Predicting quantum emitter fluctuations with time-series forecasting models.

2D materials have important fundamental properties allowing for their use in many potential applications, including quantum computing. Various Van der Waals materials, including Tungsten disulfide (WS2), have been employed to showcase attractive device applications such as light emitting diodes, lasers and optical modulators. To maximize the utility and value of integrated quantum photonics, the wavelength, polarization and intensity of the photons from a quantum emission (QE) must be stable. However, random variation of emission energy, caused by the inhomogeneity in the local environment, is a major challenge for all solid-state single photon emitters. In this work, we assess the random nature of the quantum fluctuations, and we present time series forecasting deep learning models to analyse and predict QE fluctuations for the first time. Our trained models can roughly follow the actual trend of the data and, under certain data processing conditions, can predict peaks and dips of the fluctuations. The ability to anticipate these fluctuations will allow physicists to harness quantum fluctuation characteristics to develop novel scientific advances in quantum computing that will greatly benefit quantum technologies.

Programmable nanowrinkle-induced room-temperature exciton localization in monolayer WSe2.

Localized states in two-dimensional (2D) transition metal dichalcogenides (TMDCs) have been the subject of intense study, driven by potential applications in quantum information science. Despite the rapidly growing knowledge surrounding these emitters, their microscopic nature is still not fully understood, limiting their production and application. Motivated by this challenge, and by recent theoretical and experimental evidence showing that nanowrinkles generate strain-localized room-temperature emitters, we demonstrate a method to intentionally induce wrinkles with collections of stressors, showing that long-range wrinkle direction and position are controllable with patterned array design. Nano-photoluminescence (nano-PL) imaging combined with detailed strain modeling based on measured wrinkle topography establishes a correlation between wrinkle properties, particularly shear strain, and localized exciton emission. Beyond the array-induced wrinkles, nano-PL spatial maps further reveal that the strain environment around individual stressors is heterogeneous due to the presence of fine wrinkles that are less deterministic. At cryogenic temperatures, antibunched emission is observed, confirming that the nanocone-induced strain is sufficiently large for the formation of quantum emitters. At 300 K, detailed nanoscale hyperspectral images uncover a wide range of low-energy emission peaks originating from the fine wrinkles, and show that the states can be tightly confined to regions <10 nm, even in ambient conditions. These results establish a promising potential route towards realizing room temperature quantum emission in 2D TMDC systems.

Incommensurate Antiferromagnetic Order in Weakly Frustrated Two-Dimensional van der Waals Insulator CrPSe3.

Although magnetic order is suppressed by a strong frustration, it appears in complex forms such as a cycloid or spin density wave in weakly frustrated systems. Herein, we report a weakly magnetically frustrated two-dimensional (2D) van der Waals material CrPSe3. Polycrystalline CrPSe3 was synthesized at an optimized temperature of 700 °C to avoid the formation of any secondary phases (e.g., Cr2Se3). The antiferromagnetic transition appeared at TN ≈ 127 K with a large Curie-Weiss temperature θCW ≈ -301 K via magnetic susceptibility measurements, indicating weak frustration in CrPSe3 with a frustration factor of f (|θCW|/TN) ≈ 2.4. Evidently, the formation of a long-range incommensurate antiferromagnetic order was revealed by neutron diffraction measurements at low temperatures (below 120 K). The monoclinic crystal structure of the C2/m symmetry is preserved over the studied temperature range down to 20 K, as confirmed by Raman spectroscopy measurements. Our findings on the incommensurate antiferromagnetic order in 2D magnetic materials, not previously observed in the MPX3 family, are expected to enrich the physics of magnetism at the 2D limit, thereby opening opportunities for their practical applications in spintronics and quantum devices.

Direct nano-imaging of light-matter interactions in nanoscale excitonic emitters.

Strong light-matter interactions in localized nano-emitters placed near metallic mirrors have been widely reported via spectroscopic studies in the optical far-field. Here, we report a near-field nano-spectroscopic study of localized nanoscale emitters on a flat Au substrate. Using quasi 2-dimensional CdSe/CdxZn1-xS nanoplatelets, we observe directional propagation on the Au substrate of surface plasmon polaritons launched from the excitons of the nanoplatelets as wave-like fringe patterns in the near-field photoluminescence maps. These fringe patterns were confirmed via extensive electromagnetic wave simulations to be standing-waves formed between the tip and the edge-up assembled nano-emitters on the substrate plane. We further report that both light confinement and in-plane emission can be engineered by tuning the surrounding dielectric environment of the nanoplatelets. Our results lead to renewed understanding of in-plane, near-field electromagnetic signal transduction from the localized nano-emitters with profound implications in nano and quantum photonics as well as resonant optoelectronics.

Automatic detection of multilayer hexagonal boron nitride in optical images using deep learning-based computer vision.

Computer vision algorithms can quickly analyze numerous images and identify useful information with high accuracy. Recently, computer vision has been used to identify 2D materials in microscope images. 2D materials have important fundamental properties allowing for their use in many potential applications, including many in quantum information science and engineering. One such material is hexagonal boron nitride (hBN), an isomorph of graphene with a very indistinguishable layered structure. In order to use these materials for research and product development, the most effective method is mechanical exfoliation where single-layer 2D crystallites must be prepared through an exfoliation procedure and then identified using reflected light optical microscopy. Performing these searches manually is a time-consuming and tedious task. Deploying deep learning-based computer vision algorithms for 2D material search can automate the flake detection task with minimal need for human intervention. In this work, we have implemented a new deep learning pipeline to classify crystallites of hBN based on coarse thickness classifications in reflected-light optical micrographs. We have used DetectoRS as the object detector and trained it on 177 images containing hexagonal boron nitride (hBN) flakes of varying thickness. The trained model achieved a high detection accuracy for the rare category of thin flakes ([Formula: see text] atomic layers thick). Further analysis shows that our proposed pipeline could be generalized to various microscope settings and is robust against changes in color or substrate background.

Historic Clinical Trial External Control Arm Provides Actionable GEN-1 Efficacy Estimate Before a Randomized Trial.

PURPOSE: To inform continued development of the novel immune agent GEN-1, we compared ovarian cancer patients' end points from a neoadjuvant single-arm phase IB study with those of similar historic clinical trial (HCT) patients who received standard neoadjuvant chemotherapy. METHODS: Applying OVATION-1 trial (ClinicalTrials.gov identifier: NCT02480374) inclusion and exclusion criteria to Medidata HCT data, we identified historical trial patients for comparison. Integrating patient-level Medidata historic trial data (N = 41) from distinct neoadjuvant ovarian phase I-III trials with patient-level OVATION-1 data (N = 18), we selected Medidata patients with similar baseline characteristics as OVATION-1 patients using propensity score methods to create an external control arm (ECA). RESULTS: Fifteen OVATION-1 patients (15 of 18, 83%) were matched to 15 (37%, 15 of 41) Medidata historical trial control patients. Matching attenuated preexisting differences in attributes between the groups. The median progression-free survival time was not reached by the OVATION-1 group and was 15.8 months (interquartile range, 11.40 months to nonestimable) for the ECA. The hazard of progression was 0.53 (95% CI, 0.16 to 1.73), favoring GEN-1 patients. Compared with ECA patients, OVATION-1 patients had more nausea, fatigue, chills, and infusion-related reactions. CONCLUSION: Comparing results of a single-arm early-phase trial to those of a rigorously matched HCT ECA yielded insights regarding comparative efficacy prior to a randomized controlled trial. The effect size estimate itself informed both the decision to continue development and the randomized phase II trial (ClinicalTrials.gov identifier: NCT03393884) sample size. The work illustrates the potential of HCT data to inform drug development.

Theoretical quantum model of two-dimensional propagating plexcitons.

When plasmonic excitations of metallic interfaces and nanostructures interact with electronic excitations in semiconductors, new states emerge that hybridize the characteristics of the uncoupled states. The engendered properties make these hybrid states appealing for a broad range of applications, ranging from photovoltaic devices to integrated circuitry for quantum devices. Here, through quantum modeling, the coupling of surface plasmon polaritons and mobile two-dimensional excitons such as those in atomically thin semiconductors is examined with emphasis on the case of strong coupling. Our model shows that at around the energy crossing of the dispersion relationships of the uncoupled species, they strongly interact and polariton states-propagating plexcitons-emerge. The temporal evolution of the system where surface plasmon polaritons are continuously injected into the system is simulated to gain initial insight on potential experimental realizations of these states. The results show a steady state that is dominated by the lower-energy polariton. The study theoretically further establishes the possible existence of propagating plexcitons in atomically thin semiconductors and provides important guidance for the experimental detection and characterization of such states for a wide range of optoelectronic technologies.

Nanoscale Raman Characterization of a 2D Semiconductor Lateral Heterostructure Interface.

The nature of the interface in lateral heterostructures of 2D monolayer semiconductors including its composition, size, and heterogeneity critically impacts the functionalities it engenders on the 2D system for next-generation optoelectronics. Here, we use tip-enhanced Raman scattering (TERS) to characterize the interface in a single-layer MoS2/WS2 lateral heterostructure with a spatial resolution of 50 nm. Resonant and nonresonant TERS spectroscopies reveal that the interface is alloyed with a size that varies over an order of magnitude─from 50 to 600 nm─within a single crystallite. Nanoscale imaging of the continuous interfacial evolution of the resonant and nonresonant Raman spectra enables the deconvolution of defect activation, resonant enhancement, and material composition for several vibrational modes in single-layer MoS2, MoxW1-xS2, and WS2. The results demonstrate the capabilities of nanoscale TERS spectroscopy to elucidate macroscopic structure-property relationships in 2D materials and to characterize lateral interfaces of 2D systems on length scales that are imperative for devices.

Anisotropic 2D excitons unveiled in organic-inorganic quantum wells.

Two-dimensional (2D) excitons arise from electron-hole confinement along one spatial dimension. Such excitations are often described in terms of Frenkel or Wannier limits according to the degree of exciton spatial localization and the surrounding dielectric environment. In hybrid material systems, such as the 2D perovskites, the complex underlying interactions lead to excitons of an intermediate nature, whose description lies somewhere between the two limits, and a better physical description is needed. Here, we explore the photophysics of a tuneable materials platform where covalently bonded metal-chalcogenide layers are spaced by organic ligands that provide confinement barriers for charge carriers in the inorganic layer. We consider self-assembled, layered bulk silver benzeneselenolate, [AgSePh]∞, and use a combination of transient absorption spectroscopy and ab initio GW plus Bethe-Salpeter equation calculations. We demonstrate that in this non-polar dielectric environment, strongly anisotropic excitons dominate the optical transitions of [AgSePh]∞. We find that the transient absorption measurements at room temperature can be understood in terms of low-lying excitons confined to the AgSe planes with in-plane anisotropy, featuring anisotropic absorption and emission. Finally, we present a pathway to control the exciton behaviour by changing the chalcogen in the material lattice. Our studies unveil unexpected excitonic anisotropies in an unexplored class of tuneable, yet air-stable, hybrid quantum wells, offering design principles for the engineering of an ordered, yet complex dielectric environment and its effect on the excitonic phenomena in such emerging materials.

Drug development of lyso-thermosensitive liposomal doxorubicin: Combining hyperthermia and thermosensitive drug delivery.

We review the drug development of lyso-thermosensitive liposomal doxorubicin (LTLD) which is the first heat-activated formulation of a liposomal drug carrier to be utilized in human clinical trials. This class of compounds is designed to carry a payload of a cytotoxic agent and adequately circulate in order to accumulate at a tumor that is being heated. At the target the carrier is activated by heat and releases its contents at high concentrations. We summarize the preclinical and clinical experience of LTLD including its successes and challenges in the development process.

GEN-1 in Combination with Neoadjuvant Chemotherapy for Patients with Advanced Epithelial Ovarian Cancer: A Phase I Dose-escalation Study.

PURPOSE: GEN-1 (phIL-12-005/PPC), an IL12 plasmid formulated with polyethyleneglycol-polyethyleneimine cholesterol lipopolymer, has preclinical activity when combined with platinum-taxane intravenous chemotherapy and administered intraperitoneally in epithelial ovarian cancer (EOC) models. OVATION I was a multicenter, nonrandomized, open-label phase IB trial to evaluate the safety, preliminary antitumor activity, and immunologic response to GEN-1 in combination with neoadjuvant chemotherapy (NACT) carboplatin-paclitaxel in patients with advanced EOC. PATIENTS AND METHODS: A total of 18 patients with newly diagnosed stage IIIC and IV EOC were enrolled. A standard 3+3 dose-escalation design tested four GEN-1 doses (36, 47, 61, 79 mg/m2) to determine the maximum tolerated dose and dose-limiting toxicities (DLTs). GEN-1 was administered in eight weekly intraperitoneal infusions starting at cycle 1 week 2 in combination with three 21-day cycles of NACT carboplatin AUC 6 and weekly paclitaxel 80 mg/m2. RESULTS: The most common treatment-emergent adverse events at least possibly related were nausea, fatigue, abdominal pain/cramping, anorexia, diarrhea, and vomiting. Eight patients experience grade 4 neutropenia attributed to NACT. No DLTs occurred. A total of 14 patients were evaluable for response and 12 (85.7%) had radiological response (two complete response and 10 partial response) prior to debulking; nine were R0 at debulking and one patient had complete pathologic response. IL12 and its downstream cytokine, IFNγ, increased in peritoneal washings but not as much in blood. Increased levels of myeloid dendritic cells and T-effector memory cells in peritoneal fluid, plus elevated CD8+ T cells and reduced immunosuppression within the tumor microenvironment were found. A median time to treatment failure of 18.4 months (95% confidence interval, 9.2-24.5) was observed in the intention-to-treat population. CONCLUSIONS: Adding GEN-1 to standard NACT is safe, appears active, and has an impact on the tumor microenvironment.

Controlled and Stable Patterning of Diverse Inorganic Nanocrystals on Crystalline Two-Dimensional Protein Arrays.

Controlled patterning of nanoparticles on bioassemblies enables synthesis of complex materials for applications in optics, nanoelectronics, and sensing. Biomolecular self-assembly offers molecular control for engineering patterned nanomaterials, but current approaches have been limited in their ability to combine high nanoparticle coverage with generality that enables incorporation of multiple nanoparticle types. Here, we synthesize photonic materials on crystalline two-dimensional (2D) protein sheets using orthogonal bioconjugation reactions, organizing quantum dots (QDs), gold nanoparticles (AuNPs), and upconverting nanoparticles along the surface-layer (S-layer) protein SbsB from the extremophile Geobacillus stearothermophilus. We use electron and optical microscopy to show that isopeptide bond-forming SpyCatcher and SnoopCatcher systems enable the simultaneous and controlled conjugation of multiple types of nanoparticles (NPs) at high densities along the SbsB sheets. These NP conjugation reactions are orthogonal to each other and to Au-thiol bond formation, allowing tailorable nanoparticle combinations at sufficient labeling efficiencies to permit optical interactions between nanoparticles. Fluorescence lifetime imaging of SbsB sheets conjugated to QDs and AuNPs at distinct attachment sites shows spatially heterogeneous QD emission, with shorter radiative decays and brighter fluorescence arising from plasmonic enhancement at short interparticle distances. This specific, stable, and efficient conjugation of NPs to 2D protein sheets enables the exploration of interactions between pairs of nanoparticles at defined distances for the engineering of protein-based photonic nanomaterials.

Strongly Quantum-Confined Blue-Emitting Excitons in Chemically Configurable Multiquantum Wells.

Light matter interactions are greatly enhanced in two-dimensional (2D) semiconductors because of strong excitonic effects. Many optoelectronic applications would benefit from creating stacks of atomically thin 2D semiconductors separated by insulating barrier layers, forming multiquantum-well structures. However, most 2D transition metal chalcogenide systems require serial stacking to create van der Waals multilayers. Hybrid metal organic chalcogenolates (MOChas) are self-assembling hybrid materials that combine multiquantum-well properties with scalable chemical synthesis and air stability. In this work, we use spatially resolved linear and nonlinear optical spectroscopies over a range of temperatures to study the strongly excitonic optical properties of mithrene, that is, silver benzeneselenolate, and its synthetic isostructures. We experimentally probe s-type bright excitons and p-type excitonic dark states formed in the quantum confined 2D inorganic monolayers of silver selenide with exciton binding energy up to ∼0.4 eV, matching recent theoretical predictions of the material class. We further show that mithrene's highly efficient blue photoluminescence, ultrafast exciton radiative dynamics, as well as flexible tunability of molecular structure and optical properties demonstrate great potential of MOChas for constructing optoelectronic and quantum excitonic devices.

The ultrafast onset of exciton formation in 2D semiconductors.

The equilibrium and non-equilibrium optical properties of single-layer transition metal dichalcogenides (TMDs) are determined by strongly bound excitons. Exciton relaxation dynamics in TMDs have been extensively studied by time-domain optical spectroscopies. However, the formation dynamics of excitons following non-resonant photoexcitation of free electron-hole pairs have been challenging to directly probe because of their inherently fast timescales. Here, we use extremely short optical pulses to non-resonantly excite an electron-hole plasma and show the formation of two-dimensional excitons in single-layer MoS2 on the timescale of 30 fs via the induced changes to photo-absorption. These formation dynamics are significantly faster than in conventional 2D quantum wells and are attributed to the intense Coulombic interactions present in 2D TMDs. A theoretical model of a coherent polarization that dephases and relaxes to an incoherent exciton population reproduces the experimental dynamics on the sub-100-fs timescale and sheds light into the underlying mechanism of how the lowest-energy excitons, which are the most important for optoelectronic applications, form from higher-energy excitations. Importantly, a phonon-mediated exciton cascade from higher energy states to the ground excitonic state is found to be the rate-limiting process. These results set an ultimate timescale of the exciton formation in TMDs and elucidate the exceptionally fast physical mechanism behind this process.

Electrically driven photon emission from individual atomic defects in monolayer WS2.

Quantum dot-like single-photon sources in transition metal dichalcogenides (TMDs) exhibit appealing quantum optical properties but lack a well-defined atomic structure and are subject to large spectral variability. Here, we demonstrate electrically stimulated photon emission from individual atomic defects in monolayer WS2 and directly correlate the emission with the local atomic and electronic structure. Radiative transitions are locally excited by sequential inelastic electron tunneling from a metallic tip into selected discrete defect states in the WS2 bandgap. Coupling to the optical far field is mediated by tip plasmons, which transduce the excess energy into a single photon. The applied tip-sample voltage determines the transition energy. Atomically resolved emission maps of individual point defects closely resemble electronic defect orbitals, the final states of the optical transitions. Inelastic charge carrier injection into localized defect states of two-dimensional materials provides a powerful platform for electrically driven, broadly tunable, atomic-scale single-photon sources.

Imaging strain-localized excitons in nanoscale bubbles of monolayer WSe2 at room temperature.

In monolayer transition-metal dichalcogenides, localized strain can be used to design nanoarrays of single photon sources. Despite strong empirical correlation, the nanoscale interplay between excitons and local crystalline structure that gives rise to these quantum emitters is poorly understood. Here, we combine room-temperature nano-optical imaging and spectroscopic analysis of excitons in nanobubbles of monolayer WSe2 with atomistic models to study how strain induces nanoscale confinement potentials and localized exciton states. The imaging of nanobubbles in monolayers with low defect concentrations reveals localized excitons on length scales of around 10 nm at multiple sites around the periphery of individual nanobubbles, in stark contrast to predictions of continuum models of strain. These results agree with theoretical confinement potentials atomistically derived from the measured topographies of nanobubbles. Our results provide experimental and theoretical insights into strain-induced exciton localization on length scales commensurate with exciton size, realizing key nanoscale structure-property information on quantum emitters in monolayer WSe2.

Facile and quantitative estimation of strain in nanobubbles with arbitrary symmetry in 2D semiconductors verified using hyperspectral nano-optical imaging.

When layers of van der Waals materials are deposited via exfoliation or viscoelastic stamping, nanobubbles are sometimes created from aggregated trapped fluids. Though they can be considered a nuisance, nanobubbles have attracted scientific interest in their own right owing to their ability to generate large in-plane strain gradients that lead to rich optoelectronic phenomena, especially in the semiconducting transition metal dichalcogenides. Determination of the strain within the nanobubbles, which is crucial to understanding these effects, can be approximated using elasticity theory. However, the Föppl-von Kármán equations that describe strain in a distorted thin plate are highly nonlinear and often necessitate assuming circular symmetry to achieve an analytical solution. Here, we present an easily implemented numerical method to solve for strain tensors of nanobubbles with arbitrary symmetry in 2D crystals. The method only requires topographic information from atomic force microscopy and the Poisson ratio of the 2D material. We verify that this method reproduces the strain for circularly symmetric nanobubbles that have known analytical solutions. Finally, we use the method to reproduce the Grüneisen parameter of the E' mode for 1L-WS2 nanobubbles on template-stripped Au by comparing the derived strain with measured Raman shifts from tip-enhanced Raman spectroscopy, demonstrating the utility of our method for estimating localized strain in 2D crystals.

Long-Range Exciton Diffusion in Two-Dimensional Assemblies of Cesium Lead Bromide Perovskite Nanocrystals.

Förster resonant energy transfer (FRET)-mediated exciton diffusion through artificial nanoscale building block assemblies could be used as an optoelectronic design element to transport energy. However, so far, nanocrystal (NC) systems supported only diffusion lengths of 30 nm, which are too small to be useful in devices. Here, we demonstrate a FRET-mediated exciton diffusion length of 200 nm with 0.5 cm2/s diffusivity through an ordered, two-dimensional assembly of cesium lead bromide perovskite nanocrystals (CsPbBr3 PNCs). Exciton diffusion was directly measured via steady-state and time-resolved photoluminescence (PL) microscopy, with physical modeling providing deeper insight into the transport process. This exceptionally efficient exciton transport is facilitated by PNCs' high PL quantum yield, large absorption cross section, and high polarizability, together with minimal energetic and geometric disorder of the assembly. This FRET-mediated exciton diffusion length matches perovskites' optical absorption depth, thus enabling the design of device architectures with improved performances and providing insight into the high conversion efficiencies of PNC-based optoelectronic devices.

How Substitutional Point Defects in Two-Dimensional WS2 Induce Charge Localization, Spin-Orbit Splitting, and Strain.

Control of impurity concentrations in semiconducting materials is essential to device technology. Because of their intrinsic confinement, the properties of two-dimensional semiconductors such as transition metal dichalcogenides (TMDs) are more sensitive to defects than traditional bulk materials. The technological adoption of TMDs is dependent on the mitigation of deleterious defects and guided incorporation of functional foreign atoms. The first step toward impurity control is the identification of defects and assessment of their electronic properties. Here, we present a comprehensive study of point defects in monolayer tungsten disulfide (WS2) grown by chemical vapor deposition using scanning tunneling microscopy/spectroscopy, CO-tip noncontact atomic force microscopy, Kelvin probe force spectroscopy, density functional theory, and tight-binding calculations. We observe four different substitutional defects: chromium (CrW) and molybdenum (MoW) at a tungsten site, oxygen at sulfur sites in both top and bottom layers (OS top/bottom), and two negatively charged defects (CD type I and CD type II). Their electronic fingerprints unambiguously corroborate the defect assignment and reveal the presence or absence of in-gap defect states. CrW forms three deep unoccupied defect states, two of which arise from spin-orbit splitting. The formation of such localized trap states for CrW differs from the MoW case and can be explained by their different d shell energetics and local strain, which we directly measured. Utilizing a tight-binding model the electronic spectra of the isolectronic substitutions OS and CrW are mimicked in the limit of a zero hopping term and infinite on-site energy at a S and W site, respectively. The abundant CDs are negatively charged, which leads to a significant band bending around the defect and a local increase of the contact potential difference. In addition, CD-rich domains larger than 100 nm are observed, causing a work function increase of 1.1 V. While most defects are electronically isolated, we also observed hybrid states formed between CrW dimers. The important role of charge localization, spin-orbit coupling, and strain for the formation of deep defect states observed at substitutional defects in WS2 as reported here will guide future efforts of targeted defect engineering and doping of TMDs.

Planar Aperiodic Arrays as Metasurfaces for Optical Near-Field Patterning.

Plasmonic metasurfaces have spawned the field of flat optics using nanostructured planar metallic or dielectric surfaces that can replace bulky optical elements and enhance the capabilities of traditional far-field optics. Furthermore, the potential of flat optics can go far beyond far-field modulation and can be exploited for functionality in the near-field itself. Here, we design metasurfaces based on aperiodic arrays of plasmonic Au nanostructures for tailoring the optical near-field in the visible and near-infrared spectral range. The basic element of the arrays is a rhomboid that is modulated in size, orientation, and position to achieve the desired functionality of the micron-size metasurface structure. Using two-photon-photoluminescence as a tool to probe the near-field profiles in the plane of the metasurfaces, we demonstrate the molding of light into different near-field intensity patterns and active pattern control via the far-field illumination. Finite element method simulations reveal that the near-field modulation occurs via a combination of the plasmonic resonances of the rhomboids and field enhancement in the nanoscale gaps in between the elements. This approach enables optical elements that can switch the near-field distribution across the metasurface via wavelength and polarization of the incident far-field light and provides pathways for light matter interaction in integrated devices.