Stirring-Free Scalable Electrosynthesis Enabled by Alternating Current.

Alternating current (AC) electrolysis is receiving increased interest as a versatile tool for mild and selective electrochemical transformations. This work demonstrates that AC can enable the concept of a stirring-free electrochemical reactor where the periodic switch of electrode polarity, inherent to AC, provides uniform electrolysis across the whole volume of the reactor. Such design implies a straightforward approach for scaling up electrosynthesis. This was demonstrated on the range of electrochemical transformations performed in three different RVC-packed reactors on up to a 50-mmol scale. Redox-neutral, oxidative, and reductive processes were successfully implemented using the suggested design and the applicable frequency ranges were further investigated for different types of reactions. The advantages of the AC-enabled design - such as the absence of stirring and a maximized surface area of the electrodes - provide the possibility for its universal application both for small-scale screening experimentation and large-scale preparative electrosynthesis without significant optimization needed in between.

Nucleophilic Substitution Reactions in the [B3H8]- Anion in the Presence of Lewis Acids.

As a result of our study on the interaction between the octahydrotriborate anion with nucleophiles (Nu = THF, Ph3P, Ph2P-(CH2)2-PPh2 (dppe), Ph3As, Et3N, PhNH2, C5H5N, CH3CN, Ph2CHCN)) in the presence of a wide range of Lewis acids (Ti(IV), Hf(IV), Zr(IV), Al, Cu(I), Zn, Mn(II), Co(II) halides and iodine), a number of substituted derivatives of the octahydrotriborate anion [B3H7Nu] are obtained. It is found that the use of TiCl4, AlCl3, ZrCl4, HfCl4, CuCl and iodine leads to the highest product yields. In this case, it is most likely that the reaction proceeds through the formation of an intermediate [B3H7-HMXnx], which was detected by NMR spectroscopy. The structures of [Ph3P·B3H7] and [PhNH2·B3H7] were determined by X-ray diffraction.

Synthesis of Hafnium(IV) Polyaminoacetates.

The interaction of hafnium(IV) salts (oxide-dichloride, chloride, and bromide) with nitrilotriacetic acid (NTA), diethylenetriamminepentaacetic acid (DTPA), 1,2-diaminocyclohexanetetraacetic acid (CDTA), 1,3-dipropylmino-2-hydroxy N,N,N',N'-tetraacetic acid (dpta), and N-(2-hydroxyethyl)ethylenediamine triacetic acid (HEDTA) has been studied. The corresponding complexes Na2[Hf(NTA)2]·3H2O (1), Na[HfDTPA]·3H2O (2), [HfCDTA(H2O)2] (3), and Na[Hf2(dpta)2]·7.5H2O·0.5C2H5OH (4) have been isolated and characterized and their structures have been determined by single crystal X-ray diffraction. Biological studies of [HfCDTA(H2O)2] have shown that in 5% glucose solution this complex has low toxicity and good contrasting ability.

Coupling of Alternating Current to Transition-Metal Catalysis: Examples of Nickel-Catalyzed Cross-Coupling.

The coupling of transition-metal to photoredox catalytic cycles through single-electron transfer steps has become a powerful tool in the development of catalytic processes. In this work, we demonstrated that transition-metal catalysis can be coupled to alternating current (AC) through electron transfer steps that occur periodically at the same electrode. AC-assisted Ni-catalyzed amination, etherification, and esterification of aromatic bromides showed higher yields and selectivity compared to that observed in the control experiments with direct current. Our mechanistic studies suggested the importance of both reduction and oxidation processes in the maintenance of the AC-assisted catalytic reactions. As described in presented examples, the AC assistance should be well-suited for catalytic cycles involving reductive elimination or oxidative addition as a limiting step.