partial and major oxidations of Cu-Fe sulfide layers. Sulfur oxides captured in magnesium hydroxide layers to form MgSO4 compromised the layer integrity and promoted the oxidation of the sulfide entities. The final products also contained minor MgO, Cu2MgO3, Fe3O4, and MgFe2O4 phases. Samples doped with Al, which decreases the content of Fe in hydroxide layers, show notably impeded decay of valleriite in argon but facilitated the oxidation of Cu-Fe sulfides, while the impact of Li (it slightly increases the number of the Fe-OH sites) was less expressed. The mutual stabilization of the two-dimensional (2D) hydroxide and sulfide layers upon heating in an inert atmosphere but not in oxygen as compared with bulk brucite and chalcopyrite was suggested to explain high thermal resistance across the stacked incommensurate sheets, which slows down the endothermic reactions and accelerates the exothermic oxidation; the high number of Fe atoms in the hydroxide sheets are expected to promote the phonon exchange and heat transfer between the layers.

New data on mobility of transuranium elements in sediments of the Yenisei River.

The inflow of transuranium elements to the Yenisei River was previously associated with the production of weapons-grade plutonium at the Mining-and-Chemical Combine (MCC, Zheleznogorsk, Russia), but the source of transuranium elements in the River today is fabrication of MOX fuel that started recently at the MCC. The current study presents results of sequential chemical extraction of radionuclides from sediment samples collected in 2014 and 2020 in two areas near the MCC discharge site and compares these results with the data obtained previously by sequential extraction of sediments collected during 1999-2007. Over the study period, the strength of binding of 137Cs and 60Co in the Yenisei River sediments was high (up to 100%) and remained so, while the percentages of 241Am and 152Eu in residual solids after sequential extraction increased considerably and the percentage of 239,240Pu in residual solids decreased in samples from all study areas. In samples collected at the position located close to the MCC discharge site, the percentages of the strongly bound 241Am and 152Eu as well as 239,240Pu were lower than in the samples from the other positions. The study demonstrated an enormous increase in 239,240Pu activity concentration in the top sediment layers collected at all positions in 2020 relative to 2014. In the same period, as literature data suggest, 239,240Pu activity concentrations also increased in aquatic organisms of the Yenisei River, which can be indicative of the growing potential bioavailability of plutonium in the aquatic ecosystem, which could be caused by the presence of the mobile form of plutonium in the routine discharges from the MCC.

Reactive Matrices for Analytical Matrix-Assisted Laser Desorption/Ionization (MALDI) Mass Spectrometry.

In recent years, a special focus is placed on the usage of reactive matrices for analytical matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS). Since 2003, when the term "reactive matrices" was suggested and the dignity of compounds, possessing dualistic properties as matrices and derivatization agents was demonstrated, corresponding approach has found application in various fields and, in particular, in bioanalysis (metabolomics, lipidomics, etc.). The main advantage of this methodology is that it reduces sample treatment time, simplifies the procedure of sample handling, improves the sensitivity of analysis, enhances the molecular identification and profiling. Within the framework of this review, the main attention is paid to "true" reactive matrices that interact with analyte molecules through an exchange or addition reactions. A special section discusses practical application of reactive matrices in the determination of the distribution of targeted and non-targeted organic substances on the surface of biological tissue sections by MALDI-MS imaging. In this critical review, a controversial proposal is made to consider protonating and deprotonating matrices as reactive, because they can undergo a chemical reaction such as proton transfer that occurs in both target solution and MALDI plume. In this respect, special attention is paid to "proton sponge" matrices that have found a wide application in the analysis of various acidic compounds by MALDI-MS in the negative mode. Historical data on the formation of ions and the fate of matrices in MALDI are considered at the beginning of this article.

A simple soft ionization approach for GC-MS assisted by capillary array.

Electron ionization (EI) is the most widely used ionization method in gas chromatography/mass spectrometry (GC-MS). This method possesses a lot of advantages including versatility for various classes of volatile and semi volatile organic compounds, high sensitivity, structure informativity and reproducibility, production of database searchable mass spectra. On the other hand there are a number of compounds, which molecular ions are not stable enough to produce corresponding peaks in EI mass spectra, making it difficult to determine structures of compounds not presented in databases. A new approach allowing easy implementation of EI in a molecular beam formed by a capillary assembly is proposed for discussion in this communication. Primary experimental results achieved using this approach demonstrate its possibility to produce suitable for database search mass spectra with increased intensity of molecular ion peak.

Derivatization to increase the detectability of small peptides in blood serum in the analysis by ESI and MALDI high resolution mass spectrometric methods.

This work highlights the efficient approach to highly sensitive determination of dipeptides that can present in biological liquids at very low and trace quantities. The approach involves preliminary derivatization of peptides with tris(2,4,6-trimethoxyphenyl)-methyl carbenium hexafluoroborate followed by ESI and MALDI high-resolution mass spectrometry. Using model dipeptides with various amino acid compositions and sequences, it was shown that the derivatization reaction proceeded smoothly in mild conditions and gave rise to pink-red colored salt derivatives. Ready cations of interest for the analysis are easily desorbed from the salt-derivatives providing strong signals in ESI and MALDI mass spectra and this ensures high sensitivity of the analysis. Another positive aspect is the removal of the target signal from the region of a matrix noise, since the introduced fragment possesses a large mass increment (359 Da). High resolution mass spectrometry, which provides the determination of accurate weights and elemental compositions of ions, was used to reliably detect model dipeptides added to artificial urine and blood serum. A number of these dipeptides was shown to be present in real blood serum collected from volunteers. Collision induced dissociation of precursor cations composed of derivatizing reagent and dipeptide moieties gives rise to characteristic and simple fragmentation mass spectra. A comparison of limits of detection (LOD) measured for non-modified and derivatized dipeptides showed that the latter derivatives provide the highest sensitivity when LOD is determined by using multiple reaction monitoring (MRM) transitions. The suggested derivatization approach was shown to be useful for unambiguous identification of special dipeptides in artificial media and dietary supplements.

The Use of Polydialkylsiloxanes/Triflic Acid as Derivatization Agents in the Analysis of Sulfur-Containing Aromatics by "Soft"-Ionization Mass Spectrometry.

Polycyclic aromatic sulfur-containing compounds are widely distributed in oil, especially in its low-volatile and heavy fractions (resins, asphaltenes), and this dictates the need for their determination when reliable methods for sulfur removing, cleaning and processing oil are developed. In these cases, "soft" ionization mass spectrometry methods, based on electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI), are particularly effective. However, aromatic sulfur-containing compounds have low polarity and cannot be readily ionized by these methods. To overcome the problem, their preliminary conversion into sulfonium salts by the action of alkyl iodides and a silver-containing agent is widely used. In the process of developing more economical derivatization methods, we found a rather unexpected possibility of implementing S-alkylation of organic sulfides with commercial polydialkylsiloxanes (alkyl = CH3 or C2H5) in the presence of triflic acid (CF3SO3H) as a superacid co-alkylating agent. For homologous dibenzothiophenes as a typical model representative of petroleum sulfur-containing aromatic compounds, ESI and MALDI mass spectra exhibited the signals of corresponding S-alkylsulfonium salts with a high signal-to-noise ratio. A rational mechanism for the described chemical transformation is proposed, including the indispensable activation by triflic acid and the cleavage of the Si-C bond. Specific collision-induced dissociation of corresponding S-alkylated sulfonium cations is considered. The applicability of the derivatization approach to the analysis of petroleum products by high-resolution mass spectrometry is demonstrated.

Phosphazene-Containing Epoxy Resins Based on Bisphenol F with Enhanced Heat Resistance and Mechanical Properties: Synthesis and Properties.

Organophosphazenes are of interest due to the combination of increased mechanical and thermal properties of polymer materials obtained with their use, however, they are characterized by a complex multi-stage synthesis. Moreover, the high viscosity of phosphazene-containing epoxy resins (PhER) makes their processing difficult. To simplify the synthesis of PhER, a one-step method was developed, and bisphenol F was chosen, which also provided a decrease in viscosity. In the current study, PhER were formed by a one-stage interaction of hexachlorocyclotriphosphazene (HCP) with bisphenol F isomers and epichlorohydrin in the presence of alkali, which was a mixture of epoxycyclophosphazenes (ECPh) with a functionality from 1 to 4 according to the results of MALDI-TOF analysis. Conventional epoxy resins based on bisphenol F, also formed during the process, showed high mechanical properties and glass transition temperature, and the reactivity of the obtained resins is similar to the base epoxy resins based on bisphenols A and F. Cured PhER had higher or the same mechanical properties compared to base epoxy resins based on bisphenol A and F, and a glass transition temperature comparable to base epoxy resins based on bisphenol F: glass transition temperature (Tg) up to 174.5 °C, tensile strength up to 74.5 MPa, tensile modulus up to 2050 MPa, tensile elongation at break up to 6.22%, flexural strength up to 146.6 MPa, flexural modulus up to 3630 MPa, flexural elongation at break up to 9.15%, and Izod impact strength up to 4.01 kJ/m2. Analysis of the composition of the obtained PhER was carried out by 1H and 31P NMR spectroscopy, MALDI-TOF mass spectrometry, X-ray fluorescence elemental analysis, and contained up to 3.9% phosphorus and from 1.3% to 4.2% chlorine. The temperature profile of the viscosity of the resulting epoxy resins was determined, and the viscosity at 25 °C ranged from 20,000 to 450,000 Pa·s, depending on the ratio of reagents. The resins studied in this work can be cured with conventional curing agents and, with a low content of the phosphazene fraction, can act as modifiers for traditional epoxy resins, being compatible with them, to increase impact strength and elasticity while maintaining the rest of the main mechanical and processing properties, and can be used as a resin component for composite materials, adhesives, and paints.

Copper coordination compounds with (5Z,5Z')-2,2'-(alkane-α,ω-diyldiselenyl)-bis-5-(2-pyridylmethylene)-3,5-dihydro-4H-imidazol-4-ones. Comparison with sulfur analogue.

A series of new organic ligands (5Z,5Z')-2,2'-(alkane-α,ω-diyldiselenyl)-bis-5-(2-pyridylmethylene)-3,5-dihydro-4H-imidazol-4-ones (L) consisting of two 5-(2-pyridylmethylene)-3,5-dihydro-4H-imidazol-4-one units linked with polymethylene chains of various lengths (n = 2-10, where n is the number of CH2 units) have been synthesized. The reactions of these ligands with CuCl2·2H2O and CuClO4·6H2O gave Cu2+ or Cu1+ containing mono- and binuclear complexes with Cu2LCl x (x = 2-4) or CuL(ClO4) y (y = 1, 2) composition. It was shown that the agents reducing Cu2+ to Cu1+ in the course of complex formation can be both a ligand and an organic solvent in which the reaction is carried out. This fundamentally distinguishes the selenium-containing ligands L from their previously described sulfur analogs, which by themselves are not capable of reducing Cu2+ during complexation under the same conditions. A higher cytotoxicity and reasonable selectivity to cancer cell lines for synthesized complexes of selenium-containing ligands was shown; unlike sulfur analogs, ligands L themselves demonstrate a high cytotoxicity, comparable in some cases to the toxicity of copper-containing complexes.

Options of the Main Derivatization Approaches for Analytical ESI and MALDI Mass Spectrometry.

The inclusion of preliminary chemical labeling (derivatization) in the analysis process by such powerful and widespread methods as electrospray ionization (ESI) and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) is a popular and widely used methodological approach. This is due to the need to remove some fundamental limitations inherent in these powerful analytic methods. Although a number of special reviews has been published discussing the utilization of derivatization approaches, the purpose of the present critical review is to comprehensively summarize, characterize and evaluate most of the previously developed and practically applied, as well as recently proposed representative derivatization reagents for ESI-MS and MALDI-MS platforms in their mostly sensitive positive ion mode and frequently hyphenated with separation techniques. The review is focused on the use of preliminary chemical labeling to facilitate the detection, identification, structure elucidation, quantification, profiling or MS imaging of compounds within complex matrices. Two main derivatization approaches, namely the introduction of permanent charge-fixed or highly proton affinitive residues into analytes are critically evaluated. In situ charge-generation, charge-switch and charge-transfer derivatizations are considered separately. The potential of using reactive matrices in MALDI-MS and chemical labeling in MS-based omics sciences is given.

Tandem Synthesis of Ultra-High Molecular Weight Drag Reducing Poly-α-Olefins for Low-Temperature Pipeline Transportation.

Ultra-high molecular weight poly-α-olefins are widely used as drag reducing agents (DRAs) for pipeline transportation of oil and refined petroleum products. The synthesis of polyolefin DRAs is based on low-temperature Ziegler-Natta (ZN) polymerization of higher α-olefins. 1-Hexene based DRAs, the most effective at room temperature, typically lose DR activity at low temperatures. The use of 1-hexene copolymers with C8-C12 linear α-olefins appears to offer a solution to the problem of low-temperature drag reducing. The present work aims to develop two-stage synthesis of polyolefin DRAs that is based on selective oligomerization of ethylene in the presence of efficient chromium/aminodiphosphine catalysts (Cr-PNP), followed by polymerization of the olefin mixtures, formed at oligomerization stage, using efficient titanium-magnesium ZN catalyst. We have shown that oligomerization of ethylene in α-olefin reaction media proceeds faster than in saturated hydrocarbons, providing the formation of 1-hexene, 1-octene, and branched C10 and C12 olefins; the composition and the ratio of the reaction products depended on the nature of PNP ligand. Oligomerizates were used in ZN polymerization 'as is', without additional treatment. Due to branched character of C10+ hydrocarbons, formed during oligomerization of ethylene, resulting polyolefins demonstrate higher low-temperature DR efficiency at low polymer concentrations (~1 ppm) in comparison with benchmark polymers prepared from the mixtures of linear α-olefins and from pure 1-hexene. We assume that faster solubility and more efficient solvation of the polyolefins, prepared using 'tandem' ethylene-based process, represent an advantage of these type polymers over conventional poly(1-hexene) and linear α-olefin-based polymers when used as 'winter' DRAs.

Homobivalent Lamellarin-Like Schiff Bases: In Vitro Evaluation of Their Cancer Cell Cytotoxicity and Multitargeting Anti-Alzheimer's Disease Potential.

Marine alkaloids belonging to the lamellarins family, which incorporate a 5,6-dihydro-1-phenylpyrrolo[2,1-a]isoquinoline (DHPPIQ) moiety, possess various biological activities, spanning from antiviral and antibiotic activities to cytotoxicity against tumor cells and the reversal of multidrug resistance. Expanding a series of previously reported imino adducts of DHPPIQ 2-carbaldehyde, novel aliphatic and aromatic Schiff bases were synthesized and evaluated herein for their cytotoxicity in five diverse tumor cell lines. Most of the newly synthesized compounds were found noncytotoxic in the low micromolar range (<30 µM). Based on a Multi-fingerprint Similarity Search aLgorithm (MuSSeL), mainly conceived for making protein drug target prediction, some DHPPIQ derivatives, especially bis-DHPPIQ Schiff bases linked by a phenylene bridge, were prioritized as potential hits addressing Alzheimer's disease-related target proteins, such as cholinesterases (ChEs) and monoamine oxidases (MAOs). In agreement with MuSSeL predictions, homobivalent para-phenylene DHPPIQ Schiff base 14 exhibited a noncompetitive/mixed inhibition of human acetylcholinesterase (AChE) with Ki in the low micromolar range (4.69 µM). Interestingly, besides a certain inhibition of MAO A (50% inhibition of the cell population growth (IC50) = 12 µM), the bis-DHPPIQ 14 showed a good inhibitory activity on self-induced ß-amyloid (Aß)1-40 aggregation (IC50 = 13 µM), which resulted 3.5-fold stronger than the respective mono-DHPPIQ Schiff base 9.

Recent Advances in Combinations of TLC With MALDI and Other Desorption/Ionization Mass-Spectrometry Techniques.

The combination of planar chromatography with desorption/ionization mass-spectrometry (MS) techniques provides chemists with unique tools for fast and simple separation of mixtures followed by the detection of analytes by the most powerful analytical method. Since its introduction in the early 1990s, thin-layer chromatography (TLC)/matrix-assisted mass spectrometry (MALDI) has been used for the analysis of a wide range of analytes, including natural and synthetic organic compounds. Nowadays, new desorption/ionization approaches have been developed and applied in conjunction with planar chromatography competing with MALDI. This review covers recent developments in the combination of TLC with various desorption/ionization MS methods which were made in recent several years.

New suitable deprotonating matrices for the analysis of carboxylic acids and some acidic compounds by matrix-assisted laser desorption/ionization mass spectrometry in negative ion mode.

RATIONALE: Direct non-derivatization analysis of organic acids and acidic compounds by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) in positive ion mode is not always possible due to the low ionization efficiency of analytes. Some new efficient deprotonating matrices were suggested that allowed the production of negative ions from acidic compounds during MALDI-MS experiments. METHODS: Various tested carboxyl-containing compounds as well as compounds with acidic properties were mixed with the suggested deprotonating matrices [4-dimethylaminobenzaldehyde (DMABA), N,N-dimethylamino-p-phenylenediamine or 3-aminoquinoline] and applied on a standard MALDI target followed by recording MALDI mass spectra in negative ion mode. RESULTS: All the tested acidic compounds mixed with the suggested deprotonating matrices produced abundant [M - H]- ions under MALDI conditions. DMABA produced the strongest signals reflecting greater sensitivity of analysis. CONCLUSIONS: The suggested deprotonating matrices are commercially available compounds and are good alternatives to well-known matrices of this kind and, in particular, the often used 9-aminoacridine. DMABA is the best of the tested potential matrices and is suitable for the detection of low molecular weight carboxyl-containing compounds, substituted phenols, and mixtures of naphthenic acids by (-)MALDI-MS.

Synthesis of Bisphenol A Based Phosphazene-Containing Epoxy Resin with Reduced Viscosity.

Phosphazene-containing epoxy oligomers (PEO) were synthesized by the interaction of hexachlorocyclotriphosphazene (HCP), phenol, and bisphenol A in a medium of excess of epichlorohydrin using potassium carbonate and hydroxide as HCl acceptors with the aim of obtaining a product with lower viscosity and higher phosphazene content. PEOs are mixtures of epoxycyclophosphazene (ECP) and a conventional organic epoxy resin based on bisphenol A in an amount controlled by the ratio of the initial mono- and diphenol. According to 31P NMR spectroscopy, pentasubstituted aryloxycyclotrophosphazene compounds predominate in the ECP composition. The relative content in the ECP radicals of mono- and diphenol was determined by the MALDI-TOF mass spectrometry method. The organic epoxy fraction, according to gas chromatograpy-mass spectrometry (GC-MS), contains 50-70 wt % diglycidyl ether of bisphenol A. PEO resins obtained in the present work have reduced viscosity when compared to other known phosphazene-containging epoxy resins while phosphazene content is still about 50 wt %. Resins with an epoxy number within 12-17 wt %, are cured by conventional curing agents to form compositions with flame-retardant properties, while other characteristics of these compositions are at the level of conventional epoxy materials.

An approach to analysis of primary amines by a combination of thin-layer chromatography and matrix-assisted laser desorption ionization mass spectrometry in conjunction with post-chromatographic derivatization.

On-spot derivatization has been suggested for the modification of primary amine containing compounds for their analysis by thin-layer chromatography hyphenated with matrix-assisted laser desorption ionization mass spectrometry. The proposed approach was based on post-chromatographic treatment of separated analytes inside the chromatographic zones on the thin-layer chromatography plates by tris(2,6-dimethoxyphenyl)methilium reagent. The derivatives, containing permanent positive charge, reveal exceptionally intense peaks of their cationic moieties and high signal/noise ratio in mass spectra recorded directly from the plates. The method was tested on a series of aliphatic, aromatic, and amine-containing pharmaceuticals.

Suitable in-situ derivatization of alcohols by reaction with basic amines in Direct Analysis in Real Time mass spectrometry.

This work highlights the discovered in-situ analytical reaction between primary/secondary alcohols and nitrogenous bases (pyridine, quinoline) that involves the substitution of hydroxyl groups for nitrogen-containing charged species and proceeds in an ionization region of Direct Analysis in Real Time mass spectrometry (DART-MS) instrument at gas stream temperature of 150-450 °C. Resulted cations provide strong signals in mass spectra and this ensures high sensitivity of the analysis. Collision induced dissociation of such precursor ions gives rise to characteristic and simple fragmentation mass spectra revealing mainly protonated nitrogenous bases and carbonium cations resulting from the elimination of neutral nitrogen-containing bases. The dependence of signal response on gas stream temperature was elucidated. It was also found that, independently of gas stream temperature, high volatility low-molecular weight alcohols did not demonstrate characteristic DART spectra owing to a high rate of desorption/evaporation which does not provide sufficient probability of the reaction. To the best of our knowledge, this type of specific reactions in a plasma-based source of DART mass spectrometer is reported for the first time. It represents a new and interesting derivatization approach providing a rapid and sensitive complement method for the detection and identification of individual monools of various origin, profiling plant sterols and other steroid alcohols in different matrices.

Synthesis of Resorcinol-Based Phosphazene-Containing Epoxy Oligomers.

Phosphazene-containing epoxy-resorcinol oligomers (PERO) are synthesized in one stage with the direct interaction of hexachlorocyclotriphosphazene (HCP), resorcinol, and epichlorohydrin in the presence of solid NaOH. Depending on the initial ratio of HCP:resorcinol, PERO contains from 20 to 50 wt.% phosphazene component (2.0⁻4.8% of phosphorus) and have an epoxy group content up to 30 %. Products are characterized using ¹H and 31P NMR spectroscopy, MALDI-TOF mass spectrometry, and elemental analysis. According to mass spectrometry, the phosphazene fractions of PERO include up to 30 individual compounds with a predominance of cyclotriphosphazenes with one unsubstituted chlorine atom and four or five glycidyl groups. PERO has a lower viscosity in comparison with similar resins based on bisphenol A, which can simplify their use as a binder for polymer composites, adhesives, and paints.

Monolithic thin-layer chromatography plates with covalently bonded matrix for hyphenation with matrix-assisted laser desorption/ionization.

Monolithic layers prepared by the copolymerization of ethylene dimethacrylate and glycidyl methacrylate and deposited onto the surface of glass and silicon plates were investigated as thin-layer chromatography separation media in hyphenated thin-layer chromatography with matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) analysis. Varying composition of the polymerization mixture and polymerization conditions layers of different porosities and MALDI-MS compatibility were synthesized. Compatibility with MALDI-MS was tested using polyethylene glycol and it was demonstrated that layers prepared without glycidyl methacrylate are not compatible with MALDI-MS and do not allow obtaining any mass spectra. Best results were achieved with layers containing 19 to 29% glycidyl methacrylate. These layers allow the measurement of mass spectra without additional depositing matrix compounds supplying mass spectra almost "clean" in low molar mass range.